ERPI: how to set up drill through from Planning to EBS

Hi,
When you guys know how to set up drill through from Planning to EBS through ERPI ??
I encountered the following message when I tried to drill :
no drill through reports found at this location
I think I didn't set up the drill through functionality properly.
Regards,
Eddy

Can you check the log file for any errors? Also, check if the drill regions are created in the application. You can navigate to process details in ERPI and select the show log link for the corresponding process id. That should indicate if the drill regions were created on the target.
Thanks,
Bala

Similar Messages

How Enabling ERP Integrator Drill Through from a Grid

Hi All,
Can any one tell me how to see the source data by using FR.
some where i saw we can see this by using Enabling ERP Integrator Drill Through from a Grid.
but i dont know how to set this...
can any one help on this...

Incidentally we had been trying to use Essbase studio as an option.But there are 2 oints that we are trying to investigate.
1) Can we bypass deployment of data and metadata everytime through Essbase studio after the initial outline is delpoyed? In the system architecture the relational tables are populated using ODI. We would like to load the data and metadata through ODI into the cube. Eeven then can we implement drill thru bypassing deployment through Essbase Studio?
2) If Essbase studio is imperative for drill through then what are the batch automation options for deployment through Essbase studio? Ideally the option should be after the relational tables are populated through ODI then the Essbase deployment should be invoked and batch script should load the data and metadata through Essbase Studio.
Please advise.
Thanks,
Anirban

Drill through from Planning to FDM 11.1.2 Not working

Hi,
I have FDM with Essbase adapter installed, version 11.1.2.0.0.
And i have FDM application configured to load data from files to essbase. When in Planning form i am clicking 'drill through' icon on cell with loaded data it opens new window with error:
Error: No locations were found matching the passed intersection values. Please verify:
1) that the target system (originating the drill through) is properly configured;
2) that FDM POVs have not been retroactively modified or compromised.
In the FDM error log the following record:
ERROR:
Code............................................. 7123
Description...................................... INSERSECTION SQL DEBUG
Procedure........................................ SELECT vDataFact.PartitionKey, PartName, CatName, CatTarget, PeriodKey, PeriodDesc, DataView, AccountX, EntityX, ICPX, UD1X, UD2X, UD3X, UD4X, UD5X, UD6X, UD7X, UD8X, UD9X, UD10X, UD11X, UD12X, UD13X, UD14X, UD15X, UD16X, UD17X, UD18X, UD19X, UD20X, SUM(DECODE(ChangeSign, 0, (Amount), 1, (Amount *-1), (Amount))) AS Amt From vDataFact Where (((CatTarget) = N'EXP.011201PDV.BDRS.BUDGET') And ((PeriodTargetM) = N'Jan') And ((YearTarget) = N'FY10') And ((CalcAcctType) > 0) And ((AccountX) = N'EXP.011201') And ((EntityX) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NAAC.3200EN.GD') And ((ICPX IS NULL) or (ICPX = N'') or (upper(ICPX) = N'[ICP NONE]')) And ((upper(UD1X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NA') And ((upper(UD2X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACTEXT.KNT.NAAC.3200') And ((upper(UD3X)) = N'EXP.011201PDV.BDR') And ((upper(UD4X)) = N'EXP.011201PDV.BDRS.BUDGETV.FACT') (and so on...)
And we can see that (CatTarget) = N'EXP.011201PDV.BDRS.BUDGET' consist of three joined together elements from three different dimension EXP.011201(account) and PDV.BDR(custom3) and S.BUDGET(scenario).
With other custom dimensions in this select statement - the same error, in front of correct element - string with other joined elements.
Can anybody help me to understand why i have this error in drill through?
FDM error or Oracle RDBMS errors or Planning with Essbase? Something wrong with locale setting may be, with "," or "." delimiter somewhere in the settings?

Hi there
Are you using member aliases or names? I had problems with aliases in excel not allowing drill through. not sure if this is fixed in 11.1.2
Are you trying to drill through from a level 0 intersection?
Simon

Drill-Through from Planning in 9.3.1

Hi All,
We are on 9.3.1 and want to implement drill-through capabilities from Planning. We are building our dimensions in DRM and through HAL uploading it in Planning. We are not using EIS. Can someone guide me anyway to implement this. We don't mind using EIS but I have read in some forum that you can do this bypassing EIS but not sure how to implement it.
Can anyone please guide me. Thanks in advance...

