Err when Create MM

Hi all
I already create all in Enterprise Structure
follow:
OX15 Define Company
OKKP Define Controlling Area
OX02 Define Company Code
OBY6 - Enter Global Parameters for Company Code
OX19 - Assign Company Code to Controlling Area
OX16 - Assign Company Code to Company
OVX5 Define Sales Organization
OVX3 Assign Sales Organization to Company Code
OVXI - Define Distribution Channel
OVXK - Assign Distribution Channel to Sales Organization
OMSP - Create Divisions
OVXA - Assign Division to Sales Organization
OX08 - Create Purchasing Organization
OX01 - Assign Purchasing Organization to Company Code
OX10 Define Plant
OX18 Assign Plant to Company Code
OVX6 - Assign Sales Organization Distribution Channel to Plant
0X17 - Assign Purchasing Organization to Plant
OVXD - Define Shipping Points
OVXC - Assign Shipping Point to Plant
OX09 - Create Storage Location
but when I create MM system appear error:"The company code L4 does not exist or has not fully maintained"
Could you please help me ?
Thank and best regards,
Edited by: Cao Danh Thang on May 6, 2008 11:02 AM

Hi,
SAP help says: "Before you can make the assignments, you must maintain basic data in the controlling area: the assignment control indicator, the chart of accounts, the fiscal year variant, and the currency settings. The assignment control indicator affects the other indicator settings.
Note that this controlling area basic data sets the indicators so that the desired company codes can be assigned."
If this doesnt help, post this query in FI-CO forum.
Regards

Similar Messages

Err 00 671: SAPSQL_ARRAY_INSERT_DUPREC when creating help desk service mes.

Hi all,
we are setting up SOL MAN 4.0 SP 06, which have BBPCRM 05 SP09
I have followed the below forum, in order to implement the number range for document type SLF1 and SLFN.
Error when creating system message
(Error when creating system message)
As said in the forum you have to implement number range differenty for SLFN docs and SLF1(ABA msg).
So clearly number ranges internal for SLFN docs are external for SLF1 docs and it works in the opposite way round as well.
If I use the crmd_order trx to generate internally an SLFN doc it works,without any problem. But on the other hand if I try to use the menu Help - Create Support Message, I get the below error:
00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC.
As well BDOC have got a strange status, the yellow triangle of incompleted, and/or in process.
Should I carry out any Bdoc set up? For instance for queues?
After doing an ST05 trace I have found out that system is trying to insert twice the same key record in table CRMD_ACTIVITY_H. The program doesn't fail the first time but at the second attempt it fails.
We have checked many Sap notes, and in one case I have found out that problem was identical to the one I 'm experiencing. So we apply note 754192.
But I still have the same problem. So what am I supposed to do?
Should I raise the BBPCRM SP?
Please advice. Any help will be rewarded.
Many thanks in advance,
AndreA

Andrea,
With reference to a couple of your statements made in your posting, the SLFN and SLF1 documents are part of the overall Service Desk configuration, is there a reason that you have not progressed to the SP12 Stack? Have you gone through the IMG to activate the necessary BC Sets for enabling the Service Desk? If you have gone through all the necessary configuration, have you made any modifications or customizations to the processing of service requests to include custom actions during the execution for creation of a service desk ticket (this can include sending emails, changing SLA dates, org distribution).
Thanks for clarifing your situation for the rest of us and the more details you provide, the better we all can answer your question.

When creating new track in stereo... track opens in mono in arrange window

Since upgrading to 8.0.2...weird things are happening to previously saved projects. Stereo tracks are opening up mono and affecting following track. When creating new tracks in stereo.... tracks open mono. I don't know if this is due to 8.0.2 but all these freaky things have happening since. Also, when previewing Apple Loops, I can only hear it on one side, but Loops sounds fine once dragged to arrange window. Is this common or is my computer haunted ? Should I call Ghost Busters ? HELP !!! lol

Hi there,
I'm having the same problem as well: creating new tracks results in a mono software instrument, not the usual stereo software instrument. BUT... "Universal Track Mode" is already checked in my Audio prefs. I unchecked & rechecked it, but to no avail... I'm still only getting mono software instruments.
Any other ideas? No changes have been made to my system, and I'm running the latest version of Logic Pro.
Kirby

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
Thanks

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

How to register the recipient when create job by function

I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
Can you tell me how to register the recipient when create the job.
( in sm36, it is easily to do but how to do in coding? )
regards,
slam

