Error 103 using Flash CS5.5 Air for iOS Settings exporter

This is currently discussed in another thread but I think this is a issue with AIR, maybe after I installed the new AIR version 2.6 and CS5.5 .
Anyone have a solution to this.?
http://forums.adobe.com/thread/853878

Looks like you got a solution on the other thread.

Similar Messages

  • How can I use a file in flash cs6 that I made in flash cs5.5 air for android

    I have made an app in in air for android in flash cs5.5 air for android, and I want to edit it in cs6 and play it in cs6.
    But if I put Ctrl+Enter I got an error: createWin process failed with error 2: system couldn't find the file. I think the problem is that I'am using air for android 2.6 version in flash cs5.5 and version 3.2 in flash cs6. I have searched the web and found out that you can add older air versions using the sdk manager and I have tried it but first I get the error that the version of the sdk I am trying to install is not valid and after some files that I added to the sdk folder I get this error:Only SDK higher than version 3.4.2540 may be added.
    I there a possible way to update the air for android for an fla or apk? Or how can I let my originally file work fine in flash cs6??

    system couldn't find the file
    If you can´t get a more specific hint why your project can´t compile then I can think of some reasons theis error might occur
    1.You had files included besides the swf, like videos, audio files, xml files, that are not present in the place air expects them to be
    2.somewhere in your createWin functions there is a class import needed that isn`t present in 3.2 anymore, for example some classes or functions from classes that were valid in 2.6 are not any more in 3.2
    3. to achieve better eror logging, allow for debugging in the publishing options and see what specific lines in your code throw the error
    4.any air app needs a cert file, this needs to be created once, if you migrated to e new system it might be you never created that file which air expects to even begin the compiling process
    once you isolate the problem, report back

  • Flash pro CS6 Air for iOS設定から"デバイスにインストール"の項目がなくなっている.

    以前より、Flash pro CS6のAir for iOSでの、実機へのインストールに不具合があり、原因が不明なため、
    Flash pro CS6自体を再インストールしました。
    その後、Air for iOS設定ダイアログを確認すると、「デプロイ」のページの最下部にあった、
    「アプリケーションをデバイスにインストールする」という旨の項目がなくなっていました。
    これは、Flash pro CS6のアップデートにより、新たにそのような仕様になったのでしょうか。
    それともこちらで何か必要な設定がありましたでしょうか。
    ご回答の程、よろしくお願いいたします。

    Flashメニューの「ヘルプ」→「アップデート」にて解消しました。

  • How to enable sampler in telemetry options at AIR for iOS Settings?

    Hi,
    I'm just trying the new Flash CC, and a very good feature is to monitor an iOS app using adobe scout.
    But when I export an app, in the AIR for iOS Settings, I always see "Enable sampler" option disabled. How can I enable the option?
    Thanks.

    Hi ,
    To enable the sampler option you need to set it in the Publish Settings dialog. Open the Publish Settings Dialog and select the "Enable detailed telemetry" option under the advanced section for the Flash(.swf) option.Now you will find the Telemetry option for enable sampler enabled in the AIR for iOS dialog.
    Thanks and Regards,
    Sudeshna Sarkar
    Adobe Flash Professional Team

  • CS5.5 Air for iOs - Which iOs versions are supported?

    Hi everyone,
    I wanted to test the functionalities of the Cs5.5 exporter for iOS, by exporting a previous Flash game i made on my 2G iPod, with 4.2.1 iOs version installed.
    Since i wouldn't want to pay for the iOS developer certificate just for trying, can anyone point out a solution for this?
    Moreover, is anyone sure it's gonna work? I wouldn't wanna spend good money just for seeing the Flash exporter is no good for my device.
    Suggestions?
    Anyone tried on similar OS?
    Thanks a lot
    Iacopo

    Ok, i managed to use a fake certificate (i know i shouldn't say that) just to check the feasability of a game on iOS and.... I found out that the exporter doesn't work on my iPod Touch 2G (iOs 4.2.1)!! It says the iPod is not supported!!
    Any news on this?
    Do i need to buy an iPhone 5 to test flash games? It sounds a little extreme....

  • Should I use Flash Builder to develop for iOS?

