Error Account user="demonw7\SAPServiceP71" does not exist. PI 7.1 EHP1

Hi,
I had error message during installation of PI 7.1 EHP 1, The error is
RACE      2009-08-25 16:29:11.656 [synxcuser.cpp:2121]
           CSyUserImpl::isExistingOnOS() lib=syslib module=syslib
existence check for user demonw7\SAPServiceP71 returned false.
INFO[E]    2009-08-25 16:29:11.656 [synxcuser.cpp:147]
           CSyUserImpl::CSyUserImpl(const CUserData&, bool)
           lib=syslib module=syslib
FSL-01027  Account user="demonw7\SAPServiceP71" does not exist.
TRACE      2009-08-25 16:29:11.671 [synxcuser.cpp:302]
           CSyUserImpl::CSyUserImpl(const CUserData&, bool)
           lib=syslib module=syslib
Exception thrown near line 149 in file synxcuser.cpp
Stack trace:
iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript()
d:\depot\bas\710_rel\bc_710-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall()
iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall()
synxcaccmg.cpp: 114: bool CSyAccountMgtImpl::isExisting(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
synxcaccmg.cpp: 88: PSyAccount CSyAccountMgtImpl::getAccount(ISyAccountMgt::eAccountType accountType, iastring sNameOrSID)
synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false)
syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="demonw7\SAPServiceP71", sid="", create=false, ISyProgressObserver* )
synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
Please Advise ? do i need to create the user manually ?
Best Regards
Fernand Lesmana

Hi Juan,
I have checked and re-tried to install from beginning but now got another problem :
ERROR      2009-08-26 10:21:10.437 [sixxcstepexecute.cpp:984]
FCO-00011  The step doConfiguration with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|1|0|NW_MSS_DB|ind|ind|ind|ind|3|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0|doConfiguration was executed with status ERROR .
TRACE      2009-08-26 10:21:10.468
Instantiating new NWUsageTypeBasic
Please advise
Best Regards
Edited by: Fernand Lesmana on Aug 26, 2009 4:59 AM

Similar Messages

  • Error: MDL1819: User Name OWB_OWNER does not exist in repository.

    Hi All,
    While doing OWB metadata export I got the following error.
    Error: MDL1819: User Name < BCP_OWB_OWNER> does not exist in repository.
    Actually daily I will take back up for metadata in OWB_OWNER project.
    But last 3 days onwards I am getting this error.
    Plese help me?
    I have nearly 50 mapping in this repository.
    Thanks in Advance.

    Hi!
    I know I'm late with this post, but I'll post it anyway for future reference!
    I encountered the same problem and found out that I had a trailing space in my login name, so check for any traling spaces at login to OWB-designer!
    (From the error message pasted in your question it seems you have a space in the beginning)
    That solved the problem for me.
    BR Par

  • User or group does not exists.

