Error 40505 and the select is correct
Hi guys!
I am experiencing the following problem:
I'm trying to populate a block using a view, the view name is ADMIN_V_DOC,
then i do an execute query and the error is 40505, but i get the :SYSTEM.LAST_QUERY and the select works in the toad...
may someone help me?
thx in advance!!!
How about putting the contents of system.last_query on here : there must be something wrong somewhere.
With the shift-F1 problem : I've had that in the past but at the momwent us a different key mapping so it works. You could always swap the key mapping over (the files are in forms home and called something like frmusw.res)
Similar Messages
-
Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."
Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.
-
Error message at the selection screen while processing screen logic
Hi All,
I need to show error message at the selection screen.
I am calling the screen inside the START-OF-SELECTION, and processing the calculation and putting the data into i_final internal table. If internal table I_FINAL is empty I have to show error message saying ' DATA is empty' , this error message should be shown at the SELECTION SCREEN (Report input screen 1000) and provide the user to enter the input values once again.
But whenever I am populating error message, I am getting a pop up to chose exit, and process is terminating.
Since I am in the middle of the screen processing whenever I am giving a error message.
Please let me know how can I populate error message without terminating the process while I was in the middle of the screen processing logic.
Regards,
Maheshhi
If u are trying to validate a field use
AT SELECTION_SCREEN ON <field>
if want to validate a block
AT SELECTION SCREEN ON <block>
If Universal Validation
AT SELECTION SCREEN
and display a 'E' Message inside the block.
You can Enter Correct Value and start processing Forward.
hope this will help.
Regards
Sumit Agarwal -
Error when Generating the Selection Screen?
Hi Guys,
When i am executing the program with this code .I am getting this type of Error
" Source code ZUSFICOR00013_MM_ACNT_COSTING Line 0
Error when generating the selection screen "1000" of report
I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.Hi Seshu,
While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi. -
Hey I am kind of new to this forum situation, but I keep trying to install software updates on my macbook for the last two weeks and the aforementioned error (None of the selected updates could be installed. An unexpected error occurred.) keeps resulting. I would download them straight from online, but I don't know which ones to download. What should I do?
Bring up Software Update, and when it says it has updated software to download, click the button on the left bottom of the window, might say something like show details. That will open the box to show you exactly what would download. You can then visit the Apple download site at http://support.apple.com/downloads/
-
'Error when generating the selection screen "0500"
Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
SachinHi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini -
Error when generating the selection screen '0005'of report 'XYZ'
Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
SaurabhIf you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob -
My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes -
i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!
Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H. -
One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
Hi,
I have a new laptop and I am trying to download CS3. The site on adobe gives an error message and the one I tried from this forum downloaded CS3 extended, so my serial number does not work. Does anyone have any suggestions. Regards VickiThe trial is always extended. The serial number you enter determines whether it runs as standard or extended.
I'm getting through fine with that link, so it must be a browser issue or some such thing. Try another browser. -
I have been trying to reinstall iTunes but I have been getting error messages. One says I need a fileMSVCR80.dll, one says error 7 and the last one says windows error126.
This problem started yesterday when I tried to download the newest iTune update.
The error message suggested trying the download again and i have tried over ten times and i get the same messages and error numbers.iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I have Windows XP on my dell desktop- I have uninstalled Itunes and reinstalled Itunes 10.2.5 - when the install finished i got the error 7 windows error 126 and the itunes won't open
I have uninstalled Itunes and reinstalled Itunes 10.2.5
Doublechecking. Did you just uninstall iTunes, and not the related software and components?
The 7 can be caused by damage to one of the other software components associated with iTunes (most commonly Apple Application Support). If that's what is afoot, a complete uninstall/reinstall may be of some assistance:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?
Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
I want the bookmarks and as much of the stuff on my laptop to also be on my netbook. User 1 is the original user account of the laptop. I created another account since other user didn't want my bookmarks, etc, Both users are administrators. So I want
-
My macbook pro no longer connects automatically to my wi-fi network
Does anyone know why or how to fix the fact that my macbook pro no longer automatically connects to my wi-fi network?
-
Lion Mail will not open, and won't update the database. Help??
When I try to open mail, for the first time says it needs to update my database, It seems to start then crashes. Is there a fix?
-
HT2508 Playing movies on home theater system via mac
I have a 2007 mac book. managed to connect the video to tv via the home theater but still stuck on sound. tried using the optical audio cable using the 3.5mm jack adapter but still nothing.
-
I just noticed this while browsing To receive your OS X Mountain Lion upgrade, you must complete the order form and provide an electronic copy of a dated, itemized sales receipt indicating the marketing part number(s) of the qualifying product(s) pur