Error beeps (when pressing keys)

Hi,
How does one stop the annoying error beeps occurring when an unused keyboard key - such as the 'Esc' key - is pressed in a window based Cocoa application?

I've found a solution.
For anyone wondering the same question, try placing the following method in the code of each .m file, and test if it works:
- (void) keyDown: (NSEvent*) theEvent {}
For me, it was the NSView .m file, that made it work.

Similar Messages

RAM error beep when trying to boot install disc

I'm trying to re-install OSX in order to get a clean system and upgrade the OS. However, if I try to boot from the OSX Leopard install disc, I get the three RAM error beeps. I bought new compatible RAM (2x2GB SODIMM), tried with one of the old banks, then the other, in both available slots, then the new RAM - nothing helps: Booting the system with no install disc inserted works fine, having it inserted results in the beeps. It doesn't matter if I try straight boot, pressing C, using rEFIt or going for the device's own pre-boot OS selection menu, nothing helps.
I had the screen replaced on warranty a couple weeks ago, but I do not assume that poses a problem. Can anyone help?
Thanks!

Why do you have rEFIt installed?
To be able to multi-boot OSX, Win7, and Ubuntu.
What is your machine and what OS X does it have?
Early 2011 MacBook Pro 15" non-glare screen. 4GB stock RAM.
What's on the disk 10.5 or 10.6?
The disk is Leopard, as far as I can remember. I believe I got Snow Leopard over the App store.
Have you cleaned the disk, use another?
I don't exactly have another disc ... but I tried to image them to a SD card and that gave the same results.
What are you trying to do exactly?
Completely wipe the drive (low-level) to be able to sell the device.

Malfunctioning printer call to DLBAPRP,DLL FOR DELL PRINTER A940, ERROR 126. This error occurs when pressing properties button. Is there a patch to fix this?

This error does not occur with any of my other programs employing this printer when pressing properties button. The complete error message I get is as follows:
'''DELL PRINTER A940 PROPERTIES'''
Function address 0x0 caused a protection fault (exception code 0xc0000005). The application property sheet page(s) may not function properly.
|OK|

Perform the suggestions mentioned in the following articles:
* [[Firefox prints incorrectly#w_reset-firefox-printer-setting|Reset Firefox Printer Setting]]
* http://kb.mozillazine.org/Problems_printing_web_pages
Check and tell if its working.

Touchpad freezes when pressing key g500

trying to play a game and only noticed it now. bought it a month ago. thats cuzi didnt need to press keys and move mouse at same time. ELAN touchpad, palm check at minimum settings.

Hi there,
did you download the latest ELAN trackpad driver from http://support.lenovo.com/en_US/downloads/default.page
The one on the CD is old.
However, this new trackpad driver has problems of its own, although at least it won't freeze on you.
Cheers,
shauni

