Error: /BIC/ZPROP_REM cannot be convertedin type DEC

Hi All,
I am loading data from a flatfile, I am able to see Data coming in preview, but when I schedule its shooting an error message,
Record 1:ContentsProperties Remedi from field /BIC/ZPROP_REM cannot be convertedin type DEC ->longtext
Message no. RSAR198
Diagnosis
The value 'Properties Remedi' from field /BIC/ZPROP_REM cannot be converted into the DDIC data type DEC of the InfoObject in data record 1. The field contentcould not be transferred into the communication structure format.
System response
The data to be loaded has a data error or field /BIC/ZPROP_REM of the transfer structure is mapped to an unsuitable InfoObject.
The conversion of the transfer structure into the communication structure was cancelled. The processing of data records with errors was continued with respect to the settings in the error handling of the InfoPackage (Tab Page: Update Parameters).
Not able to find the solution..
Please help in resolving this,
Thanks in Advance,
Sai

Hi Kapadia,
thanks for ur immedaite reply,
As I am loading flatfile, the transfer rule assignment will be generated automatically when we aiisgn datas source,
moreover its a keyfigure which is in DEC format..
please explain me where I am going wrong..
Thanks,
Sai

Similar Messages

Re:Contents L001 from field /BIC/NTrtc cannot be converted in type QUAN

Hi ,
When loading from Flat file I am getting the following error in the developement.
Message no. RSAR198
Diagnosis
The value 'L001' from field /BIC/NTrtc cannot be converted into the DDIC data type QUAN of the InfoObject in data record 1. The field content could not be transferred into the communication structure format.
System response
The data to be loaded has a data error or field /BIC/NTrtc of the transfer structure is mapped to an unsuitable InfoObject.
The conversion of the transfer structure into the communication structure was cancelled. The processing of data records with errors was continued with respect to the settings in the error handling of the InfoPackage (Tab Page: Update Parameters).
Please suggest some the resolution.
Thanks and Regards,
Ravi.
Assigning points is the way to say thanks in SDN.
Edited by: Ravi Bw on Dec 21, 2007 1:45 PM
Edited by: Ravi Bw on Dec 21, 2007 1:53 PM
Edited by: Ravi Bw on Dec 21, 2007 2:41 PM

can you please answer some one this is very imporant for me..
Siri

Cannot be converted in type DEC,CURR - longtext

Dear,
When we are loading the data to the targets, we are getting the errors in the Transfer rules like mentioned bellow
Info source 0EC_CS_1 (Transaction Data for Consolidation)
Status (tab) :
Technical : Collection in source system ended
Processing Step : Processing End
Details (tab):
Processing end : Errors occurred
Error records written to application log
Error in an arithmetic operation in record 1
Record 1 :Contents 00 0.0000000 from field PCNT1 cannot be converted in type DEC ->longtext
Info source 0CO_OM_CCA_9 (Cost Centers: Actual Costs with Delta E)
Record 39952:Contents 048624.95- 1 from field SWF cannot be converted in type CURR ->longtext
Kindly help.
Thanks & Regards,
Kiran A
Edited by: Kiran A on Mar 21, 2010 10:23 AM
Edited by: Kiran A on Mar 21, 2010 11:36 AM

Hi,
It is sure some where in transferrules the mapping wasdone wrongly , like char --char of info object but in ur case some where data element is not same for field and info object.
check throughly transfer rules correctly field level and infoobject mapping and activate.
it is some where currency and unit fields the difference is there for data elements
Thanks&Regards,
Sathish
Edited by: sathish kakumudi on Mar 21, 2010 4:01 PM

I get error message DB745 with EDIT ALV on a field type DEC?

Hi,
I have an ALV which has a field type DEC.
The ALV is open for edit.
Once I put negative number in, I get the error message DB745.
This error is retrieved from SAP code and I do not see any reason why.
I checked the field cat and it looks fine (ref to a field type DEC).
I am using lcl_grid_event_receiver with method: handle_data_changed FOR
EVENT data_changed OF cl_gui_alv_grid.
In that method I get the error in er_data_changed->mt_protocol.
There is no problem to show negative data if it is saved in the database
as negative.
Can anyone throw ideas how to fix that?
Thanks,
Itay

If you simply check the domain WERT7, you'll see that the checkbox for "Sign" is not checked. Therefore negative numbers are not allowed.
Just because a field is decimal or currency does not mean that negatives are allowed.
Many times, the sign is handled by a separate debit/credit indicator field such as a field with a domain of SHKZG.
Rob
Message was edited by:
Rob Burbank

Cannot convert ÿØÿà of type class java.lang.String to class BFileDomain.

