Entreprise Portal : how to move database

hello,
actually my database is located on server1 and entreprise portal on server2
i just want to move the database from server1 to server2
i've restored the database on server2 and changer default.pfl and secu store but i still have a problem with logins not existing in the restored database.
anyone knows how to solve my problem?
best regards

When you move database from one server to another, the users associated by database are not recognized by server 2, these are called as orphan logins.
Please follow this post, for how to fix them.
http://www.mssqltips.com/tip.asp?tip=1590
Thanks

Similar Messages

How to move database objects from one user to another user

Could someone help how to move database objects from one user to another user
Thanks in advance

Thanks a lot for the reply.
Actually I wanted to know whether there is any command to change the owner ship of the table.
For ex table1 belongs to user1. can the owner of table1 to be changed to owner2.
directly using an oracle command. I knew that it can be done using import and export, since the table was 200 million thought the rename command would be faster instead of import and export.
Thanks Billy for letting me know that it is not possible using oracle query.

How to 'move' databases from one server to another

Hi there
Here is a brief description of my assignment.
We have two Redhat Linux 4 64-bit server where two Oracle 10.2.0.4 64-bit database are running (one on each server).
<li>DB on server1 is using Filesystem for storage.
<li>DB on 2nd server is using ASM.
<li>Size of both is between 75-80GB.
<li>I have to move both the databases to new servers (same platform) with minimum downtime.
<li>There is no upgrade required during this move/migration. Both DBs have to be brought over as-is.
<li>The new servers may be on VMWare - I am not sure it at the moment. But please let me know if that will make any difference.
I would highly appreciate if someone could please provide me with some high-level guidelines to perform this move.
Best regards

Hi Srini
Thank you so much for sharing the valuable URLs.
I am reading through "Cloning An Existing Oracle10g Release 2 (10.2.0.x) RDBMS Installation Using OUI [ID 559304.1]" and I have few questions.
<li> This MOS says:
NOTE: This note should only be used for cloning single-instance (non-RAC) homes. It should not be used for cloning RAC, CRS or ASM homes.If that is the case, how should I clone ASM-Home?
One of the environments that I have to migrate to a new server has ASM installed as well. And couple of oracle databases (10.2.0.5) on that server are using ASM for storage.
<li>If were to do a fresh installation of 10gR2 RDBMS and ASM homes (on Redhat Linux 64-bit), I guess I need to contact Oracle Support (open an SR) to access the software, right?
<li>How to check from existing installation which patches I need to download and apply to this fresh installation in order to make it same as the existing installation? "opatch lsinventory" gives me a long list of number/fixes - I don't know which patch(es) to download.
Please advise!
Best regards
Edited by: user130038 on May 22, 2013 3:48 AM
Edited by: user130038 on May 22, 2013 3:55 AM

How to move SQL database from one location to another location i.e. from C' drive to D' drive

Hi, How to move SQL database from one location to another location i.e. from C' drive to D' drive ? please share some link.
Thanks and Regards, Rangnath Mali

Hi Rangnath,
According to your description, my understanding is that you want to move databased from C drive to D drive.
You can detach Database so that the files become independent, cut and paste the files from source to destination and attach again.
There are two similar posts for your reference:
http://mssqltalks.wordpress.com/2013/02/28/how-to-move-database-files-from-one-drive-to-another-or-from-one-location-to-another-in-sql-server/
http://stackoverflow.com/questions/6584938/move-sql-server-2008-database-files-to-a-new-folder-location
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Mount Unmount in oracle database,move database

Hello All,
I m new in oracle database.i want to know how to move database from one system(x) to another system (y).Because my oracle server corrupted on which i created the database on system (x),now i want to use this database on another system (y),and i have no backup of the database on system(x).So,How to attach that datbase on system(y),so i can view my table on system(y),I know my datbase on system(x) is right ,but only connection from oracle server broken,because system improper shutdown.
Please help me.
Thanks in advance......

As Jim said to you before, this forum is for the SQL Developer tool. Please post this under Database - Installation (or General ), where you'll undoubtly get more response.
Regards,
K.

How to move only subset of data from one database to another?

Both source & destination are Oracle11g databases.
The requirement details are as below,
1) The database contains static as well as transactional data for telecom domain.
2) We have to move region-wise data from one database to another.
3) There are around 10 regions.
4) The region wise data extraction from source db is based on around 40 to 50 tables. Rest of the tables contains
static data & it will not change.
5) The volume is around 1 million subscribers per region.
6) The migration is required because
a) The client is upgrading its base product which uses this database
b) There is a change in structure of static tables
c) Hardware upgrade
d) The client want to start with single region on new database & rest of the regions will be operated from old
database.
7) Keep execution time to very minimum.
I am thinking to have solution as below,
1) Create destination database with upgraded db structure (as mentioned in 6b)
2) Create database links to access source db in destination db.
3) Write SQL queries to fetch data from all the respective tables for a specific region
4) Write separate PL/SQL blocks for each table to fetch data from source db & insert into respective table in
destination db
a) Use FOR ALL & bulk collect to improve the performance
b) Divide table data into multiple chunks & execute parallel batches (around 10) to insert the data
5) Validate pre & post counts to verify the success of migration
Is there any other better way?
Regards,
Sandeep

How to move only subset of data from a partiular table by using transportable tablespace?
E.g. SUB table using SMP_SUB tablespace contains subscriber data in source database.
The indexes defined on SUB table are under SMP_IDX_SUB tablespace
The subscribers data can be categorized by different regions, say region_id column. Then how to move data & indexes of SUB table from source db to destination db?
any specific example would be helpful.

