EP50 SP6 : Recent notifications - Items to review

Hi there,
one of our customers requested an installation of EP50 SP6 recently. Their old EP50 SP5 KM database had to be attached, which went fine. The cm configuration files have been merged into the new SP6 system.
One problem still occurs : in the 'Recent Notifications' iView -> Items to Review (0/2) is displayed. When clicking the 'Items to Review' link, a new window pops- up showing following error :
java.lang.NullPointerException
at com.sapportals.wcm.control.actioninbox.ActionInboxDetailsControl.init(ActionInboxDetailsControl.java:543)
at com.sapportals.wcm.control.actioninbox.ActionInboxDetailsControl.render(ActionInboxDetailsControl.java:131)
at com.sapportals.wdf.layout.HorizontalLayout.renderControls(HorizontalLayout.java:41)
at com.sapportals.wdf.stack.Pane.render(Pane.java:153)
at com.sapportals.wdf.stack.PaneStack.render(PaneStack.java:65)
at com.sapportals.wdf.ControllerDynPage.doInitialization(ControllerDynPage.java:179)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:91)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:30)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.servlet.WcmHtmlbBaseServlet.service(WcmHtmlbBaseServlet.java:112)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:262)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:134)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:127)
at com.sapportals.portal.prt.core.PortalRequestMana...
I looked at the wcmcontrol.jar file, containting the above classes : SP6 is 4717kb, SP5 is 2672kb.
Could it be that the EP50 SP5 notifcations can not be rendered in EP50 SP6? How to delete the notifications? When going to the two particular files sent for approval, and selecting 'stop approval', the iView still show (0/2). Same when submitting a new document for approval : (0/2) - in other words, changes are not reflected.
Any clue?
Many thanks,
Kevin

Hi,
Only subscribed items within the room, i.e. from room folder /room_extensions/cm_stores/documents/**
Regards,
Sam

Similar Messages

How can I get recent notifications to show up in UWL notification tab?

Hello,
Is it possible to get items that appear in the recent notification iView to show up under the Universal Worklist Notification tab.
For example, when I subscribe for documents in the KM document repository the subscriptions and any changes appear in the recent notification tab. How can I get them to show up in the UWL notification inbox? I've changed the subscription service channnel to add the variable Null on top of e-mail and it does not work.
Your help would be greatly appreciated.
Thanks in advance
Rabih

Location services can run the battery down, so i'd like to know as well, with location disabled.
I have location on for Find My iPhone only, and i'd prefer to keep it that way.
I don't know why they had to mess with the weather in notification center, it was totally great the way it was.
I also have 4s with iOS7.

Customizing the "Recent Notifications" iView

Hey folks
Our client wants to change the SAP standard "Recent Notifications" iView. He thinks (justifiably) that the headers "subscriptions" and "subscribed items" are a bit vague, so we want to change them to more specific titles, like "subscription management" and "subscription alerts".
Two questions:
1. Is there an easy way of doing this?
2. If not, how do I customize the iView? According to the iView properties, it's based on com.sap.km.cm.actioninbox, but I can't find this in a PAR file anywhere...
We're still on EP6SP14.
Thanks,
Chris

Hi Christopher,
With such modifications you always have to choose between "bad" and "worse" - it's just the question which is which...
Of course you could create a new component with a new name based on the original one and also change the role content to refer to the modified application. On the other side, new SPs have new features and removed bugs, and normally you will like to use these advantages. But if you create a modification in a new namespace, the new PARs aren't referenced.
So, as said, you have to decide what would be more important for you - to have the possibility to upgrade with no extra admin tasks to get your old solution running or to use the new version and to redo the modifications. As in this case "redo" primarily means copy the property files to some place, I would definitely advise to go the way described.
When modifying Java code, this question is harder to answer (and there is no general answer at all). It also can make sense to try to only create some small part of a PAR and from within that, to reference the standard implementation - not always possible and at least initially more work. But to decide what makes most sense is really project and customer dependent.
Hope it helps
Detlev

Is there a way to keep the 5 most recent notifications in the notification center?

Whenever I review a notification, they just disappear. I would like to see 5 recent notifications from certain app even if I have already reviewed them.
Thank you in advance!

