Error Box displays in JClient Form with no text (preview 9.0.3)

I am using Preview 9.0.3, with a JClient Form, running as an applet. When I execute the applet within JDeveloper, an Error box displays, but has NO text. When I try to close the box, it just keeps redisplaying, with no text. I am using the -Djbo.debugoutput=console, and the last statement to be logged is the SELECT statement from the Entity Object I am working with.
Is there any other diagnostic logging I can turn on to find out what the error is?
Any ideas?

Similar Messages

How to create a JClient form with one master block & multiple detail block?

Hello,
I am using Jdevelopver 10.1.2
I want to have a JClient Form with one master table A and two detail tables B, C.
But in the JClient Form wizard, I can only create a one master with one detail relationship. Can I create multiple details in that wizard ?
Thanks
Stephen

Create a JPanel based on the second detail table with the wizard and add manually the JPanel to the Master-detail Form.
Regards
Fred

Error message display for PO creation with reference to internal orders

Sir,
While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message when Budget is exceeded.
But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
Regards,
Srinivasa Murthy

Hi Anupam,
The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
This error comes during PO creation Process and PO can not be saved. This error message display is correct.
Item 001 Order 600643 budget exceeded
Message no. BP604
Diagnosis
In document item 001 Order 600643, budget for fiscal year 2009 was exceeded by 99,960,000.00 INR.
But my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
Regards,
Srinivasa Murthy

I want a JClient Form with one mater and two details

Hi,
In my JClient Form, I want to have one master view and TWO detail views. The two detail views are linked to the master view simultaniously. Can Jdeveloper do that?
and How?
Stephen

Sure. Just define the VO's and the relations between them and afterwards develop some independant panels which describe the VO's. You can then place each panel on a single panel and organize them the way you want.
However, there isn't a way to simply generate the entire deal with a single wizard. You will have to run the wizard multiple times for each of the panels you wish to create and then manually put them together.
Hope This Helps

List Box display to synchronize with Scroll bar.

I will like to know if anyone here can help to amend or advise on the attached VI in order to allow the List Box display to synchronize with the Scroll bar.
As the VI is in run mode, i would like to see 9.CD, 10.Troja, 11. Red... and so on to be displayed as it is being executed.
Thanks.
Attachments:
try.vi ‏13 KB

Hi Gelb,
Glad to hear you've got it working
I realised afterwards that my code will not work correctly if the last line is partially hidden, ie the list box does not display an exact number of lines. So I've added a +1 after the array size function to correct this, see attached vi.
You'll notice that I read the NumRows property of the listbox - I've done this so that if you decide to change the listbox height the code will still work without you having to go in and change anything. In your code you would have to change the constant (currently a 7) before the comparison primative to the new height. Also, in my new vi I've assumed the listbox height isn't going to change during the time it gets populated so I've move the NumRows property out of the for loop and read it only once - saves a bit of time
Using a for loop with auto indexing rather than a while loop also means that I don't need to index the input array every time or worry about when the loop will stop.
Hope this all helps
Dave
Message Edited by DavidU on 06-26-2008 08:59 AM
Attachments:
Scroll Listbox 2.vi ‏15 KB

How do I print my form with long text ?

I created a form in Adobe Acrobat 9 with fillable text fields. Some of our users need to print the form after completion, and my form is creating scoll bars to read text that is long and extends beyond the text box. How do I modify the form where all text will print? Does the text box just have to be larger or is there a feature I can change on the original document to enable this? I read in another post that it can be fixed in Acrobat but it did not say how to fix.

Beside the options pointed out by George, there's another option: to copy the text from the original fields to fields that are located on otherwise blank pages at the end of the document. So the original field will say (in the printed copy only!) something like "See the last page" and on the last page of the document you will have the full text from the original field.
This can be achieved using a custom-made script that is embedded in the file and executes just before the file is printed.
If you're interested in more information, you can contact me at try6767 at gmail dot com.

Can I copy a form with spry text fields?

I have two forms that are almost identical with the exception of a few fields. Instead of completely redoing the 2nd form I would like to just save the document in dreamweaver with a new name and change/add the fields I need. I've used spry text fields though. Will I have any issues with just copying and then changing this form as far as the spry files are concerned or am I just better off creating a whole new form?

