Enter the date of production
Hello
While doing confirmation in SRM 7.0 , SP 07 , i am getting error as "Enter the date of production". any body aware of this issue.
Regards
Ashish
4. Question:
You use Transaction MIGO to enter a goods receipt for the purchase order . When you post the goods movement, the system issues error message 12 018: "Enter the date of production".
After you enter the production date, the system issues message 12 006 "Existing SLED (&1) has been changed to &2 by the program", however, the original date is still displayed. Was the document updated correctly with the new SLED anyhow?
Answer:
The material document has been posted with the correct, changed date - even if no change occurred on the screen, and as a result the current date could not be displayed.
This system response is also described in Note 212342, point 2 'New system response', which is valid for materials managed in batches and those that are not managed in batches.
faq :- Note 519303 - FAQ: Goods movement with Transaction MIGO
Note 212342 - 12018: SLED is not copied
Symptom
You enter a goods receipt for the purchase order by using Transaction MIGO. The material ordered is to be handled in batches in this case.Error message 12018 "Enter the date of production" is issued when you post the goods movement.However, the system also generates this error message when you have entered the date of production.
Furthermore the date of production on tab page 'Batch' is always overwritten by the date of production from the batch master record provided the batch is already marked in the purchase order
Similar Messages
-
BAPI_GOODSMVT_CREATE error: Enter the date of production.
Hi,
Referring to the subject, I am getting error when i try to use BAPI_GOODSMVT_CREATE to do "Goods Receipts for Prod Order".
The error is asking me to "Enter the date of production".
GM_CODE has been assigned to 02. Posting date and doc date are set to local date.
As for the GOODSMVT_ITEM parameter, I am passing in plant, storage loc, quantity, movement type, batch no, delivery note, CO production order, movement indicator and propose quantities.
Anyone encounter this error before? Please share your experience and perhaps the solution.
Thanks.hi
give production date which is in the line of item
and if u dont want to do that and u have rights to change in spro then plz do folloing
go to OMJX there u will find field prod date just make it display
reward if useful
regards
kunal -
How can I enter the data from the recordset into your insert query
Hi
i would like to know how I can enter the data from the recordset into your insert query without using a hidden field.
thanks
------------------------------------------------------------------------------------Below is the code------------------------------------------------------------------------------------- -----
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
$insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['com_topic'], "int"),
GetSQLValueString($_POST['commentby'], "int"),
GetSQLValueString($_POST['title'], "text"),
GetSQLValueString($_POST['com_content'], "text"),
GetSQLValueString($_POST['com_date'], "text"),
GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsTopics = "SELECT topic_id, topic FROM topics ORDER BY topic_date DESC";
$rsTopics = mysql_query($query_rsTopics, $ezzyConn) or die(mysql_error());
$row_rsTopics = mysql_fetch_assoc($rsTopics);
$totalRows_rsTopics = mysql_num_rows($rsTopics);
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsOnline = "SELECT online_id, `online` FROM `online` ORDER BY online_id DESC";
$rsOnline = mysql_query($query_rsOnline, $ezzyConn) or die(mysql_error());
$row_rsOnline = mysql_fetch_assoc($rsOnline);
$totalRows_rsOnline = mysql_num_rows($rsOnline);
$colname_rsCommentby = "-1";
if (isset($_SESSION['MM_Username'])) {
$colname_rsCommentby = $_SESSION['MM_Username'];
mysql_select_db($database_ezzyConn, $ezzyConn);
$query_rsCommentby = sprintf("SELECT user_id, username FROM users WHERE username = %s", GetSQLValueString($colname_rsCommentby, "text"));
$rsCommentby = mysql_query($query_rsCommentby, $ezzyConn) or die(mysql_error());
$row_rsCommentby = mysql_fetch_assoc($rsCommentby);
$totalRows_rsCommentby = mysql_num_rows($rsCommentby);
?>
<?php include("../includes/access.php"); ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>ezzybay - easy click, ezzy shopping</title>