    Hi,
    I am running an unattented installation of SQL on a server. I run it with the following configuration:
    ;SQLSERVER2008 Configuration File
    [SQLSERVER2008]
    ;************************* CORE ARGUMENTS *************************
    ; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will reflect the instance ID of the SQL Server instance. 
    INSTANCEID="MSSQLSERVER"
    ; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter. 
    ACTION="Install"
    ; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, and Tools. The SQL feature will install the database engine, replication, and full-text. The Tools feature will install Management Tools, Books
    online, Business Intelligence Development Studio, and other shared components.
    FEATURES=SQLENGINE,REPLICATION,FULLTEXT,AS,RS,CONN,IS,BC,SDK,SSMS,ADV_SSMS,SNAC_SDK
    ; Setup will not display any user interface. ***
    QUIET="True"
    ; Needed argument for silent installation
    IACCEPTSQLSERVERLICENSETERMS="True"
    ;*************************** OPTIONAL *****************************
    ; Displays the command line parameters usage 
    HELP="False"
    ; Specifies that the detailed Setup log should be piped to the console. ***
    INDICATEPROGRESS="True"
    ; Setup will display progress only without any user interaction.
    QUIETSIMPLE="False"
    ; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system. 
    X86="False"
    ; Use this parameter to install the English version of SQL Server on a localized operating system when the installation media includes language packs for both English and the language corresponding to the operating system.
    ENU="True"
    ; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature. 
    ERRORREPORTING="False"
    ; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature. 
    SQMREPORTING="False"
    ; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting
    Services (RS). 
    INSTANCENAME="MSSQLSERVER"
    ; Agent account name 
    AGTSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Auto-start service after installation.  ***
    AGTSVCSTARTUPTYPE="Automatic"
    ; Startup type for Integration Services. 
    ISSVCSTARTUPTYPE="Automatic"
    ; Account for Integration Services: Domain\User or system account. 
    ISSVCACCOUNT="NT AUTHORITY\NetworkService"
    ; The name of the account that the Analysis Services service runs under. 
    ASSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Controls the service startup type setting after the service has been created. 
    ASSVCSTARTUPTYPE="Automatic"
    ; The collation to be used by Analysis Services. 
    ASCOLLATION="Latin1_General_CI_AS"
    ; The location for the Analysis Services data files. 
    ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Data"
    ; The location for the Analysis Services log files. 
    ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Log"
    ; The location for the Analysis Services backup files. 
    ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Backup"
    ; The location for the Analysis Services temporary files. 
    ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Temp"
    ; The location for the Analysis Services configuration files. 
    ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config"
    ; Specifies whether or not the MSOLAP provider is allowed to run in process. 
    ASPROVIDERMSOLAP="1"
    ; Specifies the list of administrator accounts that need to be provisioned. 
    ASSYSADMINACCOUNTS=”CRB\dsstest”
    ; Startup type for the SQL Server service. 
    SQLSVCSTARTUPTYPE="Automatic"
    ; Specifies a Windows collation or an SQL collation to use for the Database Engine. 
    SQLCOLLATION="SQL_Latin1_General_CP1_CI_AS"
    ; Account for SQL Server service: Domain\User or system account. 
    SQLSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS=”CRB\dsstest”
    ; Level to enable FILESTREAM feature at (0, 1, 2 or 3). 
    FILESTREAMLEVEL="0"
    ; Set to "1" to enable RANU for SQL Server Express. 
    ENABLERANU="False"
    ; Specify 0 to disable or 1 to enable the TCP/IP protocol. 
    TCPENABLED="1"
    ; Specify 0 to disable or 1 to enable the Named Pipes protocol. 
    NPENABLED="0"
    ; Startup type for Browser Service. 
    BROWSERSVCSTARTUPTYPE="Automatic"
    ; Specifies which account the report server NT service should execute under.  When omitted or when the value is empty string, the default built-in account for the current operating system.
    ; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
    ; The domain part of RSSVCACCOUNT is a maximum of 254 characters long. 
    RSSVCACCOUNT="NT AUTHORITY\NETWORK SERVICE"
    ; Specifies how the startup mode of the report server NT service.  When 
    ; Manual - Service startup is manual mode (default).
    ; Automatic - Service startup is automatic mode.
    ; Disabled - Service is disabled 
    RSSVCSTARTUPTYPE="Automatic"
    ; Specifies which mode report server is installed in.  
    ; Default value: “FilesOnly”  
    RSINSTALLMODE="DefaultNativeMode"
    ; Full-Text filter launcher service account
    FTSVCACCOUNT="NT AUTHORITY\LOCAL SERVICE"
    I run the installation with the user crb\dsstest, but i get the following error:
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message: 
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data: 
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack: 
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message: 
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp: 
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Can anyone help me?

