Error after process a Tabular model

Hi,
When I process a Tabular model, sometimes I have the next error
"Error moving file '\\?\G:\filename.80.det.xml_TEMP_3804' to file '\\?\G:\filename.80.det.xml': ." I see in a XEvents trace that process finished ok and then throw the error.
Does somebody know the reason?
Regards,

Hi Numer04,
It's hard to give you the exact reason that cause this issue. However, you can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

PO Creation error after processing bid invitation

Hi Guys,
I need small help from you. I have created one bid invitation with out shopping cart. I had processed the bid invitation. Few vendors have submitted their bids. Purchaser had accepted those bid and approver had approved those bids. Now I have the option to "Generate PO" and "Create contract". If I click on Generate PO button I am getting an error that Purchase order has not been created.
I am unable to process further. Please help me. I have maintained PO number range in both the systems means in R/3 and SRM. Transaction types are also maintained in both the system. What else settings I need to configure?
if i click on "Create contract" buttion then I am able to create Contract in SRM system in held state. When this Purchasing contract will be copy to Backend system? once I chance the Contract status to release then this will be copied to backend?
My requirement is to create Purchase Order ?
Regards
Apparao a

Hi
Please provide your system version details.
In the bid invitation, the Follow-On Document field must contain the entry Purchase Order or Contract.
· In the case of bid invitations that are created manually, purchase orders are local only (product category is not relevant). In the case of direct material purchase orders, a copy (that cannot be changed) is created in the backend. Whether or not it concerns direct material needs to be stated in the item details in the bid invitation. You must specify the goods recipient and purchasing group. Also:
-> Outline levels can be displayed in a local purchase order
-> Bid invitation texts, bid texts, and documents are transferred to the purchase order (however not internal notes).
Also refer to this link for configuartion settings ->
http://help.sap.com/saphelp_srm50/helpdata/en/d3/133dcd5641b244a60578baa996a597/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

To capture the error after processing LOGON function

Dear friends
I want to capture the exception after the execution of the LOGON function. Scenario i need to capture is when the user account been locked, password expired and password will expire in N days.
I made the user account locked and password expired through backend.
In the when-button-pressed trigger I make a call to the procedure where the Logon function is coded
Function P_CONNECT (io_message IN OUT varchar2)
Account_locked EXCEPTION;
Password_expired EXCEPTION;
Password_will_expire EXCEPTION;
PRAGMA Exception_Init (Account_locked, -28000);
PRAGMA Exception_Init (Password_expired, -28001);
PRAGMA Exception_Init (Password_will_expire, -28002);
begin
begin
Logon( L_username,
L_string,
FALSE);
exception
when Account_locked then
io_message := 'acc_loc';
return FALSE;
end;
if form_success then
/* code with certain activities*/
end if
end;
During the execution of this procedure, i tried to capture the account_locked for example. I couldnt.
Then I created on_error trigger at the form level. I couldnt able to capture as well.
Also I need the form errorcode (FRM 4....) equvalent to -28000. -28001, -28002.
Or any other suggestions are welcome
Thanks
Sada

Hi,
I got struck with the similar case. i.e.., if the user enters the login details incorrectly or login details are not provided then I've used exec_sql package. This package is been used to check whether a connection can be established or not. If the connection cannot be established then I'll pop up a message saying that the login details are incorrect.
Though my case is different than that of yours, but i think that this will give u some idea to kick start to your solution.
Regards,
Alok Dubey

Processing of a deployed Tabular model inside SSDT

Hi,
operating inside SSDT, does it exist a manner to process a tabular model (or a table/partition) already deployed on the SSAS instance?
I know that it is possible to process only the workspace data.
Thanks

Hi Pscorca,
According to your description, you want to process data for a tabular model which had already been deployed on the SQL Server Analysis Services instance. When authoring your model project, process actions must be initiated manually in SQL Server Data Tools
(SSDT). After a model has been deployed, process operations can be performed by using SQL Server Management Studio or scheduled by using a script. So we cannot process data for a tabular model which had already been deployed on the SQL Server Analysis Services
instance.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product.
Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Error about using a concatenated calculated column in a SSAS Tabular model

