Erro in SAP VC with SAP ERP Web Services

Hello SDN,
I wanna use the SAP WebService of an ERP 2005 system in the SAP Visual Composer 7.0 SPS8. I have configured the logical destinations as decibed in http://help.sap.com/saphelp_nw2004s/helpdata/de/f8/7889ce12924273a379c1c590675573/frameset.htm and the proxy settings.
When I try to search the webservice in SAP VC choosing the systems <SID> and <SID_metadata> the list keeps empty. I have configured the basic authentication for the system.
Could you please provide any help.
Thanks.
Best Regards,
Olaf Reiss

Hi Olaf,
I can only guess. Did you walk through Prakash' document on Troubleshooting (https://wiki.sdn.sap.com/wiki/display/VC/Troubleshooting+Connections)?
- You set the proxy, your system connection to ERP05 works when you test it in the portal?
- Does your mapped user have the right authorizations in ERP to browse the list?
- Does your VC use have the VCRole (https://wiki.sdn.sap.com/wiki/display/VC/Roles+needed)?
- Did you look in the VC log what it says (https://wiki.sdn.sap.com/wiki/display/VC/Enable+Log)?
- Alternatively: are you able to connect to a web service to this ERP system without browsing it, but by using the direct URL?
Let us know...
Mario

Similar Messages

Calling SAP ME web services with out reference names

Hello,
When calling SAP ME web services from non SAP clients, is there a way the users can by pass the reference names? Just pass SFC details instead of SFCREF.
example:- Data collection web service expects SFCRef:- SFCBO:<SITE>,<SFC> rather than that, what we are expecting is just pass SFC name and get response from ME.
-Adarsha.K.S

Hi Adarsha,
ME always accepts references only.you can do this in two ways,
1. Form a string with respective business object + site + object and pass.(ex: SFCBO:<SITE>,<SFC>) and then pass as reference.
2. through SOAP UI request XML. ex:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:me="http://sap.com/xi/ME" xmlns:gdt="http://sap.com/xi/SAPGlobal/GDT">
   <soapenv:Header/>
   <soapenv:Body>
     <ParametricRequest_sync xmlns="http://sap.com/xi/ME">
<ParametricRequest>
<SiteRef>
<Site>SITE1</Site>
</SiteRef>
<me:SfcRef>
<me:Sfc>SFC1</me:Sfc>
</me:SfcRef>
   <DcGroupRef>
<DcGroup>ABC</DcGroup>
<Revision>A</Revision>
</DcGroupRef>
<ParametricMeasure>
<MeasureGroup>ABC</MeasureGroup>
<MeasureName>PARAM1</MeasureName>
<Actual>1</Actual>
    </ParametricMeasure>
<ResourceRef>
<Resource>RESOURCE1</Resource>
</ResourceRef>
<me:OperationRef>
                <me:Operation>OPERATION1</me:Operation>
                <me:Revision>A</me:Revision>
        </me:OperationRef>
</ParametricRequest>
</ParametricRequest_sync>
   </soapenv:Body>
</soapenv:Envelope>
hope this helps.

How to send a XML file from SAP to WEB SERVICE

Hi folks,
i m creating a XML file with purchase order data, while saving the purchase order.now i need to send this XML file to some WEB SERVICE i.e to some perticular address in WEB.
can anyone give the step by step procedure to do this web service configuration? it's really urgent.
points must be awarded.
Thanks & Regards
pabitra

Hi all,
i need to send some purchase order data from SAP to WEB SERVICE. while saving the purchase order, i want to send some data from SAP to WEB SERVICE ( a perticular address in WEB).
i want to see those datas in xml format in WEB.
Now i am using SAP 4.7 version. Is this web service configuration is possible or not?
In SE37, i can not see the CREATE WEB SERVICE option in utilitities--> More utilities menu.is it possible in 4.7???
can anyone give any suggestion ? it's very urgent.
Thnaks
pabitra

C# Calling SAP RFC/Web Service Failure

Hi SAP Experts,
I am facing this problem. When an external system is calling my SAP RFC/Web Service, the external system(which is not SAP) is not getting the correct value. But when I test the RFC in SAP GUI It is working correctly. When I test between SAP server A & SAP Server B it is working correctly which is the recepient server is getting the correct value. What might cause this problem ? Urget help is needed here. Thanks.

