Error after switching dimension ROLAP to MOLAP
Hi all,
I have a ROLAP dimensions that work well. Today I switched it to storage type MOLAP, because I want to implement it in Oracle OLAP. In the Data Object editor it is fine, and validation is successful.
However, when I use it in a mapping and validate the mapping, I get the message:
VLD-5008: The dimension D_DIM_BUDGET_TYPE_M has been rebound since the operator D_DIM_BUDGET_TYPE_M has been synchronized.
Synchronizing doesn't help. I think there are some ROLAP properties 'stuck' on the MOLAP object definition and I can see happening that I will have to create this MOLAP dimensions by hand. (If it was only this one, that would be fine, but I have a bunch...)
We use Oracle 10.2.0.3 on Linux.
Can anybody give me feedback on this?
Any help appreciated!
thanks, Ed
Hi all,
It looks like I found the cause and solution in a last attempt to find the source of this problem.
Since the message used the word 'rebound' I thought of the ROLAP dimension which was bound to a relational table. That binding was still in effect.
After opening the MOLAP dimension in the Object Editor again and choosing Object - Unbind, the effect was undone and the dimension is now usable in the mapping!
Apologies for the unnecessary thread, but maybe it helps and saves someone time in future, when searching for the same error.
Regards,
Ed
Similar Messages
-
Keyframe error after switching my windows to English interface. How do I fix it?
(I got a Keyframe) Error after switching my windows to English interface, I could save and open projects normaly! Unfortunately damaged projects still didn't worked... But the new once are ok, and I hope that error won't happen again! But guys from http://www.premiere-pro
tengo estos errores.
Message was edited by: Kevin Monahan
Reason: Next time create a shorter title, then put the text describing your issue on the next page.Hi C Del Producciones,
Uninstall iCloud. See this forum post: Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
Thanks,
Kevin -
Error upon error after switching from VS Express to VS Community
Hello,
I recently uninstalled VS Express and installed VS Community. I'm making a WP 8.1 app using WinRT. After opening the app which I was working on in Express before I uninstalled it, and debugging it to my device I get the error
The project needs to be deployed before it can be started.
Verify the project is selected to be deployed in the Solution Configuration Manager, or deploy it explicitly by clicking one of the Deploy commands in the Build menu.
So I checked the Build > Configuration Manager and sure enough, the WP project is checked to be built and deployed in Debug. So I tried Build > Deploy, but that got me a new errors, saying:
The type or namespace name 'Phone' does not exist in the namespace 'Windows' (are you missing an assembly reference?)
The type or namespace name 'BackPressedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
in App.xaml.cs
Online searches tell me to go to the object browser and add the Windows.winmd reference to my project.
This didn't fix it. I also tried adding Windows.winmd in the Reference manager, but I get the error
A reference to 'C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.1\Tools\MDILXAPCompile\WinMDs\Windows.winmd' could not be added. This component is already automatically referenced by the build system.
I tried unloading and reloading the WP project and Shared without success. When I try to debug the app on my device again, the "The project needs to be deployed before it can be started." error persists, and I get an additional error in the
error list:
Error : DEP0500 : The folder "C:\Data\SharedData\PhoneTools\AppxLayouts\0fd49144-a889-4909-9748-2cb07127ed26VS.Debug_AnyCPU.Aria" could not be deleted.
Access to the path 'HelpPage.xbf' is denied.
I don't even know where the cause lies anymore: my reference assemblies or some debug folder on my phone which I can not access. What do I need to do to fix this?Hi Rob,
Thanks for the advice. Other apps work fine, so it's just this app.
The app was removed somewhere along the line (during rebuilding or something?) so there's no way for me to remove it from the app list. Did a Clean build, making sure there were no files in the obj and bin directories, but that didn't solve the issue.
The two other erros about assembly references had to do with me thinking I was working in MyProject.WindowsPhone whereas I was in MyProject.Windows (oops!), so I figured that part out.
What remains is that when I go to deploy the app onto my device I still get error DEP0500, so I guess as you thought it has to do with that file getting stuck. Is there a way to manually browse to C:\Data\SharedData\PhoneTools\AppxLayouts and delete
that entire folder? -
ITunes store errors after switching to new computer
I am in process of moving everything from one Mac to another. I'm doing it by hand so I don't carry along all the old cruft left behind by programs that I deleted long ago. I've done this before without problems, but this time iTunes is giving me some trouble.