Hi,
in a my tabular model I've added in a dimension table a calculated column concatenating a code and a description. The code is used to create a relation between a fact table and this dimension table.
When I try to use the tabular model inside Excel and select the concatenated column as a filter I've this error message:
I've tried to recalculate some times the tabular database after the deployment of the model changes and I've tried to run a full process of the entire database but any results.
Any suggests to me in order to solve this issue, please?
Thanks

Hi, I've solved. The concatenate formula was with "+" operator and not "&".
But during the column creation I've any errors also if the model in SSDT was empty.
Bye

Error while importing data in SSAS Tabular Model

I am new to the concept Tabular Model in SSAS 2014.
I am trying to create one tabular model based on Adventureworks DW 2014.
I am getting below error while importing tables to create model.
"OLE DB or ODBC error: Login failed for user 'ASIAPAC\CSCINDAE732028$'.; 28000.
A connection could not be made to the data source with the DataSourceID of '98c2d415-1e84-469c-a170-2bcacd779c1a', Name of 'Adventure Works DB from SQL'.
An error occurred while processing the partition 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e' in table 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e'.
The current operation was cancelled because another operation in the transaction failed."
But while creating the Datasource, it has created successfully (below img)
But while importing the facing the below error.
Note:
I have multiple instances in my system with unique names.
Is this causing any ambiguity issues in selecting right instances?

Hi Naveen，
Based on your screenshots, you fail to open a connection to the data source. Right?
In this scenario, the first screenshot you post is for creating a connection to server with the current windows authentication, not for connecting a data source. So the "Test Connection succeed" means your current windows user can connect
to server, not connect to the database your selected in the dropdown list. Then you click next, you can choose account to access the data source. Based on the information, your service account "'ASIAPAC\CSCINDAE732028$" doesn't have permission to
access the database you selected. Please grant the permission for the service account in SSMS.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
If you have any feedback on our support, please click here.

Error while doing preivew in tabular model

I added a new column to base view on which I have a tabular model. In order for me to see the new column I go to the table TAB in SQL data tools and from property window I click on the source and when I hit refresh it always error out with time a time
out issue. But if I process the table first and then do a refresh from source it works. Don't know why is that and how can I fix it.
Moyz Khan

Hi Moyz Khan,
It looks like Timeout property is applicable only in SSMS as you are getting issues to preview data in SSDT ,Updating timeout may not be the right solution !
I think DataSourceID in your second screen shot is not a Bug,When you provide Datasource SSDT automatically creates GUID I hope.
I am not able to replicate your situation at my end.but
Please check following URL
http://blogs.msdn.com/b/karang/archive/2013/07/26/tabular_2d00_error_2d00_while_2d00_using_2d00_odbc_2d00_data_2d00_source_2d00_for_2d00_importing_2d00_data.aspx
and also Robin Langell mentioned in comments in above URL saying changing provider to SQLOLEDB solved issue
Give it a try !
Prathy
Prathy K

Error in import : tabular model with Oracle

Hi there,
I seems to be getting very strange error.
I am trying to build tabular model over oracle db. I get test successfull for connection, able to validate the query, and in query designer, if i execute it shows me data too. But when i press finish, it gives me error while importing.
ERROR from import screen
OLE DB or ODBC error: ORA-01033: ORACLE initialization or shutdown in progress.
A connection could not be made to the data source with the DataSourceID of '8ffdbfd9-e21f-442d-9040-b66dc074c87d', Name of 'XXXXXXX'.
An error occurred while processing the partition 'XXX_3fc019fa-4d1a-4d39-9317-3dcde3297579' in table 'XXXXXX'.
The current operation was cancelled because another operation in the transaction failed.
I cant figure this out,Even in Execl powerpivot i am able to pull the data in.
Any idea..TIA
Rahul Kumar, MCTS, India, http://sqlserversolutions.blogspot.com/

Hi Rahul,
Based on my research, for the error “OLE DB or ODBC error: ORA-01033: ORACLE initialization or shutdown in progress.
A connection could not be made to the data source with the DataSourceID of '8ffdbfd9-e21f-442d-9040-b66dc074c87d', Name of 'XXXXXXX'.”
It seems that it related to Oracle database, here are some links about how to troubleshoot this issue, please see:
ERROR - ORA-01033 oracle initialization or shutdown in progress
ERROR - ORA-01033 oracle initialization or shutdown in progress
If the issue persists, since I am not an expert on Oracle database, you can post the question on the Oracle forum, so that you can get more help.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Tabular model process-took 4 HOURS instead of normal 10 minutes