<link href="../css/global.css" rel="stylesheet" type="text/css" />
<link href="../css/navigation.css" rel="stylesheet" type="text/css" />
</head>
<body>
<div id="wrapper">
<?php include("../includes/top.php"); ?>
<div id="content">
<div id="pageTitle">
<h2>CMS Section:</h2>
<p>Comment Topics Page</p>
</div>
<?php include("../includes/leftnav.php"); ?>
<div id="mainContent">
<form action="<?php echo $editFormAction; ?>" method="post" name="frmpostComment" id="frmpostComment">
<table align="center">
<caption>Post Comment</caption>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Topic:</td>
<td><select name="com_topic" class="listbox" id="com_topic">
<?php
do {
?>
<option value="<?php echo $row_rsTopics['topic_id']?>"><?php echo $row_rsTopics['topic']?></option>
<?php
} while ($row_rsTopics = mysql_fetch_assoc($rsTopics));
$rows = mysql_num_rows($rsTopics);
if($rows > 0) {
mysql_data_seek($rsTopics, 0);
$row_rsTopics = mysql_fetch_assoc($rsTopics);
?>
</select></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Title:</td>
<td><input name="title" type="text" class="textfield" value="" size="32" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right" valign="top">Comment:</td>
<td><textarea name="com_content" cols="50" rows="5" class="textarea"></textarea></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right">Status:</td>
<td><select name="online_id" class="smalllistbox">
<?php
do {
?>
<option value="<?php echo $row_rsOnline['online_id']?>" <?php if (!(strcmp($row_rsOnline['online_id'], 2))) {echo "SELECTED";} ?>><?php echo $row_rsOnline['online']?></option>
<?php
} while ($row_rsOnline = mysql_fetch_assoc($rsOnline));
?>
</select></td>
</tr>
<tr> </tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"> </td>
<td><input type="submit" class="button" value="Insert record" /></td>
</tr>
</table>
<input name="commentby" type="hidden" id="commentby" value="<?php echo $row_rsCommentby['user_id']; ?>" />
<input type="hidden" name="com_date" value="<?php echo date("d/m/y : H:i:s", time()) ?>" />
<input type="hidden" name="MM_insert" value="frmpostComment" />
</form>
</div>
</div>
<?php include("../includes/footer.php"); ?>
</div>
</body>
</html>
<?php
mysql_free_result($rsTopics);
mysql_free_result($rsOnline);
mysql_free_result($rsCommentby);
?>I'll keep it simple and only use the date as an example. Hopefully you get the concept from the example. Basically you create a recordset and insert the recordset value instead of the POST value into your insert query. In the example below I declared a variable for $the_date and entered the variable into the INSERT query instead of the hidden POST field.
<?php require_once('../../Connections/ezzyConn.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$the_date = date("d/m/y : H:i:s", time());
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_insert"])) && ($_POST["MM_insert"] == "frmpostComment")) {
$insertSQL = sprintf("INSERT INTO comments (com_topic, com_user, title, com_content, com_date, online_id) VALUES (%s, %s, %s, %s, %s, %s)",
GetSQLValueString($_POST['com_topic'], "int"),
GetSQLValueString($_POST['commentby'], "int"),
GetSQLValueString($_POST['title'], "text"),
GetSQLValueString($_POST['com_content'], "text"),
GetSQLValueString($the_date, "text"),
GetSQLValueString($_POST['online_id'], "int"));
mysql_select_db($database_ezzyConn, $ezzyConn);
$Result1 = mysql_query($insertSQL, $ezzyConn) or die(mysql_error());
$insertGoTo = "index.php";
if (isset($_SERVER['QUERY_STRING'])) {
$insertGoTo .= (strpos($insertGoTo, '?')) ? "&" : "?";
$insertGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $insertGoTo));
?> -
When ever enter the date start date up to next year same date between the days divided into 8 parts
when ever enter the date start date up to next year same date between the days divided into 8 parts
Q1.1 (YYYY) = 1st half of Quarter 1 for year YYYY
Q1.2 (YYYY) = 2nd half of Quarter1 for year YYYY
Q2.1 (YYYY) = 1st half of Quarter 2 for year YYYY
Q2.2 (YYYY) = 2nd half of Quarter 2 for year YYYY
Q3.1 (YYYY) = 1st half of Quarter 3 for year YYYY
Q3.2 (YYYY) = 2nd half of QuarterQ3 for year YYYY
Q4.1 (YYYY) = 1st half of Quarter 4 for year YYYY
Q4.2 (YYYY) = 2nd half of Quarter 4 for year YYYY
Here YYYY depicts the year.
e.g. Q1.2 (2014) depicts the 2nd half of Quarter 1 for year 2014.