Getting Error 500 when pressing the backbutton of the browser after log out

I am working on a web project , and am using AJAX in my application. I need to get list of templates and events stored in the database when my page is being loaded so im using AJAX. the problem is, when i press the logout in my page and after logging out if i press the browsers back button then im getting the Http Error 500.
Regarding this issue i previously also posted but i havent get solved my problem. (may be i havent posted my source code , rather i just posted error message.).
Here is the error message of the browser,
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
java.lang.NullPointerException
     com.koffee.eon.subscriber.action.TemplateNames.doPost(TemplateNames.java:66)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.struts2.dispatcher.FilterDispatcher.doFilter(FilterDispatcher.java:416)
Here is my source code of the TemplateNames class,
package com.koffee.eon.subscriber.action;
import com.koffee.eon.subscriber.persistence.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.http.HttpServlet;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
import java.text.SimpleDateFormat;
import java.util.*;
public class TemplateNames extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
     throws ServletException, IOException {
     response.setContentType("text/html");
     PrintWriter out = response.getWriter();
     String html="",html1="";
     HttpSession session=request.getSession();
     UserCompleteDetails sessionDetails=(UserCompleteDetails)session.getAttribute("userdetails");
     System.out.println("checking session after logout"+sessionDetails);
     if(sessionDetails==null)
     System.out.println("session details in if condition is:"+sessionDetails);
     response.sendRedirect("/login.jsp");
     System.out.println("after checking "+sessionDetails);
     String type=null;
     type=request.getParameter("type");
String subscriberUserEONId=sessionDetails.getUserEonId();
System.out.println("subscriberUserEONId from session is: "+subscriberUserEONId);
     SimpleDateFormat sdfDate=new SimpleDateFormat("yyyy-MM-dd");
     SimpleDateFormat sdfTime=new SimpleDateFormat("HH:mm:ss");
     TemplateManagement dbObj=new TemplateManagement();
EventManager dbObj1=new EventManager(); // for events
     List templateNames=dbObj.getTemplates(subscriberUserEONId);
     List eventIds=dbObj1.getEventsCompleteList(subscriberUserEONId); // for events
     System.out.println("size of list of templates is:" + templateNames.size());
     System.out.println("size of list of events is: "+eventIds.size()); // for events
     if(type==null)
     html+="<table><tr><td>Select Your Invitation Card: ";
     html+="<select name=\"templateName\" class=\"cell\" onchange=getImage(this.value) onblur=checkTemplate() tabindex=\"1\">";
     html+= "<option value=\"0\">Select</option>";
     HashMap hmap=new HashMap();
     try {
     for(int i=0;i<templateNames.size();i++) {
     TemplateMaster bean=(TemplateMaster)templateNames.get(i);
     Integer templateid=bean.getTemplateId();
     String templatepath=bean.getTemplateRelevantpath();
     hmap.put(templateid,templatepath);
     System.out.println("path recevied from db for template is: "+templatepath);
System.out.println("template id received from db is : "+templateid);
     html+= "<option value=\"" + templateid + "\">" + templateid + "</option>";
     } catch(Exception ee) {ee.printStackTrace();}
     session.setAttribute("hmap", hmap);
     html+="</select></td></tr><tr><td>";
     System.out.println("path new is : "+html);
     html+="</td>";
     System.out.println(html);
html+="</td></tr><tr><td>Select an Event: ";
          html+="<select name=\"eventId\" class=\"cell\">";
          try {
     for(int j=0;j<eventIds.size();j++) {
     EventMaster bean=(EventMaster)eventIds.get(j);
     String eventName=bean.getEventName();
     Integer eventId1=bean.getEventId();
     String eventStartDate=sdfDate.format(bean.getEventStartdate());
     String eventStartTime=sdfTime.format(bean.getEventStarttime());
     String eventId=eventName+" on "+eventStartDate+" at "+eventStartTime;
     System.out.println("event id from database is : "+eventId1);
     System.out.println("event list from database is : "+eventId);
     html+= "<option value=\"" + eventId1 + "\">" + eventId + "</option>";
     } catch(Exception eee) {eee.printStackTrace();}
     html+="</select></td></tr></table>";
     System.out.println(html);
     out.println(html);
     out.flush();
     out.close();
     if(type!=null)
     html1+="</td></tr><tr><td>Select an Event: ";
     html1+="<select name=\"eventId\" class=\"cell\">";
     try {
     for(int j=0;j<eventIds.size();j++) {
     EventMaster bean=(EventMaster)eventIds.get(j);
     Integer eventId1=bean.getEventId();
String eventId2=eventId1.toString();
     String eventName=bean.getEventName();
     String eventStartDate=sdfDate.format(bean.getEventStartdate());
     String eventStartTime=sdfTime.format(bean.getEventStarttime());
     String eventId=eventName+" on "+eventStartDate+" at "+eventStartTime;
     System.out.println(eventId);
     html1+= "<option value=\""
+ eventId2 + "\">" + eventId + "</option>";
     } catch(Exception eee) {eee.printStackTrace();}
     html1+="</select></td></tr></table>";
     out.println(html1);
     out.flush();
     out.close();
}

chinni wrote:
java.lang.NullPointerException
     com.koffee.eon.subscriber.action.TemplateNames.doPost(TemplateNames.java:66)Do you understand when a NPE will be thrown? Some object reference at line 66 of TemplateNames.java is null while you didn't expect and you still invoke/access it. To fix this, add a nullcheck or just instantiate the reference.