I really wanted it to be from Planning web forms but if it is possible with SmartView I can take a look at it. Custom VBScript would be a real pain as we don't have that kind of resources so have to give this functionality using what we have.
I found some documents which talk about this process from Planning web but couldn't really figure out what needs to be done. The docs are below:
1. http://ranzal.wordpress.com/2009/01/08/adding-drill-through-to-your-hyperion-implementation/
2. http://ranzal.wordpress.com/2009/06/23/adding-drill-through-to-your-hyperion-implementation-%E2%80%93-part-2/
3. http://mi-oaug.org/Presentations09/Workarounds%20for%20What%20the%20Essbase%20Developers%20Forgot%20MIOAUG%283%29.pdf
(This one uses System 11 Studio to some extent... see page 54)

Drill through from Planning to Oracle

Hello,
Quick question: If I load data into Hyperion Planning using ODI, will I be able to drill through to the source which is an Oracle database ? If not, what do I need to be able to do the drill through ?

I might run into an issue with that: My infrastructure uses single sign-on (using OAM). FDM does not support single sign-on according to the platform matrix. But it apparently does support it for HFM applications. Single sign-on is also a Connection Option, according to the DBAG for FDM. (which really confuses me: Why does the platform matrix say SSO not supported but then it does work with HFM and it is one of the connection options?
But anyway as far as I know, the above is not the case for planning. Is my understanding correct? If a user provisioned using single sign-on has accesses a data form in the planning application, is there any way he/she will be able to drill through to the source Oracle 10g/11g database? Users also need to push planning and forecasting data from the planning application to the Oracle DB.
Maybe there's a workaround?
Any insight into this will be greatly appreciated as always.

How to drill through from Essbase to Oracle in BIEE?

How to drill through from Essbase to Oracle in BIEE?
Edited by: Aaron Zhong Zhenhua on Oct 21, 2008 11:19 AM

Physical layer:
- Create a complex join between the Essbase generation and your detail table. E.g.: Gen6,Market = ATTRIBS.CNTRY
BMM layer:
- Go to the logical table "Market" (for example) and drag the ATTRIBS.CNTRY column on to the Gen6,Market column.
- Now pull over the other attributes from your Oracle table into the Market logical table...this will result in a second LTS within the sources.
- Drag and drop the logical columns you just got from Oracle on the lowest level of the Market dimension hierarchy. In this example, onto Gen6,Market.
- Alternatively, create levels below Gen6.
- Make sure your LTS have the correct content levels set
Presentation layer:
- Pull your chagnes through to your presentation catalog(s).
Should be all.
Hth,
C.

Drill Through from FDM/ERPI to Source ERP

Per my understanding, when loading data from FDM to a Target EPM system, the drill through from say HFM back to FDM would log on using your credentials via SSO. In other words, I log in as testuser in HFM and drill through, then that testuser id and password must be set up in shared services in the same manner in the epm target system as well as FDM.
Does the same hold true when you drill through from FDM/ERPI back to the Source ERP? In other words, the same ID and password must be set up in HFM, FDM, and say EBS ERP? Or is there a way to set a Global ID for the drill from FDM to the ERP?
Thank you in advance

Hello,
In the situation you have described unless the Authentication mechanism and the style of that mechanism for all the environments (in this sitaution Hyperion vs. Oracle EBS) are identical then there is no unified approach. Generally when going from Hyperion into Oracle EBS the EBS landing page is returned prompting you for valid credentials.
In order for this to work in on seemless move you would have to use OID with OSSO.
OID = Oracle Internet Directory
OSSO = Oracle Single Sign On
Thank you,

ERPi drill through: From where to where?

Hi,
Can ERPi drill through from Essbase (I know it can from EPM, Planning, HFM, Smart view and FR).
Can ERPi drill to source other than ERP GL? If so, to where?
Thanks,
Gabriel

Yes, you can load data to Essbase with ERPi and then drill through from Essbase to ERPi and then from ERPi to the source system GL.
Within the source system registration in ERPi you will need to update the Drill URL to the EBS url for drill to function.

Error drill-through from Hyperion to Oracle GL with ERPI

Hi
I am using ERPI to load data from Oracle GL 11.5 to Hyperion PLanning 11.1.2.1.
The data are well loaded. Tje drill-through from Hyperion Planning to FDM is ok.
But whe I try to execute the drill-through from FDM to Oracle eBS, I have the following error message :
Invalid ERPI URL
Return value from erpi web service : java.lang.exception: Invalid DataKey (33487765): No record found.
ERPI Data Key value: 33487765
I have another application with the same source and the same target and the drill-through is ok.
Thanks in advance for your help
Fanny

Are you modifying the source value in any way before import into FDM? Using an import format in FDM for example?

Drill through from one query to another query

Hi experts,
Anybody knows how to do drill through from one query to another query?
Any feedback will be really apreciated.
Thanks.

