Enterprise manager & sql* plus login failed

hi
this is the problem i encountered yesterday:
there are server_3 and rs_16 machines which are in D1 domain and server_1 in W1 workgroup. server_3 and rs_16 has no oracle software whatsoever and on server_1 8i database exists. other machines with 8i clients, all in D1 domain, succesfully connect to server_1.
i installed 10g database on server_3 machine; after installation i created a database db1. after the database was created, i tried to start enterprise manager (EM) and it failed (the database is not mounted ....), and i found out that tns listener wasn't created during the installation. so i created tns listener and started EM again and browser showed the proper page (username and login). so i entered sys as username, pswrd (created during the installation) and connect as sysdba. when i clicked on login button, the page refreshed but nothing happened, the same page (login) was still opened. i tried to connect from rs_16 and the same thing happened. this happened using internet explorer for opening EM. i tried to login as system, sysman but all in vain.
then i installed 10g on rs_16, created db2 database and found out that tnsnames.ora file was missing. created db3 as well, and all went ok. started EM, tried to login and the same thing happened as on server_3, browser just refreshed the page.
also have to say that i tried to connect to databases using sql* plus and login also failed.
also tried using administration assistent for windows and tried to connect to db3. when i tried to connect as sys acount (database authentication) login failed, but when i used os authentication i succeeded.
then i tried to start EM from another machine rs_13 (D1 domain) using internet explorer and i succeeded, there was no problem at all. after all, i installed mozilla firefox (1.0.6) on rs_16 and succesfully started EM for any database i wanted. but have to mention that i still can't connect to any db using sql* plus.
rs_13 setup:
- win 2000 + sp4
- ie 6.0.2600.0000IC
and rs_16:
- win xp + sp2
- ie 6.0.2900.2180.xpsp_sp2
server_3:
- windows server 2003
on every machine i was logged in as top administrator so i had any possible permission.
could anybody answer these questions:
1. why tnsnames.ora wasn't created?
2. why tns listener wasn't created?
3. why couldn't i start EM using ie on server_3 and rs_16 and could on rs_13?
4. why did login fail using sql* plus and why can't i still connect to any db using sql* plus? is it a problem of assigning some privileges or something else?
5. why did login fail using database authentication while succeeded using windows authentication in administration assistent for windows? what should i do to make it succeed? is this all problem due to ie browser, win security or oracle security?
6. why microsoft is giving me a hard time with their security?
thanks for help in advance
hope this post will help someone else as well !!
Message was edited by:
uncle carmine
Message was edited by:
uncle carmine

could anybody answer these questions:
1. why tnsnames.ora wasn't created?
2. why tns listener wasn't created?I think you cancel Network Configuration Assistan which would create tnsnames.ora and listener. I hope others help you with the other questions I have plenty of work
Best Regards
Krystian Zieja / mob

Similar Messages

Oracle SQL Plus login fails

Hi
I have install Oracle 9i Enterprise Edition on Windows XP. Then I have created a database call "itcmdb". Then to login to SQL Plus in graphical mode I have enter
User Name: sys as sysdba
Password : password
Host String : itcmdb
Then I have got an error:
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Feb 17 16:46:17 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::= <username>[<password>][@<connect_string>] | /
so I try to log into SQL Plus by using command prompt. So i enter following command in the command prompt.
D:\>SQLPLUS /NOLOG
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Feb 17 16:50:34 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect sys/password@itcmdb as sysdba
Connected.
SQL>
the it was connected without any problem. Then i check "C:\oracle\ora92\network\admin\tnsnames.ora". So it was contain following information.
ITCMDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Rasika)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME=itcmdb)
Then i check "C:\oracle\ora92\network\admin\listener.ora". so it was contains following information.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = rasika)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ITCMDB)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = ITCMDB)
Cold u plz help me to fix this problem........

