Entry Poinit for PCD

Hello Experts,
I am trying to provide an entry point for the PCD folder to the Web Content under KM Content. I have done the necessary configuirations like deactivating the option "Hide in the Root folder" and mentioned my PCD folder path under PCD Root Identifier. Still I'm not able to see that folder in KM Content.
Do I have to do anything like create entry point? Please suggest.
BR,
Raghava.

Hi,
Have you followed these steps?
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/en/06/4776399abf4b73945acb8fb4f41473/content.htm
To see the pcd folder in the KM:
c.      Deactivate the Hide in Root Folder checkbox.
d.      Restart the servlet engine.
3.      Create an entry point for the folder that you created in step 1d (for example, /wpccontent/iViews).
To configure it as an entry point:
SAP Help: http://help.sap.com/saphelp_nw70/helpdata/en/45/e58347f5546976e10000000a1553f6/content.htm
Edit the wpcDragExplorerEntryPoints configuration object.
displaymode=select,maxproviderprio=30,entriesperrow=5,sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder
br,
Tobias

Similar Messages

How to create Entry Point to pcd repository?

Hi,
I am unable to see the iviews to drag and drop on the web page in Web page composer.
I tried to create static entry point to PCD repository.
But I can't the PCD folders.
How do I configure this?
Thanks
Thruna Shanmuga

Hi Vishal,
Thanks for your replies.
I am able to see the my folder
in Content Administration -> KM Content ->
pcd>portal content>Test
In the property i set the following value.
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,
sharedcontent=/wpccontent/Cross-Site Content;/documents/MyFolder;/pcd/Test
When I tried to create entry point in Web Page Composer, I click the browse to find the Test folder.
I can't see the Test folder.
How do I create entry point for the Test folder?
Thanks
Thruna Shanmuga
Thanks
Thruna Shanmuga
Edited by: Thruna Shanmuga on Apr 6, 2009 10:34 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM
Edited by: Thruna Shanmuga on Apr 6, 2009 10:42 PM

Doubt in configuring entry points for iviews

Hi, I have followed the steps of the help about configuring entry points for iviews:
1.-> in the pcd I have created a folder to store iviews for WPC.
2.->I have gived read permission.
3.->I have desactivated the hide root folder check por pcd repository.
4.->I have created a folder in km.
I am loosing in the step "Create a entry point for the folder that you created in step x".
How link the pcd folder that store the iviews with the km folder?
when I try to create a entry point I only can see km folders, How can I choose my pcd folder?
Thanks.
Regards.

Try this:
Procedure
1. Choose System Administration → System Configuration → Knowledge Management → Content Management → User Interface → Mapping → Component.
2. Edit the wpcDragExplorerEntryPoints configuration object.
Use the following parameters:
Parameter: Description
displaymode:Specify select
maxproviderprio: Highest priority number that standard entry points can have and still be displayed in the Web content browser
entriesperrow: Number of entry points displayed in each row (default: 5)
entrypointsprefix: Prefix of the entry point repository: If you specify a value for this parameter, standard KM entry points are also displayed in the Web content browser.
Default: /entrypoints
sharedcontent: Semicolon-separated list of paths to be displayed as global entry points for shared content
Examples of parameter values (for sharedcontent param):
displaymode=select,maxproviderprio=30,entriesperrow=5,entrypointsprefix=/entrypoints,sharedcontent=/wpccontent/Cross-Site Content;/pcd

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

Error: while creating Service Entry Sheet - for HELD PO

Hi experts,
While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as 'Purchase order XXXXXXXXXX incomplete (parked)'.
While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
My question is why the system is allowed me to create SES for a PO which is in HELD status?.
Please help me.
Thanks In advance,
Vinod

Thanks for the reply.
We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status) system is not allowing me to delete/create SES.
Please help me what might be the reason which allowed me on a particulare date.
Thanks in Advance,
Vinod....

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

No table entries found for specified key

Hi All,
I have developed a program to upload data from flat file with the help of GUI UPLOAD. It is succesfully updating data in my Z-table.
Whenever I tried to view the content of table for specific field, message shows No table entries found for specified key. However if I add * as a suffix, it shows the data & when I directly Execute table it also displays the data.
I have also cross checked the spaces before or after the specific content, no space found.
Only two fields are creating this issue Individually (one of them is key field)
Regards
Mukul Maheshwari

Hi Dear ,
Here i had implemented program go through it you can understand easily.
While creating table give one field as primary as you know that.
tables zdata1.
data it_tab type TABLE OF zdata1 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = 'C:\Documents and Settings\E50039\Desktop\data.txt' ***************File path
 HAS_FIELD_SEPARATOR = 'X'
TABLES
 DATA_TAB = it_tab
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT it_tab.
zdata1-no1 = it_tab-no1.
zdata1-name = it_tab-name.
zdata1-empid = it_tab-empid.
insert zdata1.
ENDLOOP.
Flat file
1 name1 empid1
2 name2 empid2
note: Give the tabspace between values in flat file.
Edited by: Aditya.G on Oct 12, 2011 10:22 AM

To make service entry sheet for multiple line items of the service PO.

