ERROR: -1639 INVALID COMMAND LINE ARGUMENT

Trying to install software for Shuffle that Santa brought and get this error messsage...
"Error: -1639 invalid command line argument. Consult the windows Installer SDK for detailed command line help."
Install stops at this point.
SOMEONE HELP... My kid is chomping at the bit !
Thanks.

Ok I'll do some more searching but I found something in the community forums.
APPSearch can not return this data into a property, so instead, for some unspeakable reason, returns a value of Null, follwed by another Null. This means that the property is created, and populated with two null characters. Bad news if the property also happens to be a PUBLIC property. All public properties are passed as part of the command line sent in a stream to the background installer process by the Execute Action. Since this stream now contains a double null value in a property, the stream is prematurely terminated. This creates an invalid command line, and thus the 1639 error.
This user solved it by using the MSi Cleanup installer util.
EDIT: A little more info...
This problem is almost impossible to detect through the MSI log files since our friends at Microsoft chose to limit the length of any line in the log. It is impossible to get a dump of the full command line that generates this error.
EDIT2:Note that error 1639 only ocurrs when the install package is run from removable media. When the package is run from local storage, the behavior is far more obtuse. The background install process, failing to receive a complete command line, is forced to run as if there had been no UI session, which in turn causes the APPSearch action to run again as if the install was running in silent mode. This causes re-evaluation of all properties a second time, destroying the feature selections made in the UI session, and also forcing the install to run under user credentials instead of elevated, even though AdminUser, ALLUSERS and Privleged properties are set. This is a very serious error that causes total failure of the installation.

Similar Messages

Error message: "invalid command line argument" while lodaing itunes

I'm trying to load Itunes onto a computer that already has a version of itunes on it. I get a message that says "error: -1639 invalid command line argument" Does anyone know what this means? Does this mean I can't load itunes onto a computer that already has itunes on it?
Also, I was able to load itunes on my laptop, but My ipod Icon is not appearing anywhere, not in itunes, not in explorer, not in my computer. I am, however, able to transfer music automatically when I plug the Ipod into the laptop. I have created several playlists and they have transferred over to the ipod as playlists. Any ideas why I can transfer despite not being recognized anywhere on the computer?
Last thing is, I have plugged the Ipod into three different computers with itunes on them, and the ipod does not show up in the source list.
I'm somewhat perplexed by all of this. Any help or insight would be greatly appreciated
Dell Windows XP Pro

hiya!
"error: -1639 invalid command line argument"
hmmm. folks typically only get that error if they are installing from removable media (such as a CD), although i have seen it happen if someone tries to install into the "recovery partition" of certain makes of PC.
if you download and save an installer to your C drive and run the install from there, do you still get the 1639?
iTunes 6.0.4.2 Installer
love, b

Setup error 530 invalid command line!!!!??

hi guys,
i have the following error in my addon installation process
<i>"Setup error 530 invalid command line"</i>
all my files .ard and setup.exe was generated correctly but whene i try to install my addon
image capture
http://aycu19.webshots.com/image/13218/2000674717812036508_rs.jpg

Hi Manza,
What are you using to create your setup?
Have you tried the B1DE package? It contains 2 wizards to automatically create the setup of your addon together with the .ard file.
You can try to use it at least to use it as a sample of what is needed for your setup.
Are you setting something in the .ard Command Line arguments for installing/deinstalling your addon? Maybe the error is talking about it...
Regards
Trinidad.

Robot Test fails with error message Invalid command line: process must be

public class test
    public static void main(String [] args) throws Exception
        new java.awt.Robot();
}I'm using SLES Linux.
Is there any problem in my machine ?
How Robot tests generally works ?
Thanks !

try:
public class test{
    public static void main(String [] args) {
        try{
           java.awt.Robot myRobot = new java.awt.Robot();
        }catch(Exception e){
          System.out.println("It didn't work");
}from the API:
Note that some platforms require special privileges or extensions to access low-level input control. If the current platform configuration does not allow input control, an AWTException will be thrown when trying to construct Robot objects. For example, X-Window systems will throw the exception if the XTEST 2.2 standard extension is not supported (or not enabled) by the X server.

Error while running aiaconfig.sh - The command line argument(s) "weblogicConfig"

Hi.
We are Configuring PIP on AIA 11.1.1.7 after installing AIA PIP release. we we run ./aiaconfig.sh we are getting below error message,
$./aiaconfig.sh
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB.   Actual 169130 MB    Passed
Checking monitor: must be configured to display at least 256 colors.    Actual 16777216    Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2013-11-20_04-11-10AM. Please wait ...adevaia                                                        @soa-odi-dev1:/u02/app/Oracle/Middleware/AIAHOME/bin$ [WARN ][jrockit] MaxPermSize=256m ignored: Not a valid opt                                                        ion for JRockit
Log: /u01/app/oraInventory/logs/install2013-11-20_04-11-10AM.log
The command line argument(s) "weblogicConfig" or the install mode specified is not valid.
Copyright (c) 1999, 2011, Oracle and/or its affiliates. All rights reserved.
Usage:
config.sh [-mode] [-options] [(<CommandLineVariable=Value>)*]
Where mode include:
[Mode is a mandatory parameter. Only one mode can be specified.]
     -silent For silent mode operations, the inputs can be a response file or a list of
              command line variable value pairs.
Where options include:
     -help, --help, --usage
              Displays above usage.
     -invPtrLoc <inventory pointer file>
              Launches the installer with a custom inventory location. The invPtrLoc
              should point to a file which contains the following information.
              inventory_loc=<inventory_location>
              inst_group=<group_name>
     -response, -responseFile <response file>
              Specifies the response file and path to use.
     -jreLoc <location>
              Path where Java Runtime Environment is installed. OUI cannot be run without
              it.
     -logLevel <level>
              To filter log messages that have a lesser priority level than <level>.
              Valid options are: severe, warning, info, config, fine, finer, finest,
              basic, general, detailed, trace. The use of basic, general, detailed, trace
              is deprecated.
     -debug For getting the debug information from OUI.
     -force Allowing silent mode installation into a non-empty directory.
     -printdiskusage
              Log debug information for disk usage.
     -printmemory
              Path where Java Runtime Environment is installed. OUI cannot be run without
              it.
     -printtime
              Log debug information for time usage.
     -waitforcompletion
              For windows. setup.exe will wait for completion instead of spawning the
              java engine and exiting.
     -noconsole
              For suppressing display of messages to console. Console is not allocated.
     -ignoreSysPrereqs
              For ignoring the results of the system pre-requisite checks.
     -executeSysPrereqs
              Execute system pre-requisite checks and exit.
     -paramFile <location of file>
              Specify location of oraparam.ini file to be used by OUI.
     -novalidation
              Disables the validations, can be invoked along with GUI or silent mode.
     -nodefaultinput
              Disables the default computation of values (pre-populating of values when
              screen is loaded) in GUI install.
     -nocheckForUpdates
              To disable all updates checking
     -updatesDir
              To specify the directory where latest updates are downloaded. This could be
              used in disconnected mode.
Command Line Variables Usage:
          Command line variables are specified using <name=value>; for example:
              [ session: | session:compName: | session:compName:version: ]variableName=" valueOfVariable"]
          Installer variables are specified using:
              varName=value
              Ex: ORACLE_HOME=<value>
          OUI Session variables are specified using:
              session:varName=value
              Ex: session:VARIABLE_NAME=<value>
          OUI Component variables are specified using:
              session:compInternalName:[Version:]varName
              Ex 1: session:oracle.comp1:1.0.1:varName=<value>
              Ex 2: session:oracle.comp1:varName=<value>
              The lookup order is compInternalName:Version:varName, then compInternalName:varName
do anyone had any idea on this.
Thanks a lot,
RR.

try checking relevant environment variables like the CLASSPATH.... a major source of failures in Windows is when in the classpath there is a path containing SPACES.... also enabling some "debug" or "verbose" flag (not sure how to do it) would provide more insight...

Error message in scanning:"The scanning software was launched with improper command- line arguments"

We have downloaded and installed the HP Photosmart full feature Sostware and Drivers to Photosmart C3183 All-in-one.
Click the Scan document in Solution Center-
Error message displayed:
The scanning software was launched with improper command-line arguments"
Extended error information: 8,[(-1,0,0)]
When Hp scan diagnostic utility was used - the message was: no scanners installed.
how can we resolve the scanning problem
nidataytay

I have the same problem on a HP 5610 Officejet All-in-One.
"The scanning software was launched with improper command-line arguments.
8, [(-1, 0, 0)]"
What is the solution? The scanner does not work. All other functions, print, fax, copy work from with in the HP Solutions Center software - but not the scanner.

Pass dynamic Command line arguments

Hi,
I tried to pass dynamic command line argument to Web start using the method :
"javaws URL -D foo -D bar"
as explained in the "Unofficial JWS/JNLP FAQ" that " You can pass your own system properties to your app using -D switch ....", but I got the following error at the start;
error occurred while launching/running the application.
Category: Invalid Argument error
Too many arguments supplied: {http://...URL/my.jnlp, -Did=123 }
p.s. I already added the"<property name='' value=''/> in the <resourse>, and modified the main class to get the parameter using System. getProperty();
Did anyone try to this method before? What's wrong of this?
Thanks in advance for your help.

Thanks.
here below is the jnlp file:
<jnlp spec="1.0+" href="$$name" codebase="$$codebase">
<information>
<title>GUI Application</title>
<vendor>PS</vendor>
<description>PS GUI WebStart Version</description>
<icon href="logo.jpg" />
<offline-allowed />
</information>
<resources>
<j2se version="1.3" />
<jar href="lib/gui.jar" />
<property name="id" value="zbc" />
<jar href="lib/classes12.zip" />
<jar href="lib/j2ee.jar" />
<jar href="lib/jaas.jar" />
<jar href="lib/jce1_2_1.jar" />
<jar href="lib/jdom.jar" />
<jar href="lib/xerces.jar" />
<jar href="lib/local_policy.jar" />
<jar href="lib/log4j.jar" />
<jar href="lib/orion.jar" />
<jar href="lib/sunjce_provider.jar" />
<jar href="lib/US_export_policy.jar" />
</resources>
<security>
<all-permissions />
</security>
<application-desc main-class="GUIFrame">
</application-desc>
and in the main class "GUIFrame", i use System.getProperty("id") t get the parameter, if I hardcode the value of the "id" in this jnlp file and use javaws URL, everything's fine, but not the "javaws URL -Did=value" which will return the error as mentioned.
Thanks again for your help.

Read in file name + path using command line arguments

Hi guys,
I am trying to use command line arguments to read in the name of two files. The code below works as long as the files are on the class path.
public class cmdLineArguments {
     public static void main(String[] args) {
          String xmlFile1 = args[0];
                String xmlFile2 = args[1];
          System.out.println ("\nXmlFile1: " + args[0] + "\nXmlFile2: " + args[1]);
}I would like to be able to read files that are not on the class path as well by entering their full path along with their names.
In other words, It works if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs file1.xml file2.xmlbut not if I type:
C:\Documents and Settings\user\workspace\CmdLineArgs\src>java cmdLineArgs c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlWould anyone please explain how I can edit the code to make it work? I guess I could take them both as a String, modify them manually (add a \ to it etc) but is there an easier way to do it? Even a reference to a tutorial, article etc about this would be very much appreciated.
Also, any idea why a code would compile and run fine in Eclipse but would create an error from command line?
Thanks a lot.

You need to learn about cmd.exe which is used to process the command line. The arguments passed to any program is the command line split at white space so your command line arguments of
c:\Documents and Settings\user\desktop\file1.xml c:\Documents and Settings\user\desktop\file2.xmlis turned into an array of
"c:\Documents", "and", "Settings\user\desktop\file1.xml", "c:\Documents", "and", "Settings\user\desktop\file2.xml"In other words instead of 2 arguments you actually have 6.
To get round this the file names need to be quoted
java cmdLineArgs "c:\Documents and Settings\user\desktop\file1.xml" "c:\Documents and Settings\user\desktop\file2.xml"

Executing another program with command line arguments

I am very new to Java, so bare with me.
I have written an encryption/decryption program in C (that accepts command line arguments of the key, mode (encrypt/decrypt), and file), and I have written a GUI for it in Java. It accepts the filename (and has a button which opens the "File/Open" dialog), key, and mode, and has a button to Start the process of the encryption. I'd like for that "Start" button to call my encryption program in C (eep.exe) with the command line arguments of the file, key, and mode. This is what I have written so far :
Start = new JButton("Start");
Start.setBounds(150, 180, 90, 25);
Start.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
Desktop.open(new File("C:\\eep.exe" + " " + filename + " " + mode + " " + key));
However, I get the error "Cannot make a static reference to the non-static method open(File) from the type Desktop" on the Desktop.open command.
What should I do? Is Desktop.Open the right way to go about this? If not, what is the right way to go about it?
Thanks in advance.

That has helped greatly, but I cannot pass command line arguments to it.
Using :
try {
    Desktop.getDesktop().open(new File("C:\\eep.exe"));
catch (Exception e) {
   System.out.println("Error executing.");
}I can execute eep.exe, but when I try to pass command line arguments to it, such as
Desktop.getDesktop().open(new File("C:\\eep.exe" + " " + filename));it fails, get caught and prints "Error Executing."
I have also tried loading the program, as well as some command line arguments into an array of strings :
String[] cmdArray = {"C:\\eep.exe", filename};
Desktop.getDesktop().open(new File(cmdArray));But it gives me the error "The constructor File(String[]) is undefined" on the
new File (cmdArray)part of the command.

Command Line argument is not valid please verify the switch.......???

hello frends
We are currently getting this error.
Command Line argument is not valid please verify the switch.
The code used to send the mail is
mail ="mailto:?subject="+escape(subject)+"&body="+escape(email);
document.location = mail;
return ;
this is a javascript code to open outlook mail to send emails.
the main problem is,when we write
mailto:?subject=abc&body=uvwxyz......
then we should be getting abc as subj and uvwxyz as the body..,and we r getting it....
but when we include ""(double quotes ) in either the subject or the body..,it is showing the error line mentioned above.
and if em using the html tags in the body part..,it's giving everything including the tags,which z not desired.
kindly help me .....

shikha6g wrote:
i've thought..,you people are brainy enough to help me out in the javascript too...!!so..,i relied on this forum and have posted my problem,coz solving this thing was really imp for me.
i din't knew,dat i'll get such circastic replys here.sorryTo me, being brainy implies that you are a smart thinker and good at problem solving. It doesn't mean that you know a language that you never learned.

Command line arguments with a Labview pda application

Hi Everyone,
I am in the process of writing some Labview code to run on a PDA that is called from another vendor's software. When called, I need to pass some information to it (in the form of an integer) and then return an error code when it has finished its task (again, as an integer).
Not being able to compile a my application as a labview dll for to run on a PDA with Windows Mobile 2003, I was hoping to be able to pass command line arguments to my program when compiled as an executable. This doesn't seem to be possible.
Could someone please confirm that Labview PDA applications do not support command line arguments?
Any suggestions on how to meet my objective would be most welcome .
Regards,
Mark

Paolo,
Thanks for your input: storing this information in a text file is a choice we are looking at. But it does leave us with the problem that the vendor's software will not necessarily know when our program has finished running, unless it continuously polls the file to see if there has been any update.
A dll would be ideal. I was hoping there might be a clever way of emulating this.
Regards,
Mark.

Help with char and command line arguments

I am writing a program that takes 2 command line arguments (such as 4 b, or 3 4, etc.). It uses the first argument to determine the height of a triangle (how many rows high), and the second is the character with which the triangle is drawn.
My problem is I tend to code backwards - go for the bigger part and then figure out the smaller things. So, I've written a program that prints out this triangle, BUT I can't figure out how to get the command line arguments into it properly. A number works fine because I can:
size = Integer.parseInt(args[0]);
but what do I do if the second argument is a character? Args is a String array (I've been fighting with it for the past 4 hours, so I KNOW its a String array) - so how can I get a char to be read as args[1]?
Here is my code before adding in the second argument (the char):
public class Triangle
public static final void main(String[] args)
int size;
if (args.length > 0)
try
size = Integer.parseInt(args[0]);
catch(NumberFormatException e)
System.out.println("Input Error");
createFilledTriangle(size);
System.out.println();
public static void createFilledTriangle(int size)
int i = 0;
int j = 0;
for(i = size, j = 1; i > 0; i--, j +=2)
printChar(" ", i);
printChar("*", j); <-----Instead of using * I want to use the second command line arg
System.out.println();
private static void printChar(String str, int total)
for(int i = 0, i < total; i++)
if(i%2 == 1)
System.out.print(str);
else
System.out.print(" ");
Thank you for any help in advance!

I was sure i send it the other day, i probably send it to the wron guy.
This will give you more idea about drawing.
import java.awt.*;
import java.awt.event.*;
public class Args extends Frame
     Panel panel = new Tpan();
     int   arg1;
     char arg2;
public Args(int a1, char a2)
     super();
     arg1 = a1;
     arg2 = a2;
     setBounds(1,1,600,400);
     setLayout(new BorderLayout());
     addWindowListener(new WindowAdapter()
     {     public void windowClosing(WindowEvent ev)
          {     dispose();
               System.exit(0);
     add("Center",panel);
     setVisible(true);
public class Tpan extends Panel
public Tpan()
public void paint(Graphics g)
     super.paint(g);
     g.setColor(Color.blue);
     g.drawLine(120,110-arg1,80,110);
     g.drawLine(120,110-arg1,160,110);
     g.drawLine(80,110,160,110);
     g.setColor(Color.red);
     g.drawLine(120,110-arg1,120,110);
     g.setColor(Color.black);
     g.drawString(""+arg2,116,110-arg1/2+10);
public static void main (String[] args) throws InterruptedException
// get the 2 arguments from the args insread of a1= , a2=
     int a1 = 60;
     char a2 = 'a';
     new Args(a1,a2);
Noah
import java.awt.*;
import java.awt.event.*;
public class Args extends Frame
     Panel panel = new Tpan();
     int arg1;
     char arg2;
public Args(int a1, char a2)
     super();
     arg1 = a1;
     arg2 = a2;
     setBounds(1,1,600,400);
     setLayout(new BorderLayout());
     addWindowListener(new WindowAdapter()
     {     public void windowClosing(WindowEvent ev)
          {     dispose();
               System.exit(0);
     add("Center",panel);
     setVisible(true);
public class Tpan extends Panel
public Tpan()
public void paint(Graphics g)
     super.paint(g);
     g.setColor(Color.blue);
     g.drawLine(120,110-arg1,80,110);
     g.drawLine(120,110-arg1,160,110);
     g.drawLine(80,110,160,110);
     g.setColor(Color.red);
     g.drawLine(120,110-arg1,120,110);
     g.setColor(Color.black);
     g.drawString(""+arg2,116,110-arg1/2+10);
public static void main (String[] args) throws InterruptedException
// get the 2 arguments from the args insread of a1= , a2=
     int a1 = 60;
     char a2 = 'a';
     new Args(a1,a2);

Setting Command Line Arguments for my Class

HI,
How do I set the command line arguments for my debug class. For example , I would like my user to type :
java Debug -LEVEL1
What should I do to implement this behaviour.
Thanks in advance...

     public static void main (String[] args){
          if(args.length > 0){
               int j = 0;
               BMsearch search = new BMsearch();
               try{
                    while (j < args.length){
                         if(args[j].equalsIgnoreCase(ONE_PATERN)){
                              search.addPaternForSearch(args[j+1]);
                              j = j+2;
                         else if (args[j].equalsIgnoreCase(PATERNLIST)){
                              j++;
                              while( ! (args[j].startsWith("-")) ){
                                   search.addPaternForSearch(args[j]);
                                   j++;
                              }//end while
                         else if (args[j].equalsIgnoreCase(PATERNFILE)){
                              j++;
                              search.readPaternFile(args[j]);
                              j++;
                         else if(args[j].equalsIgnoreCase(MATCH_H)){
                              search.heuristic = MATCH_HEURISTIC;
                              j++;
                         else if(args[j].equalsIgnoreCase(MATCH_H2)){
                              search.heuristic = MATCH_HEURISTIC_TWO;
                              j++;
                         else if(args[j].equalsIgnoreCase(OCC_H)){
                              search.heuristic = OCC_HEURISTIC;
                              j++;
                         else if(args[j].equalsIgnoreCase(COMB_H)){
                              search.heuristic = COMBINED_HEURISTIC;
                              j++;
                         else if(args[j].equalsIgnoreCase(JAVA_S)){
                              search.heuristic = JAVA_NATIVE;
                              j++;
                         else if(args[j].equalsIgnoreCase(TEXTFILE)){
                              j++;
                              search.readFileIn(args[j]);
                              j++;
                         else if(args[j].equalsIgnoreCase(TEXTURL)){
                              j++;
                              search.readURLFileIn(args[j]);
                              j++;
                         else if(args[j].equalsIgnoreCase(STOPatFIRST)){
                              search.searchall = false;
                              j++;
                         else if(args[j].equalsIgnoreCase(STOPatLAST)){
                              search.searchall = true;
                              j++;
                         else if(args[j].equalsIgnoreCase(VERBOSE)){
                              search.verbose = true;
                              j++;
                         else if(args[j].equalsIgnoreCase("-h") || args[j].equalsIgnoreCase("-help")){
                              printHelp();
                              Start = false;
                              break;
                         else{
                              System.out.println(" Error while parsing Parameter. ");
                              System.out.println(" type java BMsearch -help for all Options");
                              Start = false;
                              break;
                    }// end outer while
               catch(Exception e){
                    System.out.println(" Error while parsing Parameter. ");
                    System.out.println(" type java BMsearch -help for all Options");
                    Start = false;
                    j = args.length;
               if(Start){
                    if(search.verbose)System.out.println(" Parameter parsed, beginning with search ...");
                         search.starttimeTotal = System.currentTimeMillis();
                    search.search();
                    search.stoptimeTotal = System.currentTimeMillis();
                    System.out.println(" Whole search took: " + (search.stoptimeTotal - search.starttimeTotal) + " milliseconds.(Brutto) ");
          else{
               System.out.println(" Error while parsing Parameter. ");
               System.out.println(" type java BMsearch -help for all Options");
     }//end MAINThis is takem from one of my command line classe (a Boyer Moore Pattern-Matching application from an exercise). I don't know if this is the best way, but thats what I have done there for passing some arguments, where the order of them isn't pre-given (you can pass the params in the order you want).
The CAPITAL vars are pre-defined final Strings holding the param-names, e.g.
public static final String ONE_PATERN = "-p";
public static final String PATERNLIST = "-plist";
public static final String PATERNFILE = "-pfile";Another trick sometimes used in Linux/Unix, if you have only false/true combinations, are numbers from pow 2 (2,4,8,16). In C they are used because of the binary representation, but it has some benefits. E.g. a value of 2 (0010) and another true set on 4 (0100) results binary in 6 (0110), so you can mix parameters in only one value, and with a byte - array you could check, if the flag for a given param is set. But this way is a little tricky for the end-user.

Need Help with command line arguments for a class method

Hey guys,
I'm fairly new to programming in java.
I want to a write a class method that adds up its command line arguments which are numbers. For example, if the input was .... 5 2 3....then the output would be 10.
I have been told to use the Convert to convert a string to a double. I'm ok for writing the class method but I have no idea how to use Convert and why I need it in the method.
Can anybody help please?

Hey guys,
I'm fairly new to programming in java.
I want to a write a class method that adds up its
command line arguments which are numbers. For
example, if the input was .... 5 2 3....then the
output would be 10.Okay. So you would receive the numbers to add as the String[] argument to a main method. The steps are simple:
1) declare a variable for the count
2) for each String in the array:
2.1) extract the value as a double
2.2) add this to the count
3) output the resulting count
I have been told to use the Convert to convert a
string to a double.
I'm ok for writing the class
method but I have no idea how to use ConvertThere is no class Convert in the Java API.
and why
I need it in the method. Do you understand you need to somehow convert each String to a double (step 2.1)? Since Convert is unknown to me, maybe you should just take a look at class Double. It can help you do step 2.1, the rest should be trivial enough.
http://java.sun.com/j2se/1.5.0/docs/api/java/lang/Double.html
Give it a go and feel free to post back with a specific problem you are having, accurately described if you please :-)

How to run command line argument programe

Hi guys, I am doing pass command line argument programe in java but I don't know how to run this programe. Path for this programe in my my computer is C:\Users\Desktop\Mainjava\mycode\CommandProgjava*
{code/}
public class CommandProg
public static void main(String[] args)
System.out.println("d");
for (int i = 0; i < args.length; i++)
System.out.println(args);
{code/}
Where i need to go and what command i need to give so i can execute this programe(I am using window vista). I only know i have to give
this command some where CommandProg arg1 arg2 arg3 arg4. Output should be
Output:
arg1
arg2
arg3
arg4
Please help me, Thanks in advance.
Edited by: JayVirk on Dec 30, 2007 11:33 AM

Jay,
Your question isn't very clear, hence Joerg's well meaning but irrelevant advise.
Do you mean:
I've written a simple program in java which echos
it's command-line arguments to back to the console.
Here's my code:
package forums;
public class ArgsEchoer
public static void main(String[] args) {
for (String arg : args) {
System.out.println(arg);
But can't figure out how to compile and run the program.
I'm using winblows shista, and it's cr@p.
Please help me, Thanks in advance.So... where are you at? Have you installed the JDK (java development kit)? Which version? Is your path set? Is your classpath set?
Start here: http://java.sun.com/developer/onlineTraining/new2java/

ERROR: -1639 INVALID COMMAND LINE ARGUMENT

Similar Messages

Maybe you are looking for