"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
We are running into a problem which we have noticed on UCCE 8.5 and havent seen on earlier 7.5 release.
If we setup a CTI port as agent device target and if we try to login the agent using Cisco Desktop (Not CAD, just CTI OS Client) then we get following error:
"Error [10151] The LCP Port on CCM Admin for Mobile Agent is not Configured or misconfigured"
But this wasnt the issue with 7.5 and we were able to do agent login with CTI Port as device target. We dont intend to use Mobile Agent feature but just login UCCE agent to CTI port as the device.
Do we know if this is a known issue or if something has changed between 7.x and 8.x release which could be is causing this?
So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.
Similar Messages
-
We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
Did a connection test and it was successful!
Tried the URL (maybe it needs more):
https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
That resolves to some :8051 port address and then spits out this message:
The server encountered an error processing the request. See server logs for more details.
I checked and the data management gateway is running.
Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
I am seeing this event:
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]O365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
Hi Experts,
I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
error processing the request. See server logs for more details."
This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
the feeds.
I can able to see below logs in log files.
Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object. at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type) at Microsoft.SharePoint.C...
...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext() at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)
at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
DuplicatePropertyNamesChecker duplicatePropertyNa...
...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
Action afterPropertiesAct...
Can anyone please help me out.
Thanks!
dineshO365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.
Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions? If this is just a data drive you may want to consider "ignore ownership on this volume".
Otherwise I can only say I have not been reading good things about Seagate drives recently. I have some of their rock-solid ones from about 10 years ago (still running well), but now...? -
i iphone is showing an error 0xE800005 the logo starts turning in itself for hours. What should I do?
The page is just on my desktop and not on a server, so I'll post the code (sorry).
Apparently Dreamweaver can't find the file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Unable to load page</title>
<style type="text/css">
#container {
width: 50%;
margin: 3em auto;
font-family: Verdana, Geneva, sans-serif;
#dwicon {
float: left;
margin-right: 2em;
#error {
padding-top: .5em;
#desc {
</style>
</head>
<body>
<div id="container"> <img id="dwicon" src="dw://configuration/Shared/ICE/Images/warning_icon.gif" width="32" height="32" alt="Warning" />
<h3 id="error">Server Not Found</h3>
<p id="desc">The page "http://localhost/iscroll.js" was not loaded because Dreamweaver could not find the server "localhost". Please make sure you are connected to the internet and the server name is correct.</p>
</div>
</body>
</html> -
Error message: The ITunes library file cannot be saved. There is not enough memory avalable.
Can anyone explain this to me me? and how to resolve it?
error message: The ITunes library file cannot be saved. There is not enough memory avalable.
I get this message, yet it looks like the media is in the library.trash stuff form your computers hard drive to free up space.
-
When I try to install Itunes64setup software in a w vista 64 notebook I get an error message "The application has failed to start because its side-by-side configuration is incorrect." Can you help me ?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
My computer no longer plays some purchases because it says my computer is not authorised but it is, but now Itunes say the cd is no longer available at the store, so I have paid for something but can not no play it.
Hi and welcome to the WD community.
Try to see if perhaps you are connecting the drive to a surge protector and it might not be getting enough power, try to connect the adapter directly to a power outlet on the wall to see if you get a different result. -
Why wont apple accept the fact that 4.0 is for iphone 4 and not for 3gs?
Having all those problems said with 3g/s running on iOS 4.X why wont they let us just downgrade back to 3.1.3 officially until they find a way on how to solve issues with 3g/s?
About the downgrade method of life hacker, if you're really not good in those things you might actually ruin your pc like my friend who tried it, she lost her wifi on her notebook, i had to help her find the installer of the driver again. this happened after she tried to install that libusb that is needed to run the application for exit recovery mode and other stuff.
Yes iOS 4.1 is out but contacts disappearing? And who knows what more problems it brings. I was even peeking around the iphone 4 forums it seems that they are not doing well either.
Anyway mine is all fine except that im afraid to use wifi or any apps that needs internet connection because everytime i do, my 3gs gets very very hot. I have already done the basic solution suggested by apple (factory reset, start from new iphone) but its still the same.