Hi
I have install Oracle 9i Enterprise Edition on
Windows XP. Then I have created a database call
"itcmdb". Then to login to SQL Plus in graphical mode
I have enter
User Name: sys as sysdba
Password : password
Host String : itcmdb
Then I have got an error:
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Feb
17 16:46:17 2006
Copyright (c) 1982, 2002, Oracle Corporation. All
rights reserved.
SP2-0306: Invalid option.
Usage: CONN[ECT] [logon] [AS {SYSDBA|SYSOPER}]
where <logon> ::=
<username>[<password>][@<connect_string>] | /
so I try to log into SQL Plus by using command
prompt. So i enter following command in the command
prompt.
D:\>SQLPLUS /NOLOG
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Feb
17 16:50:34 2006
Copyright (c) 1982, 2002, Oracle Corporation. All
rights reserved.
SQL> connect sys/password@itcmdb as sysdba
Connected.
SQL>
the it was connected without any problem. Then i
check "C:\oracle\ora92\network\admin\tnsnames.ora".
So it was contain following information.
ITCMDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Rasika)(PORT
)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME=itcmdb)
Then i check
"C:\oracle\ora92\network\admin\listener.ora". so it
was contains following information.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST =
)(HOST = rasika)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ITCMDB)
(ORACLE_HOME = C:\oracle\ora92)
(SID_NAME = ITCMDB)
Cold u plz help me to fix this problem........on the sqlplusw gui you can not pass sys as sysdba as this option is available in OEM or other FRONTEND tools, wherein they inherently implement connect command.
Hope this helps !

SCCM Console issue, SQL connectivity login failed for SCCM machine account

Hi ,
As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run.
Post the restoration on unable to launch the SCCM console, Error Could not connect to the site.
When I checked the logs in the log file SmsProv.log in the program filles\Microsoft Configuration manager\logs, the error is as below
*~*~e:\nts_sccm_release\sms\siteserver\sdk_provider\smsprov\sspobjectquery.cpp(6260) : SQL Connection attempt timed out~ SQL Error: [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
*~*~SQL Connection attempt timed out [28000][18456][Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'XXXX\ABBC$'.~*~*
<*><*> CANT CONNECT TO SQL, RETURNING ERROR <*><*>
Regards
Leela

Duplicate post.
https://social.technet.microsoft.com/Forums/en-US/6b26502b-ac07-426c-abe4-6cfdaa45b33b/sccm-console-launch-fails-sql-connectivity-issue-with-sccm-machine-account?forum=configmanagergeneral
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'

Hi,
We have exadata x3-2. I am seeing this error in alert log file frequently.
The db version: 11.2.0.3 On RAC on Linux 5.8 x86-64Bit
Errors in file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
The file /d01/oracle/TEST/11.2.0/admin/TEST1_dbtest/diag/rdbms/prod/TEST1/trace/TEST1_reco_11909.trc
Contains many repeated lines like below
*** 2015-01-21 06:34:40.209
ERROR, tran=21.24.51311, session#=1, ose=0:
ORA-01017: invalid username/password; logon denied
[Oracle][ODBC SQL Server Wire Protocol driver][SQL Server]Login failed for user 'RECOVER'. {28000,NativeErr = 18456}
ORA-02063: preceding 2 lines from HIS_CUST
Could any please help why is this happening.
Thanks

Hi,
You have customers who are running distributed transactions using a gateway which need to be rolled back. However, the gateway has not been correctly configured for distributed transactions. To roll back a transaction on the SQL*Server database a connection is made as the user defined in the parameter HS_FDS_RECOVERY_ACCOUNT in the gateway init<sid>.ora file but this user has not been created in the SQL*Server database with the password defined in HS_FDS_RECOVERY_PWD. This user also needs to own the transaction log table.
I assume you are using the Database Gateway for SQL*Server (DG4MSQL) as the Database Gateway for ODBC (DG4ODBC) doesn't support distributed transaction.
If you have access to My Oracle Support have a look at this note -
How to Setup DG4MSQL to Use Distributed Transactions (Doc ID 227011.1)
Otherwise, check the Gateway documentation.
Regards,
Mike

