EPC3925 upnp and eth standby issues
Hello,
I have two issues with my residential router EPC3925 which uses firmware epc3925-ESIP-16-v302r125573.
The ISP has not been able to help because they have no knowledge about this stuff.
The first problem is related to the UPnP feature, when the SmartTV is connected to the network the router becomes unreachable with the effect of being impossible to use Internet with all the computers of the LAN.
The problem happens everytime that the TV or the computers send a M-SEARCH broadcast request that causes the router to be unreachable for some seconds, so even pinging it fails.
Disabling UPnP on the router doesn't solve the issue.
The second problem instead is related to the rj45 ethernet interfaces on the router because if one or more computers go in sleep mode sometimes the router will emit a high pitch noise and is completely freezed, it's necessary to switch it off and on to restore the situation.
I would like to know if these issues are known and how to fix them.
Thanks
Hello,
Thank you for your question. However, this community is for Cisco Small Business Products and the EPC3925 is not a Cisco Small Business Product.
Your product is an internet service provider (ISP) supported product. In other words you need to contact your ISP or technology reseller that you purchased this from to help you with your question.
http://www.cisco.com/web/consumer/support/modem_EPC3925.html
http://www.cisco.com/web/consumer/support/prod_modems.html
Regards,
Cindy Toy
e-Support
Cisco Small Business Community Manager
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport
Similar Messages
-
Dataguard 9iR2 using same SID for primary and physical standby issues
Hello, I have been following the Creating Physical Standby Database document from Oracle setting up a physical clone for a 9iR2 database on Solaris 9 environment between two identical workstations. I want to databases to have the same SID for relatively seemless failover however the redo logs are not pushed to the physical clone. when I switch a logfile on the primary and then query v$archive_dest on dest_id=2 I get a status of ERROR and the ERROR is the ORA-12154 TNS service name error.
Here is a summary of my setup:
Primary - SID = PROD1, located on WS001
Clone - SID = PROD1, located on WS002
SPFILE settings on Primary:
*.db_name='PROD1'
*.dg_broker_start=true
*.fal_client='PROD1_node2'
*.fal_server='PROD1_node1'
*.log_archive_dest_2='service=PROD1_node2 optional lgwr async=20480 noaffirm reopen=15 max_failure=10 delay=30 net_timeout=30'
tnsnames.ora on Primary:
PROD1_node2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = WS002) (PORT = 1521))
(CONNECT_DATA =
(SID = PROD1)
listener.ora on secondary:
PROD1_node2 =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = WS002) (PORT = 1521))
SID_LIST_PROD1_node2 =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /export/oracle/oracle_9.2/PROD1)
(SID_NAME = PROD1)
Any input would be appreciated. I can provide whatever else you might need. I thought this was the most pertinent to this problem.
Thanks.
JimI have been looking at the sqlnet.ora files for the two databases
for WS001:
Names.Default_Domain = WS001.example.com
Names.Directory_Path = (TNSNAMES, ONAMES,HOSTNAME)
for WS002:
Names.Default_Domain = WS002.example.com
Names.Directory_Path = (TNSNAMES, ONAMES,HOSTNAME)
I cannot connect with sqlplus from WS001 to WS002 on the other machine. -
Time zone difference between primary and physical standby
Dear Team,
We have Primary database server (with EST Time zone) and physical standby (with PST time zone), in case of switch over/fail over to physical standby
what are the major impacts.
Is it mandatory to be in time sync?
Thanks in advance
AjCURRENT_TIMESTAMP
04-FEB-10 10.22.20.444692 AM +05:30
( above is same on primary and standby)
SQL> select systimestamp from dual;
SYSTIMESTAMP
03-FEB-10 08.52.46.934125 PM -08:00
(above is 3hr diff from primary and standby)It is 13hrs difference
One is around Indian subcontinent and other should be in US western region ?
Systimestamp is the timestamp of the OS of the server and hence the difference and the sysdate value will be from systimestamp and if the applications uses SYSDATE then there can be an issue... -
Hi,
bdump, cdump, udump, folders are accidentally removed from the primary database and the primary is not coming up now showing an error unable to create audit file.
