EOIO - Could not fail message - Predecessor not in final state

Hi,
I'm using the File Adapter to send messages EOIO and have now a lot of messages stuck with status "HOLDING". When trying to delete the first message with status holding (according to sequential number in the message monitor log) I get the error:
com.sap.aii.af.ra.ms.impl.app.AdminException: Failed to cancel the message locally.
Reason: Could not fail message cb79d5b0-0844-11dc-92ac-0003ba15f2ae(OUTBOUND), as triggered by admin action.
Reason: Predecessor not in final state.
I also cannot not find any message with error in it that could hold up the queue.
I know this question has been up in the forum before, but I can simply not find the
"<i>Predecessor not in final state</i>".
Is there any other way to find the failing message?
Best Regards
Olof

Thanks Bhavesh,
The problem is however that I can't find the failing message even after following the instructions of the blog by Stefan. The messages before the first HOLDING are all SUCCESS messages.
I did delete the queues before, which I think was a mistake, maybe thats causing the "HOLDING" statuses?
Otherwise I guess the suggestions of the blog would be the only way to solve the problem?

Similar Messages

FindByPrimaryKey: Could not find prepared statement with handle 3

I've inherited a WL61 application and been asked to make it work under WL81. We're using SQL Server 2000. We only access two tables. The XML got auto-converted during the upgrade, but I had to correct the RDBMS column names in the weblogic-cmp-jar.xml
The application mostly works except the findByPrimaryKey fails with:
ERROR ExecuteThread: '14' for queue: 'weblogic.kernel.Default' Administrator : TargetSessionBean - Error finding promotion with ID <2>
javax.ejb.FinderException: Problem in findByPrimaryKey while preparing or executing statement: 'weblogic.jdbc.wrapper.PreparedStatement_weblogic_jdbc_base_BasePreparedStatement@95':
java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Could not find prepared statement with handle 3.
java.sql.SQLException: [BEA][SQLServer JDBC Driver][SQLServer]Could not find prepared statement with handle 3.
at weblogic.jdbc.base.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.base.BaseExceptions.getException(Unknown Source)
I've checked the database table and the row exisits with the appropriate PK (in this case a promotion with ID <2>).
In the WL61 version the findByPrimaryKey was explicitly defined in the weblogic-cmp-rdbms-jar.xml as follows:
<finder>
<method-name>findByPrimaryKey</method-name>
<method-params>
<method-param>com.fujitsu.ftxs.corema.server.PromotionPK</method-param>
</method-params>
<finder-query><![CDATA[ (= $0 promotionId) ]]></finder-query>
<finder-expression>
<expression-number>0</expression-number>
<expression-text><![CDATA[@0.promotionId]]></expression-text>
<expression-type>int</expression-type>
</finder-expression>
</finder
But I understand that with WL81 I should no longer define this - it's done implicitly - so I've removed this finder definition.
Any help appreciated. Thanks,
- Andy Abel

I fixed it by switching from the using the BEA driver:-
DriverName="weblogic.jdbc.sqlserver.SQLServerDriver"
URL="jdbc:bea:sqlserver://host:1433"
And using the Microsoft Driver instead:-
DriverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
url=jdbc:microsoft:sqlserver://host:1433
If anyone can explain why the Microsoft Driver works and the BEA driver does not I'd like to know.
Thanks,
- Andy Abel

Could not find prepared statement with handle 1.

[Macromedia][SQLServer JDBC Driver][SQLServer]Could not find prepared statement with handle 1.
I'm getting this error message in what appear to be random ways. The first time I look at a page I might not get it, but the second time I might. I discovered that removing a cfqueryparam tag worked, but that is not really a safe solution. I checked that the cf_sql_type matched the database field, and in one case changed a cf_sql_varchar to a cf_sql_char so it would match a SQL Server nchar(10) field. But still these errors. Any ideas? I've not had any luck Googling this.
I should add that I'm running Coldfusion 9 as a Tomcat webapp on a Linux server. The database is SQL Server 2005, I think.

