Error BT616 when calling function module SXPG_COMMAND_EXECUTE in background

Hi All,
We use function module SXPG_COMMAND_EXECUTE with a custom command we defined in SM69 to move files in unix (mv command).
The function module call has worked fine for almost a year and recently we have been seeing an error (BT616) in our job lob (SM37) when the program is run in background. We have not been able to reproduce the error in foreground mode and it seems to be occuring only periodically in the background. (The appropriate SAP authorization objects where assigned to the batch job ID and the steps on the batch job.) We are in the process of setting up the trace flag and performing analysis on the trace log via ST11 to help identify the issue.
After perform analysis on SXPG_COMMAND_EXECUTE, the error is occurring when calling function module SAPXPG_END_XPG for exception 2, system failure, yet function module SAPXPG_END_XPG does not exist. I assume this is a program at the operating system level and is just a signature of the parameters to be passed to the operating system program.
Below is part of the SAP function module SXPG_COMMAND_EXECUTE that is failing.
* Now we have to wait for the termination of the external
* command if the caller wants us to.
    IF TERMINATIONWAIT = 'X'.
      CALL FUNCTION 'SAPXPG_END_XPG'
        DESTINATION DESTINATION
        IMPORTING   EXITSTAT = STATUS
                    EXITCODE = EXITCODE
        TABLES      LOG      = LOG
        EXCEPTIONS COMMUNICATION_FAILURE = 1 MESSAGE MSG
                    SYSTEM_FAILURE        = 2 MESSAGE MSG.
I performed a where used on function module SXPG_COMMAND_EXECUTE, and most of SAP programs call the function module with the parameter TERMINATIONWAIT = 'X', so I assume we should pass X as well.
Any ideas on what could be causing this issue?
Mike Vondran

I also remember I have this kind of issue, as I have some UNIX script at OS( UNIX) level . The problem was with the ID , as it dont have proper authorization at OS level ( UNIX ) . Please check this ID authorization. This could be the one of reasons if youre sure from SAP standpoint.
Hope thisll give you some guide line..
Thanks
Bye

Similar Messages

Problem when calling function module CV120_DOC_CHECKOUT_VIEW in background

Hi ,
I'm currently developping an abap program which extract document from KPRO for printing into a windows Folder.
For this I use standard function module CV120_DOC_CHECKOUT_VIEW.
When i run my program in foreground task there's no problem, but when i run it in background task the extract doesn't work. It seems that the system cannot connect to the Windows Network.
Whe the program is running in foreground task, the function module user SAPHHTP RFC destination, when it runs in background task it use SAPFTP destination .
Does somebody can help me ?
thanks in advance

Hi Ajay,
The program extract document into a folder on Windows Network that means on a server not on a PC .
I know that in background task ther's no connection with sapgui.
For example when i want to create a file on network n background task i use OPEN_DATASET instruction and that works fine.
My problem is the use of the standard function module CV120_DOC_CHECKOUT_VIEW in background task because when this function module is running in background task it use the SAPFTP rfc destination instead of SAPHHTP rfc destination in foreground task . I check the RFC destination , thoses works both . SO i think the problem comes from parameters given to the function module.
Regards.

Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.boots

When attempting to create a new Account in siebel integrated with OEDQ the following error occurs.
ERROR
Data Quality vendor-specific error: An error occurred when calling function 'sdq_init_connector ()' in connector ": "(-8) Exception!." Detailed error message: Exception thrown by Java: java.lang.UnsatisfiedLinkError: nio (Not found in com.ibm.oti.vm.bootstrap.library.path)(SBL-APS-00118)
STEPS
The issue can be reproduced at will with the following steps:
1) from EDQ director we have imported the EDQ_CDS,EDQ-REFERENCE DATA & EDQ_HISTORICAl DATA packages sucessfully.
2) Created dnd.param file in SIebel server SDQCOnnector folder.
3) Copied the libdnd.so file to siebsrvr lib directory(32 bit)
3) In dnd.param file we have mentioned the javalib file and instllation directory path(<Siebsrvr roo>/dnd/install)
4) Unzipped the EDQ-Siebel Connector files in dnd/install folder
5) Copied the dnd.properties file in dnd/install directory and modified it accordingly to point to installed EDQ instance.
6) Configured the Siebel components for EDQ integration.
7) Realtime EDQ jobs are running.
8) Create a new Account
Env details are
On : 8.2.2.14 [IP2014] version, Client Functionality
EDQ 11.1.1.7.4
IBM JDK 1.7 32 bit
Using Open UI
Any Champ have faced this issue and overcame it please let me know the resolution steps. your help is
Regards
Monoj Dey
9007554589