There must be some sort of log I can view or review to get a better look inside the process?
When I refreshed my development project (which is using the same server for workspace) it takes less than 10 or 15 minutes.
Then I deployed it to my server and after 35 minutes I closed out of SSDT BI as it appeared to have frozen.
I then deployed again with no processing.
After that I processed manually through SSMS by using Process (but scripted out) for a process full.
After 12 or so minutes most everything appeared to have processed and the last feedback was on:
CREATE MEASURE 'PROFIT_WORKSHEET'[Less Cost Over Profit -Indirect Costs]=CALCULAT ..."
I could see that the SSAS server was still working via CPU activity, but no futher messages were reported to SSMS. Then after 3 hours and 45 minutes later it claimed to have completed and displayed:
"Execution Complete" (it had lots of white space above it, around 20 or so blank empty lines which was odd)
The tabular model seems to be functional, and it is less than 350 MB in size (almost the exact same size of my development workspace model) so I am at a loss as to why the delay like this?
Any suggestions, thoughts?
It returned 40 million rows, but I have other models that return more and process in 3 or 4 minutes so it is very odd (and it isn't 400 million, just 40 million)
Thanks!
appeared

Hi OneWithQuestions,
According to your description, you create a SQL Server Tabular Model project which takes 10 minutes to process in SQL Server Data Tools, the problem is that it takes 4 hours to process this database in SQL Server Management Studio. So you need the detail
log that inside the process, right?
In your scenario, you can enable SQL Server profiler to monitor the queries fired by the process, once you find some queries took a very long time to run, consider creating the smaller cube partition or optimizing the query by adding index or partition to
improve process time.
http://www.mssqlgirl.com/process-full-on-tabular-model-database-via-ssms.html
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Error during the attach of a Tabular model - SSAS 2012

Hi,
I've changed the DataDir for a SSAS Tabular instance by specifying another drive letter and a path like "E:\Microsoft SQL Server\MSAS11.SQLSERVER2012\OLAP\Data".
After the restarting of the SSAS service I'm trying to attach the tabular model but when I select a folder I've an error about the specified folder is not valid because it doesn't correspond to the naming convention.
How can I solve this issue, thanks?

Hi pscorca,
After you rename the "DataDir" path for SSAS Tabular instance, please copy Tabular database files to the new location(E:\Microsoft SQL Server\MSAS11.SQLSERVER2012\OLAP\Data). Then, please follow the steps below:
Right-click on the Tabular model instance-> Properties, switch to "General" page.
Select "Show Advanced(All) Properties" option, and then set the following value for "AllowedBrowsingFolders" property.
C:\Program Files\Microsoft SQL Server\MSAS11.TABULAR2\OLAP\Backup\|C:\Program Files\Microsoft SQL Server\MSAS11.TABULAR2\OLAP\Log\|C:\Program Files\Microsoft SQL Server\MSAS11.TABULAR2\OLAP\Data\|E:\Microsoft SQL Server\MSAS11.SQLSERVER2012\OLAP\Data
Restart SSAS Tabular instance.
When you attach a Tabular database, please select the corresponding database which under "E:\Microsoft SQL Server\MSAS11.SQLSERVER2012\OLAP\Data" path.
Please let me know if you have any questions.
Regards,
Elvis Long
TechNet Community Support

Tabular model: First deployment to server takes 120 min to process, subsequent ProcessFull 15 min?

