[ER] Custom "All" label in af:selectManyChoice /

Hi,
We need to a show a different "All" label depending on the gender of the items of the <af:selectManyChoice /> component. As our application main language is French, it is considered an usability issue.
Currently, we can customize the label with skin resources, but cannot change it on a case by case basis.
Thank you!
Olivier

Hi,
"Currently, we can customize the label with skin resources, but cannot change it on a case by case basis."
Why ? Skins can be changed at runtime. So if you have a base skin and s subskin that extends the base skin (but uses whatever different label you need) then this should do the trick.
Instead of hardcoding the skin family name in the trinidad-config.xml you refrence it to a managed bean or session attribute using EL. This allows you to change the skin at runtime
Frank

Similar Messages

Custom "All" label in af:selectManyChoice / with Skinning

Hi everyone,
I would like to continue this thread :
[ER] Custom "All" label in <af:selectManyChoice />
Where was discussed about the af:selectManyChoice component. I'm currently using jdev 11.1.2, and I realised that none attribute was created in order to custom "All" label.
I wanna do this requirement with Skinning, but I didn't found how can I do this? Anyone can help me?

Check the sample where the label for 'All' is modified to 'Entire Set of drinks':
http://adfsampleapplications.googlecode.com/svn/trunk/SelectManyChoice.rar
Check for SkinBundle.properties which has the key and is registered in trinidad-skins.xml
Thanks,
Navaneeth

Sort Custom Phone Labels?

Just went to add a new phone number for one of my contacts (iPhone 5, current version of iOS 7). When I click on the phone label (for example, main, home, mobile, etc.), I noticed that all the custom labels I've added over the years seem to be in the order they were added. Given that I have dozens of them, it took a while to scroll through the list to find the one I was looking for.
Anyone know of a way to sort these alphabetically?

This feature joins a long list of things that moved backwards rather than forward with the introduction of iOS7. The new operating system compromised this feature creating havoc in custom-made labels. Thousands of users (including me) have sent emails to Apple customer support requesting that the ability to correctly sort be corrected and restored. As of 7.1.1 we are still waiting for a fix.

Unable to create custom phone labels for new contacts since the upgrade

I have a AT&T iphone 4 version 4.3.1 and since the last couple of recent upgrades I have been unable to create custom phone labels for any new contacts because the lower label options are gone. This is only a problem with new contacts. My existing contacts with custom labels are still there and if I edit those contacts the table that has create custom labels is also still there, but not for new contacts. Has anyone else noticed this problem.

If you read the error above about the hash and manifest, you will se this is a RB Setup error and not a CM12 error. You would be better to post your question in the SQL forum or better yet to use BIDS instead.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Remove custom attribute labels

Hi.
Does anybody know how remove the custom attribute labels on a page.
Thanks
Portal version 9.0.2.6.18 and 9.0.4.0 (10g)

Try below:
http://www.harbar.net/archive/2012/07/23/sp13adi.aspx
http://social.technet.microsoft.com/Forums/office/en-US/d183d133-7fdd-4053-a2ef-dd09b892bf33/error-when-i-get-the-custom-property-an-administrator-must-create-this-property-in-the-profile?forum=sharepointdevelopmentprevious
This error indicated that the property is not exist in the UserProfile properties. I think you need first to check out the "ZipCode" has been created in your default user profile.
Create custom profile property:
http://technet.microsoft.com/en-us/library/cc262327.aspx#create
In code, it is a good practice to make sure the specific property whether it exists or not.
SPSite site = new SPSite(SPApplicationRootUrl);
SPServiceContext serviceContext = SPServiceContext.GetContext(site);
UserProfileConfigManager profileConfigManager = new UserProfileConfigManager(serviceContext);
ProfilePropertyManager profilePropertyManager = profileConfigManager.ProfilePropertyManager;
CorePropertyManager corePropertyManager = profilePropertyManager.GetCoreProperties();
CoreProperty coreProperty = corePropertyManager.GetPropertyByName("ZipCode");
if (coreProperty != null)
Also you can try to create your custom property in code behind:
http://www.sharemuch.com/2010/03/30/how-to-create-custom-sharepoint-2010-user-profile-properties-programatically/
Hope this can help.
If this helped you resolve your issue, please mark it Answered

Address Book: edit custom field labels

Is there a way to edit/delete custom field labels one created earlier. Where are the entries of custom defined field labels saved?
Thank you for any feedback

Thank you for your replies,
I understand that deselecting the custom label will make it disappear from the card but not from the list which is somewhere kept (on my iPhone I can see this list when applying a custom label). Also, when trying to re-use a custom label (on Address Book) there seems to be no option for choosing the ones used already.
Therefor I cannot edit a custom label rather than add a new one (even if it is the same); that makes the list on my iphone from which I can select a custom label every time larger as unused ones do not disappear - I am correct?