    Hi,
    I have tried to chech if it exists. If I add the user dsstest during the normal installation it is found. I am also logged in as the user dsstest. Then everything should be okay rigth, or is there anything else i can check?
    The following are the error details:
    2011-12-28 12:58:47 AS: Action: (Validation) Validating SysAdmin Accounts
    2011-12-28 12:58:47 AS: Action: Validation User Account (”CRB\dsstest”)
    2011-12-28 12:58:47 AS: Action: Validating Account
    2011-12-28 12:58:47 AS: Data: Account=”CRB\dsstest”
    2011-12-28 12:58:47 AS: Data: Account After Mapping = ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get account sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Attempting to get sid for user account ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: GetSidForAccount normalized accountName ”CRB\dsstest” parameter to ”CRB\dsstest”
    2011-12-28 12:58:47 Slp: Sco: Failed when querying buffer size
    2011-12-28 12:58:47 AS: Warning: Failed to retrieved Account SID. Reason: No mapping between account names and security IDs was done.
    2011-12-28 12:58:47 AS: Result: Error
    2011-12-28 12:58:47 AS: Result: Invalid
    2011-12-28 12:58:47 AS: Result: (Validation) Complete
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation for Analysis Service
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Entry
    2011-12-28 12:58:47 AS: Data:  Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Validate Collation Entry
    2011-12-28 12:58:47 AS: Data: Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Result: (Utility) Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: (Validation) Validating Collation Match
    2011-12-28 12:58:47 AS: Data: ASCollation=Latin1_General_CI_AS,SQLCollation=
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Detect Whether it is Valid Collation
    2011-12-28 12:58:47 AS: Data: Collation = Latin1_General_CI_AS
    2011-12-28 12:58:47 AS: Action: (Utility) Retrieving embedded content
    2011-12-28 12:58:47 AS: Data: Resource Name =Microsoft.SqlServer.Configuration.ASExtension.LCIDs.xml
    2011-12-28 12:58:47 AS: Result: (Utility) Success
    2011-12-28 12:58:47 AS: Data: Locale ID=0x0409
    2011-12-28 12:58:47 AS: Result: Valid
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: Action: Validating Start Mode
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Action: Validating Allow in Process
    2011-12-28 12:58:47 AS: Data: AllowInProcess=1
    2011-12-28 12:58:47 AS: Result: Success
    2011-12-28 12:58:47 AS: Result: (Validation) Success
    2011-12-28 12:58:47 AS: ----------------------------------------------
    2011-12-28 12:58:47 Slp: Hosting object: Microsoft.SqlServer.Configuration.AnalysisServices.ASConfigurationPublic failed validation
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Validation for setting 'ASSYSADMINACCOUNTS' failed. Error message: ”CRB\aml021” - User or group does not exists.
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp: Error: Action "Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction" threw an exception during execution.
    2011-12-28 12:58:47 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: ”CRB\dsstest” - User or group does not exists. ---> Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: ”CRB\dsstest”
    - User or group does not exists. ---> System.ApplicationException: ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    --- End of inner exception stack trace ---
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionEngine.RunActionQueue()
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.Workflow.RunWorkflow(WorkflowObject workflowObject, HandleInternalException exceptionHandler)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Configuration.BootstrapExtension.ExecuteWorkflowAction.ExecuteAction(String actionId)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionWithRetryHelper(WorkflowObject metaDb, ActionKey action, ActionMetadata actionMetadata, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
    2011-12-28 12:58:47 Slp:    at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)
    2011-12-28 12:58:49 Slp: Received request to add the following file to Watson reporting: C:\Users\dsstest\AppData\Local\Temp\tmp8278.tmp
    2011-12-28 12:59:02 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2011-12-28 12:59:02 Slp: Inner exceptions are being indented
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
    2011-12-28 12:59:02 Slp:     Message:
    2011-12-28 12:59:02 Slp:         ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:     Data:
    2011-12-28 12:59:02 Slp:       SQL.Setup.FailureCategory = InputSettingValidationFailure
    2011-12-28 12:59:02 Slp:       DisableWatson = true
    2011-12-28 12:59:02 Slp:     Stack:
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
    2011-12-28 12:59:02 Slp:         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun)
    2011-12-28 12:59:02 Slp:     Inner exception type: System.ApplicationException
    2011-12-28 12:59:02 Slp:         Message:
    2011-12-28 12:59:02 Slp:                 ”CRB\dsstest” - User or group does not exists.
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: ----------------------------------------------------------------------
    2011-12-28 12:59:02 Slp:
    2011-12-28 12:59:02 Slp: Error result: -2068578304
    2011-12-28 12:59:02 Slp: Result facility code: 1204
    2011-12-28 12:59:02 Slp: Result error code: 0
    Do you need more information then above? The above chech do not fail for the network service:
    2011-12-28 12:58:46 ACE: Formatting user name 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Formatted user name is 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword started with userName = 'NT AUTHORITY\NETWORK SERVICE', userNameRequired = 'True', mustBeDomainAcct = 'False'
    2011-12-28 12:58:46 ACE: Validating username 'NT AUTHORITY\NETWORK SERVICE' and password '<empty>'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Getting sid for service account 'NT AUTHORITY\NETWORK SERVICE'
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: SID for user account is 'S-1-5-20'
    2011-12-28 12:58:46 ACE: Validating service account is not LocalService
    2011-12-28 12:58:46 ACE: Validating service account is a user account
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 ACE: Validating service account can be used if current machine is domain controller
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 ACE: Checking if service account must be a domain account
    2011-12-28 12:58:46 ACE: ValidateUserNameAndPassword completed
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/SSIS/Public was found in the datastore.
    2011-12-28 12:58:46 Slp: Sco: Attempting to get network service account name
    2011-12-28 12:58:46 Slp: Sco: Attempting to get NT account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account from sid S-1-5-20
    2011-12-28 12:58:46 Slp: Sco: Attempting to get account sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: Attempting to get sid for user account NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: Sco: GetSidForAccount normalized accountName NT AUTHORITY\NETWORK SERVICE parameter to NT AUTHORITY\NETWORK SERVICE
    2011-12-28 12:58:46 Slp: The configuration object document /Datastore/ProductSettings/AS/Public was found in the datastore.
    2011-12-28 12:58:46 AS: ----------------------------------------------
    2011-12-28 12:58:46 AS: Action: Logging Input Values and it's Sources
    2011-12-28 12:58:46 AS: Data: Parameter=ASSVCACCOUNT,Source=ConfigFile,Value=NT AUTHORITY\NETWORK SERVICE
    Do you have any idea what is worong?

  • SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

    Hi,
    I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
    PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
    "processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
    report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
    Default' to data type int."
    My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
    Troubleshooting performed:
    1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
    reporting started throwing errors again.
    2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
    3. re-registered the SQL management Provider WMI class.
    mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

    Hi All,
    Finally found exact solution to the reporting error.
    Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
    It may already have been terminated. (rsRuntimeErrorInExpression)"
    Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
    primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
    Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
    Reporting Services Point in SCCM Primary Site, and then click apply.
    Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

  • Error message FI 759: Fund does not exist in FM area

    Hill!
    I have to make a distribution in CO-OM (tr KSV5) according to fund
    But if I customize fund as sender, choose fund from the fund catalog  and make a formal chek of cycle I see an error message FI 759: Fund does not exist in FM area. How can I make it go away?

    Hi Irina,
    As per the note 489315, you must choose a layout that contains the exact data for the active objects.
    When planning for non-FM company codes you will have to change the profile/layout that only contain the elements that are active in the company code.
    If you encounter error: KAFF002 while doing the above then please can you see if point 3 of note 555134 will help to by-pass the message.
    Once you add the field Fund and set it to optional you should be able to use planning.
    Note 555134:
    3.  The fields of the Funds Management are defined as 'Required entry
        fields' in the standard layouts, in other words depending on the
        permissibility of the initial value for a field an entry is always
        demanded. To prevent this there are two options:
        a) Copy the desired standard layout into an own (transaction KP65,
           KPG5, OPO1) and via "Extras -> Variables -> Variables definition'
           set the corresponding field to 'Optional". Then, add this layout
           to your planner profile with transaction KP34.
        b) Implement the attached program ZK555134 (correction instruction
           461025). After the entry of planning area and layout all fields
           of the Funds Management are set depending on your selection of
           'Optional' or 'Not optional' (standard system). Like this you can
           also change standard layouts. The check for the fields for which
           'initial' is not a valid value is still carried out.
    If you want to use FUND Accounting, I suggest you to read note 518610 for your reference. This note contains information about FUND Accounting and its effect.
    If you only want to use 'Fund' in Funds Management, you do not have to activate the 'Fund' account assignment element.
    If you activated the FUND account assignment element, which is at CLIENT level activation, the fund would always have to be filled as a required  entry field in CO, FI-AA and HR for all company codes in the client concern.
    Please also refer to notes 625262 and 659086.
    or re-import the standard planning layout from the client 000. In the note 320197 is descriped how to do this.
    I believe this will resolve your issue.
    Best Regards,
    Vanessa.