Here's the one that is breaking now:
<cfquery name="CheckCredentials" datasource="#application.crossreg_dsn#">
                                        SELECT [name_first]+' '+[name_last] as name
                                                    ,p.[uni]
                                                    ,p.email
                                                    ,p.role_id
                                                     ,r.role_name
                                                  ,p.external_program_id
                                          FROM [CrossReg].[dbo].[People] p
                                           INNER JOIN dbo.Roles r on r.role_id = p.role_id
                                          WHERE uni = <cfqueryparam cfsqltype="cf_sql_char" value="#Session.username#">
</cfquery>
Session.username is being returned from a CAS authentication system. I've never had troubles with it before.

Could not find prepared statement with handle %.

Greetings. I've seen several posts for this error on the web, but no clear cut answers. I captured the code below in profiler, with the intention of replaying in mgmt studio.
However, the attempt end in the following error: "Could not find prepared statement with handle 612."
declare @p1 int
set @p1=612
declare @p2 int
set @p2=0
declare @p7 int
set @p7=0
exec sp_cursorprepexec @p1 output,@p2 output,N'@P0 int,@P1 int,@P2 int,@P3 int,@P4 bit',N'EXEC dbo.mySproc @P0,@P1,@P2,@P3,@P4 ',4112,8193,@p7 output,219717,95,NULL,1,0
select @p1, @p2, @p7
Something noteworthy is that my sproc only has 5 input parameters, but this makes it look like it has many more.
How do I manipulate the code enough to make it work in mgmt studio? Thanks!
TIA, ChrisRDBA

In profiler you would normally see RPC:Starting and RPC:Completed. The statement shown in RPC staring is what you need to pick because as Erland explained, completed would show "funky" behavior.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Error: Could not resolve s:states to a component implementation.

So I am trying to setup states on a Flex application I'm building, but it doesn't seem to want to compile. I get this error:
$ ./build.sh
Loading configuration file /Applications/Adobe Flash Builder 4/sdks/4.1.0/frameworks/flex-config.xml
uploader.mxml(24): Error: Could not resolve <s:states> to a component implementation.
    <s:states>
Here is my build command nothing special ...
$ cat ./build.sh
#!/bin/bash
mxmlc -output bin/uploader.swf src/uploader.mxml
I have a class that extends the Spark application like so ...
package com.uploader.controllers
    import spark.components.Application;
     dynamic public class FlashUploader extends Application
Then in my main application mxml file I use it like so ...
<?xml version="1.0" encoding="utf-8"?>
<c:FlashUploader xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
    xmlns:v="com.uploader.view"
    xmlns:c="com.uploader.controllers.*"
    minWidth="709" minHeight="400"
    skinClass="com.uploader.skins.UploaderApplicationSkin">
    <fx:Style source="styles.css" />
    
    <s:states>
        <s:State name="default" />
        <s:State name="startup" />
        <s:State name="uploading" />
        <s:State name="normal" />
    </s:states>
</c:FlashUploader>
Now when I try to compile I get the states error. I've found several examples and even made a dummy app just using the spark application and it compiles fine. Not sure if I'm doing anything weird here but the few other flex devs I know don't seem to see anything wrong with what I'm doing that could cause this.

When you define an object using a namespace you have to use the same namespace for its properties, so you will want to use "<c:states>" instead of "<s:states>" in this case.

Could not find prepared statement with handle 13

Hi,
I'm having a terrible problem: When I try to execute a SQL Query the following exception is thrown:
* "java.sql.SQLException: [Macromedia][SQLServer JDBC Driver][SQLServer]Could not find prepared statement with handle 13."
This exception is thrown is this line:
boolean returnResultSet = ((PreparedStatement)sqlStatement).execute();
The sqlStatement object is a java.sql.PreparedStatement that was received as a Statement in the method definition.
The following query is being executed in this PreparedStatement:
SELECT id_promocao, ds_nome, id_tipo, ds_sinopse, dt_lancamento, pt_site, pt_caminho_relativo, fl_ativo FROM TAB_CINE_GM ORDER BY ds_nome
I'm using Macromedia JRun 4 build 61650 and I'm using MS-SQL Server 2000 as a database server.
If anyone can help, I'll thanks a lot.
Helcio Chaves
S�o Paulo - SP - Brazil
[email protected]