ERROR – SQL Server Login Failed, Error 11001

We have an application that uses MSDE as its ‘Back-end’.
It has been working fine for years. We have however had to recently re-build the Operating System on our own Server that it was running on.
Original O/S Environment
We used Windows Server 2008 r2, using
Hyper-V to run Windows Server 2003 so that we can use
MSDE to run our application.
We do not want to change to later versions of SQL Server Express as they no-longer support Replication.
NEW O/S Environment
When we re-built the Server we went for Windows Server 2008 r2, using
Hyper-V to run Windows 7 Enterprise so that we can use
MSDE to run our application.
We have used this setup many times before and know that MSDE runs quite happily under Windows 7.
Servers have been renamed
The real Windows Server 2008 r2 machine used to be called FILESERVER.
It is now called FILE-SERVER.
The virtual machine running our application was originally called GEMSERVER.
It is now called GEM-SERVER.
What’s happening on the Server
The application is running fine. We can access the underlying MDSE Database with SQL Server 2005 Management Studio Express without problem.
We can build a test ODBC Data Source and connect to the ‘SQL Server’ Database, again without problems.
What’s happening on the Client PC
The application does not connect. I get:
     An error occurred while connecting.
     [DBNETLIB]ConnectionOpen (Connect())SQL Server does not exist
     or access denied.
When I build a ODBC Data Source to test the Connection I get:
Microsoft SQL Server Login
Connection failed:
     SQLState: '01000'
     SQL Server Error: 11001
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
     (Connect()).
     Connection failed:
     SQLState: '08001'
     SQL Server Error: 6
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL
     server not found
I can Ping GEM-SERVER from the Client PC without problems.
I have disabled Firewalls an Anti-Virus Software on both the GEM-SERVER and the Client PC – to no avail.
I’ve tried connecting with:
Named Pipes,
TCP/IP,
IP Address of GEM-SERVER – 192.168.16.122,
Using Specific Port 1433 in connection.
NONE of it worked. L
ANYBODY any ideas what to try next?

Here's the solution that we came up with to our own problem:
This problem was actually caused by a bug in our own Application.
For some reason when we restored our MDSE Database the correct SQL Server Access Protocols were not setup correctly. (It is designed to handle these setup issues for us and has done so previously.)
We still have to determine why it happened and rectify the problem within our Software.
However to correct the problem with our own 'Server' we had to manually:
Run netsvrcn.exe using command prompt as an Administrator on the ‘Server’ running the MSDE Database,
Enable TCP and NAMED PIPES protocol
Restart SQL Server instance
Exclude the ports SQL Server normally listens on, from the firewall using ‘Windows Firewall Advanced Security’ for both in-bound and out-bound rules:
1433 TCP port
1434 UDP port
We then tested the ODBC connection from client machine and found that it worked fine, as indeed did our application.
However we still have a residual problem.
For we cannot connect to our Server called GEM-SERVER using GEM-SERVER\GEMSQLSRVR we have had to use 192.168.16.122\GEMSQLSRVR.
We are not sure why. We obviously wish to use the machine’s name rather than its IP Address, as its IP Address is dynamically assigned by a DHCP server so may change in future.
Do I need to raise this remaining problem as a separate issue?

Oracle10g Developer Suite - Application Development - SQL Plus Login Info

I have installed Oracle10g Developer Suite and when I am trying to login into the sql*plus environment the username scott with the passcode tiger is not working. I have Oracle9i Enterprise Edition Release 9.2.0.1.0 as the database.
Can anyone help me in setting up the username and password to login into Sql*plus Release 10.1.0.4.2

It sounds like you may be new to Oracle and its products. I would recommend doing some reading.
Oracle 9.2 Net Services Admin Guide
http://download-west.oracle.com/docs/cd/B10501_01/network.920/a96580/toc.htm
Oracle Developer Suite Installation Guide
http://download-west.oracle.com/docs/cd/B25016_06/doc/dl/core/B16012_03/toc.htm
You create the "login" information when you install the database. If you are not the person who performed the installation, you will need to contact them or install it again. Also, be aware that the SCOTT schema is disabled by default in newer database versions for security reasons.
The tnsnames.ora and sqlnet.ora files can be found in the ORACLE_HOME\network\admin directory. This is the same for all Oracle products that use Sql-Net for database connections. You can also use the TNS_ADMIN environment variable to point to a pre-existing tnsnames.ora file (see previously mentioned documents).
The tnsnames.ora entry will be unique to your database and its listener however here is an example:
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = someServer.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)

SQL Plus login

Installed Oracle 9i enterprise edition from disk set provided with course text on advanced database concepts.
Received registration key from oracle but no user name or password to open a session on SQL Plus. Cannot logon.
Does anyone have info on who to contact?