I ran into the same problem. Here is the fix - all the way on to the right of the control bar there is a down facing arrow with a list icon on it. There you can remove an element from the control bar and transform with the x,y,w,h coordinates/sizes become fully visible with no need for additional clicks. You'll have to decide what you want to remove..I took off graphic styles since this is something I barely use.
see attached image

Recent Notifications iView in Collaboration rooms

Hi!
I'm trying to influence the scope of Recent Notifications iView within a Collaboration Room so that it will show only those new/changed documents that are in the current room.
In Room Template Administration I've tried this with different parameters, but the best result I can get is this:
e.g. 'Subscriptions (2/2)' is shown, but when I click open this link it tells me that there are no items in my inbox. Also, notifications from outside the room are included in the count.
If I leave all mapping-parameters to value 'No mapping', this works better, but then again the iView doesn't show only room specific notifications...
Regards,
Sam

Hi,
Only subscribed items within the room, i.e. from room folder /room_extensions/cm_stores/documents/**
Regards,
Sam

Recent Notification iview and layout set.

Hi gurus,
When I open Recent Notification iview, appear different kind of links: feedback, subscriptions, subscribed items so on. When I press subscription link, is opened a new windows where I can see all my subscription.
For each subscription is shown:
Event Subscribed Item Subscription Owner
Item column is a link that allow me to open a new windows to see details of subscripted object.
My problem is that by default is using Consumer Explorer layout set.
Does anybody know how I can change this layout set ?
Thanks a lot,
Patricio.

Hi,
you have to modify the link which navigates to the navigation iView. To do so, you have to go to the KM configuration, to the global service > Urlgenerator Service. There you find a list of URL's. One is labeled with 'Navigation Servlet'. Here you can enter a different link. You can for example enter the link to the Admin Explorer, you can make a preview in the portal content directory to the Admin Explorer iView an copy the url from the browser and paste it into the URL Generator Configuration (the part beginning with irj).
This changes the links to folders in the recent notification, but I can not tell you, where else in the portal this link is used. Please be careful with this change.
regards
Andreas

Subscriptions in Recent Notification iView

Hi,
I have subscribed a document to a user. Then Recent Notification iView shows the count for the subscribed document like 1/5. Now I click on Subscription link in Recent Notification iView, ideally it should show the latest subscribed doc.
After clicking on Subscription link, it opens a new window and displays the message There are no items in your inbox
Can some one help me to resolve it.
Thanks in advance.
Manish

Hi Manish,
can you precise this. Like
KM SP2 Patch 29 or something the like.
It looks like a known problem to old SP2 Versions, but we need your excat version to eliminate our doubts.
Thanks
Dirk

The "Recently Bookmarked" item in the Bookmarks pull down has disappeared. How do I get it back?

The "recently Bookmarked" item disappeared from the Bookmarks pull down menu.

See [[Restore the default Smart Bookmarks Folders]]

GroupWise recent sent items do not show in sent folder

On GroupWise Whenever I check my sent items folder I am only able to see messages from 2004. I am only able to see my recent sent items from GroupWise Remote. Whenever I am connected locally I can never see my recently sent messages.
Any help is appreciated.
Thanks!

Right-click the Sent items folder...Properties...ensure the settings are as you expect them to be.
>>> jsern<[email protected]> 12/12/2012 11:06 AM >>>
On GroupWise Whenever I check my sent items folder I am only able to see
messages from 2004. I am only able to see my recent sent items from
GroupWise Remote. Whenever I am connected locally I can never see my
recently sent messages.
Any help is appreciated.
Thanks!
jsern
jsern's Profile: http://forums.novell.com/member.php?userid=95879
View this thread: http://forums.novell.com/showthread.php?t=462444

Search option in catalog selection in maintenance notification item, object

Dear Experts,
I have a problem to search & choose the relevent catalog codes in maintenance notification item, in catalog selection pop up when F4 done on object part. Is there any setting to find the relevent codes from the cataloge selection screen or any setting for the FIND option availabilty on the catalog selection pop up.
We are using ECC 5.0.
Kindly provide the solution.
Regards,
Tushar

Tushar,
Your emphasis is on Relevant Codes. This means codes relevant to the Technical Object (Equipment or Functional Location)
For this purpose only SAP has given the functionality Catalog Profile.
Create a Catalog Profile (OQN6) in which you mention the codes relevant to the technical object.
Now mention this Catalog Profile in the Organisation tab of the Technical object. (Equipment or Functional Location).
After this whenever you create a notification on such Equipments/FLs, you will get only those catalogs which you've mentioned in the Catalog Profile
Hope this helps you.
Regards
Jogeswara Rao
PS: Creating a catalog Profile is a IMG activity, which you have to do in Client 200> generate a request> and transport this request to the client of your working.

