Error 20003 LV 7.1

Hi
I am using a USB DAQ 6008 for continuous reading of some voltage values
from a circuit. I configured an AI voltage task for 2 input channels,
one of which was then filtered and the result displayed. Everything
worked fine upto this point. But when I reconfigured the task to
include 2 more input channels (continuous voltage measurement) I began
to get this error message "20003: No: of samples should be >0" at the
filter block... although I have entered a value of 5000 in the no: of
samples/channel attribute of the DAQmx Read VI. Can anyone help me out
with this?
Thanks in advance
AK

Hello AK,
I think it would be easiest for us to help you if you could post the portion of your code that exhibits this behavior.
Thanks,
Laura

Similar Messages

SQL error -20003 at location stats_tab_collect-20

Hello All,
we are executing ths statistics with the followin command
brconnect -u / -c -f stats -t all -f collect
but the proccess report errors like:
BR0301E SQL error -20003 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCMVWPRO"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14457
ORA-06512: at "SYS.DBMS_STATS", line 14477
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCMVWPRO
BR0301E SQL error -20003 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCTRGI"', ESTIMATE_PERCENT => 1, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14457
ORA-06512: at "SYS.DBMS_STATS", line 14477
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCTRGI
How we can fix this error?
Thanks
Hernando

hello, to update, I receive the following recommendation
The error "ORA-20003: Specified bug number (5099019) does not exist
seems caused by fix of bug 5099019 is not installed correctly.
Could you please first check if the merge fix 8299095 has been
installed successfully? Check lsinventory and check if the post
installation steps have been performed well.
Post-install steps:
startup database
connect using sqlplus as SYSDBA
start $ORACLE_HOME/rdbms/admin/dbmsstat.sql
start $ORACLE_HOME/rdbms/admin/prvtstas.plb
start $ORACLE_HOME/rdbms/admin/prvtstat.plb
exit sqlplus
Once those steps have been performed would you please check the databasefor invalid objects per the instructions in OSS note 648203?
I followed the steps in recommendation:
the fix is installed on patch 8599814.
I started the DB and ran the SQL scripts:
SQL> start $ORACLE_HOME/rdbms/admin/dbmsstat.sql
Package created.
No errors.
Synonym created.
Grant succeeded.
create role gather_system_statistics
ERROR at line 1:
ORA-01921: role name 'GATHER_SYSTEM_STATISTICS' conflicts with another
user or
role name
Grant succeeded.
Grant succeeded.
Library created.
SQL> start $ORACLE_HOME/rdbms/admin/prvtstas.plb
Package created.
No errors.
Package body created.
No errors.
SQL> start $ORACLE_HOME/rdbms/admin/prvtstat.plb
Package body created.
No errors.
PL/SQL procedure successfully completed.
According to note 648203 I search for invalid objects
SQL> SELECT SUBSTR(OWNER, 1, 20) OWNER,SUBSTR(OBJECT_NAME, 1, 35)
OBJECT_NAME,
2 SUBSTR(OBJECT_TYPE, 1, 20) OBJECT_TYPE
3 FROM DBA_OBJECTS
4 WHERE STATUS = 'INVALID';
no rows selected
SQL> SELECT SUBSTR(COMP_ID, 1, 20) COMP_ID,
2 SUBSTR(COMP_NAME, 1, 40) COMP_NAME,
3 STATUS
4 FROM DBA_REGISTRY;
COMP_ID
COMP_NAME
STATUS
CATALOG
Oracle Database Catalog Views
VALID
CATPROC
Oracle Database Packages and Types
VALID
SQL> SELECT O.NAME FROM OBJ$ O, REGISTRY$ R
2 WHERE O.STATUS > 1 AND
3 (O.CTIME BETWEEN R.DATE_LOADING AND R.DATE_LOADED OR
4 O.MTIME BETWEEN R.DATE_LOADING AND R.DATE_LOADED OR
5 O.STIME BETWEEN R.DATE_LOADING AND R.DATE_LOADED);
no rows selected
According to note 838725 I executed the following script:
SQL> begin DBMS_STATS.GATHER_DICTIONARY_STATS(
2 ESTIMATE_PERCENT => NULL,
3 METHOD_OPT => 'FOR ALL COLUMNS SIZE AUTO',
4 GRANULARITY => 'ALL',
5 CASCADE => TRUE,
6 OPTIONS => 'GATHER',
7 NO_INVALIDATE => FALSE);
8 end;
9 /
begin DBMS_STATS.GATHER_DICTIONARY_STATS(
ERROR at line 1:
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14611
ORA-06512: at "SYS.DBMS_STATS", line 14957
ORA-06512: at "SYS.DBMS_STATS", line 17261
ORA-06512: at "SYS.DBMS_STATS", line 17303
ORA-06512: at line 1
And, if I run the command from the same note
volta:oracmd 53% brconnect -u / -c -f stats -t oradict_stats
BR0801I BRCONNECT 7.00 (43)
BR0805I Start of BRCONNECT processing: ceblmvwb.sta 2009-09-12 18.08.17
BR0484I BRCONNECT log file: /oracle/CMD/sapcheck/ceblmvwb.sta
BR0280I BRCONNECT time stamp: 2009-09-12 18.08.18
BR0807I Name of database instance: CMD
BR0808I BRCONNECT action ID: ceblmvwb
BR0809I BRCONNECT function ID: sta
BR0810I BRCONNECT function: stats
BR0812I Database objects for processing: ORADICT_STATS
BR1314I Oracle dictionary statistics will be collected with default
options
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRCONNECT time stamp: 2009-09-12 18.08.18
BR1311I Starting collection of Oracle dictionary statistics...
BR0285I This function can take several seconds/minutes - be patient...
BR0280I BRCONNECT time stamp: 2009-09-12 18.08.28
BR0301E SQL error -20003 at location stats_oradict_collect-4, SQL
statement:
'BEGIN DBMS_STATS.GATHER_DICTIONARY_STATS (ESTIMATE_PERCENT => NULL,
METHOD_OPT => 'FOR ALL COLUMNS SIZE AUTO', GRANULARITY => 'ALL',
CASCADE => TRUE, OPTIONS => 'GATHER', NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14611
ORA-06512: at "SYS.DBMS_STATS", line 14957
ORA-06512: at "SYS.DBMS_STATS", line 17261
ORA-06512: at "SYS.DBMS_STATS", line 17303
ORA-06512: at line 1
BR1313E Collection of Oracle dictionary statistics failed
BR0806I End of BRCONNECT processing: ceblmvwb.sta 2009-09-12 18.08.28
BR0280I BRCONNECT time stamp: 2009-09-12 18.08.28
BR0804I BRCONNECT terminated with errors
I couldn´t run the statistics from my system.
Hernando