I followed your suggestion and pulled up the configuration assistant. I managed to create a password without being sure of anything I was doing and voile!
I was able to log on to SQL PLUS.
Thanks for the tip!

Database up but cannot access Enterprise Manager or APEX Login

Newbie here so sorry if this is straightforward.
I've already searched the forums and have tried to do what is recommended and still have an issue.
I'm running 10.2 Enterprise on a windows XP virtual machine. It has been working ok for some time.
I rebooted the VM without shutting down the DB. When it rebooted the database is up and I can run queries using SQLplus. However I can't load any services through a web page eg. Enterprise Manager, APEX login.. I also can't make a connection using SQL Developer. These were all working fine before.
I've searched these forums already and some people have had similar issues when running 10.2 on a virtual machine and it was the listener that was an issue...
I deleted and reinstalled the listener using Net Configuration Assitant and restarted the DB but that didn't help.
Below are the results when i use tnsping. Any advice would be really appreciated! Thanks!
C:\Documents and Settings\XPMUser>tnsping orcl
TNS Ping Utility for 32-bit Windows: Version 10.2.0.3.0 - Production on 18-APR-2
010 01:07:18
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos
t)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
OK (20 msec)

This was done AFTER i already have access to APEX....
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\XPMUser>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\XPMUser>emctl start dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\XPMUser>set ORACLE_SID=ORCL
C:\Documents and Settings\XPMUser>emctl start dbconsole
OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole
VirtualXP-54269ORCL not found.

Install Enterprise Manager Grid Control 11R1 Failed at OMS Configuration

Hello:
I have installed Oracle 11g (11.2.0.1) and WebLogic Server (WLS) 10.3.6.0 and currently I am in the process of installing Enterprise Manager Grid Control 11R1 on a Linux RedHat 5.8 and it fails at OMS Configuration.
I have read the following thread and they suggested to use WLS 10.3.2:
Trouble installing EM GC -- installer patch 9329357 fails
I was looking for WLS 10.3.2 in Oracle's website and I could not find it.
Any help would be greatly appreciated.
Here is the log regarding the error:
The patch has more than one Archive Action but there is no Make Action.
ApplySession applying interim patch '9367763' to OH '/dbs0/product/fmw/oms11g'
Running prerequisite checks...
You selected -local option, hence OPatch will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/dbs0/product/fmw/oms11g')
Is the local system ready for patching? y
Y (auto-answered by -silent)
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '9367763' for restore. This might take a while...
Backing up files affected by the patch '9367763' for rollback. This might take a while...
Patching component oracle.ldap.rsf, 11.1.1.2.0...
Updating archive file "/dbs0/product/fmw/oms11g/lib/libldapclnt11.a" with "lib/libldapclnt11.a/gslu.o"
ApplySession adding interim patch '9367763' to inventory
Verifying the update...
Inventory check OK: Patch ID 9367763 is registered in Oracle Home inventory with proper meta-data.
Files check OK: Files from Patch ID 9367763 are present in Oracle Home.
Execution of 'sh /dbs0/product/fmw/oms11g/install/oneoffs/111010/9367763/custom/scripts/post -apply 9367763 ':
Return Code = 0
The local system has been patched and can be restarted.
OPatch succeeded.
This config tool has failed. Please re-run this config tool manually from another terminal as
<ORACLE_HOME>/perl/bin/perl <ORACLE_HOME>/install/oneoffs/apply_NewOneoffs.pl <ORACLE_HOME> <oneoff_numbers>
Eg: /scratch/EM/agent10g/perl/bin/perl /scratch/EM/agent10g/install/oneoffs/apply_NewOneoffs.pl /scratch/EM/agent10g 5632264,5961654
Finished one-offs apply...
Deleting the files...
Finished deleting the above files...
Configuration assistant "OMS Oneoff Patch Application" Succeeded
Running Configuration assistant "Repository Configuration"
Calling the EMSCHEMA MANAGER: CREATE
Please check the Repository Configuration Assistant logs at: /dbs0/product/fmw/oms11g/sysman/log/schemamanager
The create is completed now running the MOS
Configuration assistant "Repository Configuration" Succeeded
Running Configuration assistant "MDS Schema Configuration"
Configuration assistant "MDS Schema Configuration" Succeeded
Running Configuration assistant "OCM EM Repository Instrumentation"
Configuration assistant "OCM EM Repository Instrumentation" Succeeded
Running Configuration assistant "OMS Configuration"
Executing the OMSCA command...
Check the OMS Configuration Assistant logs at: /dbs0/product/fmw/oms11g/cfgtoollogs/omsca
INFO: Required tool's Execution failed
Configuration assistant "OMS Configuration" Failed
INFO: ***Configuration Assistants Action END ***
*** The installation was Successful, but some configuration assistants were failed or cancelled or skipped. ***