Hi All,
I am using Jdeveloper 11.1.2.3.0.
I have a scenario of making an ADF page where I have a IMAGE field to show on the page. So,I have a table called "PRODUCT" with fields called photo with BFILE type. Now when I the data i have inserted using the DML command and i can see the path at the backend.
However,when i am runnig my ADF page in the Filed called "PHOTO" I can only see a junk character stating 'yoyo'.
When I click on it, it says ERROR "Cannot convert ÿØÿà of type class java.lang.String to class oracle.jbo.domain.BFileDomain".
Your help will be appreciated ASAP.
Regards,
Shahnawaz

Hi,
did you show the id-value in the user interface as a input-component, and did the input-component include a converter?
If yes, show the id as output-text and remove any existing converter-components.
Best Regards

"Error:The search cannot be executed because the table has pending changes that would be lost", after DELETE

Good day,
On Search Page, I have searched for the record(s) then deleted a record and got confirmation message i.e. Record has deleted. Next when I search for any record I'm getting below error.
Error
The search cannot be executed because the table has pending changes that would be lost.
Could you please help me to fix this issue. Your response is highly appreciated.
Item properties:
Item Style : Image
Action Type: Fire Action
Event : delete
Below is the code using in CO and AM
Controller (processFormRequest):
if ("delete".equals(pageContext.getParameter(EVENT_PARAM)))
 // The user has clicked a "Delete" icon so we want to display a "Warning"
 // dialog asking if she really wants to delete the employee. Note that we
 // configure the dialog so that pressing the "Yes" button submits to
 // this page so we can handle the action in this processFormRequest( ) method.
 String visit_id = pageContext.getParameter("visit_id");
 String employeeName = pageContext.getParameter("last_name") + ", " + pageContext.getParameter("first_name");
 MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName)};
 OAException mainMessage = new OAException("FND", "XXXX_EMP_DELETE_WARN", tokens);
 // Note that even though we're going to make our Yes/No buttons submit a
 // form, we still need some non-null value in the constructor's Yes/No
 // URL parameters for the buttons to render, so we just pass empty
 // Strings for this.
 OADialogPage dialogPage = new OADialogPage(OAException.WARNING,
 mainMessage, null, "", "");
 // Always use Message Dictionary for any Strings you want to display.
 String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
 String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
 // We set this value so the code that handles this button press is
 // descriptive.
dialogPage.setOkButtonItemName("DeleteYesButton");
 // The following configures the Yes/No buttons to be submit buttons,
 // and makes sure that we handle the form submit in the originating
 // page (the "Employee" summary) so we can handle the "Yes"
 // button selection in this controller.
dialogPage.setOkButtonToPost(true);
dialogPage.setNoButtonToPost(true);
dialogPage.setPostToCallingPage(true);
 // Now set our Yes/No labels instead of the default OK/Cancel.
dialogPage.setOkButtonLabel(yes);
dialogPage.setNoButtonLabel(no);
 // We need to keep hold of the employeeNumber and employeeName.
 // The OADialogPage gives us a convenient means
 // of doing this. Note that the use of the Hashtable is
 // most appropriate for passing multiple parameters. See the OADialogPage
 // javadoc for an alternative when dealing with a single parameter.
 java.util.Hashtable formParams = new java.util.Hashtable(1);
formParams.put("visit_id", visit_id);
formParams.put("empName", employeeName);
dialogPage.setFormParameters(formParams);
 pageContext.redirectToDialogPage(dialogPage);
 else if (pageContext.getParameter("DeleteYesButton") != null)
 // User has confirmed that she wants to delete this employee.
 // Invoke a method on the AM to set the current row in the VO and
 // call remove() on this row.
 String employeeNumber = pageContext.getParameter("visit_id");
 String employeeName = pageContext.getParameter("empName");
 Serializable[] parameters = { employeeNumber };
 // OAApplicationModule am = pageContext.getApplicationModule(webBean);
am.invokeMethod("deleteEmployee", parameters);
 // Now, redisplay the page with a confirmation message at the top. Note
 // that the deleteEmployee() method in the AM commits, and our code
 // won't get this far if any exceptions are thrown.
 MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName) };
 OAException message = new OAException("FND",
 "XXXX_EMP_DELETE_CONFIRM", tokens, OAException.CONFIRMATION, null);
pageContext.putDialogMessage(message);
Application Module:
public void deleteEmployee(String visit_id)
 // First, we need to find the selected employee in our VO.
 // When we find it, we call remove( ) on the row which in turn
 // calls remove on the associated EmployeeEOImpl object.
 int empToDelete = Integer.parseInt(visit_id);
 OAViewObject vo = (OAViewObject)getNonEmployeesSummaryVO1();
 NonEmployeesSummaryVORowImpl row = null;
 // This tells us the number of rows that have been fetched in the
 // row set, and will not pull additional rows in like some of the
 // other "get count" methods.
 int fetchedRowCount = vo.getFetchedRowCount();
 // We use a separate iterator -- even though we could step through the
 // rows without it -- because we don't want to affect row currency.
 RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
 deleteIter.setRangeStart(0);
 deleteIter.setRangeSize(fetchedRowCount);
 for (int i = 0; i < fetchedRowCount; i++)
 row = (NonEmployeesSummaryVORowImpl)deleteIter.getRowAtRangeIndex(i);
 // For performance reasons, we generate ViewRowImpls for all
 // View Objects. When we need to obtain an attribute value,
 // we use the named accessors instead of a generic String lookup.
 // Number primaryKey = (Number)row.getAttribute("EmployeeId");
 Number primaryKey = row.getVisitId();
 if (primaryKey.compareTo(empToDelete) == 0)
 // This performs the actual delete.
 row.remove();
 getTransaction().commit();
 break; // only one possible selected row in this case
 // Always close the iterator when you're done.
 deleteIter.closeRowSetIterator();
 } // end deleteEmployee
Thanks,
Ravi