Hi Hadi,
U need to expose a custom RFC as a Web Service. This is a simple web service that returns Customer Data (from kna1) based on the Customer ID which we provide as input.
In the RFC, U have to declare an internal table (G_RET) in the tables section of the RFC.
Now, U have to test the web service, U can see a check box with NULL option beside the G_RET.
cheers,
Hema.

Example using an SAP RFC (web service)

Is there a good example out there for using an SAP RFC (web service) with Xcelsius 2008? I cannot seem to get it to work. I am trying to use the SAP sample RFC called BAPI_FLIGHT_GETLIST. If someone can get an example to work using this BAPI, I would love to see it.
Thanks,
Kenneth

hi sap guys.. can ne 1 send me the complete documents on tc- st01.. system trace... i'll be thankful to you. Iam new to this forums can i dont know how to posta queston... just iam posting this queston in one of the queston's reply. Please help me out abt TC- ST01 and how to post a queston in this forums..
Thanks in Advance.
Regards,
Younus

Retrieve error message of SAP provided web service in web service response

Hi All,
We have a SAP provided web service that sometimes fails to process data it is called with. This is not a problem as the data sometimes is just plain wrong (i.e. date field contains text). However, the error is only logged in SAP and can only be queried using SRT_UTIL.
The problem is that the error is not reported back via the response. How can we set up the web service so that the error could be displayed by the calling party without logging into SAP?
Thanks for the help in advance.
Best Regards,
Daniel

Hi Calvin,
The WS is indeed synchronous. The problem is not whether the error is captured or not. It is captured indeed but it is logged inside SAP only and not returned via the Web Service response mechanism. The error message says that error message can be retrieved using SRT_UTIL.
This is a major problem as the users of the outside system calling SAP have no right to use SRT_UTIL to track down the error. They need to contact SAP basis in order to get to the end of it.
What we need to achieve is to get back the same error message that can be seen with SRT_UTIL via the web service.
Thanks.

"Load or Replenish" SAP ME web service

Hi Experts,
I am looking for SAP ME web service which will DO a Load/Replenish from other system. Does any one knows SAP ME provide? If not, any good idea to propose without SDK development?
Thanks!

Hi,
I cannot understand what you mean. Load/Replenish is loading one inventory into one slot. You mean I can use assembly point function to do that? I know SAP ME provide assembly point web service to consume component, but I think load/replenish is just PUT one inventory onto a slot of machine not consume yet.

How to integrate Microsoft and SAP using Web Services?

Hi All
How to integrate Microsoft and SAP using Web Services? If any one has document please send it to me. My id is [email protected]... Please
Help me
Best Regards
Ravi Shankar

Hi Ravi,
This is for Customizing Email and Other Web Services.
Create addresses
The address maintenance of R/3 users is carried out either via the R/3 User Maintenance (Transaction SU01) or the Private office settings (Transaction SO12):
Address --> Other communication...
Selection of the required communication service.
Enter address.
Copy or save.
b) Configuration of SAPconnect (Transaction SCOT)
Set communication method
4.0 + 4.5: Goto --> Customizing --> Communication methods
as of 4.6: Settings --> Communication methods
Set the method of the required communication service to the value 'SAPCONNECT' and save the setting.
Customized the same for Internet mailing.
C) If you want to Transfer Table Structure Values from SAP R/3 to Web Services then
       1. Create BAPI and Transfer whichever things you want.(Note: The Structure
           of BAPI should be similar to Web Structure (Datatypes).
       2. Create a BDC and Schedule it in the Background.
Hope it helps you, Awaiting for the Reward Points.
Thanks
Subrato Chowdhury