Error 20003 and 4823

Hi , I m new to LabVIEW and stuck up in a problem,
I'm taking input from 2 sources, First is the sound port and the other signal generator in Labview, and have to process it further
The problem is that when i generate the signal in Labview for some time and switch it over to sound port then the Errors comes 4823 buffer overflow and error 20003 "no of samples should be greater than 0"
The VI is attached below,
regards,
Attachments:
ERROR MIC AND SIG.vi ‏50 KB

Hi Shrekt,
The error you get is quite normal.
You should make a connection between the input and output of the refnum wire in the False case.
The error is created since the Input Sound Clear function has no valid refnum.
Enclosed you will find the error message and the corrected VI.
Best regards,
Peter S
Attachments:
error.PNG ‏8 KB
ERROR MIC AND SIG (edit).vi ‏51 KB

Error -20003 at OAT Resample.vi

I have been in contact with NI support regarding this error. The following is our discussion:
2. In Transient
playback.vi,
which plays our data on the front panel, I get Error -20003 occured at
OAT Resample.vi
It says samples must be greater than zero.
Sounds like you are sending an empty waveform to the OAT Resample vi. To
debug this, put a probe on the waveform that is going into the OAT Resample
vi and make sure that you are always sending in data and no empty waveforms.
It could be that this is only happening on a certain channel, so
make sure to check each.
I can't run the VI long enough to probe the channel. It
gives me an error immediately, so I think the problem is at the
beginning of the file. If I ignore the error and continue, I can probe
it and get data for every channel.
Attachments:
Transient Playback edit.vi ‏613 KB

