Equium A200-196: Cannot get all speakers to work with Creative T7900 home cinema system

I run windows Vista home premium, on my Toshiba Equium A200-196, and i have a 7.1 Creative T7900 system.
I cannot get all speakers to work. Only the woofer and two front speakers are currently playing sound.
The sound option in the control panel doesn't give me any options besides stereo speakers.
I have no option of selecting 5.1 or 7.1 speakers and i need to know do i need a software driver (all drivers are showing up as up-to-date), or do i have to change some other option, or purchase an external sound card?
I only have two jack inputs, a mic in and headphone out. How can i get all speakers to work and achieve the home cinema experience?

Hi there,
I dont think that the sound card is capable to do 5.1/7.1 since there are many more jacks required then only one "sound-output".
If I were you I would purchase a external USB-soundcard which is capable to do 5.1 or 7.1 to deliver you the full home-cinema experience.
Another solution is not existent. Sorry mate.
greets

Similar Messages

We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

Refresh all your devices before reconfiguring printer to connect to your computer.
a Shutdown computer
b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
d Once router is ready , put back brick at the back of the printer to turn it on
e Wait one minute
f Turn on computer
Repair your disk permission: http://bit.ly/OeD7U3
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website http://bit.ly/ToA1fo
Run firmware update http://bit.ly/AcNqbg

HP Photosmart Printer-cannot get the apps to work with a USB hook up

I purchased a HP Photosmart Printer C310 and hooked it up to a USB, not wireless. The apps on the printer will not work, says it has to be on wireless for those features to work. When I purchased it the guy said I could use those apps even if it was on a USB hook up? Any ideas of how to get the apps to work without the wireless?

Make sure you have done this to reset the iPod
http://support.apple.com/kb/ht1320
and that you have restarted your computer since this problem occurred. You should also try disconnecting all USB devices from your computer including hubs (except standard keyboard and mouse if normally used), and connecting the iPod by itself to a direct USB port.
There are no iPod viruses. But data corruption on the iPod's storage is possible.
If doing the above does not help, you may want to do a Restore on the iPod, from the iPod's Summary tab in iTunes. This will erase the iPod, re-install its software, and set it to default settings. If data corruption or a software glitch is causing the problem, a Restore should fix it.

Satellite P300-150 PSPC4E: Cannot get Express Card slot working with XP

Hello.
I have downgraded to XP on my machine and unfortunetly I am unable to get the Express card slot to work.
The Intel chipset drivers on the Toshiba site haven't dont anything.
I am trying to get an eSata port working via the express card like I did with Vista but no joy at all.
Any ideas?
Regards
Rob

Go to Device Manager and check if the express card is installed properly, or if its reporting an error.
You should update the BIOS to the latest version. BIOS updates can sometimes fix problems like this.
And ensure you have XP Service Pack 2 or 3 installed.

I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
Is there a new printer out there that will work with 10.5?
Thanks,
Niles Stroh

Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

Cannot get internal speakers to work. Only works with headphones or external speakers?????

All of a sudden my MacBook Pro internal speakers are not working. The status bar at the top of the screen shows everything bold and in black print but now the speaker volume symbol shows just the gray color and will not allow me to adjust the volume. However, when I plug in headphones or external speakers the symbol becomes bold and black the way it should and everything works just fine??? How do I correct this?

Go step by step and test.
1.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
Best.

Cannot get any SSD to work with my mid 2012 13 inch macbook pro!! PLEASE HELP!

I have tried over and over and NO ssd seems to work. All I get is a blank screen. This is very strange because I had a 128gb crucial m4 running firmware 000f for about 8 months before I decided to upgrade and never had a problem with it, not a single beach ball. Now when I decide to upgrade the 128gb m4 with a 256 m4, I run into problems. I returned the 256 m4 thinking that the drive was defective, and I purchased a Samsung 840 250gb to see if I would have any luck with that one. NOPE. Still didnt work. As a last resort I went with the intel 520 240gb, and still nothing. Im extremely puzzled by this. Especially since I was alredy running a ssd on my machine prior to deciding to upgrade. ALL the ssd's I tried were brand new and sealed and the method for installing the OS on them was by using carbon copy cloner. Anybody know whats going on? Anybody else experiencing/experienced the same?? Did I ruin my mac?? Right now I am using a Western Digital scorpio black 7200rpm 500gb hard drive and it works just fine. The problem seems to happen only when I decide to upgrade to a ssd. Oh, and by the way, I am running Mountain lion 10.8.3