Keep in mind that form field names need to exactly match your form-processing script.
Spry was abandoned by Adobe in late 2012. Since I don't use Spry for anything, I can't honestly say if the form validation will continue to work or not. I much prefer the ease of HTML5 form validation alone or with jQuery for older browsers.
HTML5 Form with jQuery Validation
So my answer is rebuild with HTML5 forms.
Nancy O.

Error while displaying Travel request form (ABAP WD :FITV_TRIP_FORM )

Hi
When I am trying to create a travel request form , and then trying to display form its throwing an error
"The following error text was processed in the system ECD : Error in module RSQL of the database interface".
The error occurred on the application server mtserpdev_ECD_00 and in the work process 0 .
Kindly suggest as form "FITV_TRIP_FORM" is already attached via feature . Am I missing some config or
Is it a issue of patch. (Currently we are at EHP 4 , and all the applications inlcuding FITV_TRIP_FORM are on WD ABAP).
Thanks
Abhay

Have you done the TRVFE feature configuration and made sure if this form exists in the system.
Regards,
Divya

How to display a JClient LOV with a empty textfield at startup?

Hi,
we develop an application using JClient to connect a swing client to a bc4j middletier. In one special form consisting of three LOVs (3x label,textfield,button ->LovBinding) we want two of the LOVs to display a empty textfield when the form is opened the first time. The standard LovBinding shows the first row of the corresponding viewobject initially, pretending that the user already has chosen a value. Is there an (easy) way to override this behaviour?
And what to do in the following scenario:
The user chooses a value from a LOV, that value is displayed in the textfield. Now the user changes his mind and wants to be the LOV-textfield empty again. Currently there's no solution for this.
We can think of several workarounds, but none of them seems to be a good solution...
Any ideas for that?
Thanks,
Torsten

Sorry, I try to be a bit more precise:
It's not clear whether you want the "Lov dialog" to show no selection on startup or the form that uses the LOV to display nothing in the "textField" on >startup?
Could you elaborate on this? A simple scenario may help. It's NOT the Lov dialog that should show no selection on startup. I wanted the textfield to display nothing, until I press the button which invokes the Lov dialog. The lov dialog allows me to select something and after pressing ok in the lov dialog I see me selection in the textfield.
The scenario is the following:
Imagine a form showing a combobox which allows the select a special type of value, does not matter. Additionally you have a lov combination consisting of a textfield and a button. The textfield should display a lookup value which can be selected via a lov dialog, which is invoked by the button.
And you have a "calculate" button, which has no binding. This "calculate" button runs some kind of code that takes the value of the combobox and the value of the lov's textfield (if a value was chosen) and does something.
The problem is the "if a value was chosen". I like to see an empty lov's textfield to indicate that nothing has been chosen solong. If I press the "calculate" button after choosing a value in the combobox and having nothing in the lov's textfield, the lov's textfield should be ignored by the following method.
Again, if you are using JComboBox/JListBox for Lov, then the default windows key to clean selection is Ctrl+(Mouseclick on the selected row)
If you want to display/allow no selection in the JULovButtonBinding's LovDialog, you pretty much have to do this by providing a custom LovPanel instead of >using the default one and implement the "no-selection" logic there.
And in case of no-selection, set the currency on the LovRSI to no row (call reset()). Are there more shortcuts like Ctrl+MouseClick in JClient?
Ok, what I intended was the following:
We have the scenario described above. The user selects a combobox value, then opens the lov dialog by pressing the button, chooses some value and presses ok in the lov dialog. Now he sees his selection in the lov's textfield. But: he changes his mind and thinks it would be better to reset the lov's textfield to the empty state, before pressing the "calculate" button. Because there is no kind of reset for the lov's textfield, the user has no chance to do what he wants.
Question is, can you think of an elegant way to solve this problem?

Image is not displayed in APEX Form with APEX utility Function

Dear APEX experts,
As i am new to the oracle apex development. I have just created the basic employee information form in which i upload the photograph of the employee. The photograph gets uploaded but it does not display properly. I have already referred the sample database application to display the image. Moreover, i have followed the same steps as it is used to display the product image in that application. Still i am unable to get result. I am getting following output:
<img src="apex_util.get_blob_file?a=35682&s=101496289174102&p=15&d=10639237623242912156&i=10639236703270912154&p_pk1=21&p_pk2=&p_ck=FCA12832591A1C706D76FDD589E551A2" />
Please help me seniors to solve this issue. How to display the image using this utility.