Hi dmertz -
Please refrain from
creating multiple posts/threads about the same issue. It's easier for
forum users and NI employees to help you if you keep all the
information in one place.
Duplicate post here
Since you seem to have consolidated the question on that post I will respond there.
Regards,
Sandra T.
Applications Engineer | National Instruments

Constrained Nonliner Curve Fit Error -20003 help

Hello.
I use Constrained Nonliner Curve Fit.vi to fit a customed function, just in the following picture 1. The initial paraments are exactly right, but it always stopped by a error -20003,it says "The number of samples must be >0",just as the picture 2.
What should I do to correct it? Thanks!
Attachments:
1.png ‏32 KB
2.png ‏9 KB

Can you attach your code and some sample data? How big is the [X] array? The [a] array?
Does it work if you remove the partial derivatives calculation? (LabVIEW will automatically substitute numerical derivatives).
(The way you index into [a] seems incredibly convoluted. Couldn't you simply reshape into four columns and autoindex on a FOR loop?)
LabVIEW Champion . Do more with less code and in less time .

DB13 CheckDb and Update Stats Error

Hi,
I am getting below error in CheckDb and Update stats:
Update Stats:
BR0301E SQL error -20003 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPCRM"', TABNAME => '"WSSOAPPROP_DARK"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14537
ORA-06512: at "SYS.DBMS_STATS", line 14558
ORA-06512: at line 1
Check Db :
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 STATEMENT FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: ceeuoqja.chk 2010-12-17 06.30.46
BR0280I BRCONNECT time stamp: 2010-12-17 06.30.46
BR0804I BRCONNECT terminated with errors
Above both errors are of different System and both system are just get ready after System Copy of PRD Server.
Please suggest possible route cause of this error.
Shivam

for update stats issue check Note 1417124 - Error ORA-20001 in statistics class CL_SDB_ORA_UPDATE_STATS
for DB check error go through note 400241
Please search before you post your thread on SDN

Update Database Statistics during System Export

hi All,
I am getting following error on step (Update Database Statistics ) during system export.
WARNING 2011-06-17 15:13:35
Execution of the command "E:\usr\sap\PRD\SYS\exe\uc\NTAMD64\
brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s
P10 -f allsel,collect,method,precision,space,keep -p 4"
finished with return code 5.
Output: BR0801I BRCONNECT 7.00 (31)BR0805I Start of BRCONNECT processing:
cegczbfe.sta 2011-06-17 15.12.02BR0484I BRCONNECT log file:
G:\oracle\PRD\sapcheck\cegczbfe.sta
ERROR 2011-06-17 15:13:35
CJS-30023 Process call 'E:\usr\sap\PRD\SYS\exe\uc\NTAMD64\
brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10
-f allsel,collect,method,precision,space,keep -p 4'
exits with error code 5. For details see log file(s) brconnect.log.
there is small part of brconnect.log is:
BR0204I Percentage done: 27.88%, estimated end time: 15:16
BR0001I **************____________________________________
BR0280I BRCONNECT thread 2: time stamp: 2011-06-17 15.13.31
BR0301E SQL error -20003 in thread 2 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCL_STAT"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14830
ORA-06512: at "SYS.DBMS_STATS", line 14851
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCL_STAT
BR0280I BRCONNECT thread 2: time stamp: 2011-06-17 15.13.31
BR0301E SQL error -20003 in thread 2 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCL_STATT"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14830
ORA-06512: at "SYS.DBMS_STATS", line 14851
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCL_STATT
BR0280I BRCONNECT thread 2: time stamp: 2011-06-17 15.13.31
BR0301E SQL error -20003 in thread 2 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCMVWOBJ"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14830
ORA-06512: at "SYS.DBMS_STATS", line 14851
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCMVWOBJ
BR0280I BRCONNECT thread 2: time stamp: 2011-06-17 15.13.31
BR0301E SQL error -20003 in thread 2 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCMVWOBPR"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14830
BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPSR3"', TABNAME => '"/BEV3/CHCTLVAR"', ESTIMATE_PERCENT => NULL, METHOD_OPT => 'FOR ALL COLUMNS SIZE 1', DEGREE => NULL, CASCADE => TRUE, NO_INVALIDATE => FALSE); END;'
ORA-20003: Specified bug number (5099019) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 14830
ORA-06512: at "SYS.DBMS_STATS", line 14851
ORA-06512: at line 1
ORA-06512: at line 1
BR0886E Checking/collecting statistics failed for table SAPSR3./BEV3/CHCTMSTFUB
BR0280I BRCONNECT thread 2: time stamp: 2011-06-17 15.13.34
BR0844E 100 errors occurred in thread 2 - terminating processing of the thread...
BR0280I BRCONNECT time stamp: 2011-06-17 15.13.34
BR0848I Thread 2 finished with return code -1
BR0280I BRCONNECT time stamp: 2011-06-17 15.13.34
BR0879I Statistics checked for 0 tables
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 639/0 tables/indexes
BR0889I Structure validated for 0/749/0 tables/indexes/clusters
BR1308E Collection of statistics failed for 68292/0 tables/indexes
BR0806I End of BRCONNECT processing: cegczbfe.sta 2011-06-17 15.13.34
BR0280I BRCONNECT time stamp: 2011-06-17 15.13.35
BR0804I BRCONNECT terminated with errors
how can I resolve this issue?
Regards,
majamil

