Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.
Hello all,
I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
But in this case, when I run it, it shows the error that I have indicated in the subject line.
If you need more details about my project to identify the problem, please let me know.
Thanks in advance.
Solved!
Go to Solution.
-Please go through pattern matching example which comes along with labview fiirst
Go to labview Help>>Find Examples and you can search for example.
-You have create template with angle range and what type of pattern matching you want use.
-For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13
Similar Messages
-
Get an Error window, The source folder does not contain any supported camera raw files
I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
EstherHello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.
-
Error VF198 " The billing item does not contain a quantity"
Dear colleagues,
When I try to bill a sales order with a billing plan, I get this error message in the log at the time of invoice creation.
The billing plan itself consists of a line with date, value and other rules for downpayment and another one for the closing invoice.
The materials have prices and confirmed schedule line quantities in the sales order. Dates and values get copied from the billing plan and everything seems to be in order.
I get this message once in a while, not every time, but the investigations so far have been to no avail.
Thank you very much in advance for your suggestions!
Regards,
MiroHi
I request you to kindly check with your technical team,why it is happening sometimes.So check wheather the copy controls,billing plan has been set correctly or not.
Regards
Srinath -
"The selected file does not contain audio media ..."
I'm using Premiere Pro CC in Windows 7. A week ago I created a project using media from an external hard drive. I opened the project today to make changes to it, and a number of the .MTS files show up as missing. When I click on "Link Media" and locate the file -- which shows up as being on the external drive -- I get the following error message: "The selected file does not contain audio media used by clip references in one or more sequences. These audio clip references will be deleted, and cannot be undone. Do you want to continue?" I have canceled out of it because I do not want to damage my project irreparably, but I'm trying to determine the best course of action in re-linking these clips that are essential to the project. (I did apply a Left Fill to all the audio in the project, but I don't know if that would cause a problem, or if it did, how I could remove that effect. I've tried to re-link with several previous autosave versions of the project, only to get the same result.)
Try this:
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro? -
PropertyInfo does not contain a definition for 'GetCustomAttribute' ?
Hello,
I inherited a .Net 4 Asp.net web application . I did a build and got the error below. According to MSDN, PropertyInfo doesn't have a GetCustomAttribute method. (It does have a
GetCustomAttributes method). Am I missing a extension method? Or using wrong version of .net framework? Thanks, Peter
xxx= property.GetCustomAttribute<JsonPropertyAttribute>();
Error 1 'System.Reflection.PropertyInfo' does not contain a definition for 'GetCustomAttribute' and no extension method 'GetCustomAttribute' accepting a first argument of type 'System.Reflection.PropertyInfo' could be found (are you missing a using
directive or an assembly reference?) C:\projects\DotNetDemo\WebSite\CreateIncident.aspx.cs 357I think that you need a “using System.Reflection” and the .NET 4.5:
http://msdn.microsoft.com/en-us/library/hh194315(v=vs.110).aspx. -
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
Error: Schema to be handled does not contain a defintion of type
When I import a xsd file to create a data type in the integration repository, I am getting the error "schema to be handled does not contain a defintion of type <name_of_the_Data_Type>.
Any ideas
Thanks a lot in advance.
--KumarI am briging some vendor information from R3 system to XI thru IDOC. The IDOC Type is "CREMAS.CREMAS01".
I am able to import this into Integration Repository in XI. XI is translating this into XML.
Now insted of creating data types manually, I would like to export this XML into XSD and import into the data type.
When importing this XSD into data type I am getting this error message. -
Database does not contain a URL for the file
How do I find out what file/update this is:
The file digest/hash does not exist in the SUSDB, but I have no idea looking at the windowsupdate or softwaredistribution.log what file it is referring to.