And another thing, the multitasking is getting annoying, you have to manually close all apps in the 'multitasking background' everytime you decide to quit an app. I guess they should put a 'Disable multitasking' or something like that.Firenzo wrote:
Why wont apple accept the fact that 4.0 is for iphone 4 and not for 3gs?
Because it works beautifully in the 3GS, with better battery life, faster operation and some great new features.
Having all those problems said with 3g/s running on iOS 4.X why wont they let us just downgrade back to 3.1.3 officially until they find a way on how to solve issues with 3g/s?
If you are having problems it is NOT from 4.0; there is something else wrong with your phone. There are plenty of troubleshooting tips in the forum if you look.
And another thing, the multitasking is getting annoying, you have to manually close all apps in the 'multitasking background' everytime you decide to quit an app. I guess they should put a 'Disable multitasking' or something like that.
NO YOU DO NOT. Those apps in the ribbon are not multitasking, they are suspended. You can ignore them and they won't hurt battery life or memory, unless they are streaming apps like Pandora.
It's amazing. For 3 years people screamed about the fact that the iPhone didn't support multitasking. Now they scream because the phone DOES multitasking. You can't win. -
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards. -
I am trying to communicate with a robotic arm which is attached to the parallel port.
and... ?
See:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=205&HUSERSHADE=0&HOID=5065000000110000006D070000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
2006 Ultimate LabVIEW G-eek. -
I have had my Airport Extreme for almost a year now. I have not been able to get it to work. It has never worked. I have tried everything in the apple manuals, my peripheral device manuals, and online help. My Airport Extreme Base Station has a completely dead USB port. The USB connector does have voltage and ground. Apparently there is no data transfer. I do not know how to test the data pinouts. I don't know if it is a software or driver problem, or if it is a hardware or wiring problem. My computer is a mid-2009 13" MacBook Pro. All of my external devices work well with the MacBook Pro. The USB functionality on the MacBook Pro has always performed without a glitch. It seems the problem with the Airport Extreme must either be a network communication problem or a hardware/hardwire problem. I bought the Airport Extreme to build a home inTRAnet network. I have a seperate 3rd party router for inTERnet. Contrary to what the manuals declare, the initial setup of my Airport Extreme requires inTERnet setup during the process. Even when the choice is made to limit the network access to LAN only, when I reach the end of the setup process, a prompts reads that the Airport Extreme may not function because I have not set it up for inTERnet with the WAN. Well, Dah... during the intial stages of the setup I told the machine to configure an inTRAnet only LAN setup. So... I went ahead and set it up for inTERnet and WAN. Either way, the USB port is not working. Then I set it up for the whole package, WAN, LAN, and everything. Still... no function out of the USB port. Any ideas?
P.S. The Ethernet works and so does the 802.11 tranceiver. The USB port is the only problem, but a major, major one for my needs. There is no peripheral functionality.Okay so I figured it out. I inherited the Configurator already set up so I didn't realize that our former administrator was brilliant and set things up a little differently. To anyone else who finds themselves in this spot try this:
After you plug the iPad in and open Configurator instead of trying to 'Prepare' the device click 'Assign'
There should be groups of Users listed on the left hand side of the screen.
Select the group you want the ipad to be a part of, or make a new group. ***Note a group can be one person so this is a good feature for teachers to have individual app assignements for students.
After you select the user group click the little plus ( + ) button on the bottom of the screen under the second column of info where names and device serial numbers should appear.
Type the name of the person, group, whatever you want to identify that assignment by into the blank that pops up after you hit the plus ( + )
Then select the assignment you just made and tohe 'Check Our' button at the bottom. At this point a box will pop up with a window at the top listing all devices supervised by Configurator. There is a tiny down arrow button that opens a scroll down menu to the right of this box. Click that, then select the device connected by USB as the one to assign.
The name of the assignment you gave it will show on the lock screen now and you can assign apps and profiles to the device like you would any other device in your Configurator inventory.
Good Luck. -
WebGate Error Report - The URL /access/sso is reserved for use by Oracle...