Since I installed on my Mac os10.6 to the latest version of Firefox I am getting error beeps when I try to type. It won't let me re-type or delete anything

I can type but if I make a mistake and want to retype or delete what I've typed it just beeps at me and won't allow me to type. I can use the cut and paste feature to fix things but what a complete hassle. How do I fix this annoying problem?

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When pressing soft key continuously error will occured

In midp1.0 when pressing soft key continuously during the time of program execution in doesn't
affect thread value.But the same program in midp 2.0 thread value will affected and error will
occured.is there any difference between midp 1.0 and midp 2.0 when pressing key press?

Please use CLDC and MIDP forum for midp related issues.
http://forum.java.sun.com/forum.jspa?forumID=76

In IPhone Apps crash when press back buton . When press back back button Last class is appeared slightly slighly ash, with no error or warning .

Hi,
I am developing apps on for 4.1 and on Xcode3.2. My Apps crash when press back buton . When press back back button Last class is appeared slightly than crash, with no error or warning ....Here are the code....crash on Back Funtion
#import "TransactionSummaryDetailViewController.h"
#import "TransactionSummaryData.h"
#import "Constant.h"
#import "DataBase.h";
#import "Common.h"
#import "YPCardHolderServiceService.h"
#import "SelectionScreenViewController.h"
@implementation TransactionSummaryDetailViewController
@synthesize table,cardReference;
@synthesize waitIndicator,transactionsummary,keyArray,valueArray,isSummaryAvailable;
@synthesize startDate,endDate;
// The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad.
- (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil {
    if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) {
        // Custom initialization
    return self;
-(void)getrowcount{
    if(transactionsummary.cardholdernmae !=nil){
        [keyArray addObject:@"Card Holder Name: "];
        [valueArray addObject:transactionsummary.cardholdernmae];
    if(transactionsummary.cardnumber!=nil){
        [keyArray addObject:@"Card Number: "];
        [valueArray addObject:transactionsummary.cardnumber];
    if(transactionsummary.debittransactioncount != nil){
        [keyArray addObject:@"Debit Tx. Count: "];
        [valueArray addObject:transactionsummary.debittransactioncount];
    if(transactionsummary.debittransactionvalue!=nil){
        [keyArray addObject:@"Debit Tx. Value"];
        [valueArray addObject:transactionsummary.debittransactionvalue];
    if(transactionsummary.credittransactioncount!=nil){
        [keyArray addObject:@"Credit Tx. Count: "];
        [valueArray addObject:transactionsummary.credittransactioncount];
    if(transactionsummary.credittransactionvalue!=nil){
        [keyArray addObject:@"Credit Tx. Value: "];
        [valueArray addObject:transactionsummary.credittransactionvalue];
// Implement viewDidLoad to do additional setup after loading the view, typically from a nib.
- (void)viewDidLoad {
    appDelegate = [[UIApplication sharedApplication]delegate];
    keyArray = [[NSMutableArray alloc]init];
    valueArray = [[NSMutableArray alloc]init];
    [self getrowcount];
    NSLog(@"Key Array Count is %d",[keyArray count]);
    [table setBackgroundColor:[UIColor clearColor]];
    [table setSeparatorColor:TableViewCellSeperatorColor];
    [waitIndicator setHidden:YES];
    [self setTitle:@"Summary Details"];
    UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom];
    [button setImage:[UIImage imageNamed:@"list.png"] forState:UIControlStateNormal];
    [button addTarget:self action:@selector(BacktoView) forControlEvents:UIControlEventTouchUpInside];
    [button setFrame:CGRectMake(0, 0, 76, 44)];
    self.navigationItem.leftBarButtonItem = [[UIBarButtonItem alloc] initWithCustomView:button];
    if(!isSummaryAvailable)
        if([Common isNetworkAvailable])
            [waitIndicator startAnimating];
            YPCardHolderServiceService *services = [[YPCardHolderServiceService alloc] init];
            YPTransactionsSummaryRequest *summaryRequest = [[YPTransactionsSummaryRequest alloc] init];
            summaryRequest.SC = appDelegate.SC;
            summaryRequest.userName = appDelegate.userName;
            summaryRequest.valid =TRUE;
            summaryRequest.cardReference =[NSString stringWithFormat:@"%@",cardReference];