I have noticed this several times now and I do not understand it.
I have a model with ~45 million rows in the largest table and the first time I deploy to the server and then execute a ProcessFull (via script) it takes over two hours to complete.
*Note when I deploy from BIDS I have it set as Processing Option: Do Not Process. So it doesn't process until I explicitly call it.
However, the next day (or could be later same day) I kick off the same ProcessFull and it finishes in 15 minutes.
So it appears the FIRST time it is deployed (as in the model did not exist historically, prior to deployment there was no tabular database called "MyTestModel" on the server) it takes an extremely long time.
Subsequent ProcessFulls are very quick.
Why is that? Has anyone else encountered that?
When I watch the progress of the process full script I see it finishes retrieving all the data in a relatively decent amount of time, for example the 45 million row table:
Finished processing the 'BigTableWith45MillionRows' table.
So I know it has completed all its data retrieval operations.
Then it moves onto:
Processing of the 'Model' cube has started.
Processing of the 'ACCOUNT' measure group has started.
and many more various measure groups
later I get:
Finished processing the 'ACCOUNT' measure group.
Finished processing the 'Model' cube.
It moves onto to it's "CALCULATE;" statements at that point with "CREATE MEMBER CURRENTCUBE.Measures".... and so forth.
It would be most helpful if I could see which ones it had started but not yet stopped (it appears to "Started processing the 'random' hierarcy" or calculated column, or whatever and then a few lines later it will say "Finished" but other
than looking through them all by hand and matching up every Started with Finished trying to find one with OUT a "Finished" I have no way of knowing which are still processing.
It would be helpful to know "item X takes 2 hours to finish processing"
It tends to take the longest amount of time in the processing hierarchy and calculated column phase.

The default events in profiler are fine. You will likely focus on Progress Report End. How are you running ProcessFull? An XMLA script or from right-clicking on the database or from right clicking on a table and selecting all tables?
http://artisconsulting.com/Blogs/GregGalloway
Right click on database, go to process, select process full and then script (single database not each table).
<
Processxmlns="http://schemas.microsoft.com/analysisservices/2003/engine">
<
Type>ProcessFull</Type>
<
Object>
<
DatabaseID>MyDatabaseName</DatabaseID>
</
Object>
</
Process>
I finished a full process yesterday and captured the info.
The biggest for CPUTime (I noticed duration would be long but no CPU time, it seemed like it would flag things as having started but due to dependencies they just sat and waited?)
was my larger hierarchy: Progress Report End, for CPU time of 11925840ms or 3.3 hours. Duration was 11927999ms.
After that was my 45 million row table at CPU time 715296 and duration of 860773 or 14 minutes.
It is interesting because a normal ProcessFull is ~15 minutes, so it seems that the hierarchy rebuild is what is "killing me" on these.
A variety of Object Created events had high durations but NULL CPU time, seems like those were dependant on earlier events maybe??
Regardless, my big hierarchy was the longest at the 3.3 hours.
It has 173,000 unique rows in the hierarchy (again like Account primary, secondary, though 6 or so levels deep, 1.2.3.4.5.6 etc...)

Error while processing dimension after add or delete property

Hi Experts,
I use BPC for MS SP6 with SQL Server 2008. I detected a problem while processing dimension after add or delete property.
The error message is: u201CMemory error: Allocation failure : Not enough storage is available to process this command. Error Code = 0x8007000E, External Code = 0x00000000.u201D
I tried to truncate and drop dimension tables and process dimension again, and it doesnu2019t work.
Any idea?
Thanks a lot for your support!
Albert

Hi Sorin,
Yestarday in the afternoon, we added a Property at another Dimension, and we continued having the same problem: we had errors when processing that dimension, but after restarting the server, we can process dimension.
Looking at the Event Viewer, at 'OutlookSoft log' environment, the following error appears:
<<
3/28/2011 6:57:15 PM
ModuleName : Olap9Manager - DeleteDimension
Message : Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Error Code = 0x8007000E, External Code = 0x00000000:.
Stack :    at Microsoft.AnalysisServices.AnalysisServicesClient.SendExecuteAndReadResponse(ImpactDetailCollection impacts, Boolean expectEmptyResults, Boolean throwIfError)
   at Microsoft.AnalysisServices.AnalysisServicesClient.Alter(IMajorObject obj, ObjectExpansion expansion, ImpactDetailCollection impact, Boolean allowCreate)
   at Microsoft.AnalysisServices.Server.Update(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.Server.SendUpdate(IMajorObject obj, UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings, ImpactDetailCollection impactResult)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options, UpdateMode mode, XmlaWarningCollection warnings)
   at Microsoft.AnalysisServices.MajorObject.Update(UpdateOptions options)
   at Osoft.Services.Platform.YukonAdmin.Olap9Manager.DeleteDimension(String strAppset, String strDimension, String strCube, String dimTablePrefx, Boolean bDeleteFromDB, String& strMsg, Boolean bOnlySharedDim)
>>
Any idea in order to identify the root cause?
Thanks in advance,
Albert