Hi
Check this link Getting error in search page search cannot be executed
Regards,
Dilip

In 6.0 get error "END_OF_RECORD" must be a character-type data object .....

Hi All,
following piece of code was working fine in 4.6 C   but in ECC 6.0 I get the following error:
"   "END_OF_RECORD" must be a character-type data object (data type C, N,D, T or STRING) . "
I tried type-casting with field symbols but still not able to remove the error. Cannot convert end_of_record directly to type C as it may hamper the functionality. Plz advice how to remove the error without converting type x to type C
In the following code :
DATA: DELIMITER   TYPE C VALUE   CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
        end_of_record             TYPE x.
SPLIT data_file_i AT delimiter INTO it_ekko-rtype
                                          it_ekko-ebeln
                                          it_ekko-bsart
                                          it_ekko-lifnr
                                          it_ekko-bedat
                                          it_ekko-ekorg
                                          it_ekko-ekgrp
                                          it_ekko-bukrs
                                          it_ekko-zterm
                                          it_ekko-zbd1t
                                          it_ekko-zbd1p
                                          it_ekko-zbd2t
                                          it_ekko-zbd2p
                                          it_ekko-zbd3t
                                          it_ekko-inco1
                                          it_ekko-inco2
                                          it_ekko-waers
                                          it_ekko-wkurs
                                          it_ekko-kufix
                                          it_ekko-verkf
                                          it_ekko-telf1
                                          it_ekko-ihrez
                                          it_ekko-unsez
                                          it_ekko-angnr
                                          it_ekko-ihran
                                          it_ekko-submi
                                          it_ekko-loekz
                                          end_of_record.
where all these fields except " end_of_record " are of character type and "data_file_i " is a character type structure as defined below:
DATA :
BEGIN OF data_file_i OCCURS 0,
    record(1000),
END OF data_file_i,

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
                  CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP   = c_hex
RECEIVING
CHAR   = LV_TMP   .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
                         abap_char_utilities=>HORIZONTAL_TAB.

Cannot get exception-type to work

 WLS 60 SP1 (#101616)
 Cannot get <exception-type> to work. WLS shows standard “Internal error
 500” page instead of a custom error page. The custom error page is shown
 if <error-code> is used instead of <exception-type>.
 Any ideas? Thanks


Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How to resolve "Internal error: ABAP Report cannot be loaded" error

Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors         MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
   20   sy-subrc = sysubrc.
   21
   22   CASE SY-SUBRC.
   23     WHEN 0.
   24     WHEN 1.
   25 *     system_error
   26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
   27     WHEN 2.
   28 *     method_call_error
>>>>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   30     WHEN 3.
   31 *     property_set_error
   32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   33     WHEN 4.
   34 *     property_get_error
   35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   36     WHEN OTHERS.
   37       RAISE CNTL_ERROR.
   38   ENDCASE.
   39
   40 ENDFUNCTION.
Thanks in advance
Sunil Choudhury