    We have a sizable AIR application built using Flash Builder 4.5 that is deployed on Windows and Mac. We tried to package it for Android and it simply failed to run at all. Apparently there are many namespaces not supported on Android. We've since stopping concerning ourselves with Android because the vast majority of our clients only care about iPad when it comes to tablets.
    So, the question I have that remains very elusive to me is: do I attempt to build an iPad version of our product on our existing AS3/Flex code base using Flash Builder, or should I port over to xcode and go native iOS? All the marketing I see surrounding Flash Builder says that you can build apps for iPad. But just how practical is this for anything more than trivial apps? Adobe AIR is supported on Android and it failed to work, which doesn't give me much confidence in trying to make this work on an iPad. Now that Adobe is moving away from Flex does it make any sense to even attempt this?
    What say you Adobe?
    Thanks
    Kevin

    autoplay can cause a tremendous amount of problems for site visitors. is it possible that adobe might turn off autoplay?

  • Air for iOS Settings dialog missing in Flash CS6

    Working on OSX 10.9.4
    I downloaded the AIR SDK 15
    In File->Publish Settings i set the target to AIR 15 for iOS
    When i click File->Air 15.0.0.302 Settings for iOS, the dialog never shows up
    It doesn't make any difference if i set the target to AIR SDK 3.2, or 4 that ship with CS6
    the dialog is gone
    How can i get it back?

    hi,
    Did you ever solve this problem? I get the same thing!
    Thanks
    Fed

  • AIR Debug Launcher Closes on Button Click in AIR for iOS test fla

    Hi,
    I'm working with a Flash CS5.5 AIR for iOS fla using AIR 3.0. Test Movie ---> AIR Debug Launcher (Desktop) worked as expected for a couple of weeks then suddenly began to malfunction. The debug launcher fires up correctly but anytime a button is clicked in the test movie, it closes (but does not shut down completely). I don't know if I've selected something by accident but I can't get it to stop. No problems testing in Flash Professional using an ordinary AS3 fla. Any ideas?
    Thanks!

    Relaxatraja, thanks for trying to help me with this. I've tried testing for Android and for iOS... here's an example of a mobile code snippet that doesn't work in the AIR debug launcher for a contact_mc button I've made.
    Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
    contact_mc.addEventListener(TouchEvent.TOUCH_BEGIN, fl_TouchBeginHandler);
    contact_mc.addEventListener(TouchEvent.TOUCH_END, fl_TouchEndHandler);
    var fl_DragBounds:Rectangle = new Rectangle(0, 0, stage.stageWidth, stage.stageHeight);
    function fl_TouchBeginHandler(event:TouchEvent):void
    event.target.startTouchDrag(event.touchPointID, false, fl_DragBounds);
    function fl_TouchEndHandler(event:TouchEvent):void
    event.target.stopTouchDrag(event.touchPointID);
    Am I missing something? Do I need to import classes? Can I only test Multitouch and gestures on an actual device?
    Thanks

  • Flash CS6 AIR for iOS 接続されたiOSデバイスにアプリケーションをインストールできない

    Flash Professional CS6 AIR for iOSにて、iPhoneアプリを制作～公開している者ですが、
    アップデート作業時、急にデバイステスト（接続されたiOSデバイスにアプリケーションをインストール）が出来なくなり、
    困っています。
    開発環境は以下の通りです。
    ・Flash Professional CS6
    ・Windows 7(32bit)
    ・AIR SDK：3.5.0.880 for iOS
    設定等は特に変えていないのですが、
    検証機のiPhone 5（iOS6.1.2）、iPhone 4(6.0.1)へクイックパブリッシュでインストールしようとすると、
    "Installation Error: ApplicationVerificationFailed
    デバイスエラー: デバイスに十分な容量があるか確認してください"
    というエラーが出ます。
    もちろんデバイス側には十分な容量がありますし、
    エラーの英文と和文も内容的に食い違っているように見えます。
    いろいろ調べて、以下の項目を試してみましたが、
    状況は変わりません。
    ・証明書(開発用)を再発行して読み込み
    ・プロビジョニングファイル(開発用)を再発行して読み込み
    ・Flash Professional CS6のアップデート
    ・AIR SDKを3.6.0.5990 for iOSにアップデート
    ・アプリケーションIDの変更
    これは何が原因でしょうか。

    "環境ファイル削除＋Flash CS6自体の再インストール→通常アップデート"にて、解決しました。

  • AIR for iOS: How can I distribute for only Retina Displays?

    I am nearing completion of an app I have designed for iOS and tested on my iPhone 4. I bought a 2nd gen iPhone so I could test on both screen resolutions (320x480 and 640x960) before discovering AIR for iOS does not support very old iOS devices (I believe the rule is it must be iOS 4+).
    My question is how is distribution handled if the app will not run on these older models? Wouldn't people with a 2nd gen iPhone still have access to an app that I publish via AIR for iOS and then be angry when it is not supported on their device? Has anyone run into this issue?