The standby is also not working properly when i issue the command ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH.
It is showing a series of error messages:
alter database recover managed standby database finish
ERROR at line 1:
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 1: '/u01/app/oradata/ARG/system01.dbf'
ORA-01110: data file 1: '/u01/app/oradata/ARG/system01.dbf'
ORA-01115: IO error reading block from file 1 (block # 1)
ORA-27069: attempt to do I/O beyond the range of the file
Additional information: 1
Additional information: 1
Please help me come out of this situation.
Thanks,
Aswin.Hi,
Comment all the parameters of AUDITING in the prameter file and start DB,Dont forget to creat cdump udump bdump directories.
If the primary database size is small u can just create the standby control file in primary database copy it to standby location,then copy all the datafiles of the primary to the standby location and put standby in managed recovery mode.
Regards
Kaunain -
Hi, I've read about several battery issues posted by others, and usually drainage issues involve leaving wifi on, etc. First of all, I heart my touch, functions perfectly (knock on wood). However, sometimes (but not that often) when I leave it on standby (with no wifi on), the next time i turn it on it either doesn't turn on at all (b/c its drained), or gives the empty sign. I find it happens mostly when I leave it on standby for a long period of time (30 hours+ for example). Is standyby not meant for very long periods?? And it's also a bit chilly in here sometimes, but not too cold. Is this normal?? PLZZ tell me it's not a defective battery problem, b/c it has been soo good so far. Thanks a bunch.. @.@
I have a similar issue. I got mine yesterday -- and my cell standby is consistently at 35-40% and my time without signal has never been over 10%. When I got it yesterday, I had to recharge it twice, and I don't think I used it more than an average user would. So anyway, I recharged it and took it off the charger at 9-ish this morning and I was down to 50% battery usage after 4 hours. The only thing I'd done was text a few times and play Angry Birds for 10 minutes tops. I somehow managed to make it last the rest of the day, but that was because I barely touched it and only texted a total of maybe 50 times.
I haven't tried the *228 option yet because I'm afriad I'll do something to mess up my phone further. But if someone could help both of us out, that would be awesome. I'd hate to take this phone back because I love everything about it except for the battery life. I mean, it's still under warranty and I have another what, 12 days to take it back to the store, but that's a huge hassel that I really wouldn't have liked to deal with in the first place. -
Sierra Wireless EM7345 ThinkPad 8 and 10 general issues
This was posted as a reply to german forum but it was deleted Symptoms (mobile connection is connected)
1. mobile connection randomly disconnects. It is possible to reconnect again. 2. when resume from Connected standby mode the mobile connection appears to be connected but it is dead. It is not possible to disconnect nor turn off the mobile connection, it is stuck. Windows restart is required to resolve it. 3. when resume from Connected standby mode the EM7345 composite device disappears at all from Device Manager and new unknown device '1 CDC' appears. Windows restart is required to resolve it. Note: Issues 2 and 3 occurs when running on battery only. I don't have any occurence when the tablet was plugged in AC, turned off (into Connected standby mode) and on, yet. I have already tried to reinstall the 1.6.10513.4153 driver, no luck. I have also tried to disable 'USB selective suspend' feature in driver settings and switch off GNSS device (because it has Sierra Wireless driver), no change. I have latest BIOS 1.24 (ThinkPad 8, 64 bit). It is hard to reproduce the case 3 but I have almost reliable steps: 1. uninstall current driver (even it is the latest version)2. restart3. install current 1.6.10513.4153 