Error calling external web service over HTTPS

Hi everyone
I'm trying to call an external web service over HTTPS, and continually get the following error:
com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Peer sent alert: Alert Fatal: handshake failure
I haven't tried doing this before, so not quite sure where to start. I have a client certificate that must be used to access the remote web service, and I think the problem is associating the client cert with the web service call.
Has anyone else tried this before? Any suggestions of where to look?
I've had a brief look at Key Storage in NWA, but it's not something I'm familiar with - so not sure if it's even the right place to be looking.
Some help on this would be great!
Thanks
Stuart

Thanks Aleksandar
Here's the output from the trace. Unfortunately the SAP forums don't allow attachments, so it may be difficult to read. Please let me know if you see anything that may help.
Thanks
Stuart
Time Severity User Thread Location Message
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@fa1b67
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@4c8af
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@b6981b
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' are configured '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' default value is '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Loadin mapping file from location :[c:/mapping.txt]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Additional file for CTS configuration can not be found [c:\mapping.txt (The system cannot find the file specified)].
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider >>>>>>>>> ERROR: Could not find mapping for service QName=vipSoapInterfaceService, class=class com.verisign._2006._08.vipservice.VipSoapInterfaceService
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Creating client instance with WSDL URL [https://pilot-vipservices-auth.verisign.com:443/prov/soap/val/soap] (vipSoapInterfaceService) <com.verisign._2006._08.vipservice.VipSoapInterfaceService>
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Using SAP JAX-WS Implemetation to create service delegate.
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@5586b0
09:18:26:687 Path Administrator HTTP Worker [0] ~s.espbase.wsdl.exceptions.WSDLException Exception : Peer sent alert: Alert Fatal: handshake failure
java.lang.Exception
at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:147)
at com.sap.exception.BaseException.<init>(BaseException.java:89)
at com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException.<init>(WSDLException.java:34)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:140)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: org.w3c.www.protocol.http.HttpException: Peer sent alert: Alert Fatal: handshake failure
iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
at iaik.security.ssl.r.f(Unknown Source)
at iaik.security.ssl.x.b(Unknown Source)
at iaik.security.ssl.x.a(Unknown Source)
at iaik.security.ssl.r.d(Unknown Source)
at iaik.security.ssl.SSLTransport.startHandshake(Unknown Source)
at iaik.security.ssl.SSLTransport.getOutputStream(Unknown Source)
at iaik.security.ssl.SSLSocket.getOutputStream(Unknown Source)
at org.w3c.www.protocol.http.g.markUsed(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.getConnection(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpManager.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.a(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.URL.openStream(URL.java:1007)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:201)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:282)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:293)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:146)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:132)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@20ba3c
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@26e3bf
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@f827f6
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@a8646a
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@c449f1
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ B E G I N ].timerId=15
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ E N D ].timerId=[id:#15, elapsed: 0 ms.]

Similar Messages

BAD_CERTIFICATE error calling a web service over SSL in ALSB 2.6

We have a business service on an ALSB 2.6 server (running on WL 9.2.1) that connects to a web service over SSL. When we try to run it, we get the following exception:
<Sep 17, 2009 7:49:17 AM PDT> <Error> <ALSB Kernel> <BEA-380001> <Exception on TransportManagerImpl.sendMessageToService, com.bea.
wli.sb.transports.TransportException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
com.bea.wli.sb.transports.TransportException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
at com.bea.wli.sb.transports.TransportException.newInstance(TransportException.java:146)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOu
tboundMessageContext.java:310)
at com.bea.wli.sb.transports.http.HttpsTransportProvider.sendMessageAsync(HttpsTransportProvider.java:435)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
javax.net.ssl.SSLKeyException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
Truncated. see log file for complete stacktrace
This exception only occurs when hitting the web service through the bus. I have written a standalone Java application that posts to the web service and it works fine. I ran the application on the server where the ALSB is running using the same jdk (1.5.0_06 - the version that ships with 9.2.1) and the same cacerts file so I know it's not a problem with the certificate not being trusted. I have tried updating the cacerts file to the latest one distributed with JRE 1.6 and it still doesn't work.
After 8 hours of troubleshooting, I'm out of ideas. Does anyone have any suggestiosn?
Thanks.
Matt
Edited by: user6946981 on Sep 17, 2009 7:58 AM

