Error at end of VBS File during DataPlugin Creation

Anytime I try to use a DataPlugin that I've created, I get an error when it reaches the end of the ReadStore subroutine. Just after it executes the End Sub of this subroutine, I get an error in a messagebox that reads:
"Cannot load the (fullpath) file with the loading mode (DataPlugin Name)!
Refer to log file."
When I go to the log file, I don't see anything, I don't understand what's going on here, here is full text of my VBS file that's being used to create the DataPlugin:
OPTION EXPLICIT
Sub ReadStore(File)
call msgbox(file.info.fullpath)
End Sub
That is word for word of what I'm trying to accomplish, I'm a complete n00b at this point. I just need to know how, what, when, where, and why this keeps happening. Thanks.

Walter-
I am using 5.6.0.8820 of the Visual Basic Scripting Edition from Microsoft. I am using DIAdem version 9.10.2036 20040319 with Windows XP 5.1.2600 Service Pack 2. I think I know why I was getting this error, Brad set me straight, if you do not create at least one implicit channel, then the script engine returns an error when the ReadStore Sub is complete. This would be helpful if this got included in the DataPlugin examples and the explanation. I'd like to know if there will be any published books on DIAdem in the near future. Please let me know, and thanks for your help.

Similar Messages

ERROR:Could not read archive file - during Processing Base System Part 2

Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!

Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b

Repeatedly the same error in the omsca.log file during 11g installation

Hi Experts,
One of my customer is getting the below error in the OMSCA.log file:
java.lang.Exception: CREATING_WEBTIER_INST_FAILED
at oracle.sysman.omsca.adapter.wls.OMSWLSAdapter.adapterConfigWebTier(OMSWLSAdapter.java:1808)
at oracle.sysman.omsca.framework.OMSGenericAdapter.configWebTier(OMSGenericAdapter.java:306)
I have checked his setup and pre-reqs,all seems to be perfectly fine.
Kindly let me some pointers related to this issue.
SR:3-4090870221
I have uploaded the log file here.
Regards
Sumani
Edited by: 893642 on Oct 28, 2011 1:13 AM

Here some screenshots, this error came back all few minutes!

Abnormal end of export file

Hi!
During an import, Oracle generates the following error:
Abnormal end of export file ...
Is any way or hint to fix the end of file ??
TIA
Angel Castro

Hi Angel
In that case passed 2 possible things:
1.- The transfer to the tape or from the tape ot disk was not in binary mode
2.- The export utility did not finish succesful the exportation when somebody was doing that activity.
Joel PÃ©rez
http://www.oracle.com/technology/experts

ORA-20100: File o0094031.tmp creation for FND_FILE failed.

wheni create a menu error like this
ORA-20100: File o0094031.tmp creation for FND_FILE failed.
Plz Help me Step by step
Thanks

Search the forum for this error; it was discussed before several times here.

Ipod freezes during sync then error that it cant read file...

A little pre-info... I have owned a black 30gb 5th gen (video) Ipod for a couple of years now. I plug it in fine, my computer recognizes it fine, Itunes works fine with it... everything works great.
I just bought another Ipod off ebay that is exact as mine except white- auction states the Ipod works fine, seller has awesome feedback, etc.. I bought this for a gift for my sister for Christmas. It is second hand, so warranty is expired.
I plug it in the computer, and first tried to transfer some normal text data via explorer. I had put this same data on my own black Ipod with no issues, words fine. The white? Lo and behold I get that "Data Cycle Redundancy" error during copy. My experience is that that has always meant that the original file is messed up, not the destination its being copied too... but in this case I know the original file(s) were/are ok.
And the Ipod freezes. So I safely unplug, and try to hard reset it. It wouldnt for a bit, and I noticed the Ipod was rather warm (but this might be because it was frozen for several minutes with the backlight still on as well). Finally I get it to reset. Same stuff happens again, again its hard to reset.
So then I decide screw it, forget adding the stuff via explorer, Ill just try to get the music on my computer at least, over via Itunes, after I first restore the Ipod.
Itunes opens... recognizes the Ipod... I go to copy music, and it copies until it essentially 'freezes'. I tried many times - its not a bad file because the same file would copy the other times Id try. It would freeze on any random file, during the write process.
Then Itunes comes up with this error:
"the ipod cannot be synced. the required file cannot be found"
I dont think this is referring to my files trying to be copied, they werent deleted or moved from their location since importing into the Itunes library. Im wondering if theres a system type file on the Ipod that Itunes speaks to as it transfers...and when the Ipod freezes... hence it cant be found...
At the same time I get this error from Itunes, I get a Windows XP bubble pop up that says:
"Delayed Write Failed - Windows was unable to save all the data for the file x. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
Now again, my computer/windows is NOT the issue. Its the Ipod.
All the advice I have searched says to fix things on my computer. That includes that Apple support page in regards to those errors - it points the finger at my USB ports, etc - and thats simply not the case. If it was, my other Ipod wouldnt be working either - nor would my flash drives.
Its the white Ipod.
I saw one site suggest to format the Ipod via Windows first, then do the Itunes restore, but the Ipod froze and Windows couldnt format.
I went into Device Manager and compared the two Ipod settings, both share the same settings. They are not set on 'enable write cache'.
I have tested the HD via Diagnostics, and the BL blinked after the test, showing the HD passed... so right now I can only think of three things... a bad logic board perhaps, or the Ipod system files are corrupt somehow no matter how many times I do the restore... should I revert to an older update; is that even possible. Or the HD is bad after all and its just being missed in the test.
So now... I need help. Am I missing something important? Is it a simple fix... a corrupt file thats freezing the Ipod somewhere - or did I get a bad Ipod from the seller.
Its so close to Christmas, if there was some simple fix(instead of it being a bad HD) I could fix it myself, Id rather do that than go through the hassle of returns/refunds. Not to mention, its always a gamble how the seller will react. Will they help, or say its not a problem on their end and try to screw me... then Ill have to go through Paypal for reimbursement and that takes 90 days at least...