            NSLog(@"Start Date Is %@ and End Date is %@",startDate,endDate);
            summaryRequest.startDate = startDate;
            summaryRequest.endDate = endDate;
            summaryRequest.applicationType = @"M";
            [services getTransactionsSummary:self action:@selector(getTransactionsSummaryHandlers:) transactionsSummaryRequest:summaryRequest];
            [summaryRequest release];
            [services release];
    [super viewDidLoad];
//Handle the Response of getTransactionsSummary
-(void)getTransactionsSummaryHandlers:(id) value
    [waitIndicator stopAnimating];
    // Handle errors
    if([value isKindOfClass:[NSError class]]) {
        NSLog(@"%@", value);
        return;
    // Handle faults
    if([value isKindOfClass:[SoapFault class]]) {
        NSLog(@"%@", value);
        return;
    // Do something with the YPLoginResponse* result
    YPTransactionsSummaryResponse* result = (YPTransactionsSummaryResponse*)value;
    if(result.statusCode == 0)
        NSLog(@"Number of Transaction is =%d",[result.transactionSummaryList count]);
        NSLog(@"Step 1 ='%@'",appDelegate.userID);
        NSString *deleteQuery = @"delete from TransactionSummary where userid = ";
        NSLog(@"Step 1 ='%@'",appDelegate.userID);
        deleteQuery = [deleteQuery stringByAppendingString:[NSString stringWithFormat:@"%@ and cardreference = '%@'",appDelegate.userID,cardReference]];
        NSLog(@"delete query= '%@'",deleteQuery);
        [DataBase deleteDataFromTable:deleteQuery];
        NSLog(@"delete query= '%@'",deleteQuery);
        //for (int i =0; i< [result.transactionSummaryList count]; i++)
        for (int i =0; i< [result.transactionSummaryList count] -2; i++)
            NSLog(@"for loop= %d",i);
            YPTransactionSummaryDetails *transactionSummary = (YPTransactionSummaryDetails*)[result.transactionSummaryList objectAtIndex:i];
            NSLog(@"cardholdername= '%@'",transactionSummary.cardholderName);
            /*NSString *insertQuery = @"Insert into TransactionSummary(cardholdername,cardnumber,debittransactioncount,debittransac tionvalue,credittransactioncount,credittransactionvalue,userid) values(";
            insertQuery =[insertQuery stringByAppendingString:[NSString stringWithFormat:@"'%@','xxxx xxxx xxxx %@',%d,%d,%d,%d,'%@',%@)",
                                                               transactionSummary.cardholderName,transactionSummary.cardNumber,transactionSumm ary.debitTransactionCount,
                                                               transactionSummary.debitTransactionValue,transactionSummary.creditTransactionCo unt,transactionSummary.creditTransactionValue,
                                                               appDelegate.userID]];*/
            //Add by sarvesh
            NSString *insertQuery = @"Insert into TransactionSummary(cardholdername,cardnumber,debittransactioncount,debittransac tionvalue,credittransactioncount,credittransactionvalue,cardreference,userid) values(";
            insertQuery =[insertQuery stringByAppendingString:[NSString stringWithFormat:@"'%@','%@',%d,%d,%d,%d,'%@',%@)",
                                                               transactionSummary.cardholderName,transactionSummary.cardNumber,transactionSumm ary.debitTransactionCount,
                                                               transactionSummary.debitTransactionValue,transactionSummary.creditTransactionCo unt,transactionSummary.creditTransactionValue,cardReference,
                                                               appDelegate.userID]];
            NSLog(@"Insert Query for Transaction Summary is %@",insertQuery);
            [DataBase InsertIntoTable:insertQuery];
        //Read Update Data From DataBase and Refresh Table
            NSString *query = @"Select * from TransactionSummary where userid = ";
            query = [query stringByAppendingString:[NSString stringWithFormat:@"%@ and cardreference = '%@'",appDelegate.userID,cardReference]];
        NSLog(@"select query= %@",query);
            NSMutableArray *temp=[DataBase getTransactionSummaryTableData:query];
            if([temp count] > 0)
                transactionsummary = (TransactionSummaryData*)[temp objectAtIndex:0];
                [keyArray removeAllObjects];
                [valueArray removeAllObjects];
            [self getrowcount];
            [table reloadData];
-(void)viewDidAppear:(BOOL)animated
    CGFloat navBarHeight = 50.0f;
    CGRect frame = CGRectMake(0.0f, 20.0f, 320.0f, navBarHeight);