The setting can be done in transaction RSBBS.
You only need to specify the sender and receiver query..
Ashish..

OBIEE 11G HOLAP( drill through) from ORACLE OLAP to Relaltional table

Hi Experts...
I have some idea that the drill through from an essbase cube to an relational cube can be possible with few limitations in OBIEE 10g. I am looking for the same feature with ORACLE OLAP option . I have OLAP cube built in 11g (leve5 - granularity to one of the dimension) , and relational has 7 levels. In OBIEE once drill down to the level 5 it has fetched data from OLAP , and going beyond to level 6 -7 then it should get the data from relational table.
Do anyone had gone through such solution, Please kndly share your inputs and documents which would be helpful.
Thanks
S

This is very easy. It's really no different from setting up OBIEE to drill from one table to another. Let's assume that you have your cube mapped in OBIEE using the OBIEE plug-in for Analytic Workspace Manager. Here is an outline of the steps:
1. Add the dimension table and fact table to the OBIEE physical layer.
2. Add the new level to the OBIEE dimension object in the business layer.
3. Add the dimension table as a new logical table source to the existing dimension table in the business layer.
4. Add the fact table as new table in the business layer.
5. Define joins in the physical and business model as appropriate.
6. Set set keys in the tables and the dimension as appropriate.
7. Set the level for the new dimension table to the appropriate level in the dimension.
Again, it's really best to just think about this as drilling from one table to another.

When drill through from FR report, navigate to FDM landing page.

Hi,
Data loaded in HFM 11.1.2.1 using FDM 11.1.2.1 and it has been replaced by ERP integrator 11.1.2.1.501. When we perform drill through from Financial reporting report it is navigating to the FDM landing page instead of ERP integrator landing page. In FDM landing page, showing the ERROR:
"Error: Error Retrieving recordset"
Anyone please help me to solve this issue.
Thanks,
Yamuna

Hi ,
My guess is that , when you loaded the data from ERPi the drill regions created by FDM have been over written. Hence you are not able to drill down to the FDM page. This happens in most of the scenarios , where if the data is loaded across an intersection using FDM and then again the data is loaded in the same intersection using some other way like Flat Files or ERPi the Drill Regions or Drill POVs get compromised.
To confirm whether your FDM drill back is working or not , create a simple form using any of the intersections from your dimensionS ( not the same ones used above ) and load a single line of data using FDM across those intersections in the form. Try drilling back to the FDM Landing Page and check. Same way , create a report for the same intersections and check drill back to FDM. Remember to check the :Drill - Through" check box in the property grid in the Grid Properties for that report.
Regards

Drill-through from Workspace not possible?

Hello everybody,
I am working on Hyperion System 9.3.1
I have a cube with some drill-through reports.
I can drill-through from Add-In Excel and WebAnalysis reports but not from Workspace.
Example: For the same WebAnalysis report
- when opened with WA Studio allows drill-through at double click in the cell;
- when opened from Workspace, at double-click in the cell the Related Content windows opens up but I can't see my drill reports. Is that normal?
Thank you in advance for your help!

In version 11.1 they added support for cube drill-through. In 9.3.1 you'll have to do it manually. Here are some ideas
- Create queries for your cube and relational data.
- Limit the result of your relational data with very specific filters to avoid enormous number of rows.
- Create your table or pivot for your cube data and add a script for cell double click.
- Set your limit based on the intersections, set the filters for your relational query and do a database process.
- Now show your relational table.
HTH,
Gerd

For Drill Through From Hyperion Workspace Forms to Oracle - EBS - Financail

Hi
i need to drill through from Hyperion Workspace Forms to Oracle - EBS- Financial.
What are approaches ?
Weather it is possible by using FDM? or ERPi adapter ?
Or it requires all Tools (FDM, ODI, ERPi ) ?
Urgent ..
Need ur help ?
regards
Sher

FDM/ODI/ERPI, but note it is feasible to load data using ERPi without FDM (but still need ODI installed) in which case it should drill back via the ERPi landing stage.
Before going any further i think you need to decide on your data flows and whether you use ERPi or ERPi / FDM to load data, and perhaps search the internet and read some documentation to understand the system, or, get some consultancy.
Edited by: user10757003 on 20-Sep-2012 09:04

How to set an Application Item from PL/SQL

I am attempting to set an Application Item
After login to my app, I want to retrieve a row from my SETTINGS table and populate some Application Items with the settings information so that I can
display some of that settings information on every page.
Just to start, I created one Application Item named F106_YEAR
I then created a Shared Components Application Process which executes on New Session: After Authentication
I created this process as an Anynomous PL/SQL block.
declare
aucyr varchar(4);
begin
select year into auctyr
from settings;
:F106_YEAR := aucyr;
end;
I've tried a couple of other Syntax tricks attempting to reference the Application Item F106_YEAR from within PL/SQL (like V('F106_YEAR') but nothing seems to be working.
I'm sure that I am missing something simple. Can someone tell me how to set an Application Item from PL/SQL?
Thanks in advance.