I can log in to the Store and access my profile, and I can play music that is already in my library. But when I try to download updates to some of my iPhone apps, or an album I pre-ordered that is now ready for pickup, I get one of two messages:
We could not completely your iTunes Store request. An unknown error occurred (-4).
Could not purchase "". An unknown error occurred (3027).
Google has failed me completely on figuring out what those errors really are. Does anyone know how to fix this? I am assuming the problem is with me and that the store really isn't having issues today.
Thanks in advance,
janineIt turns out that the problem was that I had reached my limit of five authorized systems on my iTunes user, and had to de-authorize my old system and authorize the new one. The error message could be a lot more helpful....
-
Processing error when doing a drillthrough agianst a Rolap dimension, working with MOLAP
Hi,
I'm having a drillthrough dimension (fact) that i'm using for drillthrough scripts. One thing that I have come a cross is that I get processing errors when I run queries agianst a ROLAP dimension where as it works agianst the same dimension set
as MOLAP. This is kind of confusing me.
The error message i get is like this one:
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined
limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while the 'Journal NO' attribute of the 'GLFact' dimension from the 'XXX' database was being processed.
I found a article about this
http://sqlblog.com/blogs/marco_russo/archive/2009/01/17/issues-executing-a-drillthrough-with-a-rolap-dimension.aspx
But I have set KeyDuplicate, Keynotfound, Nullkeyconvertedtounknown and NullKeynotallowed to ignoreerror and still it doesn't work.
So my questions are 2:
1. Do anyone have a solution for me? Or having any thoughts about this?
2. When switching over to MOLAP the processingtime takes about 30 min. How can i decrease this to a minimum?
This is all implemented in SSAS 2005.I'm getting the exact same error when attempting to drill down on a rolap dimension associated to the cube. the cube is molap, but the dimension is rolap to reduce processing time (processing dimension using molap spike my 4 core processing to 100%
for 4 minutes due to all the select DISTINCT on the attributes (about 10)).
I too have seen the article about KeyDuplicate but I think this is a different issue. Anyone figure out the problem?
Version: SSAS 2012 SP2
Example of error:
Server: The current operation was cancelled because another operation in the transaction failed. Errors in the OLAP storage engine: An error occurred while the 'City' attribute of the 'NameAddress'
dimension from the 'MyDatabase' database was being processed. Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation. -
After installing OS X Mavericks on myMacBook Pro the Canon IRA 6055 printer gives me
"Open error. Switch the printer off and on, and then start the print job again.: 16013"
Any sugestions?This is the new problem
I pinged the ip address and i looks to be working
So I'm not sure how to procead
I nstaled the lates driver package also -
"Class Not Registered​" after switching from 32-bit to 64-bit LabVIEW.
I recently upgraded LabVIEW 2012 from 32-bit to 64-bit. Now I'm getting an error that says "Class not Registered". It still works just fine with the 32-bit version.
Thank you Nathan and Sunshine. The problem is I didn't build the program - it came with the instrument. As far as I can tell this is what's going on: The vi's are replete with these activeX objects - all communication with the instruments is done through invoke and property nodes. After switching to 64-bit the very first sub vi has an error at the very first command (Err (-2147221164)). It's a reference (seemingly to a class but I actually have no idea what that means) passed to the "Open Automation Function". I'll attach a screen shot for the sake of overkill.
Attachments:
labviewerror.png 20 KB -
Bus/io errors after resume from suspend to ram
Something very strange happened today. When I woke my computer out of suspend today, the BIOS made a bad beep sound (once, high pitched, the error kind of), but booted anyways.
After starting up, I tried starting programs like sonata, gnome-mplayer, but both failed with either an "io error" or "bus error". Strangly, I also tested "df" an it worked.
That happened the first time, but I'm worried it's gonna happen again, because I have NO idea what could have failed.