    [self.navigationController.navigationBar setFrame:frame];
    [super viewDidAppear:animated];
-(IBAction)BacktoView
    NSLog(@"in back function..TrasactionSummaryDetail");
    SelectionScreenViewController *screenView=[[SelectionScreenViewController alloc] initWithNibName:@"SelectionScreenViewController" bundle:nil];
    [self.navigationController popViewControllerAnimated:YES];
    [screenView release];
- (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath{
    return UITableViewCellEditingStyleNone;
- (NSInteger)numberOfSectionsInTableView:(UITableView *)tableView{
    return 1;
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath
    return cellHeightForGroupedTable;
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section{
    if(section == 0)
        return [keyArray count];
    else
        return 0;
- (NSString *)tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section{
    NSString *title = nil;
    switch (section){
        case 0:{
            //title = @"Summary Details";
            break;
    return title;
- (CGFloat)tableView:(UITableView *)tableView heightForHeaderInSection:(NSInteger)section {
    if ([self tableView:tableView titleForHeaderInSection:section] != nil) {
        return tableHeaderHeight;
    else {
        // If no section header title, no section header needed
        return 0;
- (UIView *)tableView:(UITableView *)tableView viewForHeaderInSection:(NSInteger)section {
    NSString *sectionTitle = [self tableView:tableView titleForHeaderInSection:section];
    if (sectionTitle == nil) {
        return nil;
    // Create label with section title
    UILabel *label = [[[UILabel alloc] init] autorelease];
    label.frame = CGRectMake(20, 6, 300, 30);
    label.backgroundColor = [UIColor clearColor];
    label.textColor = HeaderTextColor;
    label.shadowColor = HeaderTextShadowColor;
    label.shadowOffset = CGSizeMake(0.0, 1.0);
    label.font = HeaderTextFontSize;
    label.text = sectionTitle;
    // Create header view and add label as a subview
    UIView *view = [[UIView alloc] initWithFrame:CGRectMake(0, 0, 320,60)];
    [view autorelease];
    [view addSubview:label];
    return view;
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath{
    UITableViewCell *cell = nil;
    NSString *cellIdentifier;
    cellIdentifier = @"SectionsTableIdentifier";
    int row = [indexPath row];
    CGRect nameLabelRect = CGRectMake(19 , 8, 240, 29);
    CGRect cardlabelRect = CGRectMake(19,31,240,15);
    UILabel *nameLabel = [[UILabel alloc] initWithFrame:nameLabelRect];
    UILabel *cardnumber = [[UILabel alloc] initWithFrame:cardlabelRect];
    cell = [tableView dequeueReusableCellWithIdentifier:cellIdentifier];
    if(cell == nil){
        cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:cellIdentifier] autorelease];
    // Remove all subview from cell content view
    for (UIView *view in cell.contentView.subviews){
        [view removeFromSuperview];
     [cell setAccessoryType:UITableViewCellAccessoryNone];
    [nameLabel setTextColor:firstLabelFontColor];
    [nameLabel setFont:firstLabelFont];
    [nameLabel setFont:firstLabelFontSize];
     nameLabel.textAlignment = UITextAlignmentLeft;
     nameLabel.text = [NSString stringWithFormat:@"%@ : %@",[keyArray objectAtIndex:row],[valueArray objectAtIndex:row]];
     [cell.contentView addSubview: nameLabel];
     cell.selectionStyle = UITableViewCellSelectionStyleNone;
    [cell setBackgroundColor:[UIColor clearColor]];
    [cell setBackgroundColor:TableViewCellColor];
    [nameLabel setBackgroundColor:[UIColor clearColor]];
    [cardnumber setBackgroundColor:[UIColor clearColor]];
    [cardnumber release];
    [nameLabel release];
    return cell;
// Override to allow orientations other than the default portrait orientation.
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceO rientation {
    // Return YES for supported orientations
    return (interfaceOrientation == UIInterfaceOrientationPortrait);
- (void)didReceiveMemoryWarning {
    // Releases the view if it doesn't have a superview.
    [super didReceiveMemoryWarning];
    // Release any cached data, images, etc that aren't in use.
- (void)viewDidUnload {
    // Release any retained subviews of the main view.
    // e.g. self.myOutlet = nil;
- (void)dealloc {
    [table release];
    [waitIndicator release];
    [keyArray release];
    [valueArray release];
    [transactionsummary release];
    [super dealloc];
@end