Hi Monoj,
A few questions:
- What OS is Siebel running on?
- What version of the Siebel connector are you using?
- Which libdnd.so file are you using?
- What's the contents of your dnd.parms file?
thanks,
Nick

Calling function module in the background task

Hello everybody,
I have a function module which wil create conditon records,the problem is it has performance problems because of which i am planning to make this as background job.
Can any one of please tell me how the call function ' fun name ' in background task behaves.
Regards,
Aruna

hi,
try to refer to the link below:
http://help.sap.com/saphelp_nw04/helpdata/EN/8f/53b67ad30be445b0ccc968d69bc6ff/content.htm
i hope it helps
regards
arjun

ABAP Dump when calling Function Module Starting New Task

Hi all. I have a tricky situation now, I am doing a POC on parallel processing.
I am getting an ABAP dump on the following Call Function line which is in class lcl_steer_114numc (See below for full program):
METHOD start.
    CALL FUNCTION 'Z_ZZCLS_STEER_114NUMC'
      STARTING NEW TASK me->id
      CALLING me->finish ON END OF TASK.
ENDMETHOD.                    "start
However I get the following ABAP dump:
Short text
    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"
The function module only contains a wait statement to simulate parallel processing. It is strange that it dumps here, because when I change the FM call to another call that has been triggered successfully from other classes, it still produces the same ABAP dump.
The background of the Proof Of Concept is to see if I can get an event to trigger the next process that depends on the outcome of the previous process. Parallel processes are run in the start methods by calling RFC.
<Garbled code removed>
Moderator Message: Please post relevant portions of the code only.
Edited by: Suhas Saha on Jul 17, 2011 1:17 PM

Well, the thing is I did manage to run 3 other Function Modules asynchronously succeesfully prior to that function call, with the same exact function call syntax. Further more, I have tried editing it with your suggestion but I get the exact same dump.
The complete function group can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZmFhNzcwMTgtYzQ0Mi00NzQ4LTg5YTMtNDNlNWUxYTM2NTg3&hl=en_US
The complete program can be downloaded here (slinkee file):
https://docs.google.com/leaf?id=0B3sua1Bw4XK4YWJmNjU3ODYtODRmMy00Nzg2LThkNTUtZjNkNDRhZGQ3MTUw&hl=en_US
The complete ST22 dump can be found here:
https://docs.google.com/leaf?id=0B3sua1Bw4XK4ZDU1YmFkZDAtOTU5MS00ZTgwLWFlZTktNWZhMDUxMzJlZWNl&hl=en_US
Basically I ST22 gives me the following:
Runtime Errors         RPERF_ILLEGAL_STATEMENT
Date and Time          17.07.2011 05:29:54
|Short text                                                                                |
|    Statement "CALL FUNCTION .. DESTINATION/STARTING NEW TASK/IN BACKGROUND TASK"                 |
|What happened?                                                                                |
|    Error in the ABAP Application Program                                                         |
|                                                                                |
|    The current ABAP program "Z_ZZB1_CLOSE_PERIOD_TEST2" had to be terminated                     |
|     because it has                                                                               |
|    come across a statement that unfortunately cannot be executed.                                |
And it explains it here (but is not helpful / relevant at all) as I ran the program from SE38.
|Error analysis                                                                                |
|    There is probably an error in the program                                                     |
|    "Z_ZZB1_CLOSE_PERIOD_TEST2".                                                                  |
|    The program was probably called in a conversion exit                                          |
|    or in a field exit. These are implemented by                                                  |
|    function modules called CONVERSION_EXIT_xxxxx_INPUT/OUTPUT or                                 |
|    USER_EXIT_xxxxx_INPUT.                                                                        |
|    Conversion exits are triggered during screen field transports or                              |
|    WRITE statements, field exits during field transports from the                                |
|    screen to the ABAP/4 program.                                                                 |
|    In this connection, the following ABAP/4 statements are not allowed:                          |
|                                                                                |
I hope you try to download the slinkee files and you will notice the call function I performed was no different than the other call function RFC calls that really are working.