Hello:
For some reason after selecting the Retry button it successfully passed the Add-on OMS Side Configuration. Now I am failing at the "Agent Configuration Assistant". Here's the agent log:
log4j:ERROR No appenders could be found for category (oracle.sysman.emas.sdk.discovery.discover.WeblogicTargetDiscovery).
log4j:ERROR Please initialize the log4j system properly.
Total Discovery time is :1675milliseconds.
INFO: oracle.sysman.top.agent:AddingToTargetsXml: WLS targets
INFO: oracle.sysman.top.agent:Adding /oracle/product/agent11g/sysman/install//oraclewls.out file to /oracle/product/agent11g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file= /oracle/product/agent11g/sysman/install//oraclewls.out to /oracle/product/agent11g successfully.
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Starting Agent with startAgent=true
INFO: oracle.sysman.top.agent:Starting the agent
INFO: oracle.sysman.top.agent:Starting the agent...
INFO: oracle.sysman.top.agent:Executing Command: /oracle/product/agent11g/bin/emctl start agent
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager 11g Release 1 Grid Control 11.1.0.1.0
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2010 Oracle Corporation. Allrights reserved.
INFO: oracle.sysman.top.agent:Agent is already running
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.agent:11.1.0.1.0:common:family=CFM:oh=/oracle/product/agent11g:label=10} failed with an unhandled exception:
java.lang.Exception:
The Management Agent Configuration Assistant has failed. The following failureswere recorded:
Securing of the agent failed.
at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:269)
at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:243)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:540)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:120)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
Any help would be greatly appreciated.
Thanks,
Orivares

Oracle Enterprise Manager 11g - 'unexpected login error'

Hi,
I am having trouble logging into Oracle Enterprise Manager - Fusion Middleware Control. at the login screen when i enter in the UN and PWD, I get the msg: 'unexpected login error'. I was able to login before, this just happend and now I cannot login. Any help would be appreciated.
Thanks.

You may have greater chances to get an answer....there:
Enterprise Manager
Greetings...
Sim

WCF-SQL Adapter Login fail 'NT AUTHORITY\ANONYMOUS LOGON

Hi,
I am have three WCF-SQL receive with WCF-SQL Adapater and two are working fine but the third one is giving the following warning in the Eventlog. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I really appreciate your help.
thanks
Ram
---------------Warning written to EventLog ---------------
The adapter "WCF-SQL" raised an error message. Details "Microsoft.ServiceModel.Channels.Common.AdapterException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.. Endpoint Address - mssql://txhubdb//switch_mailbox_RX2?
---> System.Data.SqlClient.SqlException: Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteXmlReader()
at Microsoft.Adapters.Sql.ExecutionHelper.ExecuteXmlReader(SqlCommand sqlCommand, Double totalSeconds)
at Microsoft.Adapters.Sql.SqlAdapterInboundHandler.Polling_TryReceive(TimeoutHelper timeoutHelper, Message& wcfMessage)
at Microsoft.Adapters.Sql.SqlAdapterInboundHandler.TryReceive(TimeSpan timeout, Message& message, IInboundReply& reply)
--- End of inner exception stack trace ---
at Microsoft.ServiceModel.Channels.Common.Channels.AdapterInputChannel.EndTryReceive(IAsyncResult result, Message& message)
at System.ServiceModel.Dispatcher.InputChannelBinder.EndTryReceive(IAsyncResult result, RequestContext& requestContext)
at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext& requestContext)".