hi SM,
I have applied these patches with Opatch which successfully applied.
is it ok or i had to use the MOpatch for these?
one more thing for your information , when i execute Delete Harmful Statistics under Database Statistics in brtools then i got following
BR0280I BRCONNECT time stamp: 2011-06-30 08.10.53
BR0818I Number of tables found in DBSTATC for owner SAPSR3: 390
BR0280I BRCONNECT time stamp: 2011-06-30 08.10.53
BR0807I Name of database instance: PRD
BR0808I BRCONNECT action ID: cegfjniv
BR0809I BRCONNECT function ID: dst
BR0810I BRCONNECT function: stats
BR0812I Database objects for processing: HARMFUL
BR0852I Number of tables to delete statistics: 0
BR0856I Number of indexes to delete statistics: 0
BR0863W No tables/indexes found to update/delete statistics or validate structur
e
BR0806I End of BRCONNECT processing: cegfjniv.dst 2011-06-30 08.10.53
BR0280I BRCONNECT time stamp: 2011-06-30 08.10.53
BR0803I BRCONNECT completed successfully with warnings
BR0292I Execution of BRCONNECT finished with return code 1
BR0668I Warnings or errors occurred - you can continue to ignore them or go back
to repeat the last action
BR0280I BRTOOLS time stamp: 2011-06-30 08.10.53
BR0670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to abort:
c
why i am getting this return code 1?
Regards,
Edited by: majamil on Jun 30, 2011 8:20 AM

Envelope Detection - Band specification question

Hello,
I'm using the Envelope Detection vi from the Sound and Vibration Meas Suite but I'm having trouble determining values for the Band Specification.
I understand that one value is the center freq and the other specifies the span on either side of this center freq.
The waveform I'm feeding to this function has a resolution of 5000 S/s so I assumed my span can't exceed the max frequency content of my waveform.
If I enter a center freq of greater than 2500Hz I get an error stating that the value is invalid. This makes sense.
However, with a center freq of 2500Hz my span can only be as high as 1250Hz. If I enter 1251Hz or higher I get the following error:
Error -20003 occurred at SoundVib_Resampling.lvlibAT Single Stage Decimation with IC.vi in
SoundVib_Resampling.lvliba_Decimation with CIC and Compensation Filter.vi:13 in
SoundVib_FaultAnalysis.lvliba_Shift and Low Pass Filter (1 Channel).vi:3 in
SoundVib_FaultAnalysis.lvlibAT Envelope Detection (Waveform Output, 1 Channel).vi:1 in
VibrationAnalysis_2.vi
Possible reason(s):
Analysis: The number of samples must be > 0.
Can someone explain to me what these band specification values are for and what their limits are?
Thank you.