PM Notification - Item level user-exit

Hello there!
I'm trying to use QQMA0008 user-exit (User Subscreen for Additional Data on Notification Item) in order to add new fields to my notification item, but system is just trying to hinder my purposes... And it's at its best!
I've already customized my client requirements regarding to Notification Header (via QQMA0001 user exit), but I'm facing several new handicaps with the Item enhacement, so let me explain the steps I've followed and, please, make me see reason if anything is wrong with my (unfinished) procedure.
- CMOD: I've created a project and add the suitable components to it. Project is active and I'm sure there's nothing wrong with it (because there are some other enhancements in it, such as the "User Subscreen for Notification Header" I've talked you about, QQMA0001, which is actually working as it should)
- SE80 / SCREEN PAINTER: I've developed a test screen which is, in fact, associated to the user exit I'm trying to get to work: SAPLXQQM 0210
- IMG: Cross-Application Components / Notification / Notification Creation / Notification Type / Define Screen Templates / Define Screen Areas and Tabs ( ? )
What am I suposed to do right now? I mean, if I select my Item tab (10\TAB10), all Screen Areas (sreen blocks) are "grey" (I mean, there's no possible input for these five fields). How can I make the system know it has to show my custom screen/subscreen in the Notification Item tab? It was pretty easy when I worked with the Header, I've just used the "Aditional Data" tab (10\TAB02) and selected the Customer Subscreen (One Screen/Not.Type), '090', in the first Screen Area (it was obviously in "white" mode, I mean, allowed input mode)...
But I just don't know what to do with the Item parametrization! Can you please help me with this matter?
On the other hand... What do I have to do with TQSUB table? I've included a new line in it in order to let the system know about my Header custom dynpro (SAPLXQQM 0100), but now it doesn't allow me to do the same thing (and I can swear you I don't know why)!
System displays the following error message:
Diagnosis
Entries in table TQSUBT cannot be edited in connection with customizing object TQSUB S as table TQSUBT does not belong to customizing object TQSUB S, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.
Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Any ideas?
Thanks in advance, any help will be (kindly) appreciated.
Greetings from Switzerland!

Hi
For this u need to implement the ehancement spot. To achive this u need to implement the ehancement spot in include
LMEPOF7X. And modify the required field in structure mepo.
Regards,
Raghavender.

Error in processing notification , item 0000 in BAPI_ALM_NOTIF_DATA_MO

I got error message when I ran the BAPI BAPI_ALM_NOTIF_DATA_MODIFY
here is the data
Number: 000300121207
Notifitem
REFOBJECTKEY                   QM000300121207
ITEM_KEY                       0001
ITEM_SORT_NO                   0001
DESCRIPT                       TEST
Notifitem_X
ITEM_KEY                       0001
ITEM_SORT_NO                   X
DESCRIPT                       X
I got the return table
TYPE                           E
ID                             IM
NUMBER                         280
MESSAGE                        Error in processing notification , item 000
Do I need to pass anything in this BAPI? Thanks!

This May Help
http://abap.wikiprog.com/wiki/BAPI_ALM_NOTIF_DATA_MODIFY or try searching this BAPI in the SDN forum and you will get a lot of threads.

Integrating "Recent Notifications",- from KM intto Universal worklist

Hi There
Has anyone any experience with integrating The action inbx = "Recent notifications" from KM in the portal into the universal worklist so the users will get a complete picture of notifications from R/3 and also from KM in the portal... Is it duable..How, and is there any info on this..
Thank You very Much
Steen C.C. Hammer

Hi Steen,
Which version do you have?
Regards Ralf

Opening preview/quicktime etc opens all recently viewed items. how do i turn this feature off?

since upgrading to Lion, I've noticed that when opening programs such as preview and quicktime it opens up a slew of recently viewed items. i can imagine how this could be a nice feature for one that is referencing said items, but i find it to be a nuisance and i dont like the screen clutter that comes from this. id like to instead open WHAT I want to open vs what my MBP thinks i might want to look at. is there a way to turn this off? its driving me nuts.

Managing Mac OS X Lion's application resume feature
Disable “Reopen Windows When Logging Back In” in Mac OS X Lion Completely

Disable most recently used items for this field in CRM 2013

Hi,
I have checked "Disable most recently used items for this field " property option for lookup filed in CRM 2013. But it still displaying MRU items on the lookup filed. Can someone please help to fix this ?
Regards,
Thanga

did you try to clean your browser cache? use a different browser?
My blog: www.crmanswers.net -
Rockstar 365 Profile

EP50 SP6 : Recent notifications - Items to review

Similar Messages

Maybe you are looking for