I wish I had good news but all I have is information. I have access to 4 5th gen ipods. 2 black 30s and 1 white 30 and 1 black 80. The one white and one of the blacks work and have worked flawlessly for the past two years. The other black 30 and 80 started having the issue mentioned here some time after upgrading to iTunes 8. I tried to lowlevel format the iPod drive to fix any issues and that didn't cure the problem. I bought a MacBook a couple of months ago and restored my ipod to Mac format and low and behold it would accept files again! However it wouldn't let me fill the ipod beyond about halfway, this was on both ipods. Now the ipods have become slowly less and less fillable. Seems like syncing rather than putting the songs on manually seems to help, but again its getting worse all the time. (the two ipods that don't have any problems belong to my girls and the problem ones belong to my son and i) <- Grasping at straws I know, but my son and I are constantly changing the songs, playlists, videos and such.
When I bought my Mac the guys at the Apple store were shocked that I was having this problem and practically begged me to bring it in so they could see what it wrong with it. I will post an update when i do that.

Error - Premature end of file.

Hi,
I am running a scenario involviong File Sender Adapter. I am not able to get the payload.
I am getiing the following error - Premature end of file.
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_EXTD_EX_CustomerReturnData_to_C~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Premature end of file.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Has anyone encountered such kind of error?
Regards,
Neeraj

Satish,
Yes I am using content conversion.
Document Name - MT_CustomerReturnData
Document Namespace - given
Recordset Name - recordset
Recordset Structure - Header,1,Record,*
Recordset Sequence - Ascending
Key Field Name - Key
Key Field Type - String (Case-Insensitive)
Header.fieldSeparator '|'
Header.fieldNames Key,ProtocolVersion,CustomerCode,ProductionBatchNumber,Period,ProductionSite,DeliveryCode,CardType,FromBox,ToBox,DateReturnFileCreated,QuantityOfRecords,FixedString
Header.endSeparator 'nl'
Header.keyFieldValue 'H'
Record.fieldSeparator '|'
Record.fieldNames Key,CardID,PinCode,InfoCode
Record.keyFieldValue 'R'
ignoreRecordsetName true

NT 4.0, LabVIEW 6, Error 4 (END OF FILE) when trying to seek to byte offset 4096 (from start of file) when the file is larger than 2 Gig

If I try to seek (or read) with the position mode wired and set for START, I get error 4 (END OF FILE) if the file is larger than 2 GB. I'm only trying to move the file pointer 4096 bytes, not trying to seek or read more than 2GB, but I get the error if the file is over 2Gig.
Instead, I have to do reads, with the position mode unwired, until I get to the place in the file that I want to be.
Is this expected behavior?

Hello,
LabVIEW File I/O functions use an I32 value to store the size of a file. This means that we are limited to ~2GB file sizes when using the File I/O functions in LabVIEW. This explains why you are seeing odd behavior when trying to read to the end of the file, since this is causing the byte count to exceed ~2GB.
I hope this explanation sheds some light on the situation for you. Hopefully the workaround (repeated reads) is not too much of an inconvenience.
Good luck with your application, and have a pleasant day.
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Error no. 4 in SAPGUI during graphic call or file transfer.

Hi,
In the landscape there are still 46b sap version, i have some functional queries that when i executes go to the sap graphic screen and it throws with no output. I understand that that it works in ECC version but not for 46b.
This issue is related to SAPGUI, as i have the latest sapgui installed 710 that works well for ECC.
But if i input the parameter in sap 46b system , and execute to get the graphic chart i get this:
The Generation of Graphs for Stock Movements in the MC49 Transaction.
When you call a hierarchy graphic, the following error messages are displayed
1. 'Too much data in a table or too many tables defined
2. E4: error writing to XC pipe: child #1 ( id: STAT ); reclen12
3. Error no. 4 in SAPGUI during graphic call or file transfer.
I have also look in to note 316232, 361222, 96885. for this but this says to upgrade the sapgui,which is already in.
What is the solution for this.
Regards,
Chetan.

