Error 1 occurred at ABAPI Dist Copy Non-VI Files.vi - ABAPI Dist Build LLB Image.vi - ABAPI Copy Files and Apply Settings.vi - DBEP_Invoke_Build_Engine.vi - DBUIP_Build_Invoke.vi - DBUIP_Build_Invoke.vi.ProxyCaller
Error compiling a library, Kernel32.dll
Attachments:
error LabVIEW82.jpg 30 KB
Hey elnibjo;
This error seems to be the result of the application builder not being able to find the rc file I suggest you follow the steps listed in the following KB:
Error Creating Source Distributions Involving rc Files
(http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C)
Alternatively you can change the path information in the CLFN to contain only the DLL name.
Let me know if this works
Good luck with your applibation!
Similar Messages
-
When I try to build executables in LabView 8.01 I get message:
Error 7 occurred at Copy in ABAPI Dist New VI Library.vi->ABAPI Dist Chk for Destinations.vi->ABAPI Copy Files and Apply Settings.vi->EBEP_Invoke_Build_Engine.vi->EBUIP_Build_Invoke.vi->EBUIP_Build_Invoke.vi.ProxyCaller
Best RegardsI got the same error as I tried to build my application, the reason was the string I set for the 'Build specification name' property of my build.
I changed from '3DC - Dlog Data Compacter ' to '3DC' and it worked afterwards..quite strange behaviour.. -
When trying to build an application using labview 7.1 and windows XP, I get the error
Error 1003 occurred at Open VI Reference in Dist Copy Non-VI Files.vi->Dist Build LLB Image.vi->Dist Build App Image.vi->Build Application.vi
I've tried the crtl-shift-run as well as a mass compile and I still get the error.
Any ideas?
Thanks,
MikeHopefully this thread, or this KB article might help.
It seems like this could come from a lot of things, but there's suggestions in those which might lead you in the right direction
Message Edited by Day on 09-22-2006 02:07 PM -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
my iphone won't work after fatal error occurred installing iOS5.1 have followed allsteps to reconfigure software onto windows still no phone just a usb and itunes picture on screen
Connect the phone directly to the computer, not a hub.
Disconnect all other USB devices except keyboard and mouse.
Disable your firewall
Disable your antivirus
In iTunes if it recognizes the phone click "Restore"
If it doesn't recognize the phone:
Disconnect the phone from the phone end, leave the USB cable plugged into the computer
Hold the HOME and SLEEP buttons until the screen turns black, excactly 10 seconds, then release the SLEEP but continue holding the HOME (If an Apple logo appears you have held SLEEP too long; do it over)
While holding HOME connect the cable to the phone
As soon as iTunes recognizes the phone release the HOME button and it should restore.
If neither procedure works note the exact error message and post it. -
Error occured when try to open the BI report from words (template builder)
Hi,
After i LogOn into BI Publisher thru words, successful. But when choose a report to open, error returned as "Error occured. Please check the settings and try again."
My team had do various of testing, try to reinstall the BI publisher desktop, but not able solve the problems. From the forum, someone comment is due to data loaded too large, so we try to put a query which only select single record from a small database, but still same error.
then we suspect is due to the proxy setting, because once i reset to bypass the proxy, i able to open the report thru words without any error.
i found this comment from online doc :
Have set up the proxy parameters (to avoid any firewall problems with the Web Services and RSS data set reports) in the xmlpserverstart.bat file or the oc4j.cmd file as per your installation.
Modify the following line, which defines JAVA_HOME. (Observe the proxy parameters in bold.):
• "%JAVA_HOME%\bin\java" %JVMARGS% -jar -Dhttp.proxyHost= <myproxy.mycompany.com> -Dhttp.proxyPort=<Port> "%OC4J_JAR%" %CMDARGS%
Restart xmlpserver or oc4j as the case may be.
but i can't found this xmlpserverstart.bat or oc4j.cmd from server.
Please comment.
Thanks
Regards
Eelynhi,
as per you query posted here, please chk ur sql statement what u had written...there may be some problem with that query that is y ur getting the below error.