Error message when using function module HRIQ_TESTRESULTS_CREATE

Hi,
I need your help, I'm trying to use function module HRIQ_TESTRESULTS_CREATE to create external test results, I've used this function before without subscores, now I need to create subscores, but I get the message: "Grading scale UBID applies".
The test type EXAM_UB_ING has assigned the UBID academic scale, which has a range from 1 to 677. Test type EXAM_UB_ING has 3 subtests (grammar, listening and reading) which also have the UBID academic scale assigned.
I think this isn't a customizing problem because I can create test results with subscores using the PIQST00 transaction, the error message happens just when using the function module.
I'm using this import parameters:
STUDENT:
PL:           01
OT:          ST
OBJID:     Student ID
TESTRESULTS_HEADER:
ISSUEDATE                      08.02.2010
VALIDDATE                      30.04.2010
TEST_GUID
TESTEO                         50000269
TRANSEO                        00000000
TESTTYPE                       EXAM_UB_ING
SESSIONID                      T1
SESSIONYEAR                    2010
ENTRYDATE                      08.02.2010
TESTPASSFAIL
TESTTOTRES                     458
TESTSCALE_ID
TOTALPERCENT1                   0,00
TOTALPERCENT2                   0,00
ENTRYMODE
SUBTY
Table TESTRESULTS_SUBSCORES:
SUBTESTID            GRAMMAR
SUBTESTTRES      GRAMMAR
SUBT                     203
SUBTESTID            READING
SUBTESTTRES      READING
SUBT                     120
Does anybody know which could be the error? Or any other function module which I can use? (with HRIQ_TESTRESULTS_PROCESS_DATA I get the same error message).
Thanks in advance!
Araceli

Araceli,
I just noticed. You are populating SUBTESTSCALE_ID in subtest result structure.That's the reason it's throwing this error. it is trying to match Scale ID from test with value in sub test result scale ID.
Prabhat Singh

Error encounter when calling function in where clause

I have created on e user define function.when i am trying to call in select statement it is working fine but when I try to call in where clause it gives me this
error
The following error has occurred:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "KINTANA.COMPARE_DATE", line 33
suggest me possible solution
Thanks Chanda

Hi,
i am trying to call in select statement it is working fine but when I try to call in >>where clause it gives me this I am suspecting the same function call is working fine in SELECT and not in WHERE clause.
Please have a look:
1 CREATE OR REPLACE FUNCTION f1
2     RETURN NUMBER IS
3 BEGIN
4     return 1;
5 EXCEPTION
6     WHEN OTHERS THEN
7     return -1;
8* END;
SQL>/
Function created.
SQL>
SQL>SELECT f1 FROM DUAL;
        F1
         1
1 row selected.
SQL>SELECT sysdate FROM dual WHERE 1=f1;
SYSDATE
15-MAY-06
1 row selected.
"afiedt.buf" 10 lines, 140 characters
1     CREATE OR REPLACE FUNCTION f1
2        RETURN NUMBER IS
3     BEGIN
4     NULL;
5     EXCEPTION
6        WHEN OTHERS THEN
7        return -1;
8*   END;
9 /
Function created.
SQL>SELECT f1 FROM dual;
SELECT f1 FROM dual
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "AVINASHT.F1", line 7
SQL>SELECT sysdate FROM dual where 1=f1;
SELECT sysdate FROM dual where 1=f1
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "AVINASHT.F1", line 7
SQL>DECLARE
2 a NUMBER ;
3 BEGIN
4 a := 0;
5 a := f1;
6 END;
7 /
DECLARE
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "AVINASHT.F1", line 7
ORA-06512: at line 5It would be better to understand if you post your function and how you are calling.
Regards

Error 'operation_no_authorization' when calling function 'SO_OBJECT_DELETE'

Hello all,
I am read the inbox content and after proccessing the mail i need to delete it.
I get 'operation_no_authorization' error.
which authorization is needed?