How to move worksheet saved on database from one instance to another?

Hi Every one,
How to move worksheet or workbook saved on database from Discoverer plus from one instance to other instance?
Is there any way to save a workbook or work sheet on to local drive from discoverer plus.?
Thanks
santhosh

Hi,
You have 2 options: use Discoverer Administrator to export/import the workbook; or use Discoverer Desktop to save the workbook to the local drive.
You cannot save a workbook to the local drive using Discoverer Plus.
Rod West

Move Database From one location to another in same Server

Hi,
I am using 11 g R2 in OEL 5.
I have installed my database inside oracle base /TEST_DB. Here i have oracle home and datafiles directories etc as usual.
But i need to move this to /UAT/TEST_DB and run the oracle home and database form there.
Is this cloning procedure is enough :- *Cloning An Existing Oracle11g Release 2 (11.2.0.x) RDBMS Installation Using OUI [ID 1221705.1]*
or this is only for Oracle_Home??? If so please tell me how to move both the database and the oracle home.
Regards,
Susmit
Edited by: Susmit on Dec 20, 2011 2:47 PM
Edited by: Susmit on Dec 20, 2011 2:47 PM

Susmit wrote:
Hi,
I am using 11 g R2 in OEL 5.
I have installed my database inside oracle base /TEST_DB. Here i have oracle home and datafiles directories etc as usual.
But i need to move this to /UAT/TEST_DB and run the oracle home and database form there.
Is this cloning procedure is enough :- *Cloning An Existing Oracle11g Release 2 (11.2.0.x) RDBMS Installation Using OUI [ID 1221705.1]*
or this is only for Oracle_Home??? If so please tell me how to move both the database and the oracle home.
Hi,
I did this just a week ago, or so. You don't need to clone the instance.
There's a pretty good description on how to do this here:
http://www.oracle-base.com/articles/misc/RenamingOrMovingOracleFiles.php
However, after doing the steps outlined here, you're still having the same ORACLE_HOME and ORACLE_BASE. Do the following:
SQL> alter system create pfile from spfile;and manually change the relevant parameters in the newly created pfile to reflect the changes you're about to do (dump_dest etc..)
Shut down the instance, move all files in your ORACLE_HOME to the new location, and change all relevant environment variables.
connect to your idle instance in the new ORACLE_HOME, and do
SQL> startup pfile=/path/to/your/pfileand after the instance has started correctly, do
SQL> create spfile from pfile;All done!
HtH
Johan

MS Project 2010 Server - How to move a single MS Project plan and SharePoint Project site from a PWA server to another PWA server (one at a time)

MS Project 2010 Server
How to move a single MS Project plan and it's SharePoint project site from a PWA server to another PWA server (one at a time)
I have 2 Project PWA servers, i know how to copy all the databases (Publishing, Draft, Reporting, archive, content) from one SQL server and copy it to the other PWA server so both server can be identical.
I need to only move a single project from a PWA server to another,
Moving the Project plan, actual time data, SharePoint site with all it's content
Is there a 3rd party tool that can be added on to the server to help me move single project plans? to different PWA servers?
-Isaack

Visit my friends at FluentPro and try FluentBooks
http://www.fluentpro.com/productsfluentbooks2013.html
they have a 2010 version also.
Hope that helps,
Thanks, Eric S. Pcubed

How to move Tablespace from One disk group to another disk group in RAC

Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...

user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K.

How to move all of itunes onto external hard drive?

Right now, I have my music library connected to iTunes on an external hard drive. iTunes is installed on my desktop computer. What I'd like to do is have iTunes wholly on my external hard drive so I could move it back and forth between a laptop and my desktop. I edit a lot of tracks and to make sure the edits carry over, I'd just like it all on the external hard drive instead of downloading iTunes onto both devices. Also I add and delete different playlists with regularity.
Plus my iTunes runs sluggish (freezes for several seconds every time I click on something) and after a google search, one reason might be because my massive music collection is on a different drive, so I'm curious if keeping it all on the external would help.
I've searched around on how to do this, but all I find is how to move my library onto the external (its already there). I'm using Windows 7.

See Make a split library portable.
The larger the library and the more playlists you have the longer it takes to process each change in the database.
tt2

How to move E-Business from HP-UX to AIX

Do you have any reference on how to move E-Business suite to different operating systems or more specifically from HP-UX to AIX? Thx.