  • FRM-40800: User exit FND does not exist.

    Situation:
    I use Windows XP client - for development
    Forms [32 Bit] Version 6.0.8.28.0 (Production)
    The APPS server is on the Linux (RedHat):
    Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    Apps version: 11.5.10.2
    What I dis:
    - installed Oracle Forms on Windows XP
    - loaded JTFGRDMD.fmb in Forms with APPSTAND.fmb, FNDSCSGN.fmb
    - loaded loaded all the PL/SQL libraries and recompile them for Windows
    When I run JTFGRDMD I receive no compilation error but when the form run, I receive "FRM-40800: User exit FND does not exist.".
    Does anybody have an ideea why I get this error ?
    Thanks, Paul
    Note: I tried to find information on Metalink and other threads, but nothing was good for me.

    Hi,
    Hussein, I agree with you. However I need to do a customization on the form and test it (on Windows) before deloying it to the apps server(on Linux).Do the customization at the client side, make sure the forms compile and run successfully, then copy the fmb file to the server and compile it. By doing this, you should be able to run the form from the application.
    Under Forms (on Windows) I connect using apps/apps.When you compile the form on the server side, you will have also to provide the apps username/password, so the concept is the same. Do you still have an issue when accessing the form after compiling it on the server? If yes, then obtain the FRD file and post the contents of the file here (search the forum for FRD 11i).
    Regards,
    Hussein

  • Error 1070023 Configured Disk volume does not exist.

    Hi
    I installed Essbase 11.1.1.2 in stand alone mode. When I am trying to start Sample.Basic, I am getting the below error
    Error 1002097 Unable to load database Basic.
    The App log showed the following error
    Error 1070023 Configured Disk volume does not exist.
    Please help..

    So everything works when the volume is set to E?
    If so, you might be able to use DISKVOLUMES E in the essbase.cfg file which sets a default (for BSO cubes, at least), but you shouldn't have to do that.
    The DISKVOLUMES documentation says that the volume that contains your ARBORPATH is the one used by default. Not completely sure I trust that it's up to date, and isn't now ESSBASEPATH or something else, but regardless, do those variable all look to be set correctly? To be honest, that's a longshot, as I'd be surprised if a missing / incorrect value there wouldn't cause bigger problems...

  • Error 1075: The dependency service does not exist or has been marked for deletion

    Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
    Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
    snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
    In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
    not exist or has been marked for deletion."
    Rebooting gets me nowhere.
    In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
    Any ideas, please?

    Hi,
    Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
    Kim Zhou
    TechNet Community Support

  • Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

    Hi to all,
    I tried to compile my .sln with VS2010 but I had this error.
    error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
    It occurs only compiling with win32 configuration but not with x64 one.
    Ideas?
    Thank you in advanced

    In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
    If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
    Visual Studio 2012 Compatibility
    Visual Studio 2013 Compatibility
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Part of Photoshop isn't functioning.  Under adjustments, when HDR toning is clicked on I get a code:  Error 48: File or folder does not exist.  Line:11  - $.evalFile(g_StackScriptFolderPath   "StackSupport.jsx");  How can it be fixed?

    The phone company was here working on something while I was gone.  They sat down at my computer (iMac) and since then HDR toning doesn't work.  Get the code:   Error 48: File or folder does not exist.    Line: 11     ->  $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx");   How can this be fixed?   

    Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

  • HDR Toning Error 48: File or Folder Does Not Exist

    After migrating to a new computer HDR Toning is no longer available.
    I get a pop-up: Error 48: File or Folder Does Not Exist
                             Line 11  -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
    What's the fix for this, if anyone knows?
    Thanks.

    Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).