"error occured. please check the settings and try again BI publisher"
regards
Kanoj -
My code javascript script is
objConnection = new ActiveXObject("ADODB.Connection");
objConnection.Provider="ADsDSOObject";
objConnection.Open("ADs Provider");
objCommand = new ActiveXObject("ADODB.Command");
objCommand.ActiveConnection = objConnection;
objCommand.CommandText = "SELECT sAMAccountName,displayName, givenName, SN,CN, mail,distinguishedName,primaryGroupToken,member,ADsPath,MemberOf FROM 'LDAP://"+GrpDomain+".corp.com' WHERE objectCategory='group'
and objectClass='group' and sAMAccountName='"+GrpName+"'";
objRecordSet = objCommand.Execute();
This code executes successfully on window 2008 server machine,
but gives "Operations error occurred" on windows 8 operating system
on line of code highlighted aboveHi,
In regard to scripts related issue, I suggest you refer to The Official Scripting Guys Forum to get professional support:
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Thank you for your understanding and support.
Best Regards,
Amy Wang -
Random error occur if a program including Non-regeration AO and Synchronous AO&AI function?
Hi,
Does you know Non-regeneration of data and synchronous AO&AI functions can be written in same VI or not?
I did a program which needs Non-regeneration of Signal and Synchronous AO&AI functions.
When I run this program, a error 200292 is random occured. Would you know how to solve it? Thanks very much.
Attachments:
unstable question.vi 144 KBHello,
"1. If no. of sample is -1, then I can't control how many points it capture. I cannot do the alignment between AO and AI data. For example, AO is 100kpts and AI is 90~120kpts."
Even though you are displaying 90 - 120 kpts per iteration of your while loop, the AI and AO is still synchronized. The reason you are seeing a difference in the number of points written and read in each loop is because the DAQmx Read.vi immediately reads whatever data is in the buffer. Then the DAQmx Write.vi writes 1000 points. The DAQmx Write will hold the loop until all 1000 points are written. When the next DAQmx Read is called, it picks up the data that it missed in the previous iteration plus the new that data that was written.
"2. If the "Sinewave generation" is run before AO write, the level or frequency AO signal cannot be changed during program running. However, I need it to be changed easy and effectively."
To change the waveform parameters during execution, you just need to put another waveform generator inside the while loop. I have made this modification and attached the new VI. Keep in mind that with AO, the output frequency is dependent on the frequency control, sampling frequency of the generator, and update rate. Use this formula to calculate actual output signal frequency:
Output Frequency = [Update Rate * Frequency] / Sampling Frequency
Let me know if you have any further questions.
Regards,
Sean C.
Attachments:
Multi-Function-Synch AI-AO-Non-Regen_2.vi 190 KB -
Error occurred while building the following file
hi,
i get an error while compilating my programm. i did not change the vis listed below, they are standard express vi's...
An error occurred while building the following file:
C:\Program Files\National Instruments\LabVIEW 8.0\vi.lib\express\express analysis\CurveFittingBlock.llb\subCurveFitting.vi
Error 1003 occurred at ABAPI Dist Chg and Save VIs.vi -> ABAPI Dist Build LLB Image.vi -> ABAPI Copy Files and Apply Settings.vi -> EBEP_Invoke_Build_Engine.vi -> EBUIP_Build_Invoke.vi -> EBUIP_Build_Rule_Editor.vi -> BUIP_Create_Build_Rule.vi -> EBUIP_Global_OnCommand.vi -> EBUIP_Global_OnCommand.vi.ProxyCaller
Possible reason(s):
LabVIEW: The VI is not executable.I would recommend to update to at least LabVIEW 8.0.1 (free update) and masscompile the vi.lib folder.
You can download the update here:
http://digital.ni.com/softlib.nsf/websearch/4C1209D42320BCFD8625711C005FB25B?opendocument&node=13207... -
Hi All
I am installing SAP IDES Ehp 6 on SYBASE_ASE_15.7.0.50 and facing an error as follows:
An error occurred while processing option Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > Sybase ASE > Central System > Central System( Last error reported by the step: Assertion failed: File C:\SAP ECC 6.0 Ehp 7.0\Sybase ASE 15.7.0.050 RDBMS\Sybase ASE 15.7.0.050 RDBMS Windows Server on x64 64bit\SYBASE_ASE_15.7.0.50_RDBMS_for_BS_\SYBASE_WINDOWS_X86_64\dbsrvresp.txt is missing on the RDBMS media). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERPEhP6/AS-ABAP/SYB/CENTRAL/.