Issue with creation of web service

hello,
i use Jdeveloper 11.1.2.0.0 and i want to create a new Web service client and proxy to communicate with Bi publisher web services.
1) I Choose the client style JAX-WS Style
2) in the select Web services Description i set WSDL document URL to
http://dev2008:7001/xmlpserver/services/v2/SecurityService?wsdl
I let the steps 3 to 8 as default.
at the step 9
When i click on Finish
i have the error
java.lang.IllegalArgumentException: Not a valid simple name: 'v2/SecurityServiceClient'
     at oracle.javatools.parser.java.v2.internal.symbol.SymFactory.throwIllegalArgumentException(SymFactory.java:228)
     at oracle.javatools.parser.java.v2.internal.symbol.SymFactory.createSimpleNameSym(SymFactory.java:215)
     at oracle.javatools.parser.java.v2.internal.symbol.SymFactory.createClass(SymFactory.java:713)
     at oracle.jdevimpl.webservices.tools.weblogic.generator.SampleClientGenerator.generateClassDeclaration(SampleClientGenerator.java:247)
     at oracle.jdevimpl.webservices.tools.weblogic.generator.SampleClientGenerator.generateClientForPort(SampleClientGenerator.java:179)
     at oracle.jdevimpl.webservices.tools.weblogic.generator.SampleClientGenerator.generateForService(SampleClientGenerator.java:124)
     at oracle.jdevimpl.webservices.tools.weblogic.generator.SampleClientGenerator.generate(SampleClientGenerator.java:91)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.generateSampleClientCode(JDevWsimportTool.java:1264)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.generateCode(JDevWsimportTool.java:620)
     at oracle.jdevimpl.webservices.tools.weblogic.JDevWsimportTool.generateCode(JDevWsimportTool.java:443)
     at oracle.jdevimpl.webservices.tools.weblogic.WebLogicAdaptor.wsimportGenerateCode(WebLogicAdaptor.java:1020)
     at oracle.jdevimpl.webservices.tools.weblogic.WebLogicAdaptor.createProxy(WebLogicAdaptor.java:284)
     at oracle.jdeveloper.webservices.tools.WebServiceTools.createProxy(WebServiceTools.java:271)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.jdeveloper.webservices.tools.WebServiceTools$1.invoke(WebServiceTools.java:132)
     at $Proxy47.createProxy(Unknown Source)
     at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.createJaxWsProxy(CreateProxy.java:1194)
     at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.doGeneration(CreateProxy.java:382)
     at oracle.jdeveloper.webservices.model.proxy.generator.CreateProxy.action(CreateProxy.java:174)
     at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:142)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
best regards
Jean marc

hi,
no it's too large.
i think i have solved my problem,
originally the name of the web service is setting on v2/SecurityService_
</wsdl:binding>
<wsdl:service name="SecurityService">
<wsdl:port binding="impl:SecurityServiceSoapBinding" name="v2/SecurityService">
<wsdlsoap:address location="http://dev2008:7001/xmlpserver/services/v2/SecurityService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
if i change the name to SecurityService as follow , no error occurs
</wsdl:binding>
<wsdl:service name="SecurityService">
<wsdl:port binding="impl:SecurityServiceSoapBinding" name="SecurityService">
<wsdlsoap:address location="http://dev2008:7001/xmlpserver/services/v2/SecurityService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>