SELECT [FileDigest]
,[DigestAlgorithm]
,[AdditionalHash]
FROM [SUSDB].[dbo].[tbFileHash] fh
WHERE fh.FileDigest =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
or fh.AdditionalHash =0x15B82F101E79C1E2181E43CC8A3CC137CBFDC91D
0 rows found
Softwaredistribution.log
2014-10-07 23:07:04.319 UTC Error w3wp.5 ClientImplementation.GetExtendedUpdateInfo System.ArgumentException: The database does not contain a URL for the file 15B82F101E79C1E2181E43CC8A3CC137CBFDC91D.
Parameter name: fileDigests
at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSpGetFileLocations(Byte[][] fileDigests)
at Microsoft.UpdateServices.Internal.DataAccessCache.GetFileLocations(Byte[][] fileDigests, DataAccess da)
at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
at Microsoft.UpdateServices.Internal.ClientImplementation.GetExtendedUpdateInfo(Cookie cookie, Int32[] revisionIds, XmlUpdateFragmentType[] fragmentTypes, String[] locales)
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()
at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)How do I find out what file/update this is:
Hows about.. rather than chasing a rabbit down the hole doing whatever you think you're doing...
We start with this: What problem is it that you're actually trying to solve?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code -
I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
have fixed the problem (of I don't understand the fix)
Configuration
SCCM 2012 SP1 5.0.7804.1000
WADK 8.100.26629.0 < Suggested Fix
Server 2008 R2
SCCM Administrator with UserID = SCCMAdmin
Steps / Fixes I have followed
I have configured a administrative share
\\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
SYSTEM has Full Control
<Suggested Fix
SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
Local Administrators (the local machine administrator) has Full Control
<Suggested Fix
<o:p></o:p>
Another Fix is to explicitly grant all permissions to the SCCM Administrator
<Suggested Fix
>Administrative Users ...
Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
Another suggestion I was able to glean was to Specify the Network Access Account
so I configured SCCMAdmin as the Network Access Account.
Another potential fix is that the image ISO file that has been downloaded is corrupt. So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
To double check,
I computed the Hash on the Install.WIM located in the Sources directory and compared with
the computed Has Tag for the Install.WIM on the ISO Image ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
I tried to load the images into SCCM 2012 using the "Operating System Installers" option
UNC to installer
\\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
Then I receive the lovely message <o:p></o:p>
"The specified path does not contain a valid operating system or you do not have permission to access it. Specify a valid path"<o:p></o:p>
<o:p> </o:p>
From
C:\Program Files (x86)\Microsoft Configuration
Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
<o:p> </o:p>
\r\nSystem.Management.ManagementException\r\nGeneric failure \r\n
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
errorCode)
at System.Management.ManagementObject.InvokeMethod(String
methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
at
Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
methodClass, String methodName, Dictionary`2 methodParameters, Boolean
traceParameters)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Failed to get the image property from the source WIM
file due to error 80070002";
ErrorCode = 2147942402;
File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
Line = 586;
Operation = "ExecMethod";
ParameterInfo = "SMS_OperatingSystemInstallPackage";
ProviderName = "WinMgmt";
StatusCode = 2147749889;
\r\n<o:p></o:p>
What am I missing ???? I assume something simple but, darn I'm stumped!!!Hi,
Configuration Manager version
Windows AIK or Windows ADK Version
Windows PE versions for boot images customizable from the Configuration Manager console
Supported Windows PE versions for boot images not customizable from the Configuration Manager console
System Center 2012 Configuration Manager with no service pack
Windows AIK for Windows 7
Windows PE 3
None
System Center 2012 Configuration Manager with SP1
Windows ADK for Windows 8
Windows PE 4
None
System Center 2012 Configuration Manager with SP1 and cumulative update 2
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11
System Center 2012 Configuration Manager with SP1 and cumulative update 3
Windows ADK for Windows 8
Windows PE 4
Windows PE 3.11 and Windows PE 5
System Center 2012 R2 Configuration Manager
Windows ADK for Windows 8.1
Windows PE 5
Windows PE 3.11
Please try to install the Windows ADK for Windows 8.
http://www.microsoft.com/en-us/download/details.aspx?id=30652
For more information, please review the link below:
http://technet.microsoft.com/en-us/library/gg682187.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi All,
I'm using SAP PO 7.31 single stack. I've created a simple BPM in NWDS. I'm able to successfuly build the BPM which I created but when I "Deploy" it throws the below error.