driver, select Custom Setup, make sure the 'WWAN Logging Tool' is selected, finish the installation4. restart 5. establish mobile connection6. go to Start menu, Intel group, start 'M.2 WWAN Logging Tool'7. press Start Trace button8. turn off the tablet (while the tracing is running) by power button, wait for a minute 9. turn on the tablet(repeat steps 8 and 9 multiple times, in case you can not reproduce it at the first time) EM7345 device disappears with typical unknown 1 CDC device. Yes, it is not a standard operation but it is easily reproducible with the same result. Similar issue is reported in other forum posts for ThinkPad 8 and 10
http://forums.lenovo.com/t5/ThinkPad-Tablets/Thinkpad-8-with-Sierra-Wireless-EM7345-Driver-or-Firmware-issue/m-p/1758961http://forums.lenovo.com/t5/ThinkPad-Slate-Tablets/Tablet-8-win-8-1-unbekanntes-Gerät-1-CDC-kein-mobiles-breitband/m-p/1839400http://forums.lenovo.com/t5/ThinkPad-Tablets/Thinkpad-10-EM7345-stops-working/td-p/1742115http://forums.lenovo.com/t5/ThinkPad-Tablets/Flaky-WWAN-in-ThinkPad-10/m-p/1793007 Additional related issue - firmware update does not work
Old firmware 1.1 that can not be updated to 1.2, read this thread http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T540p-Sierra-WWAN-EM7345-reliability/m-p/1839271#M106663 The 1.2 firmware might help to resolve the issue (although this post states it actually did not help). Technical details When the USB composite device (EM7345 = WWAN + GNSS) disappears it incorrectly identifies itself as VID = 1519, PID = F000 so Windows can not find proper driver for the device and displays it with (?) icon. If you remove the '1 CDC' device from Device Manager and perform 'Scan for hardware changes' this time it is correctly identified as VID = 1199, PID = A001 and installed (these tasks can be automated using devcon.exe command-line tool, so the fix wouldn't require OS restart everytime it occurs. It is still hack, not a solution). It looks like a firmware bug because the USB composite device and WWAN MBIM device uses Microsoft generic driver. Summary Given the price tag of ThinkPad 8 and 10 tablets, Lenovo should fix that because this is basic functionality failure. Disappearing WWAN device that needs full restart is really serious issue. And again, please diagnose and resolve the issue (hint , hint) instead of "try to reinstall this, try to reinstall that, replace this, replace that" advices. It leads to nowhere because the driver/firmware is buggy as it was in the past with Ericsson device. (copy of the post is stored)More details. I installed USB Device Viewer from Windows Driver Kit to get some information. When the EM7435 device is healthy: [Port3] : USB Composite Device
Is Port User Connectable: no
Is Port Debug Capable: no
Companion Port Number: 0
Companion Hub Symbolic Link Name:
Protocols Supported:
USB 1.1: yes
USB 2.0: yes
USB 3.0: no
Device Power State: PowerDeviceD2
---===>Device Information<===---
String Descriptor for index 2 not available while device is in low power state.
ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: High (is not SuperSpeed or higher capable)
Device Address: 0x05
Open Pipes: 6
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0xEF -> This is a Multi-interface Function Code Device
bDeviceSubClass: 0x02 -> This is the Common Class Sub Class
bDeviceProtocol: 0x01 -> This is the Interface Association Descriptor protocol
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x1199 = Sierra Wireless Inc.
idProduct: 0xA001
bcdDevice: 0x1729When the EM7435 device disappears and is shown as unknown '1 CDC' device [Port3]
Is Port User Connectable: no
Is Port Debug Capable: no
Companion Port Number: 0
Companion Hub Symbolic Link Name:
Protocols Supported:
USB 1.1: yes
USB 2.0: yes
USB 3.0: no
---===>Device Information<===---
String Descriptor for index 2 not available while device is in low power state.
ConnectionStatus:
Current Config Value: 0x00 -> Device Bus Speed: High (is not SuperSpeed or higher capable)
Device Address: 0x02
Open Pipes: 0
*!*ERROR: No open pipes!