1) Do you have the same Credentials settings for all 3 Receive Locations (Found under Configure | Other | Credentials on you WCF-SQL Adapter)
2) Are all 3 Receive Locations Locations polling from the same SQL Server? If not are they then on the same domain? If the server that is failing is not on the same domain as your BizTalk Host User, then you might need to supply credentials and use a local
SQL User.
Morten la Cour

Unable to get SQL Plus login id & pw

Hi all, I am a beginner in using Oracle products.
Q1)
I am using windows vista and I have installed Oracle 10g on my machine, and when I tried to access SQL Plus, they prompted me for :
ID
Password
Host String
I do not know how to get/create those values. May I ask how to?
Q2)
How do I uninstall Oracle 10g from Windows Vista? I couldn't uninstall from the control panel.
Thanks!

On that page you had the choice of...
1. Oracle Database 10g Release 2 (10.2.0.3)
Enterprise/Standard Edition for Microsoft Windows Vista
2. Oracle Database 10g Companion CD Release 2 (10.2.0.3)
10203_companion_vista.zip (677,074,714 bytes)
Download latest Oracle Application Express (formerly HTML DB)
3. Oracle Database 10g Client Release 2 (10.2.0.3)
10203_client_vista.zip (616,067,114 bytes)
If you select the first one then that looks like the full database, so you have installed a database locally on your PC.
When you choose the starter database there should have been an option to set the default password for all the default users with an option (usually missed) to set different passwords for each of the default users.
It's difficult to recall the details without actually going through an install which isn't something I do every day.
Best bet is in the installation forum.
;)

SQL Plus Login issue

Please assist...when i am trying to login following error is occuring ....
Enter user-name: / as sysdba
ERROR:
ORA-01031: Message 1031 not found; No message file for product=RDBMS,
facility=ORA

Maran thanks for the prompts replies, i have already set the variables & restarted the machine but there is no change. please see below;
C:\Documents and Settings\Administrator>sqlplus
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
C:\Documents and Settings\Administrator>d:
D:\>cd oracle
D:\oracle>cd ora92
D:\oracle\ora92>cd bin
D:\oracle\ora92\bin>sqlplus
SQL*Plus: Release 9.2.0.6.0 - Production on Fri May 11 17:31:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: / as sysdba
ERROR:
ORA-01031: Message 1031 not found; No message file for product=RDBMS,
facility=ORA

Enterprise Manager - sql tuning advisor , Access advisor for SQL Tuning

Hi,
NO I mean in oracle 10g you have the enterprise manager which can be used to tune sql statements using the SQL ADvisor and SQL access advisor.
I believe in oracle 10g the process of SQL Tuning is slightly easier using the Enterprise Manager ...so if some one could explain me that process...
Again thanking you in advance
regds
Manoj Gokhale

Hi Manoj,
tune sql statements using the SQL ADvisor and SQL access advisor.Do you have the OEM extra cost "performance pack"?
The OEM screens are fairly self-explainatory, but here are some references on the 10 SQL tuning advisors:
http://www.oracle-base.com/articles/10g/AutomaticSQLTuning10g.php
http://www.remote-dba.net/oracle_10g_tuning/t_oracle_sql_tuning_advisor_session_example.htm

Block Sql Plus Login

Hi,
I have database 8.05. For client server application on the client side we mention
D:\ORACLE\BIN\F50RUN32.EXE c:\test\test.fmx test/test@test
Now anyone can logon to sql plus and if he knows sql plus as the username and password is there. I dont want to remove sql plus from each machine and at the same time i dont want to user to logon to sql prompt.
Operation system is windows NT.
Rgds

What you need to do is , give only CONNECT permissions to user TEST. So even if the user logs in SQLPLUS he wont be able to access any OBJECTS.
ALSO you need to create another Oracle user , which will have all the necessary permissions.
In your client application (FORMS), you need to connect using this new user after you have initially logged in using TEST user
Hope this helps
Ashwin N.

Enterprise manager & sql* plus login failed

Similar Messages

Maybe you are looking for