Envelope printing is off-centered (Lexmark E238)

I'm trying to print envelopes via my Lexmark E238. However, they print off-centered, so the addressees appear cut-off at the bottom of the page.
If I put in a full sized piece of paper and print on that, it comes out as if the envelope should be justified to the left side of the printer. However, the envelopes have to go in the centre.

This seemed to resolve with the following change in settings:
Paper Handling -> Destination Paper Size: "Scale to fit paper size: Envelope #10" (default setting is: "Use Document Paper Size").
I have no idea why or how this resolved the issue, and properly it shouldn't have. But it did.

Similar Messages

  • I am trying to print a  jpg, centered on the page, to epson printer and the printed image is off center, does anyone have a sense about setting to check?

    i am trying to print a  jpg, centered on the page, to epson printer and the printed image is off center, does anyone have a sense about setting to check?

    right click a blank area of the toolbar, click Customize. You'll see the printer icon there. Drag and drop it to where you want.
    You can also find this option under View -> Toolbars -> Customize.

  • Envelope Printing Incorrectly to HP laserjet

    When installing to one of the Mavericks upgrades last year, my old HP laser jet 3700n would no longer print envelopes correctly from either WordMac or from PrintShop3. I blamed the old age of the printer (More than 10 years) and no recent driver made for it. I purchased a new HP LaserJet MFP M476dw but I have the exact same issue. The envelope appears perfect in print preview but when the envelope prints, the text is perpendicular like in portrait mode and mostly off of the envelope. It doesn't matter the size of the envelope. I have tried changing every setting I could find, altering the dimensions to the opposite length/width, changing the orientation of the envelope feed, but I can't get it right. I can't believe I am the only person with this problem. I called HP and after 2 hours on the phone they said they couldn't help me. I'm not very computer literate and really would like help.

    envelope template

  • Lexmark E238

    Hi,
    I see that several users are having difficulty with printing under leopard. I'm hoping that someone can help me.
    I admit that I have not been happy with leopard at all until the most recent updates, which seem to have fixed a great majority of the issues that I had.
    However, after installing 10.5.3 my Lexmark E238 is dog slow. It wasn't like this until this most recent update. The programs I print from send to the spooler and they just seem to sit there forever.
    Does anyone have a solution?
    Glenn

    A little more detail - when I go to the Print & Fax preferences and click the + button, the Lexmark E238 is listed as a USB device - correctly I might add. It is connected directly to the MAC. If I disconnect the USB cable and reconnect, the printer shows up in the Print&Fax dialog but then disappears again.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Contacts Envelope Print Error

    I have figured out how to print an envelope with a return address, and proper layout even without the bar code (Hello Apple - it's 2015) and the limited text formatting options, but now Contacts prints two envelopes with each print request.
    The problem is that every other envelope prints the addressee name in the line where the street address is on the correctly printed other envelope (which is what I see in preview window).  No street address, city or zip, just the name in the line where the address should be.
    Under the Preview window within the print dialog window is this 'Two addresses()'
    I dont see another address card anywhere for this contact, so where is the other address that I need to delete to stop wasting envelopes?

    Go to your Finder "Go" menu hold the option key to choose "Library".
    Then go to Application Support/AddressBook/AddressBook.data and double-click that.

  • I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't have a wireless printer, and want to print things off of my iPad.  I know that I can use the iPad Camera Connection kit to connect USB devices like keyboards and I am wondering if I could do the same with a USB printer.

    I don't think you can connect a printer since you won't have the printer drivers. I use FingerPrint from collobos.com to print to my non-AirPrint printers.

  • How can i obtain a user guide for the ipod nano 16GB 5th gen. with out printing it off the computor

    How can i obtain a user guide for the ipod nano 16GB 5th gen. without printing it off the computor.

    You can't, at least not the one provided by Apple.
    B-rock

  • Downloaded iOS 7.0.2 and one of my apps (ultimate history quiz) changed size. It is so large I am not able to play the game because most of the print is off the screen on my iPad. Help!!!!

    Had an app (Ultimate History Quiz) that I played frequently. It came up on the screen in the smaller iPhone version. Then I downloaded iOS 7.0.2, and now the app is so big that the printing goes off the screen, making it impossible to play. I checked the app sore to buy another one, and it is no longer available on there.  WHAT CAN I DO TO RESTORE THE GAME TO ITS ORIGINAL SIZE???????

    Wait for apple to tweak things....or talk to the app developer. they haven't updated since the update and unless APple happens to fix whatever the issue is, then the burden is on history to make their app work with the iOS

  • Envelope printing using HP LaserJet CP1525nw color

    I have been trying to print envelopes on our above printer.  My document is in Word and is formatted accordingly for a #10 business envelope.
    Under HP's help feature, I found the appropriate info on how to set up my document's printing options so it would print correctly.  
    The first envelope printed on the flap side; I re-loaded them back into tray 1 and was ready.
    The second envelope printed successfully so I thought I had it figured out.  So I loaded the paper tray with 5 envelopes, hoping to print them en masse.  I couldn't get this to work when I tried to print 4 at once.  I got an error "Jam in Tray 2" and I wasn't even using Tray 2.  I cleared the "problem" and ONE envelope printed successfully, then I got the same error message.
    I got 2 more envelopes printed this way but each time I got the same error message, cleared the machine, and 1 envelope printed.
    Frustrated, I cancelled the multiple print job and tried printing the envelopes one-by-one.  Now it's not working at all even though I clear the phantom paper jam each time.
    Can anyone help with this?  It's driving me nutty.
    Background info:  my husband (network engineer) set up the printer.  I have over 20 years of word processing experience and usually have good results with figuring out printing problems.  This one has me stumped!
    Thanks for any help you can provide.
    Dianne
    This question was solved.
    View Solution.

