ERecruiting: Issue with adding a new recruiter to userlist for support team

I am trying  to add a new recruiter to the user list in Development environment , so that it can be transported to Production. The new user  has been created in eRecruting Development box and has RCF_CAND_INT assigned to the id. When I try to add  the id in " create user list" in SPRO, Iam getting an error ' no candidate cound be found for that id" (cl_hrrcf_candidate=>get failed
). What step am I missing here. Any help would be greatly appreciated.

Can you tell if the drives are at least spinning, so you know that at least they're getting power?
As a test, you could want to try the bay currently occupied by the boot drive. You know that bay is working, so if the new drive doesn't work there either - you'll have to boot the system from the Mac OS X installer disk, of course - then it would have to be something with the drives you're using, as unlikely as that sounds.
That's all I can think of. Perhaps someone else here (Hatter, for instance) will be able to offer additional suggestions.
Message was edited by: Dave Sawyer

Similar Messages

  • Issue with adding a new value to the Default Login Page

    Hopefully this is an easy one guys, I've added a select list item to the standard login page (P101) to allow the user to select a DOMAIN as well as entering their username and password.
    When the next page is displayed and I try to retrieve the value held in the new field it has been cleared, but the values entered into items
    P101_USERNAME and P101_PASSWORD are still present.
    I can't figure out why the values held in items P101_USERNAME and P101_PASSWORD are still present but P101_DOMAIN has been cleared.
    I've tried creating a value on page zero and writing the domain value to it using pl/sql and javascript but as soon as the next page is requested the value is cleared.
    Any Ideas how to get around this????
    Thanks in advance

    I suppose your login page contains a process like this:
    BEGIN
       wwv_flow_custom_auth_std.login (p_uname           => v ('P101_USERNAME'),
                                       p_password        => :p101_password,
                                       p_session_id      => v ('APP_SESSION'),
                                       p_flow_page       => :app_id || ':1'
       :t_random_number := :p101_random_number; /* this is something I added to my code */
    END;Now, if you go to this page:
    http://apex.oracle.com/pls/otn/f?p=31517:1
    please note the random number assigned to you. Once you login, the same number will appear on the page 1 (near to the top).
    So, that is how you could solve your problem.
       :t_random_numberis an application item.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • Issue with adding a new HD for MacPro G5

    I currently have a MacPro G% that is connected to a network. I have tried to install a seagate barracuda 1TB HD as a storage drive. The G5 does not see the drive. DU does not see the drive. Is there a jumper/setting/something that I am missing in the installation other than sliding it into the bay and powering up?

    Can you tell if the drives are at least spinning, so you know that at least they're getting power?
    As a test, you could want to try the bay currently occupied by the boot drive. You know that bay is working, so if the new drive doesn't work there either - you'll have to boot the system from the Mac OS X installer disk, of course - then it would have to be something with the drives you're using, as unlikely as that sounds.
    That's all I can think of. Perhaps someone else here (Hatter, for instance) will be able to offer additional suggestions.
    Message was edited by: Dave Sawyer

  • I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

    I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

    Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
    I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
    So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
    http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

  • I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

    I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

    Wifi:  my Cell phone will remember 10 wifi connections.  So delete any you don't use often and your home wifi and try to enter home wifi again.
    if it still won't connect to home wifi, call your internet provider for help.  You may need a newer router or different settings Or upgraded service.   Your phone seeks the best connection and will refuse lesser connections.
    last resort.  Backup the phone.  Do a full reset, then restore as new with the backup.
    if still not fixed, go back to apple and insist on repair or replacement.
    HOWEVER.   voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

  • Compatibilityy issue with windows XP and windows 8.1 for adobe photoshop elements 4.0

    Compatibility issue with windows XP and windows 8.1 for adobe photoshop elements 4.0?comcom

    You are going to have to contact Adobe on this one. We are other users.
    Sounds like it's not even an Apple question? Not sure.
    But the Adobe program changed, nothing changed in iTunes, right?