Would you help me pleaseplease download correct software.
Installations and Upgrades - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP6 FOR SAP ERP 6.0" SAP EHP3 FOR SAP NETWEAVER 7.0" SOFTWARE PROVISIONING MGR 1.0
SOFTWARE PROVISIONING MANAGER
INSTALLATION, COPY, AND TRANSFORMATION OF SAP ABAP AND JAVA SYSTEMS
General Information
Software Provisioning Manager 1.0 SP04 supports:
With SWPM10SPxx_PL.SAR:
Products based on SAP NetWeaver 7.1x
SAP NetWeaver Composition Environment 7.1x
SAP NetWeaver Composition Environment 7.2
Products based on SAP NetWeaver 7.3x
Products based on SAP NetWeaver 7.4
With 70SWPM10SPxx_PL.SAR:
SAP NetWeaver 7.0, including Enhancement Package 1, 2, 3
SAP Business Suite 7i 2011, 2010, 7 SR1, 2005 SR3 based on SAP NetWeaver 7.0, including Enhancement Package 1, 2, and 3
SAP Solution Manager 7.0 including EHP1 SR1
SAP Solution Manager 7.1 SR1
Thanks
Siva -
An error occurred while verifying disc.
Hi, whenever I try to burn a CD (any brand) the burn goes through ok and when it gets to verify (any cd burning software) it says "This disc may not work. An error occurred while verifying disc."
I have reinstalled, clean installed, done everything even tried a NEW cd drive and got the same issue. So, I am sure it's a software problem.
When I do run a burn, this is what I get:
IWhat I have been doing is running the "Console" application from the Utilies folder to see what is going on.
This is the message I get:
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn finished, Sun Feb 5 19:04:56 2006
Finder: Verify started, Sun Feb 5 19:04:56 2006
Finder: Discrepancy in block 68 at byte 42.
Finder: Source data: 31D5 2B31 E3B3 3B3B 1FD1 D2C8 52ED 1D51
Finder: Burned data: 31D5 2B31 E3B3 3B3B 1FD1 52C8 52ED 1D51
Finder: Verify failed, Sun Feb 5 19:04:58 2006
There is always a problem with byte 42 and the SOURCE DATA is always different from the BURNED DATA by one element.
Always in exactly the same sector of numbers digits. As you can see in the source data it reads "D2C8" and in burned data it reads "52C8"
Here is a message from a different burn attempt:
Finder: Burn underrun protection is supported, and enabled.
Finder: Burn finished, Sun Feb 5 18:39:42 2006
Finder: Verify started, Sun Feb 5 18:39:42 2006
Finder: Discrepancy in block 220 at byte 42.
Finder: Source data: 9F2F 059B 208F 5CD7 A197 EBB2 B35D BF53
Finder: Burned data: 9F2F 059B 208F 5CD7 A197 6BB2 B35D BF53
Finder: Verify failed, Sun Feb 5 18:39:44 2006
As you can see its the same byte problem and same problem with burned/source data.
I have no clue what to do - any advice would be great.
I have reinstalled a million times, clean install, everything.
Is it a byte problem? kernel problem? It's worked once or twice after a clean install but never again. It's been this way from the box and Apple refused to fix it. So now I am stuck hoping for some advice.
ThanksThe fact that it worked once or twice after a clean install suggests that you may want to defrag your HDD; esp. if you have only one and the OS is on the same partition as your data.
You will need TTP4 or Disc Warrior, etc., to accomplish this. Disc Utility cannot do it.