    The CP1525 does allow you to print envelopes.There are two trays that can be used. I will describe only using the lower tray. Normally this tray is used for standard paper.  To use it for letter envelopes, you need to pull out the tray and then make some changes. Take out all of the paper. There are blue-colored paper supporters. Two are used for the width of regular papers. Slide it toward the center so that it will handle the envelope with the top toward the left side. Put the envelope in with the printable side up and the top towards the left side. Slide the blue paper holders so they touch the top and bottom. Then push the envelope all the way toward the back and then move the single blue paper holder at the front so that it is against the envelope. You are ready to print as far as the printer.
    I have to select properties for the printer. I indicate that I am printing an envelope. I also had to indicate landscape. I also had to move the print areas to fit where I want them to be. Then I added my address and the address to where they are going. I am not sure that I got everything but this should work well.
    I did not do this, but you can use both trays with one that holds a number of pages and the other for a number of envelopes.

  • How do I take a pdf out of my email and transfer it to adobe so I can print it off my pc?

    How do I take a pdf out of my email and transfer it to adobe so I can print it off my pc?

    Hi Sandy,
    I'd like to assist!
    I believe you are asking how to print a PDF from your email? If so, you can save a PDF file to your desktop like any other file (Word, Excel, etc). OR you can print the file directly from your email by opening the attachment and in the top left choosing the 'print' option.
    Please let me know if this helps and do not hesitate to ask further questions if you have them!
    Looking forward to hearing back from you.
    Kindest regards, Stacy

  • Reader XI has the print button off the screen when on 800x600 resolution

    Reader XI has the print button off the screen when on 800x600 resolution as well, how to fix without changing resolution?  A user needs the resolution set to that for her eyes.
    I see that this was an issue in Reader X and update 10.1.3 resolved it.  What was the fix?

    The scrollbar appears and works but unfortunately the dialog size is still too big therefore the print button ends up being hidden by the windows taskbar. Could you please make sure that the print dialog size is calculated against the work area (desktop size minus the taskbar, there's a win32 API to get that) rather than the whole desktop to fix the issue?
    That would also fix another issue: when the taskbar is sized higher than usual whatever the resolution you have it could still end up covering the print buttons but if you calculate against the work area rather than the desktop area that issue would be fixed as well.
    Please don't leave it unfixed because even if the requirements say 1024x768 if you have higher DPI settings or have a taskbar with a non-default size the print button could easily become unreacheable.

  • Why can't I print things off th Internet?

    Why can't I print things off the Internet?

    If you are not experiencing an error message, then try this:
    Smart Print
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • HP PSC 2355 all-in-one printer cuts off bottoms of letters

    My HP PSC 2355 All-In-One Printer cuts off the bottoms of letters. Photos are fine. 3rd HP black cartrige, got worse today.
     On a Mac, 10.9.3.

    Hi @timed 
    I would like to help you with your 2355 printer. A printer reset can initiate an alignment. Please use the following document to troubleshoot the issue, and let me know the outcome of your efforts; Troubleshooting Print Quality Problems with the Diagnostic Page.
    If the issue remains unresolved after following all of the steps in the link above, I recommend contacting HP.
    Don't hesitate to call, although the printer may be out of warranty, the cartridges could be in warranty; therefore, there wouldn't likely be a fee for the phone support. HP will, at HP's option, either replace products under warranty that prove to be defective or refund the purchase price.
    They could even determine after troubleshooting that it is a problem with the printer, in which case they may offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
    To find the “Warranty Ends” date, look in the following table for the date's location on each product. The date follows the YYYY/MM/DD or YYYY/MM format, where YYYY indicates the year, MM indicates the month, and DD indicates the day.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Apple TV Image is off-centered

    I am getting a green line (more like a ~10 pix bar) at the right of the screen when HDMI is set to "auto" in the video settings. When I set it to HDMI:RGB, The green line disappears but the screen is definitely still off-centered to the left. I tried switching back and forth. Sometimes the image becomes centered after the initial switch from "auto" to "RGB" but then moved back to the left again after a second or so. Has anyone experienced this?

    Welcome to the Apple community.
    If you've determined that your Internet connection is good enough to maintain an HD stream (ie on another device), your local network may be suffering from interference or might be improperly configured.

Maybe you are looking for

  • Series recorded don't show in Manage Series Recordings

    Well I thought the new Cisco DVR would be similar (but better) than the Motorola, but although it seems to be working all right, and I have recorded lots of series, there is nothing listed in the Manage Series Recordings list, so I can't change prior

  • JavaFX line chart with data labels onMouseOver

    Hello Is it possible to show the value of a data point in a line chart? Here is an example but in flash: [Example of Data labels|http://www.fusioncharts.com/Demos/Blueprint/Default.asp]

  • Cannot Create a new ALSB Configuration Project in Work-Space Studio!?!

    Hi friends, I am using BEA WorkSpace Studio version 1.1 which gets automatically installed with ALSB 3.0 To get started with the ALSB project development, I try creating a new ALSB Configuration Project But I am getting a pop-up that says- {color:#33

  • Universe on BEX query - Measures Question !!

    Hello All, I am building a Universe on BEx Query. We have the following environment: SAP BOE XI 3.1 SP2 FIX Pack 2.5 Integration KIT SP2 FIX PACK 2.5 SAP BW 701 Level 6 I see that in the BEX query the KF have technical names as "ZZRKF_Amount". But, w

  • Port  management console web

    Hiii everyone, I have a problem. I want to enter to the management console web, I have treated with localhost:50000 but it does not work. All is local. The server, sdm and the dispatcher estan in green. Please How Could I solve this. Or also How coul