This is the user-to-user tech support site. For carrier issues go to the Dev forums.
You might want to note that the current iOS is 4.3.3, and the current SDK is 4.3 and XCode 4.0.2

When pressing the "R" on the keyboard to record the following pop up - "Beta-only warning message-not to be localized Can't create record files please report" and then this "error occurred Result= -48" What does this mean?

When pressing the "R" key on the keyboard to record the following pops up - "Beta-only warning message-not to be localized. Can't create record file, Please Report" I press O.K. and this pops up - "Error occurred Result= -48". Can't figure out why. First time I have every had problems> What's up with this?

a -48 error is a duplicate filename.
the first things i'd try are the oddball problems fixes:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Winxp is gone when pressing option key at startup, "no bootable device"

Hi everyone,
I'm new to mac and recently bought a MBP.
I did bootcamp and installed windows xp and SP3 at the same time in a small partition, I remember it was 8gb.
I had no problem booting in to xp or mac after the installation, I can even press option and see both OS.
But now I cannot boot to windows, at startup while pressing the option key, I only see mac os and not windows. I also tried rebooting from the startup disk utility, but it has a black screen saying "no bootable disk found." It wants me to insert a bootable disk, so I inserted the window xp disk and has to force restart the laptop. Then it started a process like trying to load the files to reinstall win xp, of course I didn't let it.
Now when I went back to disk utilities I see that the winxp partition is 9.2gb, it was 8gb when I made it.
Recently I split my mac partition into 2, I tried to do the time machine back up, but then it takes too long so I canceled it and deleted the partition. I wonder if this affects my window xp partition.
Now I cannot see winxp when pressing option key at startup, but can see it in startup disk utility, and disk utility. When I boot from startup disk utility, it shows "no bootable device, insert cd, and press anykey..." I tried verifying and repairing the parition in disk utility, didn't work.
So this is all I did before I cannot boot into xp.
1. made new partition for winxp (formated partition as FAT)in bootcamp and installed winxp + sp3. everything was fine.
2. create another partition, and call it "data" <-want to create this for data only, while the other half is for software installation only.
3. create another partition for time machine, but when running time machine it says the partition is too small, so I delete it and make the partition bigger.then I run time machine, but since it takes way too long, I canceled it, and deleted the partition.
4. in winxp, had installed kapersky anti-virus 9.0
Now, I have 3 partitions: 1 for software installation, 1 for data, and 1 for winxp.
So why can't I boot to windows? Did things overwrite? Please help me, I'm so frustrated. Thank you.
Message was edited by: nobutan
Message was edited by: nobutan