Take a look at this thread. This may provide you some guidance as it appears that Error has been encountered before.
[Link Here|Error no. 4 in SAPGUI with Graphics call or file transfer;
Regards,
Zecher

During iTunes installation "Registering iTunes automation server"... I am getting following error messag from "Microsoft visual C runtime Library"... Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe

During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1

Check the user tip below.
https://discussions.apple.com/docs/DOC-6562

Updated itunes, error message about mobile popped up during installation, then after installation, tunes will not start. gives error that a dll file is missing.

I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Analysis Services failing to Start . File system error: Error occurred during the creation of directory

Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SG

Is this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway

End of communication file error ....for xmldom

Hi,
Below is a procedure that i am executing.
I am using NOCOPY For the clob variable.
While executing the procedure for an xml value for clstring i am getting an error like
--end of communication channel.
The xml data is very big but not more that the size for clob.
procedure Prc_UpdateNodes(clString in out NOCOPY CLOB, nodename varchar2, nodeValue varchar2) is
        l_doc_node xmldom.DOMNode;
        l_xml_out varchar2(2000);
        begin
                  domDocument      := Fn_GetXmlDocument(clString);
               nodeList           := xmldom.getElementsByTagName(domDocument, nodename);
               intNoOfNode       := xmldom.getLength(nodeList);
               l_doc_node := xmldom.item(nodeList, 0);
               --xmldom.writetobuffer(l_doc_node, l_xml_out);
               PKS_DEBUG.PRC_DEBUG('CLOB IN PRC_UPDATE' || clString);
               for loopCount_int in 0.. intNoOfNode - 1 loop
                 node := XmlDom.item(nodeList, loopCount_int);
                    valueNode := XmlDom.getFirstChild(node);
                    --xmldom.writetobuffer(node, l_xml_out);
                    --This return value would be useful only in case of single record where in we could use the same after the insert operation is done
                    -- so that it could be used for the subsequent retrieval.
                    -- In case of multiple records update, this information remains of no use and doesnt have to be handled.
                    XmlDom.setNodeValue(valueNode,nodeValue);
                    --xmldom.writetobuffer(valueNode, l_xml_out);
               end loop;
               PKS_DEBUG.PRC_DEBUG('CLOB AFTER PRC_UPDATE' || clString);
               XmlDom.writeToClob(domDocument,clString);
               PKS_DEBUG.prc_debug('REMOVING BUFFER');
              PRC_REMOVE_BUFFER(clString);
               PKS_DEBUG.PRC_DEBUG('CLOB AFTER WRITITNG TO CLOB' || clString);
        end;The error occurs during the execution of the statement XmlDom.writeToClob(domDocument,clString);
Do i need the above statement as i am using NOCOPY For the CLOB variable.
Can anyone help me with this front..
Thanks.

checkout TNSPING <service name> from cmd prompt
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\NJi>tnsping issl
TNS Ping Utility for 32-bit Windows: Version 2.3.2.1.0 - Production on 25-OCT-06
14:36:06
Copyright , 1996(c) Oracle Corporation 1995. All rights reserved.
Attempting to contact (ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=198.1.2.
15)(Port=1521))
OK (100 msec)

Error when IMPORT using INDEXFILE IMP-00009: abnormal end of export file

Hi,
I met the following error while I am doing IMPORT (creating ddl using INDEXFILE option) as.
imp system/oracle@hpfw9i file='F:\C2Prop\ProdDump20051109.dmp' fromuser=FWORKSADM touser=FWORKSADM indexfile=ddlfile.sql log=st-imp.log
. . skipping table "FWDEFECTCOMPONENT_PN21"
. . skipping table "FWDEFECTCOMPONENT_PN22"
. . skipping table "FWDEFECTCOMPONENT_PN23"
. . skipping table "FWDEFECTCOMPONENT_PN24"
. . skipping table "FWDEFECTCOMPONENT_PN25"
. . skipping table "FWDEFECTCOMPONENT_PN26"
. . skipping table "FWEQPATTRIBUTE"
. . skipping table "FWEQPATTRIBUTEHISTORY"
IMP-00009: abnormal end of export file
Import terminated successfully with warnings.
Have you ever experienced the following error message when you imported the db..?
Also I could see the import was not done successfully when I compared my ddlfileold.sql which is already done using this same dump file
My actions to make ddlfile
- I have tried three times to make ddlfile but I failed all and met the same error message.
try 1 : using 9210 version
try 2 : using 9206 version
try 3 : using 9206 version at other machine.
I need your advice and help.
Thanks,
Riaz.

This means the export dump file is corrupted.
In UNIX see this command to see whether the dump file is complete
$ tail expdat.dmp
It should have EXIT in the last line.

TS3694 i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

i trying to restore my iphone at the end of the process during restoring the device shows me the 1015 code error what i have to do now?

Error -1 generally indicates a hardware failure.Your phone's broken. Buy a new phone, replace the phone through Apple or an authorised service provider, or find a 3rd party repair shop to attempt to fix it.

Error at end of VBS File during DataPlugin Creation

Similar Messages

Maybe you are looking for