mehpandya wrote:
I have observed following HTML code after inspecting the two application.
1.Sample Database application:
In this application , the product image is uploaded and displayed correctly and following code is rendered in the HTML source.
<span id="P6_IMAGE" class="display_only" ><img src="apex_util.get_blob_file?a=64703&s=134073736366663&p=6&d=25732916709090782422&i=25433760606377189086&p_pk1=1&p_pk2=&p_ck=7E23190CC0BFE98BBE4CCE2ADFBBEF26" /></span>
2.Sample HRMS Application - Which i have created for learning.
In this application , the employee photo is uploaded but it is not displayed correctly. Following is code is rendered in the HTML.
"<span id="P15_EMPIMG" class="display_only" ><img src="apex_util.get_blob_file?a=35682&s=100541516379272&p=15&d=10639237623242912156&i=10639236703270912154&p_pk1=21&p_pk2=&p_ck=31A8328E0F5754D7CBD0FC0C6313B38A" /></span>"
Hence , in my application the code is not rendered perfectly and syntax is not completed.
following characters are rendered like this.: &lt , &quot , &gt , &amp.
So, is this the reason of not displaying the image???Yes.
To get a Display Item to render as HTML, in the item definition Security section set Escape special characters to No.
For a report column, ensure the Display Text As report column attribute is Standard Report Column rather than the default Display as Text (escape special characters).
Use a Display Image item and declarative BLOB support instead of this clunky manual method.
Please read the FAQ and forum sticky threads (if you haven't done so already.
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
The APEX documentation is here.

Possible Bug concerning JClient Forms with tables

If I instantiate a JClient Frame first time a lot of empty rows appear in the table, if there is NO DATA in the database table.
If there IS data in the database table, at the fist time everything is OK, but if I instantiate the JClient frame a second time, in the JClient table a lot of empty rows appear in addition to the expected ones.
To reproduce this behaviour you can create a single JClient Table Form and then add a component to instantiate a new Form of the actual one e.g. I have reproduced it changing the standard About Menu so that <About> instantiates and sets visible the Form again.
menuHelp.setMnemonic('H');
itemHelpAbout.setText("About");
itemHelpAbout.setMnemonic('A');
itemHelpAbout.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
FrameView1 frame = new FrameView1(app);
frame.setVisible(true);
Is this a bug ?
Is there a workaround for this behaviour ?

If I instantiate a JClient Frame first time a lot of empty rows appear in the table, if there is NO DATA in the database table.
If there IS data in the database table, at the fist time everything is OK, but if I instantiate the JClient frame a second time, in the JClient table a lot of empty rows appear in addition to the expected ones.This has been discussed on OTN at 10G JDBC Driver SQl Exception earlier.
Please see if suggested workaround works for your case.

ORA-00933 - Error in PL/SQL for Form with report.

Hello,
I am getting this error :
failed to parse SQL query:
ORA-00933: SQL command not properly ended
and my PL/SQL function body returning SQL is as follows:
Declare
q varchar2(32767);
w varchar2(4000);
v_total varchar2(10);
Begin
v_total:='TOTAL' ;
q:=' SELECT ASR_DB_CLIENT.CLIENT_NAME, ';
q:=q||' ASR_DB_OIS.ACCT_NAME, ';
q:=q||' ASR_DB_OIS.ACCT_NBR, ';
q:=q||' ASR_DB_OIS.INCEPT_DT, ';
q:=q||' asr_db_prod.MKT_CODE, ';
q:=q||' asr_db_prod.asst_clss, ';
q:=q||' ASR_DB_OIS.PROD_CODE, ';
q:=q||' ASR_DB_OIS.GROUP_CODE, ';
q:=q||' ASR_DB_PLAN.TAX_STAT, ';
q:=q||' asr_db_clnt_type.clnt_type_name, ';
q:=q||' asr_db_plan_type.plan_type_name, ';
q:=q||' ASR_DB_OIS.ACCT_type, ';
q:=q||' ASR_DB_PLAN.CNTRY_CODE, ';
q:=q||' ASR_DB_OIS.DISCRET_FLAG, ';
q:=q||' ASR_DB_OIS.ASST_BAL ';
q:=q||' FROM ASR_DB_OIS, ASR_DB_PLAN, ASR_DB_CLIENT, ASR_DB_PROD, ';
q:=q||' asr_db_plan_type, ';
q:=q||' asr_db_Clnt_type ';
q:=q||' WHERE';
q:=q||' ASR_DB_OIS.PLAN_ID = ASR_DB_PLAN.PLAN_ID and ';
q:=q||' ASR_DB_OIS.as_of_dt = ASR_DB_PLAN.as_of_dt and ';
q:=q||' ASR_DB_PLAN.CLIENT_ID = ASR_DB_CLIENT.CLIENT_ID and ';
q:=q||' ASR_DB_OIS.as_of_dt = ASR_DB_CLIENT.as_of_dt and ';
q:=q||' asr_db_ois.prod_code = asr_db_prod.prod_code and ';
q:=q||' ASR_DB_PLAN.plan_type_code = ASR_DB_PLAN_type.plan_type_code and ';
q:=q||' ASR_DB_Client.clnt_type_code = ASR_DB_clnt_type.clnt_type_code and ';
q:=q||' ASR_DB_OIS.AS_OF_DT = :p99_asofdate ';
IF :P2_ROLLUPSLEEVE = 'RU'
THEN
q :=q||' and ASR_DB_OIS.PARENT_OIS_ID is null ';
Else
q :=q||' and ASR_DB_OIS.ACCT_TYPE like "%"'||v_total||'"%" ';
q :=q||' and ASR_DB_OIS.PARENT_OIS_ID is not null ';
END IF;
return q;
end;
Why this is failing ?
Is "%"'||v_total||'"%" '; incorrect ?
P2_ROLLUPSLEEVE is a radio button.
Please advise....
Thanks,
HM