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0x02 -> This is a Communication Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0x1519 = Comneon GmbH Co., Ohg.
idProduct: 0xF000
bcdDevice: 0x1234 I have also tried to diagnose what exactly happens after returning from Connected standby usingUSB hardware verifier but as usually I can not reproduce it while the tool is used -
RMAN BACKUPS AND ARCHIVED LOG ISSUES
제품 : RMAN
작성날짜 : 2004-02-17
RMAN BACKUPS AND ARCHIVED LOG ISSUES
=====================================
Scenario #1:
1)RMAN이 모든 archived log들을 삭제할 때 실패하는 경우.
database는 두 개의 archive destination에 archive file을 생성한다.
다음과 같은 스크립트를 수행하여 백업후에 archived redo logfile을 삭제한다.
run {
allocate channel c1 type 'sbt_tape';
backup database;
backup archivelog all delete input;
Archived redo logfile 삭제 유무를 확인하기 위해 CROSSCHECK 수행시 다음과
같은 메시지가 발생함.
RMAN> change archivelog all crosscheck;
RMAN-03022: compiling command: change
RMAN-06158: validation succeeded for archived log
RMAN-08514: archivelog filename=
/oracle/arch/dest2/arcr_1_964.arc recid=19 stamp=368726072
2) 원인분석
이 문제는 에러가 아니다. RMAN은 여러 개의 arhive directory중 하나의
directoy안에 있는 archived file들만 삭제한다. 그래서 나머지 directory안의
archived log file들은 삭제되지 않고 남게 되는 것이다.
3) 해결책
RMAN이 강제로 모든 directory안의 archived log file들을 삭제하게 하기 위해서는
여러 개의 채널을 할당하여 각 채널이 각 archive destination안의 archived file을
백업하고 삭제하도록 해야 한다.
이것은 아래와 같이 구현될 수 있다.
run {
allocate channel t1 type 'sbt_tape';
allocate channel t2 type 'sbt_tape';
backup
archivelog like '/oracle/arch/dest1/%' channel t1 delete input
archivelog like '/oracle/arch/dest2/%' channel t2 delete input;
Scenario #2:
1)RMAN이 archived log를 찾을 수 없어 백업이 실패하는 경우.
이 시나리오에서 database를 incremental backup한다고 가정한다.
이 경우 RMAN은 recover시 archived redo log대신에 incremental backup을 사용할
수 있기 때문에 백업 후 모든 archived redo log를 삭제하기 위해 OS utility를 사용한다.
그러나 다음 번 backup시 다음과 같은 Error를 만나게 된다.
RMAN-6089: archive log NAME not found or out of sync with catalog
2) 원인분석
이 문제는 OS 명령을 사용하여 archived log를 삭제하였을 경우 발생한다. 이때 RMAN은
archived log가 삭제되었다는 것을 알지 못한다. RMAN-6089는 RMAN이 OS 명령에 의해
삭제된 archived log가 여전히 존재하다고 생각하고 백업하려고 시도하였을 때 발생하게 된다.
3) 해결책
가장 쉬운 해결책은 archived log를 백업할 때 DELETE INPUT option을 사용하는 것이다.
예를 들면
run {
allocate channel c1 type 'sbt_tape';
backup archivelog all delete input;
두 번째로 가장 쉬운 해결책은 OS utility를 사용하여 archived log를 삭제한 후에
다음과 같은 명령어를 RMAN prompt상에서 수행하는 것이다.
RMAN>allocate channel for maintenance type disk;
RMAN>change archivelog all crosscheck;
Oracle 8.0:
RMAN> change archivelog '/disk/path/archivelog_name' validate;
Oracle 8i:
RMAN> change archivelog all crosscheck ;
Oracle 9i:
RMAN> crosscheck archivelog all ;
catalog의 COMPATIBLE 파라미터가 8.1.5이하로 설정되어 있으면 RMAN은 찾을 수 없는
모든 archived log의 status를 "DELETED" 로 셋팅한다. 만약에 COMPATIBLE이 8.1.6이상으로
설정되어 있으면 RMAN은 Repository에서 record를 삭제한다.Very strange, I issue following command in RMAN on both primary and standby machine, but it they don't delete the 1_55_758646076.dbf, I find in v$archived_log, this "/home/oracle/app/oracle/dataguard/1_55_758646076.dbf" had already been applied.