How to manage Customer Specific Labelling in SAP?

Hi there - hope you can help.
I am looking for some advice on managing Customer specific labelling in SAP.
Details:
Each product we sell gets labelled.
The labels are material and customer specific.
We currently manage labels (1/ Label Codes and 2/ Label Stock) in an excel spreadsheet - but I am hoping to incorporate it into SAP.
Looking at the CMIR, I can list the label code in the Customer Description field or in the Search Term field (customer material is already used) - but this doesn't feel correct and would only solve part of the issue.
Other companies may have a similar requirement - so my question is, how can I manage the customer / material specific labelling in SAP (both codes
and stock)?
Many thanks
Mada

If EHS is integrated at your clients' place, then I think, you can achieve this requirement as per the below documentation
Customer-Specific Label - Product Safety (EHS-SAF) - SAP Library
G. Lakshmipathi

Lightroom 5.7. How to create custom color labels.

I would like to create custom color labels. I have created names for five colors, but the "custom" color (white) does not appear to be customisable
Any ideas? Ideally I would like two more color labels.

There are two versions of LR, a cloud-licensed version and a serial-number-licensed version.
It sounds like you’ve installed the cloud one which Adobe makes very easy to do, hoping you’ll signup for the cloud.
Assuming you have a serial-number from your purchase, you should uninstall the cloud-licensed LR trial, and then install the serial-number-licensed version from the Adobe Updates page and input the serial number:
http://www.adobe.com/downloads/updates

With my iphone 6 with ios8 I need a new way to create custom contact labels via Apple or app

How can I create custom contact labels on my iphone 6 using ios 8?

I assume you mean in contacts you want to add a custom label, not print a label as FoxFifth suggested!
Todo this click edit on the contact, then click the name of the field you wish to rename (there should be a red circle with a minus beside it)
A list comes up and at the bottom you can click "Add Custom Label" and type in the name.
Please note this doesn't work with Exchange servers

Publishing Dashboard into bw -- All labels in spreadsheet gone

Hi experts,
during publishing the xcelsius dashboard into the NW Environment, the SWF generation stops without any error message. Sometimes the message "Publish failed" appears (contains no error ID).
After that, ALL labels in the spreadsheet are gone. Instead of the labels the cells only contain ' #VALUE '.
The dashboard is useless then.
I can work hours with this dashboard and publish it a couple of times. Everything is fine and works as designed. But then, whyever, it deletes the labels. It happened three times, very frustrating.
Xcelsius Enterprise SP3.3
Connectiontype: SAP NW BW-Connection
Win XP & Office 2007 with latest patches
flash 10,1,85,3
Does anyone know about this issue and how to fix it?
Best regards,
Dennis

Hi David,
Thank you very much for sharing this information.
Our connections are BICS only, not via BOE. However, you are dead-on with the size of the dashboard. It is very big, with a lot of cells (20'000+), and lookups, and xTree components.
We sometimes have the "publish failed" message, and it could well be related to the corruption error.
We have had the issue also with one smaller dashboard, though.
SAP has advised to clear the portal cache (to remove possible inconsistencies in meta data), and to upgrade to Xcelsius 3.4.
We cleared the cache, but the corrupted dashboard did of course not come back.
We are currently running 3.1, and as we do not have a package for 3.4 yet (we are in a centrally maintained environment), we would like to avoid manual upgrades. For two days, the issue has not occured. We will keep an eye on it, and upgrade if the error returns. I will keep you posted.
Cheers
Frank

Custom Axis Labeling

Is there an easy way of custom axis labeling? I saw a LabVIEW application that was labeling frequency on a logarithmic scale like:
10Hz, 100Hz, 1kHz, 10kHz, 100kHz, 1MHz, 10MHz
instead of:
10, 100, 1000, 10000, 100000, 1000000, 10000000
Can this be done with the .NET version?
Thanks in advance!
Derek