You are aware, that the nyquist theorem states that the highest bandwidth you can measure is 1/2 of the sampling frequency? So the 2.5 kHz limit has nothing to do with the span. And also a span of 1.25 kHz (assuming it is in both directions) is the 2.5 kHz limit.
But I never worked much in this domain, so I'm of no further help.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

General LS Linear Fit - Number of Equations

Hi Folks,
I'm using the "General LS Liner Fit" VI to interpolate Measurement Data depending on 2 Variables. To do this i would like to use an poly-equation of the form:
z = A + Bx + Cy + Dxy + Exyy ... Kxxxyyy ... etc.
This sems to work fine, but im not able to generate more than ~ 100 Parameters. If i try to do so the VI doesen't give me any results.
I have ~ 2000 Data Points so i create a H-matrix of 2000 x 100 Values as Input for the VI. Can this be too much? For an Matrix of 2000 x 81 Values the System still works an takes ~2 Seconds to evaluate a result.
If anyone knows this problem, knows a better solution or can tell me what im doing wrong please help me.
Greetings
Hans

What I am seeing is that all of the algorithms (SVD, Givens, Givens2, etc.) work up to 90 coefficients (although SVD sometimes reports error -20003 in my application), but fail starting at 91 coefficients. I need something more like 600+ coefficients.
Has anyone run across an alternative LS Fit VI? I found a customer-sumitted alternative called "General_LS_Linear_Fit+.vi", but it still uses the same NI DLL function.
I wouldn't mind writing one myself if someone could point me to a write-up of any of the algorithms.
Thanks,
Travis

Fourier Transform of an Exponential Function

ok. this is something which i had tried earlier. I'm supposed to do a fourier transform of this signal.... exp(-alpha*t) where alpha is greater or less than 0.. the upper limit is inf and lower limit is 0. the waveform i got is a straight line, and there's this error -20003 i.e number of samples > 0.
I thought I had already defined the number of samples? Is that anything which I had missed out? Please see attached.
Attachments:
FT for real decaying exponential (eg 3-24) test v02.vi ‏25 KB

I cannot find your function exp(-alpha*t) anywhere in your VI. -- Where should I define this?
On the block diagram!
Where do you enter alpha? -- As above.
Maybe you want to add another control to the front panel.
Quote: "... where alpha is greater or less than 0...". Is that the same as "where alpha is not equal 0"? - Nope. Sorry poor definition there. The equation applies only when alpha is Smaller or equals to 0
Are you sure? So why would the function have negative alpha in the formula? A more reasonable assumption would be that alpha is positive and thus "-alpha" negative.
I assume that "t" is probably related to the array index. However, you are taking the plain exponential of each array value instead. Why? To reflect the original waveform into the waveform chart.
You talk about an exponential function, but you actually generate a sine function, which is not even mentioned in the problem description. Could it be you want a sine function with an exponentially decaying amplitude?
Why do you integrate? As the question goes, I need to find a decaying exponential over time. That's why I integrate the function.
Integrating a function does not generate a decaying exponential. Makes no sense!
What is the purpose if the derivative without signal input? Don't get your question
In the lower right of your diagram you have a second graph terminal connected to the output f the derivative function. There is no input wired to that function.
Why don't you put indicators on the error outputs? Alright, will do that.
What's up with the blue diagram constants. Make them orange to avoid coercions. - May I know how I can do this?
Easiest would be to just delete the constant, then right-click in the desired function input and select "create constant". Now you have the correct representation, guaranteed.
If you later want to change it, right-click the diagram constant and change the representation.
LabVIEW Champion . Do more with less code and in less time .

Error ORA-20003: Cannot read file/... in Cash Management?

Dear All.
I am having this Error in the Cash Management Module on the bank statement load process
Error ORA-20003: Cannot read file /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
How do I resolve this error.
Thank you.

