Error 6 even after installing the software from Knowledge Base

I am sure this has been on here before but I cannot find it.
I am building a wedding video, one main menu, two sub menus with 7 chapters each.
Check project reveals all set to go.
tried to use the software recommended in the knowledge base but my system already has the latest version installed.
SItuation-
Burning Mpeg 2 BluRay Max quality
All assets include two timelines (Trancscoded at Max quality), 3 menus, one sound track for menu.
Using Dell 690 Workstation
Duel Xeon Quadcore 5455's
Loaded 16 gigs of Ram but using three since XP32 SP3
Sony Blu-ray burner (other burner disabled)
7TB's of Hard drive attached to system. 5 on board Drives and 4TB through Esata. System drive 10000RPM WD Rap.
have Avid Media composer on this System too (If those drivers could be of issue and Sonic Scenarist (This project does not need that power)).
Also Several conversion apps Sorrenson, TMPGEnc, Procoder, AVS Video converter. (Driver issues interfering?).
Never produced a wedding video as my line is Football but did a 5 camera HD shoot (also shot some Super 8 footage upconverted to HD) for nephew as a wedding present. Sending him a Blu-
Ray Samsung player with the video this week if I can get it on the Disc.
Could start over with Sonic DVDit HD or Scenarist but spent last night building this encore job.
ERROR 6 I could use a little help on this one please.

Thank you.
I actually spoke to an employee at Park Av (Adobe headquarters) in San Jose this morning through a friend in the industry who added her on (There is someone there all the time he said).
The simple fix according to her is just the cause that was in your link, it comes from transferring assets in and out. I had done that and the replacement cued up the error 6. There are other error 6's generated but that was the first question she asked.
Anyway I really appreciate the response.
Actually writing the disc now with just a few gigs to go on the Test Copy.

Similar Messages

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic

I can't install the software from the original DVD

Welcome..
I have purchased software:
ADOBE INDESIGN CS 4 ME
but I can't install the software from the original DVD after I change the hard disk and the operation system of my computer..
after I click "Install" the installation stop directly!!
I need to download "ADOBE INDESIGN CS 4 ME - Arabic language support" for windows 7..
thank you,,
Best Regards,,

Welcome..
This is the answer from http://www.winsoft-intl.com:
"Dear Majed,
We would like to thank you for your email and we are sorry for the problem you
face.
Since Mid-October 2012 WinSoft are not able to support Adobe Product, You
should contact Adobe support
Best regards,
Winsoft Support Team."
And this is another answer from http://www.winsoft-intl.com:
"Dear Majed,
thank you for contacting us.
Please note that since 2012 we are not Adobe reseller anymore and do not provide Support for Adobe products.
Please contact Adobe directly or any authorized reseller in your area.
Sorry for not being able to help you further.
Kindest regards,"
and Before that Adobe support service told me they can't give me links to download!! (or they do not have links to download!!)
I can't believe all this happening with Adobe Toward one of its clients....!!

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

HT5037 Iphoto Still wont open even after installed the prepare file

Still wont open even after installed the prepare file. I haven't felt this frostation since window 5

Go to Applications /Utilities. Find the upgrader app there. Double click on it to run it.
I haven't felt this frostation since window 5
Sorry, no idea what this means.

The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

HT3702 My apple id unable to update and install the software from my iphone

My apple id unable to update and install the software from my iphone.I had checked the purchased history and found that my last payment had failed.I went to the bank to check my debit card status.But unable to found any problem from the bank.Had confirmed that my debit card have sufficient money to deduct.Pls help me as soon as possible ...
Thanks,
Jay Tan

When you select update, verify that it is showing your correct Apple ID, perhaps you have an app that was downloaded with a different ID, all apps are always associated with the ID that first downloaded them.

My new imac won't operate youtube even after installing the latest flash

my new imac won't operate youtube even after installing the latest flash

Problem solved!
I had downloaded and then installed Flash, and restarted.
The problem? I was expecting Youtube to work as on my old PC, where you get a little pop-up menu at the bottom of the TV screen to play. pause etc. That won't happen on a Mac until you click on the oblong that says Flash in the middle - I didn't know that!
Hooray!