Thanks fortuny,
I had read the link you suggested. And since my partition for windows is FAT32, as noted in the website, I can edit the boot.ini directly in my mac. In my mac, it already shows that the partition # is 3,
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN/fastdect
but my window os is not booting.
Like the link noted, "it crashes with the "I'm sorry, we couldn't start up Windows. Do you want to start in Safe Mode?" screen. You'll also see a flicker of the BLUE SCREEN OF DEATH, which flashes an UNMOUNTABLEBOOTVOLUME error so quickly you won't have a chance to read it. This was the hint that the BOOT.INI entries were incorrect..."
According to the boot.ini in the site, my boot.ini file was already set up correctly, so why can't windows startup?
Also something I don't understand from this:
"NOTES: If you didn't follow the instructions and chose to PARTITION the existing volume instead of RESIZING then ADDING a partition, this appears to mess up BootCamp's boot loader and you may have to start again. Step 3, however, may offer you a way out."
When I did the 3rd partition, I did it in Disk Utility in mac, not from the mac os cd, and I split the mac partition into 2, I didn't do the "resizing," then using the unused space to make new partition... I wonder if this is causing the normal booting...
So do I start again by deleting my data partition or start from reinstalling windows? If the problem can be fixed without installing windows, of course, it would be great.
Message was edited by: nobutan

I get error message when trying to add key tags

I get error message when trying to add key tags

You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

Getting error message when passing data into table: Primary Key

Getting an error in a process that is feeding the invoice creation in SAP, violation of PRIMARY KEY constraint 'INV1_Primary', cannot insert duplicate key in object 'INV1'. I assume this is due to duplicate key values being passed into the table INV1, however I get this error even when I am passing unique record combinations of the key fields docentry and linenum. This is on 2005A SP01.
Thanks

Hi Peter,
Could you provide a code sample of the routine that is causing the error please?
It sounds like a data corruption issue (though it could possibly be a bug in the DI API). I recommend you speak to SAP support. There is a utility that can validate the document numbering but you'll need to speak to SAP support before you run this as it can have other negative effects, depending on the state of your data. They may ask for a copy of your database to test.
Kind Regards,
Owen

Screen exit Payment document saved when press enter after error message

Hi All,
I have created a screen enhancement for payment document WZR1.its in additional data tab under header details.
Here i should populate a error message when user save the payment document without entering values to custom screen fields.It works fine with Function exit LWZRE017 . It populated the msg and the screen is disabled but after when i press enter button the document is saved and created.
please let me know how to stop saving the document without entering values in custom fields.
Thanks,
Arun kumaran.
Edited by: Arun Kumaran on Mar 4, 2010 12:09 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:26 PM
Edited by: Arun Kumaran on Mar 4, 2010 3:43 PM

I found the fcode when enter is 'ENT1' it is from standard screen program.
I populated the same message when UCOMM = 'ENT1' still not working.
ARUN KUMARAN.
Edited by: Arun Kumaran on Mar 5, 2010 1:36 PM
Edited by: Arun Kumaran on Mar 5, 2010 2:11 PM

Thinkpad keyboard problem - some keys generate multiple keys when pressed

thinkpad keyboard problem - some keys generate multiple keys when pressed
For example, "t" generates "tr", "y" generates "yu", "backspace" generates "backspace" plus "IBM access connections", "m" generates "mn" and "n" generates "mn". Not all keys are wrong.
For what it's worth, the odd behaviour started shortly after a trip to Miami in which I had a meeting at a cafe in which we were undercover but it was pouring cats and dogs - it was like having a meeting in a sauna - so I am wondering if the high humidity could have caused the behaviour.
I tried replacing the keyboard but the new keyboard has the same problem.
The machine in question is a Thinkpad T23 running Windows XP Pro
Any help would be appreciated as I am now in Los Angeles using a borrowed Mac! :-)

i have something along the lines of the same problem.
http://bbs.archlinux.org/viewtopic.php?id=56777
my conclusion is something in the last system update screwed it up.

TS1702 Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues?

Cannot get iPhone 4 to talk with Mac Lion using Numpad. Have updated, restarted etc. Have Screen Sharing on. It sees my computer but when I press keys on the NumPad there is no response. I have tried it on the Calculator and on Sibelius. Any clues??

Here's how to do it.
1. App Store, iTunes Store should have the same AppleID on Computer and iPhones. (Free to share apps, music and books... )
2. Person A uses the same purchasing account for everything (ie. email, contacts and ...).
3. Person B have the same purchase account see no. 1 (for App Store and iTunes Store) but create a second AppleID for iCal, e-mail, contacts and etc.

Error beeps (when pressing keys)

Similar Messages

Maybe you are looking for