Could not archieve file after processing error in Rwb of sender adapter

Till today afternoon it is running fine.
The rpocess here is we will keep the files in FTP site. and pi polls and places the files in NFS Mount server AL11(FILE/STAGING).
Now these file will be process from FILE/STAGING to FILE/PROCESS in al11 .
Then proxy get trigerred and sends the data to sap where workflow will be trigerred.
now the issues file is getting polled from ftp and placed in file/staging folder perfectly.
Then the file needs to be moved to file/process folder using file adapter. here the issue is coming
error is as shown below
Time Stamp Message ID Explanation
Could not archive file '/FILE/Staging/20100517112845_140011140001.tif' after processing
com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to commit transaction: The transaction has been rolled back: com.sap.engine.services.ts.transaction.TxRollbackException
I had done the cache refresh still the problem persists.

HI,
1. check whether you have authorization for write access.
2. Check the path provided for process.
3. Ensure both the staging and the process paths are different.
Thanks,

PO status "ERROR in PROCESS" after confirmation

Hello Experts,
problem is :
When i create Purchase order its successfuly gets replicated in the Backend as we are on ECS scenario.Now when i create Confirmation the confirmation is also successfully created in the backend system but PO status gets changed to "ERROR in PROCESS" . i check in RZ20 and error is : "Purchase order 2400002371: Transfer Failed; Resubmit" means Application error while updating purchase orders in the back-end system.
I check my port settings and message type in partner profiles looks OK to me otherwise Confir mation will not cretae in the backend system but yes i can see its created and all my data is fine then why for all the Purchase order after creating confirmation status gets Change ?
Thanks in advance
Smriti

Hi Smriti,
Try executing the function module BBP_PD_PO_TRANSFER_EXEC_V2 using SE37 transaction by giving the header GUID of P.O.
Please take the GUID from BBP_PD transaction by giving the P.O number as input and BUS2201 as transaction type.
Please check the P.O status after executing the above function module.
Is this happening for all P.Os once the confirmation is posted or for any specific P.Os (2 P.Os as mentioned by you).
Let us know the outcome to help you further in resolving this issue.
Regards,
Teja

Limit PO on approval after any change is going in to Error in process

Hi,
We have a problem where one a LIMIT PO is created and ordered and if we make any chnage in the PO the status is changed to Awaiting Approval and on approval, the status is setting as Error in Process (EIP) instead of Ordered.
Application Monitor show following errors - The data entered is correct and have no issues. Not sure wht change is not updating in backend and showing EIP.
Instance of object type PurchaseOrder c ould not be changed
Purchase order still contains faulty items
In case of account assignment, please enter acc. a ssignment data for item
PurchOrder Transfer failed
This is issue is coming after applying SP 15
Thanks,
Piusha

Hello,
We have recently patched our ERP system to SP 18 and SRM is on SP 15 and we are experiencing a similar issue, although our issue is with using statistical order codes linked to cost centres on normal orders not limit orders which are not transferring to the backend correctly.
I have a high priority OSS call open with SAP and as of yet haven't had a response, I suspect they are looking into a note.
Before finding this issue, we had an issue with General Ledger codes not transferring to the backend from SRM, SAP advised they had changed the BAPI_PO_CREATE1 to bring it into line with ME21N.
In doing so, it resulted in us needing to change our config and apply various notes, some of the notes below may be of use to you:
1464524
1507715
1549597
1487572
It is possible all of these issues are linked to the BAPI change but I am waiting for SAP to get back to me to see if it is.
I also have another issue, again in the monitors I have the error:
PurchOrder : Purchase order still contains faulty items
PurchOrder : Sum of quantities >2< larger than total quantity
PurchOrder : Transfer failed
Have any of you got this issue and able to provide any information? I'm continuing to investigate but I think I may need to raise another OSS message as I can not see anything wrong with the purchase orders.
Thanks in advance
Lisa

Error after process a Tabular model

Similar Messages

Maybe you are looking for