Hello,
I run FM 'SO_OBJECT_DELETE' on a user that has authorization of SAP_ALL and i still get error operation_no_authorization.
How can it be?
Thanks
Moshe

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

Type error while calling function module with in FOX formula

Hi,
I am getting following error while calling function module from FOX Formula:
"Types of parameter DAY_IN () and variable J_CALDAY(D) are inconsistent"
Following is the code:
DATA    I_CALDAY       TYPE 0CALDAY.
DATA    N_CALDAY       TYPE 0CALDAY.
DATA    KYF              TYPE KEYFIGURE_NAME.
FOREACH   I_CALDAY, KYF.
   CALL FUNCTION SLS_MISC_GET_LAST_DAY_OF_MONTH
      EXPORTING
         DAY_IN = I_CALDAY
      IMPORTING
         LAST_DAY_OF_MONTH = N_CALDAY.
    {KYF, N_CALDAY} = {KYF, L_CALDAY}.
ENDFOR.
Import parameter DAY_IN is of type sy-datum (that inturn is data element SYDATUM of data type DATS - same as 0CALDAY). Not sure why error is being thrown. Any idea? Thanks.
Edited by: SAP_BOY on Dec 4, 2009 5:26 PM

Hi,
I think It will not identify ,though you have (data element SYDATUM of data type DATS - same as 0CALDAY).Check it out by assigning it through a variable of type D.
Data I_CALDAY TYPE D.
Hope it may work out.
Regards,
Indu

Error :Required parameters missing when calling up module MARC_SINGLE_READ

Dear all,
When trying to do the production order confirmation i am getting the error "Required parameters missing when calling up module MARC_SINGLE_READ".How can this error be solved?
Thanks,
Kumar

Hi
Please activate the corresponding programs again. I think you got a short dump for this error, if yes, you can see the program's name there.
Best Regards.
Leon.

Why do I get Error -1073807343 when calling the open visa function ?

Hello,
I am running a Labview 6i under Linux (kernel 2.4) and I have Error -1073807343 when calling the open visa function. I have verified the name of the session (GPIB0::9::INSTR), and I can communicate with my instruments with ibic.
More informations : I use NIVISA 2.5 and nigpib-0.8.2. I have downloaded the lastest drivers of my instruments but it doesn't work better.
Thanks very much for your help.

We've had several NI-VISA releases since 2.5 - so I suggest you upgrade to NI-VISA 3.0. While there isn't anything specific to your type of problem in the Linux version of our readme.txt, I know we've made a number of other fixes.
While the most recent release is NI-VISA 3.1, I still recommend you upgrade only to 3.0.
This is because NI-VISA 3.1 requires the new NI-488.2 release for GPIB-ENET to be installed (even though you aren't using that product). This is due to some internal rearchitectures, and the PCI-GPIB product is not released. If you do want to go with NI-VISA 3.1, the new NI-488.2 release for GPIB-ENET on Linux will still work with the PCI-GPIB beta driver that you have installed.
Dan Mondrik
National Instruments

Calling Function Module in Update Task

Hello Experts,
Can anyone let me know about
Calling Function Module in Update Task.
Why do we use this " In Update Task " ??
How do we Use ??
What is the Use... ??
Kindly let me know....
Thanks and Regards
Pramod

hi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Real time scenario.
Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Hope this is helpful, Do reward.

Runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's

Hello colleagues,
I always get the runtime error OBJECTS_OBJREF_NOT_ASSIGNED when calling any standard GRC API's
For instance, lets take Function Modules:
I tried almost any of them but in particular:
GRPC_API_CONTROL_QUERY Load the list of controls
GRPC_API_ISSUE_QUERY Retrieve issues of the case
GRPC_API_ORGUNIT_QUERY Load list of Organizations
GRPC_API_RMPLAN_QUERY Retrieve remediation plans of case
GRPC_API_RISK_CONTROLS Retrieve the controls of the risk
and etc.
All of them return the runtime error OBJECTS_OBJREF_NOT_ASSIGNED, however I've provided Object ID's in the right format,
The same is for corresponding classes,
Does anyone have such problem before?
Appreciate your responses,
Thank you,
Best Regards,
Anton

Hi Anton,
We need to pass value for I_SESSION_ID. Because, when i execute FM: GRPC_API_RMPLAN_QUERY by giving correct I_OBJECT_ID as shown below, i'm also getting the same error.
On executing..
Getting following dump.
And attached is the dump analysis .
Thanks
KH

Error BT616 when calling function module SXPG_COMMAND_EXECUTE in background

Similar Messages

Maybe you are looking for