    AIR 2.5+ requires iPhone 3GS+ to run. It's based on the CPU inside that
    device and newer which includes a NEON SIMD coprocessor - a requirement
    of newer AIR builds on all platforms (newer than PFI/AIR 2.0, which
    shipped with Flash Pro CS5.0).
    There should be a "resolution" drop down in the AIR for iOS Settings
    dialog, if you updated your PFI in CS5.0 or upgraded to CS5.5. You can
    select "High" to get iPhone retina display support. This will not enable
    iPad 3 retina support though.
    Kevin N.
    Edit: I didn't make it clear that the device requirements are set in your app, and enforced by the App Store - users on old devices will never see your AIR apps in their app store, and if they link into the App Store, they'll get an explaination of why they can't install the app (it'll be either the OpenGL ES 2.0 requirement, or the CPU requirement - it's similar to if you try to install an iPad only app on an iPhone). Android actually works the same way - old/cheap ARMv6 device users will not see your ARMv7 requiring app in their Google Play/Marketplace app.

  • AIR for iOS 3.1 - App name no longer working?

    I have named my app "Someapp 123" and mysteriously the app continuously drops the "123" portion of the name. It used to appear just fine.
    Yesterday I noticed AIR3.1 was released and I overlayed that. Has anyone else overlayed AIR3.1? Notice your app name not completely working?
    FWIW it is an iPad-only app. The provision clearly states the name of the app is "Someapp 123". In AIR for IOS settings I have the "App Name" parameter set properly as well.

    My app name is a small word with a number after it, e.g. "Some 123". No ampersands or anything fancy.
    I did not know that it republished the XML if I published from the iOS panel but I even see hitting "OK" in that panel re-writes the XML file (because you need to put a password in for the p12 every time before publishing) and that overwrites it.
    I edited the re-created XML file, removed junk whitespace and changed my app name to a single word "Testapp". I publish with alt+shift+f12 typically which is the same as the file menu. I hit file->Publish anyhow and I can verify yes indeed it did not overwrite my XML file. Unfortunately the app was not named "Testapp", it was still named what I had named the SWF file. I verified the XML was not overwritten and it was not.
    I noticed there's a <name> and also a <filename>. The <filename> does not have SWF applied to it and there is also an attribute <content> which actually points to the SWF. I'm not sure why both <filename> and <content> exists but I went and changed the <filename> to the app title I wanted. So both <name> and <filename> are now "Testapp". I published with file->publish and low and behold, the name of the app is now "Testapp".
    Why would flash choose to use <filename> over <name>?
    Here is a full example of my XML file:
    <?xml version="1.0" encoding="UTF-8" standalone="no" ?>
    <application xmlns="http://ns.adobe.com/air/application/3.1">
      <id>com.mycompany.AppID</id>
      <versionNumber>1.4</versionNumber>
      <filename>Testapp</filename>
      <description/>
      <name>Testapp</name>
      <copyright/>
      <initialWindow>
        <content>MyFile.swf</content>
        <systemChrome>standard</systemChrome>
        <transparent>false</transparent>
        <visible>true</visible>
        <fullScreen>true</fullScreen>
        <aspectRatio>landscape</aspectRatio>
        <renderMode>gpu</renderMode>
        <autoOrients>true</autoOrients>
      </initialWindow>
      <icon>
        <image29x29>AppIconsForPublish/29.png</image29x29>
        <image57x57>AppIconsForPublish/57.png</image57x57>
        <image114x114>AppIconsForPublish/114.png</image114x114>
        <image48x48>AppIconsForPublish/48.png</image48x48>
        <image72x72>AppIconsForPublish/72.png</image72x72>
        <image512x512>AppIconsForPublish/t512.png</image512x512></icon>
      <customUpdateUI>false</customUpdateUI>
      <allowBrowserInvocation>false</allowBrowserInvocation>
      <iPhone>
        <InfoAdditions>
          <![CDATA[<key>UIDeviceFamily</key><array><string>2</string></array>]]>
        </InfoAdditions>
        <requestedDisplayResolution>standard</requestedDisplayResolution>
      </iPhone>
    </application>
    Anything in there seem odd? Again I'm using the AIR 3.1 SDK so I'm using that namespace. Anything I put in <filename> is now the app name, however in iTunes it continues to say "Unknown Ge..." which is pretty unprofessional. Although the icon works fine. When syncing I see the value in the <filename> field, as it will say "Syncing Testapp...".