The description of these values are explained below.
The table below provides the description about each value:
Quarter Quarter Range Start Date
Q1.1 1 Jan - 15 Feb 1st Jan
Q1.2 16 Feb-31 Mar 16th Feb
Q2.1 1 Apr- 15 May 1st Apr
Q2.2 16 May-30 June 16th May
Q3.1 1 Jul-15 Aug 1th Jul
Q3.2 16 Aug -30 Sep 16th Aug
Q4.1 1 Oct -15 Nov 1st Oct
Q4.2 16 Nov – 31 Dec 16th Nov
The dropdown values in time window needs to be updated as per date entered by the user in the Audit Plan start date and
should display the next four Quarter (each divided in 2 half i.e. Eight values ) along with the year from the selected Audit plan start date.
for eg. If the Plan start date is given as August 10 2013 then the Time window will display the following options:
Q3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q1.2 (2014)
Q2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
You can refer to the Table above and look that 10 Aug 2013 falls under the Q3.1 so Time window will display the next next 8 half Quarters ( Total 4 Quarter) till Q 3.1 for the year 2014.Hello,
WITH half_quarters AS(
SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1)) hq_start
,1 part
FROM dual
CONNECT BY ROWNUM <= 5
UNION ALL
SELECT ADD_MONTHS(TRUNC(DATE '2013-08-15','Q'), 3*(LEVEL - 1) + 1) + 15 hq_start
,2 part
FROM dual
CONNECT BY ROWNUM <= 5
,ordered_half_quarters AS(
SELECT hq_start
,part
,ROW_NUMBER() OVER (ORDER BY hq_start) r
FROM half_quarters
WHERE hq_start > DATE '2013-08-15'
SELECT 'Q '||TO_CHAR(hq_start,'Q')||'.'||part||' ('||TO_CHAR(hq_start,'YYYY')||')' q
FROM ordered_half_quarters
WHERE r <= 8
ORDER BY r;
Q
Q 3.2 (2013)
Q 4.1 (2013)
Q 4.2 (2013)
Q 1.1 (2014)
Q 1.2 (2014)
Q 2.1 (2014)
Q 2.2 (2014)
Q 3.1 (2014)
half_quarters generates the start dates of every half of a quarter, starting with the begin of the first quarter that contains the sample date.
The next step is to order the dates and to select only those after the sample date.
The last part formats the output and orders the data.
Regards
Marcus -
Error: please enter the date value in correct format DD-MON-RRRR
Hi all,
First of all I am 100 % learning oracle financial no technical background. I am trying to run a report: -the calendar does not appear in order for me to choose the date -Besides that when I enter the date ie 10-09-2010 or 10/09/2010 the system give me this error "Error: please enter the date value in correct format DD-MON-RRRR "
please help me solve that.
Thanksplease enter date in 12-Oct-2010 format.
regards,
http://www.oraerp.com -
How to Restrict user to enter the data in CAPS ONLY
Hi,
I have textinput in my page,i have to restrict the user to enter the data caps only.
can any one help me on this.
KarthikHi,
h1.
I have textinput in my page,i have to restrict the user to enter the data caps only.
-------u need to set the CSS class for this item
Regards
Meher Irk
Edited by: Meher Irk on Oct 24, 2010 11:16 AM -
In va02 tocde after entering the data only storage location field is not saving.why?
Hai
in va02 tcode after entering the data only storage location field is not saving. why?Hi Purnaiah,
Are you using any user exit for this or not?
Check for the below exit, this may be the place where you can implement your code for saving the value.
SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
Regards,
Rafi -
Unable to focus TextInput to Enter the Data
Hello,
I am Using Macromedia Flex 1.5 & Action Script 2.0 for my Application Using Jrun4 as a Server.
Now, My Problem is i am unable to focus and unable to get the cursor in TextInput to Enter the Data,
when i am using Loader Component inside another Loader Component.
For Eg
<mx:Loader id="courseSchedule_Loader" contentPath="loader.mxml.swf" showBusyCursor="true" />
Inside loader.mxml, i am using one more loader which has textinput as a component.
<mx:Loader id="TextInput_Loader1" contentPath="TextInputLoader.mxml.swf" showBusyCursor="true" />
Regards
RajasekharKept tabEnabled = "true", Yes its working now!
Thank You
Regards
Rajasekhar -
Error While Entering the Data: Code and Name
Hi Experts,
I have defined the Two User Defined tables and SBO created Two User Defined Forms.
i am able added the Data in One of the Form with the same value in Code columns for multiple rows and different value in Name columns for multiple rows.
but when i am trying to do the same thing second form, i am getting the following Error.
"This entry already exists in the following tables '' (@ABC) (ODBC -2035) [Message 131-183]"
Thanks in Advance
Regards
LokeshHi,
U cannot enter the same value again and again... they are unique fields..
Vasu Natari. -
What is the best way to mimic the data from production to other server?
Hi,
here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
Thanks a lot.....RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.
-
Hi urgent pls suggest when i press enter the data disappears...
hi
i have develop,ed a module pool for table maintianece
in which there are theree fields
customer number name email id
now when i dont press enter at first field ie customer number after entering all data
and save the data is saved properly for all three fields
but if after e ntering the customer number i press enter and then enter name and email id
and save the data for email is not saved and also if i just press enter again the data in email id column which i entered disappears
can anyone suggest reason and solution for it
regards
Arorahi
here is my code
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TABLE_ZCUST_EM_CREATE."AT T_ZCUST_EM_CREATE
MODULE STATUS_0200.
ENDLOOP.
*Process after input
PROCESS AFTER INPUT.
MODULE CANCEL_200 AT EXIT-COMMAND.
LOOP WITH CONTROL TABLE_ZCUST_EM_CREATE ."AT T_zcust_em_CREATE ." .".
MODULE USER_COMMAND_0200.
CHAIN.
FIELD t_ZCUST_EM_create-ship_to .
MODULE set_field_validation ON CHAIN-REQUEST.
ENDCHAIN.
MODULE USER_COMMAND_0200.
ENDLOOP.
here ship_to is customer number
ship_to_name is name
and email id is email id field
pls suggest on this code also if u want i can give code for the module validation and user commarnd 2000
as below
MODULE STATUS_0200 OUTPUT.
w_lines_200 = sy-loopc.
*Reading table t_zcust_em_create for screen 200.
read table t_zcust_em_create
index table_zcust_em_create-current_line.
*Refreshing The Internal table 't_zcust_em_temp'
refresh:t_zcust_em_temp.
ENDMODULE.
MODULE set_field_validation INPUT.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_zcust_em_create-ship_to
IMPORTING
OUTPUT = t_zcust_em_create-ship_to.
select single kunnr from kna1 into v_kunnr
where kunnr = t_zcust_em_create-ship_to.
if sy-subrc = 0.
select single name1 from kna1 into t_zcust_em_create-ship_to_name
where kunnr = t_zcust_em_create-ship_to.
else.
t_gui1-fcode = 'BACK'.
append t_gui1.
t_gui1-fcode = 'EXIT'.
append t_gui1.
t_gui1-fcode = 'SAVE'.
append t_gui1.
SET PF-STATUS 'AIMS_200' excluding t_gui1.
message E002 with t_zcust_em_create-ship_to.
endif. "kna1
ENDMODULE. " set_field_validation INPUT
MODULE USER_COMMAND_0200 INPUT.
*Setting it for select/deselect entries
move:t_zcust_em_create to t_zcust_em_create_sel.
append t_zcust_em_create_sel.
clear:t_zcust_em_create_sel.
*Getting internal table t_zcust_em_create with control
read table t_zcust_em_create
with key ship_to = t_zcust_em_create-ship_to.
*Getting internal table for create entries: screen-200
if sy-subrc ne 0 and t_zcust_em_create-ship_to ne space .
append t_zcust_em_create .
move:t_zcust_em_create to t_zcust_em_create_tmp.
append t_zcust_em_create_tmp .
clear:t_zcust_em_create_tmp ,
t_zcust_em_create .
endif.
clear:t_cols.
*Getting the value of w_fill_200.
describe table t_zcust_em_create lines w_fill_200.