pm-suspend log looks fine
Initial commandline parameters:
Sa 27. Mär 02:30:54 CET 2010: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-dpms-on --quirk-dpms-suspend --quirk-vbe-post --quirk-vbemode-restore --quirk-vbestate-restore --quirk-vga-mode-3
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux segfault 2.6.32-ARCH #1 SMP PREEMPT Mon Mar 15 20:44:03 CET 2010 x86_64 AMD Phenom(tm) II X4 940 Processor AuthenticAMD GNU/Linux
Module Size Used by
it87 18948 0
hwmon_vid 2756 1 it87
ipv6 283335 30
nfs 295530 0
lockd 65788 1 nfs
fscache 39679 1 nfs
nfs_acl 2335 1 nfs
auth_rpcgss 40448 1 nfs
sunrpc 186318 5 nfs,lockd,nfs_acl,auth_rpcgss
nvidia 9515743 48
cryptd 6076 0
aes_x86_64 7420 1
aes_generic 26178 1 aes_x86_64
fuse 58757 2
joydev 9800 0
usbhid 38471 0
hid 75813 1 usbhid
arc4 1354 2
ecb 1953 2
snd_seq_dummy 1439 0
snd_seq_oss 29023 0
snd_seq_midi_event 5316 1 snd_seq_oss
snd_seq 50558 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 5181 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 39011 0
snd_mixer_oss 17299 1 snd_pcm_oss
nouveau 428060 0
ttm 46450 1 nouveau
drm_kms_helper 23817 1 nouveau
drm 159774 3 nouveau,ttm,drm_kms_helper
i2c_algo_bit 4935 1 nouveau
snd_ctxfi 90523 1
ath5k 125370 0
ohci_hcd 21485 0
snd_pcm 70222 2 snd_pcm_oss,snd_ctxfi
mac80211 166738 1 ath5k
ath 8400 1 ath5k
snd_timer 18799 2 snd_seq,snd_pcm
cfg80211 122783 3 ath5k,mac80211,ath
rfkill 15228 1 cfg80211
edac_core 34056 0
snd 57408 10 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_ctxfi,snd_pcm,snd_timer
soundcore 6095 1 snd
snd_page_alloc 7033 2 snd_ctxfi,snd_pcm
edac_mce_amd 6785 0
led_class 2577 1 ath5k
firewire_ohci 23601 0
firewire_core 43019 1 firewire_ohci
crc_itu_t 1273 1 firewire_core
ppdev 5910 0
i2c_piix4 8680 0
ehci_hcd 35082 0
usbcore 140517 4 usbhid,ohci_hcd,ehci_hcd
i2c_core 18137 6 nvidia,nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
r8169 36214 0
mii 3738 1 r8169
parport_pc 31260 1
button 4714 1 nouveau
thermal 11834 0
evdev 8825 10
sg 25275 0
lp 8684 0
parport 29923 3 ppdev,parport_pc,lp
pcspkr 1795 0
cpufreq_ondemand 8101 0
powernow_k8 11886 0
freq_table 2331 2 cpufreq_ondemand,powernow_k8
processor 30310 1 powernow_k8
rtc_cmos 8904 0
rtc_core 14631 1 rtc_cmos
rtc_lib 1810 1 rtc_core
ext3 125021 2
jbd 46334 1 ext3
mbcache 5466 1 ext3
sr_mod 15043 0
cdrom 36354 1 sr_mod
sd_mod 26313 5
pata_acpi 3288 0
ata_generic 3111 0
ahci 34929 4
pata_atiixp 3633 0
floppy 55998 0
libata 152308 4 pata_acpi,ata_generic,ahci,pata_atiixp
scsi_mod 92676 4 sg,sr_mod,sd_mod,libata
total used free shared buffers cached
Mem: 2056776 1645468 411308 0 590048 414652
-/+ buffers/cache: 640768 1416008
Swap: 522072 5776 516296
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: :: default down [BUSY] [DONE]
success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Sa 27. Mär 02:30:56 CET 2010: performing suspend
Any other useful log files to check out?
I just put the system to sleep and woke it up again, no problem. I only notice that yesterday it took way longer than usual to go into sleep mode. Except for funky graphic patterns, all worked flawlessy now.
What could cause bus and io errors after wakeup?
Last edited by Sadface (2010-03-27 10:55:35)Yes, im using systemd. I tried also downgrading xf86-video-intel to a version from some weeks ago, with no result.
PS: no difference between systemclt suspend or pm-suspend from comand line.ùù
PS2: I tried fluxbox session and there was no flickering, so it had to be something kde-session related, and I found it: it was the image pile xscreensaver, just switching to another one solved my problem.
Thanks for your interest, wonderwoofy!
Update: nothing solved, it was just temporarly by case... same issue as before...
Last edited by steff (2012-11-09 21:04:39) -
ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION
Hello all,
i am working on OWB 10gR2 while i try to validate & Deploy according to the following process it was successful but as i tried to view data from dimension i am getting an error which i have mentioned below
Source Table = CUST_MST
Destination Table = CUSTOMER
Dimension = CUSTOMER
Mapping = CUSTOMER_MAP
Validate Table CUST_MAP.