I'm running 10.8.3 with a 512GB Crucial m4 SSD and having no problems. It sounds as if you've a problem with your SATA cable, which will rear its ugly head more often with SSDs than with hard drives.
If I were you, I'd order a new SATA cable (from ifixit or PowerBookMedic or maybe even OWC). Then try out a new SSD. See if your problems are fixed then.
Clinton

Cannot Get My Powerbook To Work With New Hard Drive

My powerbook (1.67 ghz, 2 gb ram, 80 GB original hdd) was running out of room on the hard drive, so I purchased a WD 250 GB hard drive IDE to replace it. I haven't really done much on my powerbook prior to this, so I wasn't sure exactly if any problems had occured before I did this. But I replaced the drive and tried to boot from a CD and could not do it. I was using a Tiger Retail disc because I can't find my restore discs. I never had any problem reading my discs prior to this, as I have a DVD/RW drive and it has never failed on me. I tried booting from other discs as well and the same problem occured. So after several failed attempts, I connected my powerbook to my ibook through target mode and was able to install the OS on the partition of my powerbook. After completing the install, I was able to access the powerbook partition through the ibook and everything seemed fine. I unplugged the firewire cable and tried to boot my powerbook. The first time I did it, it took me past the white and grey apple screen and stuck on the blue screen, everytime after that, it hung up on the grey and white screen. I tried resetting everything through open firmware and zapping the PRAM, but no change. I tried booting into safe mode and it hung up at the grey and white screen. I was able to boot into single user mode and ran the check utility and everything came up ok. I reconnected the powerbook to the ibook and ran disk utility that way and repaired all permissions. It still has hung up on me. I've been trying to get this to work for almost 8 hours and nothing has worked for me. I'm starting to think its something really serious like a hardware failure. I don't know what version of tiger my powerbook shipped with and I'm not sure if having just 10.4 would cause this issue. I tried removing the added ram and everything as well. I hope someone can give me some things to try and hopefully get it to work. I'm pulling my hair out on this one. Any help would be greatly appreciated.

One way to know if it is a hardware issue (or something you may have done in the DIY upgrade process, sorry) is to try putting back in the old stock 80GB drive and see if everything works well.
If YES, then your PowerBook is fine and it is your new drive that is faulty. Return it or get a replacement under warranty (if relatively new, maybe you don't need to use the warranty).
If NO, then something has happened during the upgrade process.
That's my first diagnosis.

Cannot get 6.1 Sound working with my Audigy 2 ZS Plati

Currently the Onkyo HT-S770 system I have is set up properly and works fine with my Xbox. However, when playing music from my computer it only comes out as 2.. When I run all the speaker tests from the THX setup console, I can only hear noise from the front left and right speakers. They are set up for 96 khz Digital Output(using digital optical from the front panel) and are set to 6.. I have also checked the CMSS3D box in the EAX console.
Any help is greatly appreciated.Message Edited by sjabarri on 0-0-2005 06:33 PM

Sjabarri,
This article should answer your question:
http://us.creative.com/support/kb/ar...p?l=2&sid=4858
Jeremy

HP Photosmart Plus ePrint. Cannot get air print to work with email address

Have installed HP Photosmart Plus with ePrint Wireless. Have been unable to get unit to print email messages submitted as advertised. Any suggestions?