There is a common way to check runtime type:
if (sqlStatement instanceof PreparedStatement)
returnResultSet = ((PreparedStatement)sqlStatement).execute();
else
returnResultSet = sqlStatement.execute();
}By the way - I can't understand why you're trying to cast sqlStatement to PreparedStatement? It doesn't matter at all due to so-called polymorphism of all Java methods (except static ones). Anyway execute() will run for PreparedStatement but bot for Statement
Enjoy,
Pavel

Could not resolve s:states to a component implementation.

i am getting this error.
kindly help..
following is my code:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
creationComplete="init();">
<fx:Script>
    <![CDATA[
      import mx.controls.Alert;
      import mx.core.Container;
      private function init():void{
        checkChildren(this);
      private function checkChildren(objToCheck:Object):void{
                for each(var obj:Object in objToCheck.getChildren()){
          if(obj is Container){
            mx.controls.Alert.show("Container:" + obj.toString());
            checkChildren(obj);
          }else{
            mx.controls.Alert.show("Not container:" + obj.toString());
      import spark.events.IndexChangeEvent;
        public function myLabelFunc(item:Object):String {
             return item.firstName + " " + item.lastName;
        public function myLabelToItemFunc(value:String):Object {
             var tempObj:Object = new Object();
             var spaceChar:int = value.indexOf(' ');
             tempObj.firstName = value.substr(0, spaceChar);
             tempObj.lastName = value.substr(spaceChar+1, value.length);
             return tempObj;
        protected function myCB_changeHandler(event:IndexChangeEvent):void
                 if(myCB.selectedIndex == spark.components.ComboBox.CUSTOM_SELECTED_ITEM)
                     myCB.dataProvider.addItem(myCB.selectedItem);
    ]]>
</fx:Script>
    <s:states >
    <s:State name="si"/>
    <s:State name="re"/>
    </s:states>
<s:BorderContainer borderColor="#0b85b7"
    cornerRadius="8"
    borderWeight="4">
<mx:VBox top="10" horizontalAlign="center" >
<s:ComboBox id="myCB"
            includeIn="si"
            labelFunction="myLabelFunc"
labelToItemFunction="myLabelToItemFunc"
change="myCB_changeHandler(event);">
           <s:dataProvider>
           <mx:ArrayCollection>
            <fx:Object firstName="Abhinav" lastName="Somal"/>
            <fx:Object firstName="Adit" lastName="Kumar"/>
            </mx:ArrayCollection>
          </s:dataProvider>
        </s:ComboBox>
        <s:TextInput id="t1"
            includeIn="re"
            />
          <mx:LinkButton label="show text box"
                click="currentState = 're'" includeIn="si"/>
          <mx:LinkButton label="show combobox"
                click="currentState = 'si'"
                includeIn="re"/>
        <s:TextArea id="t2"
        text="The selected item is: {myCB.selectedItem.firstName + ' '
        + myCB.selectedItem.lastName};"/>
<mx:Button id="b1" label="SEND" >
</mx:Button>
</mx:VBox>
</s:BorderContainer>
</mx:Application>
thnks.

http://livedocs.adobe.com/flex/3/html/help.html?content=using_states_3.html

Could not synchronize

Hi there,
I'm testing a small app while trying to learn Java Persistence . Just a newbie at this...
In my first unit of work I create and persist a ScheduledCourse object like so:
EntityManagerFactory emf = Persistence.createEntityManagerFactory("scholastic");
//First Unit of work
EntityManager em1 = emf.createEntityManager();
EntityTransaction tx1 = em1.getTransaction();
tx1.begin();
ScheduledCourse scheduled_course = new ScheduledCourse(...);
em1.persist(scheduled_course);
tx1.commit();
em1.close();
emf.close();
Up to this point everything is fine.
In my second unit of work I try to remove the instance of that object from the database:
EntityManagerFactory emf2 = Persistence.createEntityManagerFactory("scholastic");
EntityManager em2 = emf2.createEntityManager();
EntityTransaction tx2 = em2.getTransaction();
tx2.begin();
//Retrieve the entity instance from the dbase and make it persistent again
ScheduledCourse sc = em2.find(ScheduledCourse.class, new Long(1));
em2.remove(sc);
tx2.commit();
em2.close();
emf2.close();
When the delete is attempted, I get this error message:
[java] Could not synchronize database state with session
[java] org.hibernate.exception.GenericJDBCException: Could not execute JDBC batch update
Could someone please explain what I may have done wrong? Why isn't the deletion occurring properly?
Alan