RMAN> connect target /
RMAN> CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
old RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters:
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
new RMAN configuration parameters are successfully stored
RMAN>
---------------------------------------------------------------------------------- -
Gmail/Exchange email and calendar syncing issues
I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!Hi JadeyMU,
How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
My experience with Apple TV and HDMI/HDCP issues
I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
Interesting and an imporatant issue at sales order schedule line.
hi all,
interesting and an imporatant issue at sales order schedule line.
i created a sales order with 10 qty.and the system proposed a two schedule lines.
let's say to order created date is 27.11.2008.and the requested delivery date is 27.11.2008.
but the stock is not available today then the system proposed two more schedule lines apart from the 27.11.2008.so now there are three schedule lines like below.
schedule line date Material availabilyt date delivery date
27.10.2008 with zero quantity.
28.10.2008 with 5 qty. 28.10.2008 29.10.2008
02.10.2008 with 5 qty. 02.10.2008 03.10.2008
now the delivery and pgi already for the schedule line 28.10.2008.
then when i run the availability check on 01.11.2008 system is over writing the material vailability date as today at the scheduleline number two.
now i can able to view only two schedule lines only.
schedule line date Material availabilyt date delivery date
28.10.2008 with 5 qty. 01.11.2008 29.10.2008
02.10.2008 with 5 qty. 01.11.2008 02.11.2008
now my concern when we reschedule the avalability check it should notchange the Material availability date of the schedule line which i already delivered.
Regards,
sheshukumarcan any one repsond for this.....
-
Data guard synchronization after link down b/w primary and physical standby
Hi All,
I have configured data guard on oracle 11gr2 db. Normally switchover between my primary and physical standby happens smoothly and the Apply lag would be zero. Recently We had to test a scenario when the network link between Primary and Physical standby is completely down and Physical standby is isolated completely for more than half an hour.
When we brought up the link every thing worked smoothly but apply lag started increasing from 0 to around 3 hrs. And then it started reducing to 0. Currently Apply lag and transport lag shows 0.
But is this normal behaviour of oracle data guard that when the link between primary and physical standby is completely down, It requires 3-4 hrs for resynchronization ??? Even when during isolation, there were very few transactions happend on primary database ??
Are there any documents available for this scenario??
ThanksHi, after the link is up, if there were some transactions and produced archive logs it's normal to take some time for resync. To check if 3-4 hours is normal or not, you can repeat the scenario and this time check
- how many archivelogs does primary produce in this period.
- after the link is up, does archivelog transfer immediately starts from primary to standby? Is primary able to send these archivelogs parallel?
- Is there anything wrong with the apply process?
check primary & standby alert log files, and run this query on standby to check the transport and apply processes:
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
regards -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Report Builder - Last page issue and Report Footer issue
I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards -
Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.
Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy
Maybe you are looking for
-
Using same external hard drive with two Macs
I use two Lacie external hard drives and Time Machine to back-up my iMac, swapping over the drives each week to have one off-site. I am soon to buy a MacBook. Can I use the same external hard drives for the MacBook's Time Machine back-ups, whilst con
-
Hello, does anyone have any advice on how to sort photos in an albumn on an Iphone by date of photo? I've ordered them all in my Pictures but then when I sync them across through Itunes, they all end up in a jumble on my phone. Thanks!
-
How to use Fuzzy Logic Controller for transfer function in labview control and simulation loop?
I am facing problem with fuzzy PD logic controller for transfer function in control and simulation loop. Plz Help me in this regard................... i have attache snapshot of my program Attachments: fuzzy in simulation loop.JPG 52 KB
-
Hello! Had a couple of questions on the Imac. Im looking for a new desktop, but im puzzled that the HP HDX has a higher spec than the Imac (With full spec) Why is that?
-
How to compile opencl on mac 10.8.4 terminal.
How to compile opencl on mac 10.8.4 terminal. I have tired "gcc -o main main.c -framework OpenCL". It cannot work.