It sounds like you're looking for engineering formatting with SI units. There is no direct support for this in the Measurement Studio 7.0 version of the graph, but you could get the desired appearance in the axis by setting the axis.MajorDivisions.LabelVisible, axis.MajorDivisions.TickVisible, and axis.MinorDivisions.TickVisible properties to false, then adding custom divisions to the axis.CustomDivisions collection with the appropriate values and labels. This could be done at design-time, but here's some sample code that demonstrates how to do this at run-time:
class MyForm : Form
private NationalInstruments.UI.WindowsForms.WaveformGraph waveformGraph1;
private NationalInstruments.UI.XAxis xAxis1;
private NationalInstruments.UI.YAxis y
Axis1;
private NationalInstruments.UI.WaveformPlot waveformPlot1;
protected override void OnLoad(EventArgs e)
base.OnLoad(e);
xAxis1.MajorDivisions.LabelVisible = false;
xAxis1.MajorDivisions.TickVisible = false;
xAxis1.MinorDivisions.TickVisible = false;
xAxis1.Range = new Range(10, 10000000);
xAxis1.ScaleType = ScaleType.Logarithmic;
xAxis1.CustomDivisions.Add(new AxisCustomDivision(10, "10Hz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(100, "100Hz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(1000, "1kHz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(10000, "10kHz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(100000, "100kHz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(1000000, "1MHz"));
xAxis1.CustomDivisions.Add(new AxisCustomDivision(10000000, "10MHz"));
// Axis should now appe
ar as specified once the form loads.
- Elton

How do you delete a custom email label?

So I created a custom email label for one of my contacts, and now I don't want it anymore. How do I get rid of it?

users/yourname/library/application support/iwork/numbers/templates/my templates
If using Lion or Mountain Lion...
in Finder, hold down the Option key while clicking on the Go menu and your users Library will appear...

Custom Phone Labels

Hi,
I'm probably mistaken about this ... getting confused between the Mac and the iPhone, but I thought that previously created Custom phone labels were available to choose from a pop-up list, when making a new contact or editing an existing contact. They are on the iPhone.
Is it my imagination that they have disappeared from Address Book? Is this a MobileMe issue? (I am syncing iPhone via MobileMe).
Also ... any Custom Label added to the Template, is only available to new contact cards, not existing ones. Bug?
Grant

From my recollection, what you describe is how it has always been. However, with Snow Leopard, everything was rewritten and some things do not work as they did in Leopard. Apparently, you used to be able to set the label order in the Template in the Leopard version. Now, in the SL version, it is always 'work' first.

Custom column in a list view web part for a multilingual site does not take on custom language labels. Stays in default language.

Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.

Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1.   Create the variants in the Site Ccollection
2.   Create the library outside of the variants.
3.   Add all the columns you require for the library. It is very important all the columns are there before you move on.
4.   Create a French and English view.
5.   Create the list view web part via designer.
6.   Add the list view web part to each site selecting the appropriate view to use.
7.      Edit the page in SharePoint Designer 2010.
8.      Place cursor in the column you wish to modify.
9.      Click Design in the List View Tools on the ribbon.
10.     Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11.     You are looking for a piece that resembles the following:
        <xsl:with-param name="fieldtitle">
          <xsl:value-of select="@DisplayName"/>
        </xsl:with-param>
12.      Modify it by typing in the actual column name you want. You should end up with something like this:
        <xsl:with-param name="fieldtitle">
          New Column Name.
        </xsl:with-param>
13.      Now, for this page only, the column will be renamed.
There are some caveats:
1.   Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2.   If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had.

Custom data labels in Crystal Reports charts

Hi,
I have a problem with charts in Crystal Reports. The notation prescribe e.g. that positive values appears a plus (+21) and negative values a minus (-21).
The problem is, that I canu2019t assign custom values to the data labels (e.g. the value is 20 but I want to show +20 or 18 or something else).
Furthermore, its a problem that I can't scaling depending on a formula field. This is required that all charts in the report have the same scale and are dynamically depending on the values in the report.
I need a solution to both problems, or a workaround.
Thanks in advance
Kevin

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

[ER] Custom "All" label in af:selectManyChoice /

Similar Messages

Maybe you are looking for