Personally, I never bother with verification. Unless the data is extremely sensitive, there's no real point. If the disc loads OK, and you can read/copy the data back to your HDD, that's what counts. -
RC-50004: Fatal: Error occurred in ApplyDatabase: Control file creation fai
Hi guys,
I am cloning and EBS 12.1.3 from one server to another, and when Configuring the target system database server with ''perl adcfgclone.pl dbTier'', I am getting the following error:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
MOS is saying that it is due to wrong permissions on the /var/tmp/.oracle directory and we should give it the following permissions:
chmod 777 /var/tmp/.oracle
After giving those permissions and rebooting the server , and running the perl adcfgclone.pl dbTier script, I am still having the same problem:
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
This is the contents of the ApplyDBTier log file (since the file exceed 30.000 characters, i am going to post the parts where the errors occur:
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$ cat ApplyDBTier_05021530.log
Started ApplyDBTier at Thu May 02 15:30:44 WAT 2013
Version:
ApplyDBTier.java : 120.6.12010000.3
ApplyDBTier (prog) -1 true true true...
# Calling ApplyDBTechStack...
Executing runInstallDriver...
Started unzipping files...
Completed runInstallDriver.
Executing home registration for s_db_oh...
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adouidb.pl
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl to /u02/oratest/db/tech_st/11.1.0/appsutil/out/ouicli20.pl
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/config_ux.tmp
dest : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c
backup : /u02/oratest/db/tech_st/11.1.0/rdbms/lib/config.c to /u02/oratest/db/tech_st/11.1.0/appsutil/out/config21.c
setting permissions: 700
setting ownership: oratest:dba
instantiate file:
source : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adlnkoh.sh
dest : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
backup : /u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh to /u02/oratest/db/tech_st/11.1.0/appsutil/out/adlnkoh20.sh
setting permissions: 700
setting ownership: oratest:dba
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/perl/bin/perl -I /u02/oratest/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/oratest/db/tech_st/11.1.0/appsutil/perl /u02/oratest/db/tech_st/11.1.0/appsutil/clone/ouicli.pl
script returned:
Beginning OUI CLI cloning for s_db_ohThu May 2 15:30:46 2013
/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin/java -classpath /u02/oratest/db/tech_st/11.1.0/appsutil/java:/u02/oratest/db/tech_st/11.1.0/oui/jlib/OraInstaller.jar:/u02/oratest/db/tech_st/11.1.0/appsutil/java/xmlparserv2.jar oracle.apps.ad.clone.util.OracleHomeCloner -OUICLI -e /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml -nolink -oaVar s_db_oh -homestub db -log /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/ohclone.log
Running OUI CLI home cloning from within OracleHomeCloner:
/u02/oratest/db/tech_st/11.1.0/oui/bin/runInstaller -clone -silent -force -nolink -waitForCompletion -invPtrLoc /u02/oratest/db/tech_st/11.1.0/admin/oui/ERP_DLAERPSRV01/oraInst.loc ORACLE_HOME=/u02/oratest/db/tech_st/11.1.0 ORACLE_BASE=/u02/oratest/db/tech_st/11.1.0 ORACLE_HOME_NAME=ERP_DB__u02_oratest_db_tech_st_11_1_0 -J-Doracle.installer.noLink=true
Finished OUI CLI cloning for s_db_oh with return code: 0Thu May 2 15:30:56 2013
Executing script in InstantiateFile:
/u02/oratest/db/tech_st/11.1.0/appsutil/clone/adlnkoh.sh
script returned:
adlnkoh.sh started at Thu May 2 15:30:56 WAT 2013
Log file located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .16
Please check logfile located at /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/make_05021530.log
.end std out.
.end err out.
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/sqlnet.ora
Processing driver file: /u02/oratest/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u02/oratest/db/tech_st/11.1.0/appsutil/install/ERP_DLAERPSRV01/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/dbs/initERP.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
File exists
File deleted
Checking for file: /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u02/oratest/db/tech_st/11.1.0/appsutil/out/ERP_DLAERPSRV01/05021531/ERP_DLAERPSRV01.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u02/oratest/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u02/oratest/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not Available
Customizations found : None
File system Context file :/u02/oratest/db/tech_st/11.1.0/appsutil/ERP_DLAERPSRV01.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
===========================================================================
Starting Updates of Context file Thu May 02 15:31:44 WAT 2013
found context version : 120.34.12010000.14
available update version : 120.34.12010000.14
No updates to apply
Starting DB listener with command:
/u02/oratest/db/tech_st/11.1.0/appsutil/scripts/ERP_DLAERPSRV01/addlnctl.sh start ERP
Logfile: /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process ERP ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 02-MAY-2013 15:32:23
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u02/oratest/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Log messages written to /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
STATUS of the LISTENER
Alias ERP
Version TNSLSNR for Linux: Version 11.1.0.7.0 - Production
Start Date 02-MAY-2013 15:32:23
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u02/oratest/db/tech_st/11.1.0/network/admin/ERP_DLAERPSRV01/listener.ora
Listener Log File /u02/oratest/db/tech_st/11.1.0/admin/ERP_DLAERPSRV01/diag/tnslsnr/DLAERPSRV01/erp/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523)))
Services Summary...