ENDMODULE. " USER_COMMAND_0200 INPUT
PLEASE SUGGEST
REGARDS
ARORA
module read_table_value_0200. -
HT2513 when i enter the date march 30 in ical it changes to march 29
When I try to enter an event on March 30, iCal automatically enters March 29th. If I try to change the date in edit, the date reverts to the 29th.
How can I force iCal to use 30/3 as a date?Hi Sam,
You are posting a reply to a question that is almost two years old. We (and Numbers) have moved on since Sep 4, 2012.
If you want current advice on Date & Time formatting in the latest version of Numbers (Numbers 3.2) under OS X Mavericks, you can find it under the Function Browser.
Type = in a spare cell and choose Date and Time > Date to see this:
Regards,
Ian -
User exit for geting the Date of Production automaticaly
Dear Gurus,
We are using SAP 4.6C. We have activated expiration date check. When goods reciept of a batch happens, a pop up box asking date of production comes. Clients requirement is that this date has to be picked automatically and should be same as the posting date of goods issue made agaist the process order. Our process is that when we confirm the process order using transaction code CORK automatic goods reciept happens.
I want to know how should I proceed i.e which user exit I must used for the above requirement.
Waiting for your replys.
Thanks and Regards
Milind.Hi,
You can achieve this using the field exit. Your ABAP consultant can help you to achieve this.
Regards,
V. Suresh -
From where to read the data in Product specification for creating the condi
Hi,
I am trying to right the condition for a function to be excuted for certain line items. But i am not sure from where to read the data.. That is the data from the Input XML or the data from Get order XML.
If from Get Order XML then Do we need to traverse the complete path from Get order element or we need to start with the Order Line item element.
ThanksHi, this is described in the 7.2.2 documentation much better than before.
For this particular expression the input seems to be the order item with its properties, something like
<osm:orderItem
xmlns:osm="http://xmlns.oracle.com/communications/ordermanagement/model"
id="1288881040699">
<osm:properties
xmlns:im="http://oracle.communications.ordermanagement.unsupported. centralom">
<im:typeCode>PRODUCT</im:typeCode>
<im:parentLineId>3</im:parentLineId>
<im:requestedDeliveryDate>2013-06-31T12:00:00</im:requestedDeliveryDate>
<im:lineItemName>Commercial Fixed Service [Add]</im:lineItemName>
<im:lineId>4</im:lineId>
<im:ServiceActionCode>UPDATE</im:ServiceActionCode>
<im:productClass>Fixed Service Plan Class</im:productClass>
<im:serviceId>552131313131</im:serviceId>
<im:productSpec>Service.Fixed</im:productSpec>
<im:lineItemPayload> [34 lines]
<im:region>Sao Paulo</im:region>
<osm:properties>
</osm:orderItem>
(example from the concepts book)
where im here is your orchestration namespace.
Hope this helps.
Viktor -
How to raise popup when we enter the data on Partcular field
Hi All,
I have an issue in Sales Order in WEBUI, In the Sales Order when we enter the Customer Request Delivery Date field the popup sholu come,If any body have please do the need full for me.
Component: BT115H_SLSO
Regards,
Shanmukesh P[http://www.orafaq.com/forum/t/78289/2/|http://www.orafaq.com/forum/t/78289/2/]
Maybe you are looking for
-
ios 7.1 update battery drains thunder fast
-
Toolbar Button/Tab Spacing in Skin
Hi, all, Is there a method for decreasing the spacing between the buttons or tabs on a skin's toolbar? I'm trying to create a layout that makes the tabs appear to run together, but I can't seem to find a way to eliminate the spacing between them. I'v
-
European Portuguese (pt-pt) in Acrobat XI Pro
Where can I get information on whether Acrobat XI Pro supports European Portuguese (interface, spelling dictionaty, hyphenation, read out loud function)? Thanks.
-
A1000 Cannot lock screen rotation in landscape.
I am trying to lock the screen orientation on A1000L in the landscape mode. Under accessibility there is a setting to AUTO-rotate screen. Before unchecking the option I hold the tablet in the horizontal mode. As soon as i do, the screen flips to po
-
Maintenance mode flagged incorrectly as unplanned, should have been planned
Availability reporting showing incorrect Availability percentage because a significant outage flagged as unscheduled. How can I correct reporting? Data fix or ??