DC bpm_0/bl/caf/metadata does not contain any archives for deployment
DC bpm_0/bl/ddic does not contain any archives for deployment
DC bpm_0/bl/caf/dictionary does not contain any archives for deployment
Not sure what/where to check and fix the issue. Can you please help me in fixing the issue?
Thanks
Raj.Dear Raj,
I am looking into this.
In the meantime can you try this also.
xxx/pr/pm: Deployment error,&nbsp;GD&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&a…
Thanks & Regards,
Patralekha -
The jar size value in the Application Descriptor does not match the real ja
Hi,
when i creat obfuscated package for my application It's posing the
Error preverifying class A
Class loading error: Wrong name
The jar size value in the Application Descriptor does not match the real jar file size.
It's perfectly working for all the other applications .I tried to change the jar size in the jad file but it's not working.Yes, the obfuscator does not change the size value after finishing. You have to do it yourself.
Mihai -
Source not found: The source attachment does not contain the source for the file ClassLoader.Class
Hey,
I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
Exception in thread "main"
I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
Thanks in advance for your thoughts,
Struggling to RunOk...after I thought everything was going well enough.... problems are arising.
Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
with the two environments installed i thought i was ready fro the next step.
I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
1___________
java.lang.NoClassDefFoundError: couponCounter/CouponCounter
Exception in thread "main"
2__________
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
Syntax error, insert "}" to complete ClassBody
at BensCalculator.main(BensCalculator.java:112)
Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
Thank you -
The selected folder does not contain the current site's homepage
dreamweaver displays the following message when editting some
sites:
"WARNING: The selected folder does not contain the current
site's homepage. The site map cannot be built."
Then my remote info is cleared!
I know I'm obviously not doing something, but there is no
need to clear my remote info!!
edit: I've selected my home page, but this still doesn't
explain why Dreamweaver feels the need to erase my remote
info!!!> Then my remote info is cleared!
Huh?
This only means that you have not told DW which page is your
home page.
Find it in the local file list, and use the right-click
context menu to so
designate the file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:f2293h$7lg$[email protected]..
> dreamweaver displays the following message when editting
some sites:
>
> "WARNING: The selected folder does not contain the
current site's
> homepage.
> The site map cannot be built."
>
> Then my remote info is cleared!
>
> I know I'm obviously not doing something, but there is
no need to clear my
> remote info!!
> -
Error 1075: The dependency service does not exist or has been marked for deletion
Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support
Maybe you are looking for
-
Hi, i am getting following ALv. KUNNR BUY_CURR BUY_AMT SELL_CURR SELL_AMT AMT now i want subtotal and grand total based on curr, mens based on BUY_CURR and SELL_CURR. plz suggest. thanx
-
"about:config" is a tool for customization, what other "about" tools are there?
I previously came across an article that said that Firefox had other "ABOUT" commands that could be used in the navigation toolbar. what are they?
-
FlexConnect & ISE ACLs - AAA Overide/RADIUS NAC
Hi Chaps, I have 3 ACLs configured on a WLC for CWA, Corp and Guest users. On local mode APs, theses are called up using the Airespace fields in the ISE policies dependant on what rule is hit. ACL-WEBAUTH-REDIRECT ACL-PERMIT-CORP-TRAFFIC ACL-PERMIT-G
-
How to completely remove WSUS on Windows 2012 R2?
Hello guys, I see plenty of details about clean up previous version of WSUS, but I cannot find any place with more advanced details about the latest one. Mostly, people advice to completely reinstall the system from scratch. Any clue? Cheers, Marek
-
HT1937 please give me the email address in order to send you my problems
Dear Sir/Madam, Many thanks for your support. I update my iphone(iphone5) to ios7 with another itunes and another apple ID unfortunately. Now I have a problem with my itunes. whenever I started the itunes give this error that I should authorized this