Service "ERP" has 1 instance(s).
Instance "ERP", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.sh: exiting with status 0
addlnctl.sh: check the logfile /u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/addlnctl.txt for more information ...
.end std out.
.end err out.
checking DB Connection...
DEBUG: checkDBConnection in()
ADX Database Utility
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
DEBUG: checkDBConnection out()
Skipping Profile Phase
Skipping Apply Phase
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Thu May 2 15:32:40 WAT 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/oratest/db/tech_st/11.1.0
ORACLE_SID : ERP
TWO_TASK :
PATH : /u02/oratest/db/tech_st/11.1.0/perl/bin:/u02/oratest/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/oratest/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/oratest/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
LD_LIBRARY_PATH : /u02/oratest/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/oratest/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/oratest/db/tech_st/11.1.0/ctx/lib
Executable : /u02/oratest/db/tech_st/11.1.0/bin/sqlplus
The log information will be written to
/u02/oratest/db/tech_st/11.1.0/appsutil/log/ERP_DLAERPSRV01/adcrdb_ERP.txt
Creating the control file for ERP_DLAERPSRV01 database ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:40 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORACLE instance shut down.
Connected to an idle instance.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgpbitsper
CREATE CONTROLFILE REUSE SET DATABASE "ERP"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter tablespace TEMP add tempfile '/u02/oratest/db/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ALTER DATABASE RENAME GLOBAL_NAME TO "ERP.camairco.local"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare lib_ver varchar2(3);
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ERROR:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0
Disconnected
exit_code=1
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu May 2 15:32:42 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to an idle instance.
ORACLE instance shut down.
Disconnected
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : DLAERPSRV01
sDbDomain : camairco.local
sDbPort : 1523
sDbSid : ERP
sDbUser : apps
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@DLAERPSRV01.camairco.local:1523:ERP
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP)))
Exception occurred: java.sql.SQLRecoverableException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DLAERPSRV01.camairco.local)(PORT=1523))(CONNECT_DATA=(SERVICE_NAME=ERP.camairco.local)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:635)
at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
at java.lang.Thread.run(Unknown Source)
[oratest@DLAERPSRV01 ERP_DLAERPSRV01]$
Please guys, how can I solve this problem?@Hussain Sawwan
Hi Hussain,
After successfully configured the DbTier and AppsTier with their respective post clone scripts the appstier was automatically started at the end.
But now, I can't seem to connect with my IE 9 and Firefow browsers.
Link: http://dlaerpsrv01.camairco.local:8002/OA_HTML/
Contents of the portpool.lst:
***** List of ports allocated based on port pool 2 *****
Database Port : 1523 (EXT_PORT)
RPC Port : 1628
Web SSL Port : 4445
ONS Local Port : 6102
ONS Remote Port : 6202
ONS Request Port : 6502
Web Listener Port : 8002
Active Web Port : 8002 (DUP_PORT)
Forms Port : 9002
Metrics Server Data Port : 9102
Metrics Server Request Port : 9202
JTF Fulfillment Server Port : 9302
MSCA Server Port : 10212-10217
MCSA Telnet Server Port : 10212,10214,10216 (DUP_PORT)
MSCA Dispatcher Port : 10806
Java Object Cache Port : 12347
OC4J JMS Port Range for Oacore : 23010-23014
OC4J JMS Port Range for Forms : 23510-23514
OC4J JMS Port Range for Home : 24010-24014
OC4J JMS Port Range for Oafm : 24510-24514
OC4J JMS Port Range for Forms-c4ws : 26510-26514
OC4J AJP Port Range for Oacore : 21510-21514
OC4J AJP Port Range for Forms : 22010-22014
OC4J AJP Port Range for Home : 22510-22514
OC4J AJP Port Range for Oafm : 25010-25014
OC4J AJP Port Range for Forms-c4ws : 26010-26014
OC4J RMI Port Range for Oacore : 20010-20014
OC4J RMI Port Range for Forms : 20510-20514
OC4J RMI Port Range for Home : 21010-21014
OC4J RMI Port Range for Oafm : 25510-25514
OC4J RMI Port Range for Forms-c4ws : 27510-27514
[root@DLAERPSRV01 appltest]#
Entry in the /etc/hosts in my Win 7 Laptop:
192.168.0.245 dlaerpsrv01.camairco.local dlaerpsrv01
What could be the cause of this problem? It is unfortunate to reach at this point and not being able to connect. -
Hello,
I get the following error when trying to attach an event reciver ->
Error occurred in deployment step 'Add Solution': Failed to load receiver assembly . The system cannot find the file specified.