Unknown Error while communicating with O365 BEC Web Service

Hi Guys,
When I try to add a new mail user in O365 Exchange, one strange error is thrown.
Are any guys kind enough to help me ?
Here is the script and the error.
PS C:\Users\o365-user> $cred = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList
'[email protected]', $(ConvertTo-SecureString -String '*******' -AsPlainText -Force)
PS C:\Users\o365-user> $session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'https:
//ps.outlook.com/powershell/' -Credential $cred -Authentication Basic -AllowRedirection
WARNING: Your connection has been redirected to the following URI:
"https://pod51053psh.outlook.com/powershell-liveid?PSVersion=4.0 "
PS C:\Users\o365-user> Import-PSSession $session
WARNING: The names of some imported commands from the module 'tmp_zkc5sid4.gpq' include unapproved verbs that might
make them less discoverable. To find the commands with unapproved verbs, run the Import-Module command again with the
Verbose parameter. For a list of approved verbs, type Get-Verb.
ModuleType Version Name ExportedCommands
Script 1.0 tmp_zkc5sid4.gpq {Add-AvailabilityAddressSpace, Add-DistributionGroupMember...
PS C:\Users\o365-user> $users=Get-MailUser
PS C:\Users\o365-user> New-MailUser -Name '[email protected]' -DisplayName 'Test LIU'
-MicrosoftOnlineServicesID '[email protected]' -Password $(ConvertTo-SecureString -String '*****' -AsPlainText -Force)
Unknown Error while communicating with O365 BEC Web Service (Exception type
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException", message=
"Microsoft.Exchange.Management.BecWebService.CouldNotCreateBecSyncServiceException: Couldn't create BEC Web Service:
The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft
Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject ---> System.ArgumentException: The matching certificate for certificateSubject
CN=ExoProvToO365.outlook.com, OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be
found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)
--- End of inner exception stack trace ---
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.InvokeWithRetry[TResponse](Action operation)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.GetUserByUpn(GetUserByUpnRequest request)
at Microsoft.Exchange.ProvisioningAgent.BecWebServiceLiveIdManager.GetMemberType(SmtpAddress memberName)", inner
message "System.ArgumentException: The matching certificate for certificateSubject CN=ExoProvToO365.outlook.com,
OU=Microsoft Corporation, O=Microsoft Corporation, L=Redmond, S=WA, C=US couldn't be found.
Parameter name: certificateSubject
at Microsoft.Exchange.Security.Cryptography.X509Certificates.TlsCertificateInfo.FindFirstCertWithSubjectDistinguishe
dName(String certificateSubject, Boolean checkForValid)
at Microsoft.Exchange.Management.BecWebService.BecWebServiceHelper.CreateService(Uri url)")
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailUser], RecipientTaskException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=d97a193e-91a7-4430-ac64-6b7003f5b9b0,TimeStamp=4/23/2015
9:37:58 AM] [FailureCategory=Cmdlet-RecipientTaskException] 3F9FDA25,Microsoft.Exchange.Management.RecipientTasks
.NewMailUser
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'ApplicationImpersonation' -User 'test1_1@smokeazu
rebeta5.onmicrosoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=88777637-298d-4bb1-972f-b61161566a57,TimeStamp=4/23/2015
9:37:59 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> New-ManagementRoleAssignment -Role 'Mailbox Search' -User '[email protected]
microsoft.com'
Couldn't find a user with the identity "[email protected]".
+ CategoryInfo : NotSpecified: (:) [New-ManagementRoleAssignment], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : [Server=SG2PR01MB0540,RequestId=2b64d3a2-97da-4de5-be8c-00ad73452456,TimeStamp=4/23/2015
9:38:00 AM] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 921A76AD,Microsoft.Exchange.Management.Rba
cTasks.NewManagementRoleAssignment
+ PSComputerName : pod51053psh.outlook.com
PS C:\Users\o365-user> Remove-PSSession $session
PS C:\Users\o365-user>
Thanks
Budlion LIU

Hello,
Or you can also ask on Exchange Online Forum:
https://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Handle Session data with JAX-WS web services

Is it posible to to handle session tracking with JAX-WS web services without implementing my own session logic.
If posible how do we put values in to session and get them back.
And also assuming that sessions are supported is it posible to share the same session between two web services on the same web application.

Hello!
Do you have any solution to your problem now? I also need to maintain a session bean between 2 webservices. If you solved this, can you please tell me how?
Thanks a lot!

ALBPM interaction with WS-Policy web services

Can ALBPM integrate with ws-policy web services out of the box? If not, what would be the recommended process to handle this situation?