And
Also, I get the following error when I try few other things like
q :=q||' and ASR_DB_OIS.ACCT_TYPE = '||v_total||' ';
or
q :=q||' and ASR_DB_OIS.ACCT_TYPE = "||v_total||" ';
failed to parse SQL query:
ORA-00904: "TOTAL": invalid identifier
And
ORA-06550: line 43, column 41: PLS-00103: Encountered the symbol "TOTAL" when expecting one of the following: * & = - + ; < / > at in is mod remainder not rem <> or != or ~= >= <= <> and or like LIKE2_ LIKE4_ LIKEC_ between || member SUBMULTISET_ The symbol "* was inserted before "TOTAL" to continue.
When I try
q :=q||' and ASR_DB_OIS.ACCT_TYPE = "'TOTAL'" ';
Any helpful tips will be much appreciated.
Thanks,
HM

I am having problems downloading Mozilla Firefox. I select download and wait - then I select run. My computer then says it can't verify the site do I want to run anyway. When I select yes, an error box displays saying that the file is corrupt.

I have windows 7 on my computer. I am sure it is a setting issue but I do not know how to fix it.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files

I need help with a 1 Page Form with scrollable text field (5000 limit characters) and printing

Hello, I have no training in using Adobe Acrobat Pro or Livecycle Designer so I need major help with a 1 page form that I am attempting to create. Basically the form will be used to nominate employees for a Job Well Done Award.
The form contains the following:
1.) The name(s) of the employees being nominated and the date of the accomplishment.
2.) In the middle of the page I have a section for a write up, limited to 5000 characters, this is were I am needing the most help. A couple of things, about this section: The font is set at 11 and I don't want it to change. The text field has multiple-line, scroll long text enabled. The text field is a certain size and can only hold so much text, then it starts to scroll, which I am ok with, I like that feature. The issue I am having is during printing. I would like to keep the text field scrollable but when I print I would like to be able to print everything in that field. Executing this is the problem, I have no clue how to do it. I was hoping for some setting within Acrobat Pro or LiveCycle to be available, but the more I read and research this, it appears that it may require java, xml, basically some coding. I don't know for sure.
3.) Below the text field I have another field for the person nominating to type their name and right next to that another field for a digital signature.
4.) And finally below those two fields I have a Submit button that is setup to start email application so the form can be emailed to the proper inbox.
Thank you in advance.

With an Acrobat form the only thing you can do is export the text to
another location (like a blank field on another page) or to another file
format. With an LCD form you can expand the text box itself, but you'll
need to ask about that over at the LCD Scripting forum.

Filling out PDF forms with black text in preview

I am filling out my 1040 using apple preview and when I type something in a field, it is in dark blue font. How do I change that to black font?

http://www.graniteschools.org/C13/Professional%20Growth%20and%20Evalua/Document% 20Library/SEWE20050602.pdf

Error Box displays in JClient Form with no text (preview 9.0.3)

Similar Messages

Maybe you are looking for