Hi Alan
i am also facing the same problem.
please explain how did you resolve it.
you can mail me at abnig19atgmail.com
regards

Could not resolve sparks component with Air 3.6 Beta

Description
Resource
Path
Location
Type
Could not resolve <s:SolidColor> to a component implementation.
ExpandingItemRenderer.mxml
/ProjectTest/src/renderers
line 59
Flex Problem
Could not resolve <s:State> to a component implementation.
ExpandingItemRenderer.mxml
/ProjectTest/src/renderers
line 33
Flex Problem
Could not resolve <s:State> to a component implementation.
ExpandingItemRenderer.mxml
/ProjectTest/src/renderers
line 34
Flex Problem
Could not resolve <s:Transition> to a component implementation.
ExpandingItemRenderer.mxml
/ProjectTest/src/renderers
line 38
Flex Problem
Could not resolve <s:Transition> to a component implementation.
ExpandingItemRenderer.mxml
/ProjectTest/src/renderers
line 47
Flex Problem
This is what i get with the latest Air 3.6 Beta SDK with a mobile project !
FB 4.7 shows the <mx:Transition> potential match but not the <s:Transition>. Its the same for all the other errors it shows the potential matches
Can someone provide a solution I even tried to add sparks.swc as external SWC but it doesn t work.

I Still have theses errors :
Description
Resource
Path
Location
Type
Could not resolve <s:State> to a component implementation.
MessageBox.mxml
line 129
Flex Problem
Could not resolve <s:State> to a component implementation.
MessageBox.mxml
line 130
Flex Problem
Could not resolve <s:State> to a component implementation.
MessageBox.mxml
line 131
Flex Problem
Even if I added the spark.swc
But the other errors are gone !

InfoSpoke fails with message "Could not open file on application server"

BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.

Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help.

When I am writing an email, I get an alert message that says "The message could not be copied or moved to the drafts folder. Writing to the folder failed. To ga

When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
Frank

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

I am trying to create another email account with talk talk. and I keep getting a failed message saying 'mail could not log into the mail server talk talk. Yet I already have another email account with talk talk. Not sure what I am doing wrong

I am trying to create another email account with Talktalk. I already have one account.
I try to input the new email address and password and get a failed message
'Mail could not lot into the mail server talktalk.net.
I have tried several times and keep getting the same message.
Any ideas

Accessing your emails from any computer connected to the Internet or from a Smart phone should be straightforward.
For help on how to set up your e-mail on some of the most common software applications and devices, see How do I set up my TalkTalk email?
If your software application or device isn't listed, all you need to connect to your TalkTalk e-mail mailbox are the TalkTalk e-mail settings. Make sure you use the right email settings for your specific email address.
TalkTalk email addresses only
Login / Username
[email protected]
[email protected]
Incoming mail server
mail.talktalk.net
mail.talktalk.net
Incoming Port
110
143
Outgoing mail server
smtp.talktalk.net
smtp.talktalk.net
Outgoing Port
587
587
Outgoing SSL
Yes
Yes
Outgoing Authentication
Yes
Yes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone"

When I sync my iPhone with iTunes I get an error message that says "iTunes could not sync calendars to the iPhone because the sync server failed to sync the iPhone" How do I fix this?

I had the same problem. I found this site http://itprokb.blogspot.com/2010/10/itunes-could-not-sync-calendars-to.html
It worked for me. Good luck!

EOIO - Could not fail message - Predecessor not in final state

Similar Messages

Maybe you are looking for