We have done the platform move and upgrade at the same time :
From: To:
RHEL 2.1 -> AIX 5.3
DB 9.2 -> DB 10.2
eBS 11.5.9 -> eBS 11.5.10.CU2
High level steps where :
1. take a copy of the 9i database to a staging area (using data guard etc)
2. upgrade database to 10g to get datapump capabilities (we had to upgrade to 10.1 since 10.2 was not certified on RHEL 2.1)
3. datapump export all metadata and data
4. create fresh eBS install on target platform, then delete all database objects
5. Create new database,
6. datapump import (from step 3) and recreate indexes
7. upgrade database to 10gR2
8. upgrade apps to 11.5.10CU2
9. re-install upgraded CEMLI components
10. validate and reconcile data
We are preparing presentation for AUOUG that will describe this in more details, we are happy to share this as soon as it is ready.
If you are not doing and upgrade (of DB and eBS) at the same time as migration your process can be simplified.
Usage of the 10g datapump export / import was essentiall part of our strategy.
We have decided not to use Transportable tablespacess as there is no documented way how to do this with 11i DB, (System tablespace is not transportable which causes number of problems with AQ, etc ).
If you are moving to another platform that has the same endian format (AIX and HPUX are both big endian), and you are on DB 10.2 (or ready to upgrade to 10.2) you can use Transportable Database
Transportable Database is a new feature in Oracle Database 10g Release 2 (10.2) that is the recommended method for migrating an entire database to another platform that has the same endian format. The principal restriction on cross-platform transportable database is that the source and destination platform must share the same endian format. For example, while you can transport a database from Microsoft Windows to Linux for x86 (both little-endian), or from HP-UX to AIX (both big-endian), you cannot transport a whole database from HP_UX to Linux for x86 using this feature.
More info on http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/dbxptrn002.htm#sthref1397
For the 11i middle tier, safest and easiest way is to re-install it from CD, and then add you custom CEMLI bits.
Regards,
Radomir

How to move FLASH_RECOVERY_ARE file to new drive?

Thanks for taking my questions!
Does anyone know how to move the e:\oracle\flash_recovery_area\* files to a new drive?
Thanks,
Kathie
THIS FAILED:
I created a new pfile.
Edited pfile changing old drive letter to new drive letter.
shutdown immediate
moved the E:oracle\flash_recovery_area\* to S:\oracle\flash_recovery_area\*
startup nomount;
create spfile from pfile;
shutdown immediate;
startup
Now I get ORA=38760 - This database instance failed to turn on flashback database;

Kathie,
Try this by mounting the database first
1) First Turn off Flashback:
SQL> alter database flashback off;
Monitor alert log for messages regadring flashback:
Then s turn the flashback on again.
SQL> alter database flashback on;
SQL> Alter database open;Regards

How to move mouse cursor

Hello
does anybody know how to move the mosecursor with lab view code. If anybody
have some vi's that take care of this I would be most grateful
Regards
Stian Langeland

For the Win32 case, there's an example available that does this very thing:
http://digital.ni.com/explprog.nsf/websearch/c33e65e20b23f3e4862565ec004d67ec
I searched the National Instruments Example Programs Database
(http://www.ni.com/support/epd/) for "mouse" in order to turn this up.
Regards,
John Lum
National Instruments
> > Hello
> > does anybody know how to move the mosecursor with lab view code. If anybody
> > have some vi's that take care of this I would be most grateful
> >
> > Regards
> > Stian Langeland
>
> I think there is no "native" labview solution to your problem.
> It depends on the platform you are working on. If you use Win32 i'd suggest (if
> you really need to move the mouse cursor programmatically... do you?) to call
> some Win32 api func
tion like MOUSE_EVENT or SEND_INPUT on WinNT. Look them up
> in M$ documentation. To call them use from the Functions Palette -> Advanced
> -> Call Library Function.
> Hope this helps.
> --
> Wolf-Dieter Wall

How to move to next record of the databank file using custom code

hi,
can someone please tell me how to move to next or the previous record the Databank file. i found a funtion setcurrentdatabankrecord(), but i am not able to use it.
thanks in advance...

Hi,
I recently had the same problem, here's my solution:
"setCurrentDataBankRecord" is available only to External Program Control.
I used the VB of an empty Word2002 Document.
1. you have to reference the webAnlyst.exe in the object-catalogue
2. create a module via the menue
3. type in the code
This is the code I used - some of the code is just for control
Private Sub TestSetDBRec()
Dim pdtest As webanlst.ProgT
Set pdtest = New webanlst.ProgT
Dim currDBI, numRecsCurrDB As String
' Workspace öffnen
pdtest.play.OpenWorkspace "VBTest"
' Script öffnen
pdtest.play.openScript "BM2B_VK_Änderung"
' DB-Abfragen
numRecsCurrDB = CStr(pdtest.play.getDataBankSize)
currDBI = pdtest.play.currentDatabankIndex
pdtest.play.setCurrentDataBankRecord (2)
currDBI = pdtest.play.currentDatabankIndex
' jetzt das Script abspielen
pdtest.play.doScript "BM2B_VK_Änderung"
End Sub
This works! You can also looping through the database by getting the current value and set the value back increased by e.g. one
Hope it is helpful!

Entreprise Portal : how to move database

Similar Messages

Maybe you are looking for