Hi
I think in Back ground using the above fun modules you can't send a mail to the receipient.
see the use of the above fun modules;
IF p_bjob = 'X'.
    CONCATENATE sy-cprog sy-datum sy-uzeit
                INTO jobname SEPARATED BY '_'.
    CALL FUNCTION 'JOB_OPEN'
      EXPORTING
        jobname          = jobname
      IMPORTING
        jobcount         = jobcount
      EXCEPTIONS
        cant_create_job = 1
        invalid_job_data = 2
        jobname_missing = 3
        OTHERS           = 4.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      IMPORTING
        out_archive_parameters = arc_params
        out_parameters         = print_params
        valid                  = valid
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF valid = chk.
      SUBMIT ybrep
                      WITH < sel Screen>
                      AND RETURN
                      USER               sy-uname
                      VIA JOB            jobname
                      NUMBER             jobcount
                      TO SAP-SPOOL
                      SPOOL PARAMETERS   print_params
                      ARCHIVE PARAMETERS arc_params
                      WITHOUT SPOOL DYNPRO.
      CALL FUNCTION 'JOB_CLOSE'
        EXPORTING
          jobcount             = jobcount
          jobname              = jobname
          strtimmed            = 'X'
        EXCEPTIONS
          cant_start_immediate = 1
          invalid_startdate    = 2
          jobname_missing      = 3
          job_close_failed     = 4
          job_nosteps          = 5
          job_notex            = 6
          lock_failed          = 7
          invalid_target       = 8
          OTHERS               = 9.
      IF sy-subrc <> 0.
       MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ELSE.
        MESSAGE i029 WITH jobname.
      ENDIF.
    ELSE.
      MESSAGE s000 WITH text-003.
      STOP.
    ENDIF.
ENDIF.
Reward points if useful
Regards
Anji

Possible to limit dimensions and measures when creating presentations?

We are trying to use OLAP/BI Beans to add BI functionality to our next-generation data warehouse application. This application has its own security framework, with the ability to define permissions/privileges for objects. We need to integrate BI Beans/OLAP with this security framework.
One of the things we need to do is control which OLAP objects (like dimensions and measures) are available to a given user in the Items tab when creating a presentation. For example, user A might see dimensions Alpha, Bravo and measure Charlie, while user B might see dimensions Delta, Echo and measure Foxtrot.
We need to be able to apply these dimension/measure restrictions without using different Oracle users, with each having access only to their own OLAP objects. Our data warehousing application does not use Oracle and Oracle users to control security; it has its own internal frameworks for privileges/permissions. We therefore need to find a way to restrict access to OLAP objects in some programmatic way.
Here's an example of how this might work:
- I am a clinical analyst. I sign on to the data warehouse application. The data warehouse knows that as a clinical analyst, I have access to a certain list of objects and functionality across the application. One of the apps I have privilege to is the BI Bean Presentation Creation Application, so I click the menu to bring this up. I can now create BI presentations, but since I am a clinical analyst my list of available dimensions and measures do not contain any of the G/L, payroll or other financial OLAP objects.
- If I signed onto the data warehousing application as a different user, one that has a financial analyst role, I might see a different set of OLAP objects when I run the presentation application application.
So what we need is some API way to specify which dimensions and measures are available to a given user when they launch the presentation wizard. I've been digging through the BI Beans help and javadoc and have found a few things, but they aren't what I need.
Here's what I found:
- setItemSearchPath: this allows you to specify which folders are to be displayed. We want control at the OLAP object level, not at the folder level, so this doesn't work for us
- setVisibleDimensions: this controls which dimensions are available in the Dimensions tab, not which dimensions can be selected in the Items tab. Doesn't work for us
- setDimensionContext/setMeasureContext: These might work for us but I haven't been able to get them to retrieve anything yet. It also seems to me that these might set which dimensions/members are initially selected in the Items tab, not the list of dims/measures that are available for selection.
Any assistance on this matter would be greatly appreciated.
s.l.

Reply from one of our developers:
The get/setMeasureContext and get/setDimensionContext methods are currently only used by the Thick CalcBuilder (in a few limited scenarios) and cannot be used "to scope the dimensions and measures listed in Query and Calc builder based on user access rights".
The scoping of dimensions and measures based on user access rights should be performed at the MetadataManager/Database level.
This may change going forward as the real issue here is the static nature of the metadata and a general issue with the GRANT option within the database. So from the database perspective it is not possible to grant select priviledges on a single column of a table.
The metadata issue is more complex as the OLAP API reads the metadata only once on startup of a session. The list of available measures is based on the GRANT priviledge, so for relational OLAP this limits the data scoping capabilities. In 10g, the metadata for AW OLAP becomes more dynamic and contained and read directly from the AW. Therefore, with an AW OLAP implementation with 10g it could be possible to scope boht dimensions and measures quickly and easily.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation

Error when creating pivot table in BI publisher template

When I try to create a chart or pivot in BI publisher it keeps throwing error
'Please load Datasource first'
It allows me to create table so I am not sure why is complaing when creating a pivot.