We are getting a 500 error on the web gates when logging in.
They have been working before, but are now reporting the error below.
2010/01/27@07:09:25.632239 18521 33 WEB ERROR 0x0000151F /export/build40/Oblix/coreid1014/palantir/commonlib/src/apache2_req_info.cpp:170 "WebGate Error Report" Message^The URL /access/sso is reserved for use by Oracle Access Manager and has been used with incorrect parameters. ReqReq^POST /access/sso HTTP/1.1 ReqProto^HTTP/1.1 ReqHost^p1uawbsv1.portal.internal ReqStatLine^ ReqStatus^200 ReqRawUri^/access/sso ReqUri^/access/sso ReqFilename^/u01/app/oracle/product/11.1.1/ohs1/instances/instance1/config/OHS/ohs1/htdocs/access ReqPath^/sso ReqArgs^
The configuration uses form based login
Details for Authentication Scheme
Level 1
Challenge Method Form
Challenge Parameter
creds:userid password
form:/oamsso/login.html
action:/access/sso
passthrough:no
SSL Required No
Challenge Redirect
Enabled Yesthanks,
the login post goes to /access/sso, but now i am getting 404 error /access/sso
Below is what I currently have the following in httpd.conf, which is the same as in a working environment.
The web gate policy resources include /portal and /public, but no mention of /access. How does web gate know how to intercept /access/sso?
[2010-01-28T10:50:42.9609+11:00] [OHS] [ERROR:32] [OHS-9999] [core.c] [host_id: p1uawbs02] [host_addr: 10.252.16.223] [tid: 18] [user: oracle] [ecid: 0000Pa_5qz3BP9s5Gj0Fyf0001rV00009_] [rid: 0] [VirtualHost: main] File does not exist: /u01/app/oracle/product/11.1.1/ohs1/instances/instance2/config/OHS/ohs1/htdocs/access
#*** BEGIN WebGate Specific ****
LoadFile "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/lib/libgcc_s.so.1"
LoadFile "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/lib/libstdc++.so.5"
LoadModule obWebgateModule "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oblix/apps/webgate/bin/webgate.so"
WebGateInstalldir "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access"
WebGateMode PEER
<Location /access/oblix/apps/webgate/bin/webgate.cgi>
SetHandler obwebgateerr
</Location>
<Location "/oberr.cgi">
SetHandler obwebgateerr
</Location>
<LocationMatch "/*">
AuthType Oblix
require valid-user
</LocationMatch>
#*******Default Login page alias***
Alias /oamsso "/u01/app/oracle/product/11.1.1/ohs1/oam/webgate/access/oamsso"
<LocationMatch "/oamsso/*">
Satisfy any
</LocationMatch>
#*** END WebGate Specific **** -
Hi all, simple question this one:
on the Apple TV what can the usb port be used for?
can I plug in a usb flash drive and transfer movie files, mp3's etc?
thanks, RobertThat port is intended for internal Apple usage and cannot be used by regular users without hacking the Apple TV.
(31091)
Maybe you are looking for
-
Stream video to multiple receivers
Hi, I saw a lot of posts in this categories, but really I coud not extract any clear answer from them. what I need to do is to send an audio/video stream through the internet to many users, these users are not of fixed numbers and IP addresses, so wh
-
Is it possible to get item details in column wise
Hi experts, Is it possible to get dynamic columns in alv report output
-
Photoshop elements 8 wont start error code 150:30
can someone help
-
Serialization using Base 64 and Hex Encoding... Which is Better
I have serialized an object and stored in one of the Database column's. I had 2 options to choose from; Option 1: Serialization into the database using Base 64 Encoder public static void write(Object obj, PreparedStatement ps) throws
-
Adobe PDF 8.0 printer keeps pausing (Leopard, Acrobat 8.1.2)
While running OSX 10.5 Leopard, the Adobe PDF printer, coming with CS3 design premium (driver 3016.102) keeps pausing without outputting any PDF, even after updating to version 8.1.1. Anybody knows the problem, or even better: the solution? settings: