Error message in scanning:"The scanning software was launched with improper command- line arguments"

We have downloaded and installed the HP Photosmart full feature Sostware and Drivers to Photosmart C3183 All-in-one.
Click the Scan document in Solution Center-
Error message displayed:
The scanning software was launched with improper command-line arguments"
Extended error information: 8,[(-1,0,0)]
When Hp scan diagnostic utility  was used  - the message was: no scanners installed.
how can we resolve the scanning problem
nidataytay

I have the same problem on a HP 5610 Officejet All-in-One.
"The scanning software was launched with improper command-line arguments.
8, [(-1, 0, 0)]"
What is the solution? The scanner does not work. All other functions, print, fax, copy work from with in the HP Solutions Center software - but not the scanner.

Similar Messages

  • HT1212 How do i restore my iphone when it has been disabled and can not be restored through itunes because of the error message that says "The iphone software update server could not be contacted.

    How do i restore my iphone when it has been disabled and cannot be restored through itunes because of the error message that says "The iphone software update server could not be contacted

    Have you jailbroken this device? This will make the iPhone not talk to the Software Update Server (that signs and accepts software updates) please refer to the following link? Error 3194, Error 17, or "This device isn't eligible for the requested build"
    The iPhone will talk to the software update servers, just need to change the host files, it's a simple process, sorry if you were confused about the wording in to top?

  • Today, after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    Today,  after having published my website without difficulty for years, I got an error message saying that the file format was unrocognized.  Anyone have any suggestions.

    You need to give some more info.
    How are you publishing your site - iWeb FTP or another application? If the latter, is the encoding set to Unicode (UTF-8)?
    Who is giving you this message - the server?

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • I have Nuance PDF Converter 7.2 and after I scan a document and want to email it, I get an error message that says the scan cannot be attached to an email.

    I want to be clear: I can scan the document with Nuance PDF Converter 7.2, but after the scan, I want to email the scan to someone.
    When I click on the word "email" on the left side of the Nuance screen, I get a failure message. For a couple of years this process worked without a problem. I was told by Nuance Support that the problem was in the email software. Is there something on a drop
    down menu that I can click on the resolve the problem? Thanks.

    The problem could be that your computer doesn't have Thunderbird identified as the default e-mail program, so the first step is:
    Thunderbird: Menu bar: Tools: Options: Advanced Tab: System Integration:
    Press the "Check Now..." button.
    In the resulting "System Integration" window, make sure that "E-Mail" is check-marked, and "Always perform this check when starting Thunderbird" is checked. Then click the "Set as Default" button.
    If you have Windows 8 or 8.1, then there is also another step:<br>
    Windows Control Panel: Programs: Default Programs: Set your default programs.<br>
    Find "Thunderbird" on the left side, and click to select it.<br>
    On the right side, click "Set this program as default".<br>
    Then reboot the computer.<br>
    If the problem still exists, then do a clean install of Thunderbird:
    Certain Thunderbird problems can be solved by performing a ''Clean reinstall''. This means you remove Thunderbird's program files and then reinstall Thunderbird. Please follow these steps:
    #Download the latest version of Thunderbird from http://www.mozilla.org/en-US/thunderbird/ and save the setup file to your computer.
    #After the download is complete, close all Thunderbird windows (Click Exit/Quit from the menu button on the right).
    #Delete the Thunderbird installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #** C:\Program Files\Mozilla Thunderbird\
    #** C:\Program Files (x86)\Mozilla Thunderbird\
    #*'''Mac:''' Delete Thunderbird from the Applications folder.
    #*'''Linux:''' If you installed Thunderbird with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Thunderbird on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/en-US/thunderbird/ Thunderbird Download Page], simply remove the folder ''thunderbird'' in your home directory.
    #Now, go ahead and reinstall Thunderbird:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to open Thunderbird after clicking the Finish button.
    <b>WARNING:</b> Do not run Thunderbird's uninstaller or use a third party remover as part of this process, because that could permanently delete your Thunderbird data, including but not limited to, extensions, emails, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
    Please report back to see if this helped you!

  • HT1296 Help! I failed to back up the data on my iphone 4 16gb using iTunes Version 11.01. The error message read that the back up was corrupt. I am suppose to delete the back up. Can someone help me? I urgently need to back up the data!:\

    Hi guys!
    I really need help. I tried to back up the data on my iphone 4 on the iTunes version 11.01 but failed.
    The error message read : the backup was corrupt or not compatible with iPhone. can anyone advise me on this,
    as I urgently need to back up my phone in anticipation for my iPhone 5.
    Greatly appreciated!

    this usally happens when the backup you tool was from an old ios version. Two options that you can try is
    1.  Delete the back up by going to edit> preferences> devices & delete back up on itunes & try backing up again
    2.  Update the ios software of the iphone4 & then take a back up. then try restoring
    Taz

  • HT201210 I get an error message that says the iPad software update server could not be contacted.  How do I fix that?

    I am trying to upgrade my iPad from version 4.3.5 to the new 5.0.1 and I get the above error message.  It says, The iPad software update server could not be contacted.  I also do not have an Update button when I go into Settings and General.

    You must have ios 5 or later for that facility to show up. Meanwhile, keep trying /try later via iTunes on your computer..

  • Hi my 3rd gen iPod nano is not connecting to iTunes - the error message says there is missing software to communicate with the device. I am running iTunes 10.4 on XP and I have tried all the troubleshooting routes to no avail - anybody help me out?