  • Air for iOS, why isn't the setting for device being remembered?

    in flash CC with air3.7 and air3.8, everytime i open the general tab in the air for ios settings, the device is marked as iphone and ipad. i change it to iphone only, close the settings, save the file. when i open the settings again, i have to click on the general tab and the device is set back to iphone and ipad.
    i consider this a bug. this has never happened in any other version of air. i had to reject an apple binary when i noticed it was set to be a universal app, which it isn't, and had i not caught the error, i would've been waiting only to be rejected by apple...
    how can this be fixed? thanks

    iOS 7 apparently requires at least 512MB of RAM. The fourth generation iPod touch only has 256MB, and therefore won't get it.
    (89510)

  • Edit application settings AIR for iOS not working

    Hi all,
    I'm trying to create a .ipa so I can test my app on my iPhone but my Flash cs6 will no longer let me edit application settings so I can publish the file.
    The first time I did it, it was working fine. I added my certificate and my Provisioning Profile and published a .ipa file.
    Now, when I click the wrench tool icon or go through the file menu and select AIR for iOS settings, nothing happens. All it does is generate an .xml file for me ("filename"-app.xml).
    What is wrong and how can I fix this?
    I've tried rebooting.
    I have the same problem on Flash cs6 and Flash cs5.5 on two different computers.
    I have an iOS development Certificate.
    I have an iOS development Provisioning Profile.
    Thanks in advance for your help!
    Cheers,
    André

    Here's the link to the bug report in Adobe bugbase:
    Bug#3850040 - Flash CS6 crash
    Everyone PLEASE up Vote this bug ASAP!   (right side panel - under Attachments section)
    It's been 2 weeks since the bug was reported and it's status is still "unverified"...

  • Publishing AIR for iOS in Flash CS5.5 gives Java VM error

    Hi,
    I have been getting the following error when trying to publish AIR for iOS from Flash CS5.5. I'm using AIR 2.7 overlayed, Windows 7 x64.
    Any help would be greatly appreciated.
    Thanks!

    I tried overlaying the latest AIR as sinious suggested, but that only changed my error message by adding the line about ADT as in the original post.
    I was finally able to get the app to compile by calling adt from the command line.  Here is an example .bat file that worked for me:
    @echo=off
    @set java_cmd="C:\Program Files\Java\jre6\bin\java.exe"
    @set java_param=-Xmx128m -jar
    @set adt_cmd="C:\Program Files (x86)\Adobe\Adobe Flash CS5.5\AIR2.6\lib\adt.jar"
    @set target=ipa-test
    @set cert=iOS_dev.p12
    @set cert_pass=password
    @set provisioning=my_iOS_device.mobileprovision
    @set build_file=helloworld.ipa
    @set desc_files=helloworld-app.xml
    @set files=helloworld.swf AppIconsFolder
    %java_cmd% %java_param% %adt_cmd% -package -target %target% -storetype pkcs12 -keystore %cert% -storepass %cert_pass%  -provisioning-profile %provisioning% %build_file% %desc_files% %files%
    pause

  • Duplicate session error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with CF10

    We're getting the "duplicate session" error using Flash Remoting from Air 3.4 Mobile Apps ( IOS and Android ) with Coldfusion 10 Standard.
    faultCode:Server.Processing.DuplicateSessionDetected faultString:'Detected duplicate HTTP-based FlexSessions,
    generally due to the remote host disabling session cookies.
    Session cookies must be enabled to manage the client connection correctly.' faultDetail:'null'
    Have read most of the docs about this error -all to do with LCDS
    Notes:
    Not using LCDS,
    No Remote Calls from loaded Sub-Apps,
    No Errors from the Flex Web App which is pretty  much identical and calls the same cfcs.
    The error does not happen all the time and is hard to reproduce - say 5% of app sessions at a guess.
    Could it be a two first time remote calls hitting the server together before a session is set up?
    Our remoteObjects are in two places 1) Main Application.mxml and within a class compiled into the main app - can't see how this would be an issue.
    I enabled session management for the CFCs in Application.cfc but still occurs. Is this neccessary - it's not in any docs?
    Could this be something to do with the app not being shut down - as is typical with mobile users? When they resume use after a day or two surely a new session will be created?
    Please advise thank you.

    For our profect I think this issue was caused as follows:
    Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
    This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html  two remote calls arriving before a session is created will cause 2 sessions to be created.
    Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
    Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! )  caused the error when activated after a few hours.
    I guess the session expires on the server and the error above occurs on activation.
    So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
    All duplicate http errors are silently caught and reported.
    Fingers crossed we won't get any more!

Maybe you are looking for