  • Can I update or fix the hardware issue with my iPad instead of a usb  for my 2007 MacBook Pro

    Can I update or fix the hardware issue with my iPad instead of a usb  for my 2007 MacBook Pro

    Have no idea what you are asking about. What hardware issue? What does a USB and a 2007 MacBook Pro have to do with it?
    GB

  • Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

    Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

    That's because part of iOS7 had code in it to look for and recognize unsigned cables.
    In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

  • Error in eRecruitment configuration step Define user list for support teams

    Hi Erecruitment experts,
    I am new to SAP Erecruitment and trying to get the system running in ERP 6.00 with EP7.
    When I progress the customising steps under technical settings -->User administration --> Define user list for support teams, I am facing problem of ABAP Dump.
    It says
    Error in the ABAP Application Program
    The current ABAP program "SAPLHR_RCF_CUST_01" had to be terminated because it
    has come across a statement that unfortunately cannot be executed.
    Key words are
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLHR_RCF_CUST_01" or "RCF_CUST_F01"
    "CHECK_VALID_USR"
    I think there is a link between Object types CP, BP and relation ships A650, A209 etc in this process.
    Can some one guide me how to overcome this error.
    Tks
    Dhina

    Hi all
    I got them fixed, as they are due to BP creation integration issue.
    Thanks and regards
    Dhina

  • Multiple Issues with iTunes on New iMac

    Hello Apple Community,
    I recently bought a 27" iMac with 3.1Ghz i5 processor running on Snow Leopard and finally set it up.  I have owned many Macs in the past and currently have been using a 5 year old 15" MacBook Pro on Snow Leopard that has been running flawlessly but I needed something with a bit more processing power.  When I first took my iMac out of the box I went ahead and used the Migration Assistant to move my applications and files over from my MacBook Pro but after multiple attempts I had to stop and simply move the music, document, and photo data on to a portable hard drive while I got the Migration Assistant to move the applications.  I simply moved the old iTunes music folder over to my new iMac and replaced the iTunes folder on my iMac.  The new iMac has already been authorized through my iTunes account and the music will play.  Now here are my current issues.
    When I play a song on iTunes, there appears to be a random amount of fade-in and/or crossfade when I switch playing songs.  I have checked the playback preferences and crossfade is not checked.  Some songs the crossfade will take a second while sometimes it will be as much as 10 seconds of crossfade.  On my MacBook with the identical library and settings, it does not have these issues.
    The other issue I have been experiencing is if iTunes has been open and my computer sits for a little while (usually after awaking from sleep or even listening to a few songs without touching the keyboard, the songs will stop playing on their own and when I press the play button, it begins to "play" the track but there is no sound coming from iTunes.  I have checked the volume slider in iTunes and it is still at max volume while all other applications still work and output sound.  iTunes will only work properly if I close it and re-open it.
    The final issue is similar to the last one in that when I try and play previews in the iTunes Music store it will not play but when I hit the play button iTunes will then appear to be "playing" but no sound from either the store or any of my songs from the Library.
    iTunes works perfectly fine on my MacBook Pro and it does have any of these issues.  Both Macs are currently running iTunes 10.4.1.  All songs in each library are checked and will play to a degree.
    I have deleted iTunes and all corresponding library files, (basically anything with iTunes in the name) and tried to reinstall iTunes and used multiple methods to replace the music files including using Home Sharing, a portable Hard Drive, and dragging and dropping the music files from the shared folder and no matter what I try, I still cannot get iTunes on my iMac to work properly.  I have been searching around the support forums for others who might have had this issue but I cannot seem to find much.  Any help would be greatly appreciated!

    I had not tried that before, but from your suggestion, I went ahead and did it and it seems to have gotten rid of the crossfade issues I was experiencing but whenever I try and listen to a preview in the iTunes music store it still does not appear to be working.  Also, I was testing a number of tracks and it seems like there are a few tracks in particular that will make iTunes stop playing when I click on them and then if I attempt to play something else, iTunes says it is playing but no sound is coming from it. 
    What I have found that is interesting is the first time I ran the Disk Utility it repaired a HUGE number of misc. files.  After running it and still experiencing problems I tried to run it again but this time the files were not as numerous and were all within the /Library/CoreServices menu.  Each subsequent time I ran the Disk Utility and rebooted, I tried to run the Disk Utility again and the same files seem to still be having the same issues.  This is just an example of one of the files I have been having an issue with.
    Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" , should be drwxr-xr-x , they are -rwxr-xr-x .
    Repaired "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib" .
    One in particular gave me a Warning and said it could not be repaired.  I'm not sure if it is important to repair but I still seem to be having some issues here and there.  Here is the message from the Disk Utility regarding the file in question.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.

  • Issue with creating a new line in Glossary widget

    I'm using Captivate 6 and have an issue with trying to display text on a new line in the description field of the Glossary widget. In playback, a carriage return displays as \n
    I read in another discussion (from early last year), that this issue had been resolved and that the fix would be shared soon on the captivate blog for non-subscription users. Does anyone know if the fix has been shared yet - I can't find it anywhere?
    Thanks for any help you can provide.
    Tenneil

    Hi Tenneil,
    Greetings from Adobe.
    Please click on the below link and download the updated Glosarry Interaction.
    https://files.acrobat.com/a/preview/0a17bb28-049e-4ac7-b8f7-dbdacef5e91c
    Extract the zip file to your desktop.
    Copy "08_Glossary.wdgt" from the extracted zip file.
    Go to : C:\Program Files (x86)\Adobe\Adobe Captivate 6 (32 Bit)\Gallery\Interactions (For 32 bit Captivate) or C:\Program Files\Adobe\Adobe Captivate 6 (64 Bit)\Gallery\Interactions (For 64 bit Captivate).
    Replace the glossary widget in the interaction folder. Restart Captivate 6. (Make sure that you take the backup of the original Glosarry Widget)
    Apply the widget again and check for the issue.
    Let me know if it works for you.
    Regards,
    Mayank

  • Logical standby issue after adding a new user at production db server

    Hello Experts,
    I am facing a issue related to logical standby db server where after adding a new user at production db server logical standby has stopped sql apply. Can anybody give some idea to find out the root cause and give some tips to resolve the issue.
    tried below .....
    SELECT EVENT_TIME, STATUS, EVENT FROM DBA_LOGSTDBY_EVENTS
    ORDER BY EVENT_TIMESTAMP, COMMIT_SCN, CURRENT_SCN;
    got error
    ORA-16227: DDL skipped due to missing object
    ORA-01403: no data found
    ORA-00942: table or view does not exist
    OS : RHEL 4 (IBM P5)
    DB : Oracle 10g (10.2.0.1)
    Achyot

    Please let me know if can skip the DDL at which it is failing.
    ALTER DATABASE STOP LOGICAL STANDBY APPLY;
    Use EXECUTE DBMS_LOGSTDBY.SKIP
    ALTER DATABASE START LOGICAL STANDBY APPLY;
    Thanks,
    Renu

  • SQL Server Transacational Replication Issue while adding a new article

    I have a "PULL" transaction replication toplogy (SQL server 2008 R2 - publisher,subscriber & distributor) in place and is working fie. I added a new article (table) using sp_addarticle and it works fine. Then I tried to add subscription
    to the new article using sp_adddsubscrition SPROC from the publisher (details below)
    EXEC sp_addsubscription @publication = @pub_name, @article = @article_name, @subscriber = @sub_server, @destination_db   
    = @sub_dbname, @subscription_type = N'pull',@update_mode = N'read only', @sync_type = 'sutomatic', @status = 'active', 
    @reserved ='Internal'
    I tried with all combination of values in the @sync_type parametr,
    The above command fails with the following message:
    Msg 14100, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 533;
    Specify all articles when subscribing to a publication using concurrent snapshot processing.
    The sync_type value parameter is "replication support type" when the subscrition was added orginally to the publication. This trsnslates into a value of 3 (CONCURRENT)  in sync_method
    column on the outpout of sp_helppublication SP execution.
    What am I doing wrong? Please advise. Your help is much appreciated.
    Thanks in advance
    Kirti

    Thanks for your reposne, Mr. Cottr.
    It was a type-oin the value for @sync_type parameter in the sp_addsubscription call when I posted this article originally. It was actually set to "automatic".  I have posted the scripts per your request. These scripts are executed in SQLCMD mode in
    SSMS query qindow. Since this is a PULL subscription, thre is another script for pP-addpullsubscription that is not incldued in this post. If you need that also, I will be glald to post that also. Thanks again for your help.
    -->>>>>sp_addpublication:
    USE [master]
    GO
                           SQL Server Transactional Replication Related Scripts
    Function: Configuring publication on the database at the publisher
    -- TO DO: Parameters to set before executing this TSQL batch script
    :SETVAR pub_dbname                TestDB
    :SETvar pub_name                  TestDB-TranPub01
    :SETVAR distributor               DISTRIBSVR
    :SETVAR repl_admin_account        <domain>\<account_name>
                                       --replication admin account for non-prod environment
    :SETVAR repl_admin_password       <pwd>
                                       --password for replication admin account
    USE [$(pub_dbname)]
    SET NOCOUNT ON
    IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
    BEGIN
       RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
       RETURN
    END
    DECLARE @dynsql                        sysname
           ,@repl_ddl                      int
           ,@allow_initialize_from_backup  varchar(5)
    SET @repl_ddl                     = 1       -- preferred value is 0 (replication of DDL statements prohibited; manually enabled
    when needed only)
    SET @allow_initialize_from_backup = 'true'  -- preferred /do not change this value
    -- Adding the transactional publication
    DECLARE @desc     varchar(255)
    SET @desc = 'Transactional replication of database ' + QUOTENAME('$(pub_dbname)') +
                ' from publisher ' + QUOTENAME(@@servername) + '; Publication: ' + QUOTENAME('$(pub_name)')
    PRINT '1. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
    EXEC sp_addpublication
         @publication                  = '$(pub_name)',
         @description                  = @desc,
         @retention                    = 0,
         @add_to_active_directory      = N'false',
         @allow_push                   = N'false',      -- push subscription disabled
         @allow_pull                   = N'true',       -- pull subscription enabled
         @allow_anonymous              = N'false',   
         @allow_sync_tran              = N'false',
         @allow_queued_tran            = N'false',
         @allow_dts                    = N'false',
         @allow_initialize_from_backup = @allow_initialize_from_backup,
         @allow_subscription_copy      = N'false',
         @compress_snapshot            = N'false',
         @enabled_for_internet         = N'false',    
         @enabled_for_p2p              = N'false',
         @independent_agent            = N'true',
         @immediate_sync               = N'false',     
         @repl_freq                    = N'continuous',
         @replicate_ddl                = @repl_ddl,
         @snapshot_in_defaultfolder    = N'true',
         @status                       = N'inactive',   -- initialy publication is inactive / activated later after articles
    are added to the pblication
         @sync_method                  = N'concurrent'  -- preferred
    IF @@ERROR <> 0 RETURN
    PRINT '2. Configureing publication ' + QUOTENAME('$(pub_name)') + ' on database ' + QUOTENAME('$(pub_dbname)') + ' ...'
    EXEC sp_addpublication_snapshot
          @publication                 = '$(pub_name)',
          @frequency_type              = 1,
          @frequency_interval          = 1,
          @frequency_relative_interval = 1,
          @frequency_recurrence_factor = 0,
          @frequency_subday            = 8,
          @frequency_subday_interval   = 1,
          @active_start_time_of_day    = 0,
          @active_end_time_of_day      = 235959,
          @active_start_date           = 0,
          @active_end_date             = 0,
          @job_login                   = '$(repl_admin_account)',
          @job_password                = '$(repl_admin_password)',
          @publisher_security_mode     = 1,             --Windows authentiction
          @publisher_login             = '$(repl_admin_account)',
          @publisher_password          = '$(repl_admin_password)'
    IF @@ERROR <> 0 RETURN
    PRINT 'Executing sp_helppublication for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
    EXEC sp_helppublication @publication = '$(pub_name)'
    PRINT 'Executing sp_helppublication_snapshot for ' + QUOTENAME('$(pub_dbname)') + '.' + QUOTENAME('$(pub_name)') + ' ...'
    EXEC sp_helppublication_snapshot @publication = '$(pub_name)'
    --->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    -->>>>sp_addsubscription
    USE [master]
    GO
                           SQL Server Transactional Replication Related Scripts
    Function: Register the (pull) subscription at the subscriber
    -- TO DO: Parameters to set before executing this TSQL batch script
    :SETVAR publisher_dbname          TestDB
    :SETvar publication_name          TestDB-TranPub01
    :SETVAR subs_server               SUBSVR
    :SETVAR subs_dbname               TestDB
    :SETVAR distributor               DISTRIBSVR
    :SETVAR repl_admin_account        <domain>\<account_name
                                      --replication admin account for non-prod environment
    :SETVAR repl_admin_password      <pwd>
                                      --password for replication admin account
    USE [$(publisher_dbname)]
    SET NOCOUNT ON
    IF db_name() IN ('master', 'model', 'msdb', 'tempdb', 'distribution', 'DBA')
    BEGIN
       RAISERROR('Please set the user database name properly and rerun the script', 15, 100)
       RETURN
    END
    DECLARE @dynsql                        sysname
           ,@distibutor                    sysname
           ,@subscriber                    sysname
           ,@pub_dbname                    sysname
           ,@pub_name                      sysname
           ,@pub_login                     sysname
           ,@pub_password                  sysname
           ,@dest_dbname                   sysname
           ,@job_login                     sysname
           ,@job_password                  sysname
           ,@repl_ddl                      int
           ,@allow_initialize_from_backup  varchar(5)
    SET @pub_dbname                   = '$(publisher_dbname)'
    SET @pub_name                     = '$(publication_name)'
    SET @subscriber                   = '$(subs_server)'
    SET @dest_dbname                  = '$(subs_dbname)'
    SET @distibutor                   = '$(distributor)'
    SET @job_login                    = '$(repl_admin_account)'  
                                         -- used by replication agents to connect
    to publisher for queued updating subscriptions
                                         -- make sure account has DBO access on subscriber
    db
    SET @job_password                 = '$(repl_admin_password)'
    PRINT '1. Adding subscriber for pull subsctiption of publication ' + QUOTENAME(@pub_name) + ' on database ' + QUOTENAME(@pub_dbname) + ' ...'
    EXEC sp_addsubscription
         @publication       = @pub_name,
         @article           = 'all',
         @subscriber        = @subscriber,
         @destination_db    = @dest_dbname,
         @subscription_type = N'pull',
         @update_mode       = N'read only',
         @sync_type         = 'replication support only',
         @status            = 'active'
    IF @@ERROR <> 0 RETURN
    Execute sp_helpsubscription @publication = 'FTBTrade_TEST-TranPub01'
    --@pub_name