    I can't get Itunes to communicate with my 3rd gen Nano - I've reinstalled iTunes several times but still get the same error message for both mine and my wife's ipod - same version of 3rd gen. All the troubleshooting guide has been followed but still not connecting.
    Any ideas?

    Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
    There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok.

  • I purchased and downloaded a movie and when I it backed up to my computer it changed something and now when I try to watch the movie I get an error message that says "The request URL was not found on this server.? What do I need to do to correct it?

    I purchased a movie and downloaded it and when I conected my I Pod to my computer, now I get a message "The requested URL was not found on this server".   What do I do to fix it?

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Unable to restart the Microsoft Software Protection Platform service from command line - Win81 MS Office 2013 SP1

    I'm unable to restart the Microsoft Software Protection Platform service on a Windows 8.1 laptop for MS Office 2013 SP1 (32-bit) using the following command:
    cscript ospp.vbs /osppsvcrestart (issued from C:\Program Files (x86)\Microsoft Office\Office15)
    When this is run, a window appears with the title ospp.vbs and the text "Error: The Software Protection Platform service is not installed"
    I verified that the service is installed in services.msc, and was able to manually stop and restart the SPP service in the Services console without issue.
    The command runs correctly when restarting the MS Office 2013 SPP on Windows 7 devices.
    Has anyone else seen this or have a solution for it?
    The reason that I am attempting to restart the service from the command line is because this command is part of a script to change the KMS server IP Address used by OSPP prior to software activation.
    The only other options that I have at this time is to ask the users to reboot, or manually force a reboot.  This is both time consuming and disruptive to the users.
    The Fix It tool to remove MS Office 2013 was run, and the MS Office 2013 software was successfully reinstalled after a reboot.  The software was successfully activated.  When the command was run, it produced the same exact error.

    Hi,
    I am able to reproduce this on my own machine, but in my case, I don't see the specific service running in the Services console. 
    I would like first confirm that whether you've the right service running on your Windows 8.1 system. The display name of this service should be "Office Software Protection Platform", service name is "osppsvc".
    You can also check this by going to below path where you should see the executable file (OSPPSVC.EXE) if the service is installed on your system (in my case, the folder is empty):
    C:\Program Files\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • HT4061 I had purchased two movies and several iTunes music and since installing the updated ios6, I am unable to view the movies. It keeps send an error message stating that "the request URL was not found on the server" also the music purchased wont play.

    As with the music, it just scrolls rapidly through my play list nut not playing any songs.....

    I've had the same problems -- latest version of Mac OS and iTunes. Content plays on my iPhone, but I get the grey screen and message telling me to authorize. I even deauthorized the computer and reauthorized it to no avail.
    And it is the right apple account.

  • Help! I am unable to get Boot Camp to recognize my Windows disc; whether I use USB, DVD, CD whatever, I get an error message to insert the Windows Software and wait. HELP please!

    Like I said in my headline, I simply cannot get Boot Camp Assistant to recognize my Windows Software, no matter what method I use. I don't know if I'm not making it mountable or what. Any and all help would be greatly appreciated.
    Thank you in advance,
    Brandon

    Welcome to Apple Support Communities
    Simply skip Boot Camp Assistant and create the Windows partition with Disk Utility > http://pondini.org/OSX/DU3.html Select "MS-DOS (FAT)" as "Format", and apply the changes. By security, choose "BOOTCAMP" as the name of the partition.
    In fact, the only thing that Boot Camp Assistant does is to help you create the Windows partition and download the Windows support software.
    Before creating the partition, open Boot Camp Assistant, tick only the option to download the Windows support software and burn it into a USB drive. You will need it later. Then, make the partition as described above.
    Finally, insert the Windows DVD, restart and hold the C key while your Mac is starting. Since here, you can follow the Apple's steps > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf Remember to choose the BOOTCAMP partition when the installer asks you to format it.
    After installing Windows, insert the USB drive and install the Windows support software

  • Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

    I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

    Hi, reagans3.
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues with iMessage.  I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    Jason H.

  • How to add command line arguments to shortcuts in the LV8.5.1 installer

    I want to create multiple shortcuts to my LV program, each with different command line arguments.
    I can do this manually.
    I want the installer to generate these shortcuts.
    I can add different shortcuts in de installer build specification, but I cannot add commandline arguments in the shortcuts.
    Does anyone know how to do this?
    Rindert 

    Hello Forum,
    Does anyone have any better data for this?  I would also like to create an installer using Labview Project Explorer tool (Build Specification->Installer), and I have a need to create some shortcuts to some EXE's (VS.NET built, not LV) which need to have some arguments passed.  I just verified that LV8.6 still does not seem to offer the option of passing arguments when creating shortcuts.  Is this correct?   Creating stub EXE's or batch files isn't a good option for my project, so I'd like to have someone confirm if LV installer tool can't create shortcuts w/ arguments before I fire up InstallShield.
    Regards!

  • I am using adobe photoshop elements 10.  my scanned photos. It scans the photo but an error  message comes up that says Nothing was imported because this picture already exist. However these are pics I have  never scanned before. Please--I have way too ma

    Adobe elements 10 Photoshop will not import my scanned photos.. I keep getting an error message that says the photo already exist. But I know that these photos have not been scanned in the past. They are not in my library.  The person in chat says I should come here to the forum and my question will be answered. 

        I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
    Thank you,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

Maybe you are looking for