Hi dturner,
I'll need additional information to assist; are we using Airprint or an Apple device email client and using ePrint? What device are you trying to print from? What is your current netrwork configuration (router make and model, wireless or ethernet etc)
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

HT3771 Hi, I cannot get my HP2200dn to work with my Intel macs after updating to Snow Leopard

Since installing Snow Leopard I can only print using my HP Laserjet 2200dn mono laser printer if I print via my old G4 which is running Tiger.
The G4 has the HP printer as a shared printer and is connected using Appletalk.
Obviously this is very inconvenient as the old G4 is not always on!
I have downloaded and installed two lots of Apple printer driver updates, along with the latest version of Gutenprint.
I have tried resetting the printing system, all to no avail.
No matter what I try the printer keeps pausing before doing anything and pauses again within a few seconds of restarting.
I have tried various printer drivers with no effect, including the Gutenprint one.
Any help gratefully received!

Thank YOU for notifying us of the solution that worked. Very much appreciated. May work for other users with the same issue as yourself.

Cannot get ITS SSO to work with EP6 Sp15

I am having problems with SSO from EP6 to ITS (my EP5 to the same ITS works great).
This is what I have done.....
It is a R3 4.6C system so I wondered if any patches were needed....however I have got SSO working with the SAP Win GUI - so this tells me that the R3 system and the imported verify.der certificate is OK.
The connection test for ITS works - so this tells me the parameters in the System are correct.
The parameter mysapcomusesso2cookie is set to 1 - and this is the same ITS system that is used for SSO between the EP5 portal and R3....and it works in this case.
I have set only the following parameters in the System:
ITS Description = Test1
ITS Host Name = myportal.com:91
ITS Path= /scripts/wgate
ITS Protoco = http
Logon Method = LOGONTICKETS
Anything else I may be missing?
Thanks
Patrick

Hi
What mean "FQDN"?
I must 'dots' in my address..?
Bogdan

TS1574 I cannot get my sound to work! I have tried everything. Help?! :(

I cannot get my sound to work. I have checked the system prefemces and nothing shows up, and nothing is editible. I have rebooted and restarted it one million times, in safe mode too. When ever I try to adjust the volume a crossed out cirlce appears. I have no idea what people say about a red light, but I've checked and I cannot see one. I don't know what to do. Help? Thanks so much in advance.

Have you tried a PRAM reset?
http://support.apple.com/kb/ht1379
Do the earphones work?
Ciao.

Certain keys not working on Equium A200-196 after Windows 7 update

Hi all, I've just upgrade my partner's laptop (a Toshiba Equium A200-196) to Windows 7 after initially installing Windows XP on it (it came with Vista).
After the XP update, I noticed certain keys weren't working. I can't remember the process I used to fix the issue, but fix it I did, and they were all soon working perfectly. So it was a software issue, rather than hardware. I think it may have had something to do with the FN key - but I can't be sure.
Now I've just upgraded the same machine and I have exactly the same problem. The keys that don't work are Backspace, W, P, F, H, K and L.
Can anyone help please? I've tried reinstalling Win7 and the problem is still there.
Many thanks,
Andy

>The keys that don't work are Backspace, W, P, F, H, K and L.
These keys have nothing to do with the missing software.
Indeed, the function key (FN key) needs an installation of particular Toshiba utility / software to get it working but the Backspace, W, P, F, H, K and L keys are common keyboard keys which dont needs any special software.
Therefore I think the issue is hardware related: simple keyboard malfunction.
I guess all these keys would work properly if you connect and use external USB keyboard.

Satellite Pro A200 PSAE1E: Cannot get hotkeys working on Win XP

Hi,
I have a Satellite Pro A200 PSAE1E which came with Vista on it, I have reinstalled it with Win XP Pro installed the relevant drivers from the Toshiba download page but cannot get the hot keys working.
I have installed the controls and control driver but this does not seem to work. Have seen a posting about 'common module' somewhere but can't seem to find any links to download it on the download page.
Can anybody help?
Many thanks
Iain

The Controls utility and the Controls driver allow you to customize and preset TOSHIBA special button settings. But these are not a FN keys!!!
You need to install the Hotkey Utility if you want to use the FN keys.
Further hint:
Its important that all Toshiba drivers and Utilities are installed in the right order.
On the Toshiba driver page you will find a txt file called installation instruction.
Please install all the drivers and tools in the order mentioned in this instruction!
Greetings

Equium A200-196: Cannot get all speakers to work with Creative T7900 home cinema system

Similar Messages

Maybe you are looking for