Hi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen

Error: system extension cannot be used

I get the error "system extension cannot be used" and then it says below it:
The system extension "/System/Library/Extensions/AppleIntelAC97Audio.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.
it says the same for:
AppleIntelAC97Controller.kext
BJUSBLoad.kext
CHUDKernLib.kext
CHUDProf.kext
CHUDUtils.kext
EPSONUSBPrintClass.kext
hpPlugInInit.kext
KLog.kext
LexmarkUSBMerge.kext
prlhidhook.kext
prl_hypervisor.kext
prl_netbridge.kext
prl_tg.kext
prlusbconnect.kext
prl_video.kext
prl_vnic.kext
RBIOKitHelper.kext
Soundflower.kext
Wacom Tablet.kext
I have done permissions repair at least 10 times in a row and it still comes up with things to repair but is there another soloution?
Also, It says i have insufficient permissions to get onto my external HD now as well.
Anything will help...

I had the same problem. Then due to another unrelated problem I did a file system check in single user mode and this problem too went away. I am not sure if it will also work for you but no harm to try.
Shutdown, restart by pressing power button. As soon as you hear the chime, press cmd-s. After a while lot of text will roll down the screen, leave the keys. At the prompt, type fsck -fy. Note the space. then hit return. If at the end of the run you get something was repaired, then run it again till you get 'OK'. After that type reboot and you will boot into regular OS X. Then do whatever you did to get this message and see if it goes away.

Cannot find PDL type for output device LOCL in J1INCRT

Dear all
I am getting error in PRD system. When I am running J1INCRT (Customizing for Certificate Printing) the error
cannot find PDL type for output device LOCL
we are using ECC6 ,oracle 10g and windows 2003
Kernel release    701
Please suggest how to solve
Regards,
Kumar

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

APP-PAY-51119: Error was encountered when processing Element Type US_TAX_VE

Hi.,
Getiing Error while running the quickpay request.
Application :11.5.10.2
Database :10.2.0.5
OS : HP UX
Error
HR_51118_HRPROC_ERR_OCC_ON_ASG
ASGNO 179279
APP-PAY-51118: Error was encountered when processing assignment 179279
HR_51119_HRPROC_ERR_OCC_ON_ET
ETNAME US_TAX_VERTEX
APP-PAY-51119: Error was encountered when processing Element Type US_TAX_VERTEX
Invalid jurisdiction code found in primary work location

Please see (Payroll Process Fails: FORMULA_ERROR_TEXT A compiled version of the formula 431 cannot be found Compiled Version of formula cannot be found [ID 358881.1]).
Thanks,
Hussein

Data Manger error: the system cannot find the file specified.

Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
David

It really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter

Cannot find PDL type for output device '(Printer name)'

Hi,
After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
Cannot find PDL type for output device '(Printer name)'
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Any input will be off great help...
Regards
Pooja

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)
I am getting the above error in c#. Please help me. Thanks in advance
public IDataReader ExecuteReader(CommandBehavior behavior)
string query = "select * from Sales.Store";
SqlConnection readerconn = new SqlConnection("Data Source=localhost;Initial Catalog=AdventureWorks2000;Integrated Security=SSPI");
SqlCommand readercmd = new SqlCommand(query);
try
readerconn.Open();
readercmd = readerconn.CreateCommand();
readercmd.CommandText = query;
readercmd.CommandType = System.Data.CommandType.Text;
SqlDataReader TestReader = readercmd.ExecuteReader();
return TestReader; //Getting error at this line
readerconn.Close();
catch (Exception e)
throw new Exception(e.Message);

Hi,
Please firstly take a look at the documentation:
IDbCommand.ExecuteReader
Method
Users do not create an instance of a
DataReader class directly. Instead, they obtain the
DataReader through the
ExecuteReader method of the Command object. Therefore, you should mark
DataReader constructors as internal.
You need to use this method to get the IDataReader object, all the IDbCommand and IDataReader are in the Microsoft.ReportingServices.DataProcessing namespace. There's another IDataReader object which is in System.Data namespace, but they're actually two different
objects, that's why you got the exception.
For how to properly implement this Microsoft.ReportingServices.DataProcessing.IDataReader, please check this documentation:
Implementing a DataReader Class for a Data Processing Extension
It also provides code samples there.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error: /BIC/ZPROP_REM cannot be convertedin type DEC

Similar Messages

Maybe you are looking for