Validate Table CUSTOMER.
Validate Dimension CUSTOMER.
Validate Mapping CUSTOMER_MAP.
Deploy table CUSTOMER.
Deploy mapping CUSTOMER_MAP.
Deploy dimension CUSTOMER (configured => Deploy All).
Deploy table CUSTOMER.
Deploy sequence <CUSTOMER_SEQ>
Deploy mapping CUSTOMER_MAP.
Deploy dimension CUSTOMER (configured => Deploy All).
Start mapping to load table CUSTOMER.
After this i am getting an error while i tried to view the data in the dimension
ERROR:- ENT-09671 ERROR WHILE EXTRACTION DIMENSION METADATA FOR DIMENSION DATAVIEWER
Thanks & Regards
Pratik Lakhpatwala
Jr Oracle DBANot sure if it's valid to have a dimension with 1 hierarchy and 1 level in that hierarchy. The hierarchy may have to have at least 2 levels. If you want the configuration of a dimension with 1 hierarchy and 1 level, CWM2 may want you to omit the hierarchy, thus creating the dimension with only 1 level.
-
I am a brand new user of Premiere Elements. I am using it for stop gap animation, bringing in digital still photos from my Nikon D3200. I just attempted to bring in the first set of photos from the SD card. I'm running Windows 7. After loading the photos, an "Add Media Failure" box came up with the message "Error: File Video Dimensions (width/height) too large". Is something wrong with the width and height of the photos and if so what do I need to do to make it work? There were 763 photos, but the message seems to refer to the height/width of each photo and not the total file size so to speak - right? During the import process, the program prompted us to bring the photos in as images and not as videos -- so that is what we selected. Thank you for any assistance.
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935 -
After switching from SUNJVM to SAP JVM on Netweaver 7.0 server
After switching from SUNJVM to SAP JVM on Netweaver 7.0 server the b2b application and the xcm configuration detail cannot be accessed
it gives the following error.
#1.5 #00059A3C7800006D0000002C000015980004B30C3E45830D#1322765072300#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##n/a##820feec01c4c11e1c79300059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error#1#/System/Server/WebRequests#Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
Exception id: [00059A3C7800006D0000002A000015980004B30C3E457F63]#
#1.5 #00059A3C7800006D0000002D000015980004B30C671A5D9B#1322765757605#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#niit.com/b2b_niit#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#0##n/a##1a892d501c4e11e1b99700059a3c7800#SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###application [b2b_niit] Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.ServletNotFoundException: Cannot load the requested servlet [b2b_niit/servlet/action].
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:330)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:354)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NoClassDefFoundError: com/sap/isa/core/ActionServlet : cannot initialize class because prior initialization attempt failed
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
at java.lang.Class.newInstance0(Class.java:310)
at java.lang.Class.newInstance(Class.java:263)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.getServlet(WebComponents.java:319)
... 14 more
Caused by: java.lang.ExceptionInInitializerError
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
at java.lang.Class.newInstance0(Class.java:310)
at java.lang.Class.newInstance(Class.java:263)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:117)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:386)
at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
... 4 more
Caused by: org.apache.commons.logging.LogConfigurationException: java.lang.reflect.InvocationTargetException
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:532)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:272)
at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:246)
at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:395)
at org.apache.struts.action.ActionServlet.<clinit>(ActionServlet.java:375)
... 13 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:282)
at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:525)
... 17 more
Caused by: java.lang.NullPointerException: while trying to invoke the method com.sap.tc.logging.Location.debugT(java.lang.String) of an object loaded from field com.sap.isa.core.logging.sla.IsaLocationSla.location of an object loaded from local variable 'this'
at com.sap.isa.core.logging.sla.IsaLocationSla.debug(IsaLocationSla.java:583)
at com.sap.isa.core.logging.sla.IsaLocationSla.<init>(IsaLocationSla.java:46)
at com.sap.isa.core.logging.IsaLocation.getInstance(IsaLocation.java:52)
at com.sap.isa.core.logging.StrutsLog.<init>(StrutsLog.java:25)
... 22 moreHi,
That particualr error should be solved by adding the following parameter to your instance profile:
jstartup/vm/parameters = -XX:-ExtendedExceptionMessages
The issue is related to note 1693118
Kind regards,
Cathal -
Some issues after switching from 686 to x86_64
Hi all,
after switching from i686 to x86_64 using this link I am now facing some minor issues with some packages. I already activated the multilib repository but some problems remain. I checked the binaries in /usr/bin for 32 bit executables as described in the above link and there are 177 "bad" binaries left. I thought all of these were not executable, but surprisingly wine was. Strange!