Hi,
yes, I think to remember that there is support for a single style only. If you need another one too then you create a new project.
Frank

Integrating FIM with SAP using web services connector

Hi
I am implementing the FIM web services connector to integrate with SAP. The MS connector config guide for SAP documentation seems to me missing some content or at least I think it might be written for an earlier version of
SAP than the version we are working with(different screenshots, options, etc). The version of SAP we have implemented is EHP6 for SAP ERP6 which I believe translates to ECC6.
SAP web services have been configured and FIM performs successful discovery of the wsdl endpoint and BAPI operations as expected. Our issue is that FIM fails to run a full import. From the digging around web service config and error logs two observations comes
out:
1. FIM Full Import workflow does not render correctly through the web service configuration tool and complains of a duplicate attribute "xml:space is a duplicate attribute on line on line 424 on position 103". Review of the wsconfig generated by the
webservice config tool points to an variable supplied to a construct the query to a BAPI of HR infotype 0006. Extract below:
...<InArgument x:TypeArguments="d:BAPIP0006L" xml:space="preserve">[If(Not IsNothing(addressInfo) AndAlso Not IsNothing(addressInfo.item), addressInfo.item, Enumerable.Empty(Of BAPIP0006L)()).
OrderByDescending(Function(a) DateTime.ParseExact(a.VALIDBEGIN, dataSourceDateFormatValue, Nothing)).
ThenByDescending(Function(a) Integer.Parse(a.RECORDNR)).FirstOrDefault()]</InArgument>...
I can only guess that it means the query should keep the spaces within the string it passes to SAP but this is where my understanding stops.
2. SAP returns errors about not implementing a BAPI EMPLOYEE_GETDATA function which is not part of the exposed BAPI operations. Well the obvious solution to this would be expose this missing operation (which is undocumented in MS config guide) however this
BAPI is a core requirement to retrieve person information. I would be hugely surprised if this operation was not factored into the config. This makes me think that to understand this better I need to resolve issue 1 first and get the rendering sorted first.
Has anyone come across the above issues with a recent implementation with this connector? Or help point me in the right direction?
any help would be greatly appreciated!
thanks!!

Hi Joe,
you most probably missed the sentence "Add the required BAPI’s in the function group and select those required BAPI’s and click continue." in the "Connector for SAP.docx" document on page 8. In other words your webservice does not provide the required
BAPIs.
In the "DefaultSAPECC_6.wsconfig" the workflows for import and export require specific BAPIs.
Also make sure that your Service Definition has got the same name as in the documentation and the workflow template.
I was fighting with this for the last 4 days but in the end got it working.
Hope this helps
Chris

SAP provided web services in ECC 6.0

Hi all,
I need to consume some web services provided in <a href="http://erptest.esworkplace.sap.com/sap/bc/gui/sap/its/webgui">web services from workplace</a> (workplace user id needed to get access) from my ECC 6.0. I want to install these web services into my system.
1. How do I get these readymade web services into my system?
2. Do I need to install something for this?
3. If yes, where can I get the installable from?
Regards,
Ankit

Hi Ankit,
to add some more info to this:
- The services are coming in the form of an ERP 2005 Add-On
- Once you installed the add-on, you need to activate the services you wish to use in transaction WSCONFIG
- You can then test the services from transaction WSADMIN and start making use of them; in WSADMIN, you will only retrieve the services you have previously activated
Further tip:
- If you are not sure about which service you need, is always good to check the ES Workplace for getting information on each existing service
- In case you want to use the services in Visual Composer (always nice for quickly creating applications consuming services) you can refer to the following link:
Consuming Web Services Using Visual Composer [original link is broken] [original link is broken]
Rgds,
Karim

Web Service call - XI - SAP and SAP - XI - Web Service response ???

Hi ALL,
Need some guidance on the following Scenario :
A Legacy system would transfer some data to SAP thoruhg a Web Service call and would expect a response from SAP by way of a response to the same Web service call
A synchronous Interface , inbound to sap via a Web service call and back to the legacy system through the response to the same Web Service .
Need to provide WSDL to the Legacy system
Any help on how to do the above mentioned will be apreciated
thanks in advance

SD,
Check this weblog for step by step procedure:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
Here instead of deploying in XI you will deploy your webservice in the legacy system.
If you want to test this webservice then check this weblog:
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
---Satish

Erro in SAP VC with SAP ERP Web Services

Similar Messages

Maybe you are looking for