Boot camp error: Can't install the software because it is not currently available from the Software Update server.

hi there i was trying to install windows via bootcamp and when i was trying to download the support software i had an error of "Can't install the software because it is not currently available from the Software Update server." i am using a 15" 2009 macbook pro and the bootcamp version is 5.1.0 (473). can anyone help? thanks in advanced

Instead of downloading the Windows support software from Boot Camp Assistant, download it from the Apple website. Mid 2009 and older MacBooks Pro only support this Windows support software version > http://support.apple.com/kb/DL1630 This version allows you to install a 32-bit or 64-bit Windows 7 version.
Follow Apple's steps to install Windows on your computer > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Cm.jar is working even after deleting the jar from Server

Hi,
To update the environment with the new changes we had manually copied the cm.jar into the respective folders but due to some class errors Deployment was not successful,So as a matter of trial we had deleted cm.jar from the respective folders and then we had ran the initialsetup,
Strange thing what we have observed is that all the custom logic which was initially deployed through cm.jar was still exisiting in the applicationserver and are getting executed smoothly
This is the process what we have followed
Method 1:
1)     Stop server
2)
Copy cm.jar to SPLBASE/etc/conf/root/WEB-INF/lib
Copy cm.jar to SPLBASE/etc/conf/XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
3)     Run InitialSetup
4)     Start Server
Method 2:
1)     Stop server
2)     Set Exploded directories to true
3)     Initial Setup
4)
Copy cm.jar to SPLBASE/splapp/applications/root/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/applications /XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
5)     Run InitialSetup
6)     Start Server
Method 3:
1)     Cm packaging.
Even after removing cm.jar from all places manually my custom code which I deployed initially is working. I could run custom batch and custom algorithm. Very Strange. I am not sure what I missed or where application is referring to.
We want the old code to be removed permanently from server?Can you anyone help?
Thanks
shiva

Hi Mr Shankar,
Even if you have deleted the cm.jar file from respective location.It do exist in splapp.war file.If you will extract that file you will find the cm.jar file in /splapp/web-inf/lib/cm.jar location.So whenever you will run the initialsetup it will restore the cm.jar.This thing is happening in your case also.So delete the file from splapp.war and rebuild the war.This will solve your issue.
Hope it will work for you.
Regards
sunil sahu

I coud'nt install the software from cd for printer

i want to use the printer , first i need to install the software for printer in mac but i couldn't

If you are running 10.9 Mavericks or later, I believe it will try to find the Driver by itself.
If you are running 10.6.8, then it will not.
Try it, it will not break anything.
If it does not work, post your exact model Printer and version of Mac OS X, and Readers will be happy to try to find that Driver for you and post a link.

Update showing up in "Compliance 5 - Specific Computer" Report even after removing the update from the Software Update before creating Group and Package

So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
Thanks

But, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com

Office Pro 8000: Can't Print/Out of Ink Error even after installing new cartridge.

When I tried to use my printer a few days ago, I received a "Can't Print: Out of Ink" error message concerning the magenta cartridge. I had used the printer a few days before that, and had not received a low ink warning. It seemed suspicious to me that I would have received an empty cartridge error message without first receiving a low cartridge warning. The yellow and cyan cartridges read 70% full - all 3 were original cartridges.
I purchased a new 940XL magenta cartridge and installed it per instructions. Now I am getting a message that the new 940XL cartridge is empty. I can shake the old 940 cartridge and hear liquid inside. Obviously, the new cartridge is also full. I've tried cycling power, reinstalling the software, etc, with no change in status. If I swap back and forth between the old 940 and new 940XL cartridge, they are properly identified by type on my screen as the 940 or 940XL. Due to the way the problem has presented itself, I don't believe it is a cartridge issue.
Of course, problem first arouse on May 8th, and my warrantee expired April 26th. Any suggestions?
This question was solved.
View Solution.