Hi
This error you are getting while creating RTF template right?
yes, before proceeding to use the columns you need to load the XML data of your data model into your template
1. Open Microsoft Word.
2. From the Oracle BI Publisher menu, select Log On.
3. Enter your BI Publisher credentials and the URL for the BI Publisher server. (Contact your system administrator if you do not know the URL.)
4. The Open Template dialog presents the same folder structure as your BI Publisher Reports home page. Select the report for which you want to build a template.
5. Select Open Report to load the data to the Template Builder; or double-click <New> in the Layout Templates pane.
Note that any existing templates will be listed in the Layout Templates pane.
select <New> in Layout template section than select Open layout tempate to get automatically load your data into template..
ELSE
do manually,
in publisher,
after saving your report go to view the report
select data template and import that to your local drive.
now in your MS-Word.. in bi publisher toolbar
you find Data option, then select the load xml and give that path...
after this you can carry on creating charts or tables..
Hope this is what you want..
Thanks & Regards
Kishore Guggilla

Automatic creation of intercompany PO when creating a Sales Order

Hi Experts
Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
Desired results:
Sales order from store/plant YY belonging to company code Y to end customer A
Intercompany billing from plant XX belonging to company code X to store/plant YY
End customer billing from store/plant YY to end customer A
Thank you in advance for your help.

Hello Tsmash
I think you can acheive this with Regular Sales order + Inter Company STO combination.
Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
Then do the config for STO in MM using this menu path:
SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
Here, in the activity 'Define Shipping Data for Plants', enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain) from co code Y.
In the material master MRP 2 for Plant YY, maintain procurement type as F and Special Procurement as Z1.
Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
That's how it should work. Try it and revert with any issues.

Problem with collection names getting replaced when creating new collections in Photoshop Elements 5.0

We have been using Photoshop Elements 5.0 a lot lately to organize many photos into collections. A new problem just arose when creating a new collection.
As we named the new collection and clicked on "OK" it replaced another existing collection with the new name. The photos from the old collection were still there but now under the new collection name. This happened at least three or four times, each time a different "old" collection was renamed. Does anyone know why this would happen?
This past week we have added at least 20 new collections with no problem prior to this. Adobe actually had to shut down when this happened. Each time we reopened Adobe it would happen again randomly renaming a different "old" collection when we tried to add the new one. Any insights would be much appreciated.

Thank you - that was the problem and now it is working correctly
again!
Tom Z.
>>> saurabh288 <[email protected]> 05/24/09 4:23 AM >>>
It may be that the catalog has been corupted.Try repairing the
catalog of PSE.

Photoshop CS4 shuts down only when creating new project.

I've had CS4 web premium since nov. 08 and everything worked fine until the most recent update from adobe.
I ONLY have this problem with Photoshop cs4: when creating a new project after selecting the aspects (name, width, hight, etc.) when you press ok it shuts down and no error is given as to why it shut down, it just does.
opening documents that had been created prior to the last update isn't a problem, I'm able to do everything Photoshop cs4 has to offer.
I can also open a file started in another program and edit them in PS CS4 (ie: fireworks , or AI).
but for some reason if I want to start a project in photoshop it just shuts down, never used to happen. any clues? any one else have a similar problem and know how to fix this?
running on windows XP

I think you mean a new docuement - Photoshop doesn't have "projects".
Photoshop shouldn't "shut down" - there should be some message about a crash.
And the most likely causes at that point are OpenGL (try turning it off in prefs) and your default printer driver (try changing default printers).

When create heirarchy, can not find the entry which is in master data

Hi, SDNs
When create a heirarchy for a char , click this char button to add a fields to a node, i can't search the value which is actually in the master data.
Thansk for your time

If you go to create hierararchy or change mode of hierarchy
3 types of nodes you can create
1)Text node
2)Charecteristic node
3)Infoobject values node
text node - is simple any text node you can create
infoobject values node - if the master data is loaded you can create it
if master data is loaded make sure its activated and no master data is under "M" version.
charecteristic node - only if particular infoobject node is included in the tab "external chars in hierarchies" in RSD1 of that particular infoobject
Hope it Helps
Chetan
@CP..

Error when creating index with parallel option on very large table

I am getting a
"7:15:52 AM ORA-00600: internal error code, arguments: [kxfqupp_bad_cvl], [7940], [6], [0], [], [], [], []"
error when creating an index with parallel option. Which is strange because this has not been a problem until now. We just hit 60 million rows in a 45 column table, and I wonder if we've hit a bug.
Version 10.2.0.4
O/S Linux
As a test I removed the parallel option and several of the indexes were created with no problem, but many still threw the same error... Strange. Do I need a patch update of some kind?

This is most certainly a bug.
From metalink it looks like bug 4695511 - fixed in 10.2.0.4.1

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
Thanks for any suggestion

Text Box in DOCUMENTS Tab when creating a Contract

Hi
I'm using SRM 5 , when creating a Contract(GOA), the minute you select the Documents Tab , the text box for internal note is already open, and it fills up the top portion of the screen. This does not allow you to save( or to put your contract either on hold, or to Release.) You cannot select any of those options as the text box covers the entire top area, the only option available is to click on "back to inital screen".
When you select this option you loose all your work,and it takes you to the initial screen.
I cannot find the note which has to be applied , please assist.
Thanks
T.

Hi,
Kindly review the following note:
1067625 - ITS TextEdit: Control overlaps other screen elements
This note should resolve this issue,
Kind Regards,
Lisa

Err when Create MM

Similar Messages

Maybe you are looking for