I'm still doing something wrong because this is not working for me.
I've tried both of the following versions as an Application Process set to run on New Session after Authentication:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
:F106_AUCTION_YEAR:=auction_year;
end;
and I also tried:
declare
auction_year varchar(4);
begin
select year into auction_year
from PBUUC.SETTINGS where rownum < 2;
APEX_UTIL.SET_SESSION_STATE (p_name, p_value);
end;
F106_YEAR is a global Item (shared components).
The select statement works just fine in SQL*PLUS so I know that it is correct.
If I run the debugger and log into the application, here is the output. Shouldn't I see my Application Process get called if it is set to run on New Session after Validation?
My Application process is named RETRIEVE_AUCTION_SETTINGS
0.01: A C C E P T: Request="P101_PASSWORD"
0.01: Metadata: Fetch application definition and shortcuts
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Fetch session state from database
0.02: ...Check session 695371898690095 owner
0.02: ...Check for session expiration:
0.02: ...Metadata: Fetch Page, Computation, Process, and Branch
0.02: Session: Fetch session header information
0.02: ...Metadata: Fetch page attributes for application 106, page 101
0.03: ...Validate item page affinity.
0.03: ...Validate hidden_protected items.
0.03: ...Check authorization security schemes
0.03: Session State: Save form items and p_arg_values
0.03: ...Session State: Save "P101_USERNAME" - saving same value: "jps"
0.03: Processing point: ON_SUBMIT_BEFORE_COMPUTATION
0.03: Branch point: BEFORE_COMPUTATION
0.03: Computation point: AFTER_SUBMIT
0.03: Tabs: Perform Branching for Tab Requests
0.03: Branch point: BEFORE_VALIDATION
0.03: Perform validations:
0.03: Branch point: BEFORE_PROCESSING
0.03: Processing point: AFTER_SUBMIT
0.03: ...Process "Set Username Cookie": PLSQL (AFTER_SUBMIT) begin owa_util.mime_header('text/html', FALSE); owa_cookie.send( name=>'LOGIN_USERNAME_COOKIE', value=>lower(:P101_USERNAME)); exception when others then null; end;
0.04: ...Process "Login": PLSQL (AFTER_SUBMIT) wwv_flow_custom_auth_std.login( P_UNAME => :P101_USERNAME, P_PASSWORD => :P101_PASSWORD, P_SESSION_ID => v('APP_SESSION'), P_FLOW_PAGE => :APP_ID||':1' );
0.06: ...Process "Clear Page(s) Cache": CLEAR_CACHE_FOR_PAGES (AFTER_SUBMIT) 101
0.06: Nulling cache for application "106" page: 101
0.00:
0.00: S H O W: application="106" page="1" workspace="" request="" session="695371898690095"
0.01: alter session set nls_language="AMERICAN"
0.01: alter session set nls_territory="AMERICA"
0.01: ...NLS: Set Decimal separator="."
0.01: ...NLS: Set NLS Group separator=","
0.01: ...NLS: Set date format="DD-MON-RR"
0.01: ...Setting session time_zone to -04:00
0.01: NLS: wwv_flow.g_flow_language_derived_from=0: wwv_flow.g_browser_language=en-us
0.01: Application 106, Authentication: CUSTOM2, Page Template: 2904114531488186
0.01: ...Session ID 695371898690095 can be used
0.01: ...Application session: 695371898690095, user=JPS
0.01: ...Determine if user "JPS" workspace "1040027630222986" can develop application "106" in workspace "1040027630222986"
0.01: ...Check for session expiration:
0.01: Session: Fetch session header information
0.01: ...Metadata: Fetch page attributes for application 106, page 1
0.01: Fetch session state from database
0.02: Branch point: BEFORE_HEADER
0.02: Fetch application meta data
0.02: Computation point: BEFORE_HEADER
0.02: Processing point: BEFORE_HEADER
0.03: Show page template header
0.03: Computation point: AFTER_HEADER
0.03: Processing point: AFTER_HEADER
0.04: Computation point: BEFORE_BOX_BODY
0.04: Processing point: BEFORE_BOX_BODY
0.04: Region: Auction_Title F106_AUCTION_YEAR

ERPI: how to set up drill through from Planning to EBS

Similar Messages

Maybe you are looking for