I've solved my own problem, which was clearly a factory assembly defect. I looked inside my printer with a flashlight in the area where the ink cartridges are installed, and found magenta ink sprayed inside the printer. I disassembled the printer, and found that the magenta line had been damaged during assembly. There are four ink tubes which exit from behind the ink cartridges, then make a U turn back toward the front of the printer. Just after the U turn, they make another bend up-wards. It is at this point that I found the damaged magenta line, directly above a screw on the right-hand side of the ink cartridge housing. The lines are in a very narrow passage, and are held in place by several keepers molded out of plastic. It appears that the lines were put in place in the keepers, then the screw inserted from above. As I said, it is a very tight passage, and it would be very easy to damage the ink line at that point if the lines weren't carefully held back to insert the screw during assembly.
To solve the problem, I removed approximately 1/4 inch of damaged magenta ink line. I carefully cut the line with a sharp razor, to prevent collapsing the line or causing burrs to the tubing. I then placed about 3/4" of self-sealing heat shrink tubing over one end of the ink line. Next I spliced the line with a small piece of stiff plastic tubing from the handle of a cotton swab, which was a perfect, snug fit over the ink line. Being careful not to collapse the ink tube or cause further damage, I gently twisted the ink line back and forth until the ends were butted up inside the cotton swab splice. I then positioned the heat-shrink tubing over the splice, and shrunk it with a hair dryer. The heat-shrink tubing I used has hot-melt glue applied to the inside, which further aided in making a leak-proof splice. Again, there is not a lot of room, so the splice had to be kept small.
I reassembled the printer, reinstalled the ink cartridges, and powered up the printer. After the normal, long start-up delay, I printed several full-color test sheets, and all was fine. The magenta cartridge that I had installed previously now shows that it is full, and the remaining cartridges also read the levels that they had prior to disassembly.

Flash plugin will not install even after installing the latest version Flash

When I go to a site that contains Flash content, it says "A plugin is needed to display this content" and there is a link to install the plugin. Additionally, there is a message at the top of the page that says "Additional plugins are required to display all the media on this page" with an option to "Install Missing Plugins." I click the link to install the missing plugin, and a dialog box pops up that says "The following plugins are available:" and lists "Adobe Flash Player 11.0.1.152" with a check box next to it. The box is checked, and I click "Next" to install. It goes through the motions, and then tells me that "No plugins were installed." There is a link to manually install the plugin, which takes me to Adobe's Flash download page. I unchecked the box to pair McAfee Security with the download, and downloaded the latest version of Flash (to be honest, I've actually downloaded this exact same version about 10 times today). The dialog box pops up, I save the file, and once it has downloaded, I open the containing folder (my downloads folder). I then close all programs (including Firefox) except for the Windows Explorer folder that I'm going to run the installer from. I double-click on the Flash installer to run the installation. The installation process completes, the installer tells me that the download is successful, and my browser opens back up with an "Installation Successful" message from the Adobe website. Yay! My installation is successful... Orrrrrr not. Navigating back to the page with the Flash media - still have a message saying I need the plugin. Attempt to download plugin again...no dice.
THEN, I go to "Manage my add-ons" thinking maybe I need to enable the plugin. There is no Flash (or Shockwave) plugin listed on any of the menus - it's like it doesn't exist.
I downloaded the latest version of Java because I read somewhere that Flash requires Java to work; I installed the "Add-On Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, as best I can tell.
I also went to Adobe's page where you can see what version of Flash you're running (http://www.adobe.com/software/flash/about/) and it doesn't even show that I have Flash installed. In Internet Explorer, it does show that I have Flash installed, but it's the previous version (but that is likely due to the fact that I downloaded Flash from Mozilla, not IE, and they use different modes in each browser - so an update that you download from one browser does not necessarily apply to the other browser).
So in summary: I do not know what on earth is wrong here, but I am about as frustrated as I have ever been in my life. I don't know why the Adobe Flash installation is saying it is successful (is it lying to me??), but there is no plugin showing up in my Manage Add-Ons menu, and I have googled every possible combination of the content in this post and have not found a solution that works yet.

NOTE: Just discovered that Adobe is making a bigger mess than any previously.
They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
*32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
*64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

Error 6 even after installing the software from Knowledge Base

Similar Messages

Maybe you are looking for