  • Facing issue with adding systems in SMSY - solution manager

    Hi all,
        We are facing an issue with the solution manager in tcode smsy. When i create a system in the corresponding component say ECC with product version ECC6.0.The next screen shows that the <SID> has been added successfully. But when i navigate to the path and i unable to see the system SID which i have created.
       Again i have tried to create the same system with same SID, but it shows that " SID already exists "
       Also i need another suggestion, we have planned to add 60 systems in the same solution manager. Kindly suggest me , how many systems we can add in single solution manager in maximum and for configuring EWA ?
    Thanks
    Raj

    Hi Raj,
    You can delete the old system entry and then try creating the saem again..
    Also while creating mention correct product and version and the installation number.
    You can also use the assistant for this.
    Have you added all your servers and DB?
    regards,
    Raja. G
    Edited by: Raja Gunasekaran on Aug 28, 2009 1:26 PM

  • Sudden banding issue with Mac and new Canon printer, already called tech

    Good morning fellow Elementites.
    I have been using Photoshop Elements 12 on my MacBook Pro 13 inch, running Maverick OS, printing to HP Photosmart Premium all-in one with no banding issues, ever.
    I did want to upgrade my printer and monitor so I purchased the Canon Pixma Pro 100 and a new external LG IPS monitor to view the PSE program.
    I also purchased ColorMunki Display to calibrate the monitor. Everything is operational with the recommended settings for color etc.
    I printed a .tiff image and a .jpg through the PSE print function. The images that looked perfect on the new monitor and Macbook monitor printed with banding. I called Canon tech support. The man had me perform a few tasks to make sure the printer was operating correctly. We printed test sheets from the printer and they were all as they should be.
    He the said he NEVER prints from PSE. He edits in PSE but prints using Canon's EZ share or print or whatever it's called, doesn't matter cause I do NOT LIKE IT AT ALL. Not to mention it is just another step in the work flow. Not to mention that I paid good money for a photo editing program of high quality and I want to use ALL the features.
    He said the problem isn't the printer but the printing software instructions TO the printer via the Mac OS printer system, or something like this is what he said. He also had me download some other updates and driver files. He then had me remove the printer from my printer list and then add it back.
    He then had me print the .jpg image, (it only prints .jpg which is annoying as heck,) and it came out SO BEAUTIFUL I ALMOST CRIED
    I want to print this quality THROUGH PSE. Does anyone have a clue as to what to do to resolve the issue?  None of the suggestions in other threads from the past seem appropriate enough.
    Eager to hear,
    Regards.

    I have returned home and have copied down all the settings so that I may post them here before I do any more fiddling.  Maybe something glaring will be spotted before I start changing things.
    I opened an image in PSE 12.
    I chose from the PSE menu at the top of the monitor, FILE >PRINT
    A window appears with my photo and boxes and such: 1. Select Printer> CANON PRO 100-SERIES (The other printer isn't concern now).
    Select Paper Size and Orientation, no problems with this or any of the other settings in this window.
    I then select MORE OPTIONS button at bottom of window.
    Another window opens.
    There are 3 options listed on the left hand side PRINTING CHOICES which it is automatically on, CUSTOM PRINT SIZE which I haven't needed yet, and COLOR MANAGEMENT.
    I select COLOR MANAGEMENT.
    COLOR HANDLING is set to PRINTER MANAGES COLOR.
    IMAGE SPACE is listed, not in any box, as sRGB IEC61966-2.1
    PRINTER PROFILE is listed in a box that is grayed out and not selectable, as CANON IJ COLOR PRINTE...
    RENDERING INTENT is set in a selectable box as RELATIVE COLORMETRIC.
    (There is a little mssg below all this that reminds me to remember to enable color management in the printer preferences dialog.  I was never able to find this action and after doing some research I read that this mssg is a boo boo as the function is automatic in MAC running Maverick, supposedly).
    I then click OK and the box goes away.
    I then click the PAGE SET UP button.
    A window titled PRINT opens.
    The Printer selection box says CANON PRO=100 series.
    The next box always confuses me because nothing in the list appears to pertain to me when I want to print my photos.  It is the Presets box.
    I believe FAST PRINTING ON PLAIN PAPER is always showing when I open this window.  But I don't want that so I always look to see if there is something I should choose that applies.  I don't know what they mean by DEFAULT SETTINGS in this case.  LAST USED SETTINGS would be ok if that was what I wanted each time I printed.  FAST and FINE on Plain Paper?  I have been assuming they mean plain copy paper so I don't choose that.  SAVE CURRENT SETTINGS AS PRESET, I don't choose that because I haven't been sure of the settings.  And the SHOW PRESETS does me no good becuase you can't change anything in there.
    PAPER SIZE, not an issue at the moment.
    LAYOUT button is my next stop, by now I am exhausted
    I look at COLOR MATCHING which shows CANON COLOR MATCHING as the selected method.  (The other choice is COLOR SYNC but I don't know anything about that one and haven't been told to change it.)
    PAPER HANDLING & COVER PAGE, N/A at this time.
    QUALITY & MEDIUM.  I choose my paper type, paper source, print quality which for my photos I select HIGH.  I don't touch COLOR OPTIONS because that is scary looking.  And BORDER and MARGIN I have no issue with.
    I then hit SAVE and the window closes.
    Then I select PRINT in the lower right of the window that has my photo in it and from which I acessed all these other things.
    Phew.  So, can anyone tell me if they see anything wrong here, PLEASE.
    Regards,
    P.

Maybe you are looking for