ffmpeg is another 32 bit executable and not runnable. So I tried to reinstall it, but that failed:
> pacman -S ffmpeg
warning: ffmpeg-1:2.6.1-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg-compat: requires libx264.so=144-32
libx264 is installed and didn't want to be reinstalled either:
> pacman -S libx264
warning: libx264-2:144.20150223-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: ffmpeg: requires libx264.so=144-32
:: ffmpeg-compat: requires libx264.so=144-32
Can someone give me a hint, what's the best way to solve this problem?
Thanks in advance, ZmannI think the first issue you will run in to is that the interface for an old P4 hdd will probably not be the same as a new computer. Besides that, it will probably be vastly slower than what comes with a new computer. I think that is not the best idea.
The only wat to really "trasition" between two archtectures that I know of is to copy configuration files over and have pacman dump a list of explicitly installed packages from the main repos. Then use that information to reinstall all those packages. -
Vlan database deleted after switch reload
Dear Team
I have an access switch (C2960S-48FPS-L) which is running on version (universalk9-mz.122-55.SE5).
This switch was running on VTP client mode and connected to distribution switch running on VTP client mode and vtp version 3, due to power failure the switch got reloaded and after reload it came to VTP server mode and all the vlans were deleted, but the SVI of the vlan and all other config was still there.
I noticesd the same behavior with other switches of model (C2960S-48FPS-L & WS-C3560X-48PF-L) running on the following IOS
1) 12.2(55)SE'X' (here X means, it could be SE3,SE4,SE5etc)
2) 12.2)58SE'X' (here X means, it could be SE3,SE4, SE5 etc)
3) 15.0(2)SE (here X means, it could be SE3,SE4, SE5 etc)
I also noticed the following error during switch reload.
"%SW_VLAN-4-BAD_VLAN_CONFIGURATION_FILE: VLAN configuration file contained incorrect verification word:[hex]."
The issue is intermittent means the same switch will not have issue sometime after reload but sometime it will have this issue.
Anybody have any idea, is this bug causing this issue or something else.
Appreciate your response.Duplicate post.
Go HERE. -
Apps stop syncing after switching to a new pc
After switching to a new pc, I have complete the "transfer all my purchases from iphone", the sync finishes without error messages, the music/books get sync'ed but my app updates etc are not syncing even with manual sync. I know I can probably solve this by completely backup+restore my iphone, but is there any other way? thx.
Try deauthorising your PC and authorise it over again, this can sometimes clear a "not authorised" problem: About iTunes Music Store Authorisation and Deauthorisation
You could also have a look at this article: iPod does not play content purchased from the iTunes Music Store
If you continue to have problems you can email Customer Services from this page, they may be able to help: iTunes Music Store - Authorization FAQ -
IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.
iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?
Contact your carrier - voicemail, and visual voicemail, is a carrier feature.
Maybe you are looking for
-
Monitor no longer sleeping after 10.8.2 & Mac Mini EFI update
Hopefully someone can help out here, my new 2012 Mac Mini was running fine without any problems, then when I installed the 10.8.2 update (not the original update that got pulled from the Apple site but the newer version) with the EFI Mac Mini firmwar
-
Can't find "ComPlusNetworkAccess-DCOM-In"
Hello, For training purposes, I'm actually trying to grant the MMC remote access from a Windows 2012 R2 Core Server with AD-DS role But I dont find the rules named "ComPlusNetworkAccess-DCOM-In" Get-NetFirewallRule ComPlusNetworkAccess-DCOM-In As res
-
Acroread full screen problem - dual display on Linux machine
Hi: I am running Linux Fedora core 15 on an HP laptop that I use for presentations. I have dual displays set up and run my presentation software (opera and acroreader) in the external monitor in full screen mode. This works fine for opera, but whe
-
Monitoring or the Task to the Project Team members in the Project Managemen
Hi Guys , I came across the new requirement of my project . My client is looking for the below functionalities. Please let me know the possibilities. 1.How do you assign a specific task to the Project Team member and how do you know its progress - 2.
-
3rd party filter missing after upgrade to Photoshop CC 2014
Upgraded my Photoshop CC to 2014.... all my presets seems to have imported fine, but none of my 3rd party filters, like Nik and Topaz are showing up in the filter menu. What happened to them??