  • Ruler Tool- Error 48: File or folder does not exist

    I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
    Error 48: File or folder does not exist.
    Line: 31
    ->  $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
    Any ideas?

    i'm getting the exact error using Windows XP with CS5.5
    error 48: file or folder does not exist
    line: 31
    -> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
    HELP!!!
    someone
    hello ... anyone out there?
    how do we get support for this error?
    e

  • Error(27,78): Reference PartnerLink1 does not exist as wire target

    I am starter to BPEL.. when i am trying to invoke webservice(http://www.webservicex.net/convertMe...ight.asmx?WSDL) i am getting these errors
    Error(27,78): Reference PartnerLink1 does not exist as wire target
    Error(90): Element 'targets' not expected.
    Edited by: 974508 on Dec 2, 2012 8:09 PM

    maybe you first created the partnerlink in the bpel instead of the composite?
    create the reference in the composite, see if you get the wire from the bpel to your convert-service and then go to the bpel process and use the invoke to call the partnerlink
    if you did all this (recreating the service in the composite would maybe be the easy fix)

  • Build error :package com.sun.javadoc does not exist

    Question from a Turing machine expert who is new to Java.
    Trying to run a sample program from Richardson's book "Java JDK 5 Edition" Chapter 1.
    In Netbeans 5.5 receive build error :package com.sun.javadoc does not exist
    for "import com.sun.javadoc.*;"
    Believe missing classes are in tools.jar in C:\Sun\SDKee5SDK\jdk\lib
    How do I define this to Netbeans and/or JDK?
    Using java_ee_sdk-5_01
    and netbeans-5_5-windows downloads.
    Platform is XP.
    Netbeans has been updated to date.
    Appreciate.

    sony_tj wrote:
    D:\Xyz.java:22: package com.sun.javadoc does not exist
    import com.sun.javadoc.*;After getting this error, I have set my classpath to C:\Program Files\Java\jdk1.5.0_03\lib\tools.jar. But still the error persists. Could anyone please tell me how do I solve this problem.You have failed in setting your classpath in that case.

  • Build Question: error 7 occurred at source does not exist

    I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
    7, It works well. But when I try to build it. I got error.
    I first use the mass conpile to compile VIs and then build the exe
    with default settings. I got:
    Error 7 occurred at source does not exist
    Possible reason(s):
    LabVIEW: File not found. The file might have been moved or deleted,
    or the file path might be incorrectly formatted for the operating
    system. For example, use \ as path separators on Windows, : on Mac OS,
    and / on UNIX.
    NI-488: Non-existent board.
    But It does not point out which file does not exist.
    Anyone can help me out?

    Hello yqin,
    Here are some more KnowledgeBases that may pertain to your issue.
    Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
    Why Do I Get Error 7 When Building an Executable from a Build Script?
    Error 7 at Invoke Node When Building a LabVIEW Executable
    If the above KnowledgeBases do not work, we will want to try the following procedure.
    1. Open your Main VI.
    2. Hold + a
    nd click the run arrow (forces recompile).
    3. Close the VI and mass compile it.
    4. Keep the VI closed and build the application from scratch (do not use a script).
    5. Ensure that all VIs called dynamically are included as support files before building.
    Please let me know if you have any questions,
    Matt
    Keep up to date on the latest PXI news at twitter.com/pxi

Maybe you are looking for

  • How to hide table column based on country molga value

    Hi Experts, I am doing some enhancement in ess application. I want to hide table column based on country code i.e. Molga value. I want to hide coulm for only Japan country reset of them i need to be show those coulmn. Could you please provide me a sa

  • Changing an email address throughout the Enterprise on schedule reports

    We will be changing our email address from fsc.edu to fitchburgstate.edu. I have been told I need to manually change this address for all scheduled reports on the Enterprise. Is there an easier way to do this instead of going into each report? Thanks

  • Lion download Question

    Is the Lion download a one time only download from apple, or can you download it again if needed?

  • I'm trying to update my iPad 2

    I'm trying to update my iPad 2 to iOS 7.0.3 and it says it's downloading then an error message pops up and says iOS downloading failed. I've tried 7 times now and it says the same thing. I've turned the tablet off and back on and I've made sure it is

  • Netflow on CRS (MPLS problem)

    Hi all, I have configured netflow on CRS platfom, but it seems it doesn't capture/export any mpls information(traffic) on mpls enabled interfaces. My configuration is: flow monitor-map xxxxxxx  record mpls ipv4-fields  exporter xxxxxxx  cache entries