Hi Lucy,
The error is probably due to one of the reasons:
1. There is no file in the location: /software/d01/oracle/interface/finance/inbound/email.9Nemail.13111507.3445704.cnv.
2. No permission on the file respective file.
Please get the assistance from the DBA to check on this.
Thanks &
Best Regards,

There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)

Hi there,
When I'm trying to manage spaces in SAP Business Objects Explorer 4.1 SP04, I'm getting the following error:
Failed to retrieve the data source list.
There was an error while retrieving the universes from the CMS (Central Management Server). (PS 20003)
For input string: "false"
I've already restart Explorer servers (Explorer Exploration Server, Explorer Indexing Server, Explorer Master Server and Explorer Search Server) and rebooted the server where Explorer is installed.
Nothing seems to fix this error message. I'm not able to create new spaces because I cant access the sources:
I'd appreciate some help !
Thanks in advance

HI Pavan,
Admin is on the Administrators Group, which as Full Control on the Explorer Application
I think this worked on the day the Explorer was installed (past week).
Since them never worked.

CJS-20003 Error Message when installing anything on the portal

Hi there,
whenever I try to install anything on my EP6SP8, I get this nasty error message.
CJS-20003 While adding instance G00: An instance already exists with that number and a different name or SID: PEP/DVEBMGS00.
So far I tried to install EP6SP9, EP6SP11, JAVA WAS SP 11, I uninstalled TREX and tried to install TREX 6.1 again --> always comes this error.
What is wrong here?
Your help is really appreciated and will surely be rewarded (at least with points).
Greetings from Switzerland,
Ingolf Dresp

Small steps first...
The installer you use MUST come with the media you wish to install. With patches you get a sapinst along with the patch (for Web AS, EP, and TREX certainly). FOr instance with Web AS you get 4 sar files - these combine to form the whole patch kit. You cannot just take one part of the kit and use it with an existing sapinst you already have on your system.
If you are using install media and choose "Default" for your settings you likely get this as Default settings are usefull only for the first install, after that you need to use the gui to pick your system numbers so you do not have conflicts.
Nick

RMAN-20003 error

Hi,
I am trying to do some backup recovery testing on a database that I have not touched in a very long time. This is an 8i database on a unix system. When I try to do a backup, I receive the message: RMAN-20003 target database incarnation not found in recovery catalog.
All the information I can find on this error indicates that I must issue a reset database in RMAN after issuing an open resetlogs for the target database. But my target database was not openned with an open resetlogs, it is openned with a normal open. If I try to open with the resetlogs it gives me an error indicating that I can only open with resetlogs after an incomplete recovery. So how do I correct this error? If I issue the RMAN reset database command, I get RMAN-20009: database incarnation already registered. So on one hand it's telling me that it can't find the incarnation in the recovery catalog, on the other hand it's telling me that the incarnation is already in the recovery catalog. What's up with that?
Carl

I solved this problem by reseting the incarnation to a previous version. Then I reset the incarnation back to the original version. After that, I was able to run a backup without any problems. Weird!

Owb 10g R1: errors RPE-01003 and ORA-20003

We are calling our mapping within an Oracle 9.2 function. Every step of the mapping executes without errors. But after executing the last step (sending an e-mail) following errors are occcuring:
ORA-20003: The object is not in a valid state for the requested operation ORA-06512: at "OWB_RUN.WB_RTI_EXCEPTIONS", line 94 ORA-06512: at "OWB_RUN.WB_RTI_SERVICE_EXECUTION", line 195 ORA-06512: at "OWB_RUN.WB_RT_SERVICE_CONTROL", line 167 ORA-06512: at line 1
But all the DB-Objects are valid ! What's the matter. Can anybody help us ?

Rotimi,
This message indicates that the object you try to execute is invalid with compilation errors. In the database you would see that the object has errors because for example: referencing tables cannot be found (because they had not been deployed or you do not have privileges to them), statements are invalid (e.g. in expressions), etc. If you try to execute a mapping that is invalid you will get these errors. Needless to say, you have to fix the fact that the mapping is invalid before you can execute it.
Thanks,
Mark.

Error 20003 LV 7.1

Similar Messages

Maybe you are looking for