Hello MM Gurus,
Please help me for the following
I create a service PO with say 10 line items. Then while doing the service entry sheet the system automatically picks the line item 10 by default. When I try to enter the other items it throws an error" unplanned services cannot be entered"
So how to make a service entry sheet which shall include all the line items of the service PO at the same time.
So if I have 100 items in the PO do we make the service entry sheet 100 times against each item? Is there any seeting/solution on this?
Please help.
Regards,
Prasanna.

Dear,
I have two solution for u.
1) Create different service entry sheet -ML81N for each line item and create single invoice verification for all service entry sheet - MIRO
2) Create service purchase order - ME21N for only one line item.
And include all services in service tab available at item detail level of service purchase order. Enter it's quantity and rate.
Than create one service entry sheet for purchase order.
So you can create one service entry sheet for all line item of services.
Note: - Use option 2 for easy process.
Regards,
Mahesh Wagh.

SD - Manual entries allowed for item category in the Sales Order

Hi experts,
please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
Thank you very much
Andrea

Hi,
I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
Has any found solution for this, will this be a CORE MOD.
Pavan Verma

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

How to create a dynamic entry list for an input field in VC(ce 7.1)

Hello all,
I have an Input field, i need to create a Dynamic Entry List for it in VC(ce 7.1).
How can this be done.
Thanks in Advance.
Thanks and Regards,
Santhosh Guptha N

Hi Santhosh,
You can define Dynamic entry list for Drop down list and combo box but not for input field.
[Refer this|http://help.sap.com/saphelp_nwce10/helpdata/en/2a/28249060dd4dbc872f6266f4557364/frameset.htm] for defining entry list.
Let me know if it helped.
Regards,
Dharmi

No entries exist for the selection-FTR_EDIT

Hi Experts,
I created treasury deal in FTR_CREATE, after save the deal systems is prompting Message express document update terminated User Name so and so, after enter Deal is Created in Company Code. But when I check the deal no in FTR_EDIT system is prompting message "No entries exist for the selection", I checked in table VTBFHA also there also deal no is not showing, if try to create Deal again system is taking next available No for the deal. Please share some ideas if you face same kind of issue.
Thanks & Regards,
AIM

Hi Feng,
Thanks for your reply.I tried that one also even though i am not able to reslove, please suggest any other solution.
Thanks & Regards,
AIM

Auto index entry generation for a range of sentences?

Is there any way to mark a range of sentences and associate it with a particular index entry? For a lengthy book, I don't think one can really expect the text to never change, hence regenerating the index needs to continue to work even if a bit of text was added which pushes one of the range of sentences onto the next page.
The closest thing I found was to mark the beginning of the range of sentences with an index entry for "the next 1 paragraph," but this doesn't seem to work. In my example document, http://goldfinches.org/InDesign/Failed%20Index%20Entry.indd the "Dog" entry spans two pages, but only 1 paragraph, and yet the index that is generated only has the first page in it.

Greg,
There is no way to say, index from here to here. But you can use any of the range designators. From what you're describing, the most likely to be useful is the one that indexes up to the next instance of a particular paragraph style.
Dave

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2.

Hi! I have a Creative suite Design Standard 9 Adobe program and I am attempting to make a wizzard form that can be made into an entry form for a competition. So I need to 1. Make the form into a question and answer form that Participants may fill out. 2. make it possible for them to download it via a link on our website 3. make it possible for them to save the info they have written into the form and mail it to the mail we have supplied in the entry form and 4. make it possible for them to put in a jpg. as part of the entry for and lastly 5. make it possible for us to copy paste the document and use it on other platforms. How do I do this - is it at all possible with adobe?

Those requirements are go way beyond what PDF forms can do and are meant for, some of them would require involving other programs or are mutually exclusive and contradictory. You are wasting your time even thinking about doing this as an "offline" PDF form. Simply sign up for an online forms/ survey service like FormsCentral or Surveymonkey.
Mylenium

Is it possible that Manual Journal Entry go for approval

Hi All,
If it is possible to Journal Entry go for approval. I see in Approval Template there is no Document like check box Journal entry, so please any one can help in this.
Regards,
Arbaaz.

Hi,
Use Journal Vouchers instead of journal Entry.
For Ex :
1.User Enter Journal Vouchers.
2. Finance manager or Accts manager open the
Journal vouchers and convert it to Journal Entry.
*Close the thread if issue solved.
Regards
Jambulingam.P

Entry Poinit for PCD

Similar Messages

Maybe you are looking for