This happens only when i try to change the deployment target from "GlobalAssemblyCache" to "WebApplication".
Steps to reproduce->
1. Create a new feature and add an event receiver. Deploy the solution. Everything works fine.(Since deployment target is GlobalAssemblyCache). If you now change the deployment target to "WebApplication" , it works too.
2. Now, restart visual studio. Change Deployment target to "WebApplication" without deploying the solution. And you get the above error.
3. Every time you restart your visual studio with deployment target as "WebApplication", you will receive this error.
Any idea?? Manual deployment of the solution works fine too.
When i go to virutal path bin directory, the dll is missing because of which the error occurs. Dont know why, it doesnt copy the dll to bin?
Thanks in advance,Hi,
Feature receivers must be deployed in the GAC & cannot be deployed to private bin of the WebApplication.
Link: http://msdn.microsoft.com/en-us/library/ms469501.aspx
HTH !!!
AnjaliCH-MSFT -
"There was a problem downloading the software for the iPhone....An unknown error occurred (-23)." What should I do?
i have the same problem:
I have an iphone 4s and I have been trying for months to update my phone from iOS 6.1.3 to the new one.
I recently got a new computer (my old harddrive crashed and will not work at all) and I just now copied all my music and photos to the computer.
Now I have been trying to update to the iOS 7.1 both on iTunes and on the iPhone but neither one work. I keeps saying "unknown error" .
I am wondering if I restore it to factory settings and then update it will the install work?
also since i have backed up to the iCloud and my computer..will i be able to recover my music, contacts, notes and photos???
thanks in advance. -
The iTunes Library file cannot be saved unknown error occurred (-54)
Anyone seen this before and can it be fixed
The iTunes Library file cannot be saved unknown error occurred (-54)adamwineguy wrote:
I was having this issue as well, after doing two things: updating iTunes yesterday, and installing and running ClamXav, a Mac antivirus tool.
I have now fixed the issue, first I made sure that I had the proper permissions for iTunes and it's library folders. Then I completely removed ClamXav and all its related files and restarted iTunes. Now I no longer get this error when adding new media to iTunes or updating apps, and the library file saves fine. For some reason I think it was related to the antivirus software.
I think it was a coincidence as ClamXav only modifies permissions on the files it installs and none of those are anywhere near your iTunes folders, but I'm glad you got it working.
Maybe you are looking for
-
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone
-
Cannot upload any images from iPhone 4 to Macbook Pro. Please help!
Hi all, I'm pretty much tearing my hair out with this one, I don't know what to do - I simply cannot upload any photos from iPhone 4 to Macbook Pro. This problem appeared out of the blue. I am trying to upload to iPhoto - not working. I have clearing
-
does any one know how to fix it
-
Executable Jar: Could not find the main class. Program will exit.
I have a jar which contins the class Main.class. Following details are specified in the Manifest file. Manifest-Version: 1.0 Main-Class: Main However, when I double click the jar file, I get the error... Could not find the main class. Program will ex
-
Does anyone know what time I'll be able to download CS6?
I've subscribed for Creative Cloud and looking forward to downloading the CS6 suite of products here in the UK? Will I be able to do this from 12am tonight? Cheers