Are you sure that your standalone application is using the same keystore (eg. cacert)? Default WebLogic configuration uses different keystore (demo).
I saw BAD_CERTIFICATE error only once and the cause was in keytool that somehow corrupted certificate during import. Deleting and importing certificate again helped me, but I doubt you have the same problem as your standalone application works.
Another idea ... Is hostname varification used? I know that the error message would look different if this was the cause, but try to add this parameter to your weblogic startup script: -Dweblogic.security.SSL.ignoreHostnameVerification=true
Last but not least, there is difference between your standalone application and ALSB runtime as WebLogic uses Certicom SSL provider. If you don't find the reason, contact Oracle support. Maybe they can help you to tweak Certicom provider in some way.

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

Error in calling External web service from soa suite 11.1.1.3

Hi
I am getting following error while calling external web service......
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.integration.platform> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <SOA-20136> <WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866047> <BEA-000000> < Payload after BaseActionHander.requestMessage :{parameters=oracle.xml.parser.v2.XMLElement@bd2382}>
####<Jan 20, 2011 6:54:26 PM IST> <Warning> <oracle.soa.mediator.common> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-490B9BABECE372A277DF> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529866063> <BEA-000000> < Properties after BaseActionHander.requestMessage :{ReferenceInstance=[email protected]63ea5,
####<Jan 20, 2011 6:54:29 PM IST> <Error> <oracle.webservices.service> <in-mum-adina05> <soa_server1> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <24b9eca72eaaa6a3:-4bc6fb7c:12da206ca2c:-7ffd-0000000000006287> <1295529869375> <OWS-04115> <An error occurred for port: FabricProvider: javax.xml.rpc.soap.SOAPFaultException: oracle.fabric.common.FabricInvocationException.>
I am able to hit external ws from soap ui and getting response but while calling from soa suite getting this error.
Any clues?
Thanks
Vibhor

WS Binding: exception durign SOAP invocation: java.util.NoSuchElementException
Looks like the error is in the data sent to or expected from the service in your composite. Check that audit logs and composite flow to make sure your soap message when using soapui matches what you are working with in soa suite.

HELP!!! Problem of Calling external Web Service from a Java Stored Procedur

1.I read the topic on http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html about Calling external Web Service from a Java Stored Procedur.
2.After I import .jar to Oracle what is required by the topic,som error occued.
Like: ORA-29521: javax/activation/ActivationDataFlavor class not found,
ORA-29545: badly formed class.
3.These is not enough .jar required on the topic? What can I do for ORA-29545: badly formed class?
Thany you!

Try this
Re: HELP! Loading Java Classes into Oracle ERROR

Problems calling external Web Service from a Java Stored Procedure

I'm using a sample code that I found here about calling external web services from a Java Store Procedure ( Credit Agency Web Service http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html ) but when I run it ,send this error. I dont know what can I do or what is missing. Please help me. Thanks.
Error: Premature EOF encountered [java.io.EOFException] [SOAPException: faultCode=SOAP-ENV:IOException; msg=Premature EOF encountered; targetException=java.io.EOFException: Premature EOF encountered] at org.apache.soap.SOAPException.(SOAPException.java:77) at oracle.soap.transport.http.OracleSOAPHTTPConnection.send(OracleSOAPHTTPConnection.java:765) at org.apache.soap.rpc.Call.invoke(Call.java:261) at oracle.otnsamples.wsclient.CreditAgencyServiceStub.authorizeCustomer(CreditAgencyServiceStub.java:84) at Products.jspService(Products.jsp:120) at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:139) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:795) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:794) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192) at java.lang.Thread.run(Thread.java:534)

I'm also facing problem in running the example on the page http://www.oracle.com/technology/sample_code/tech/java/jsp/samples/wsclient/Readme.html
I've Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and Oracle Application Server 10g (10.1.3). When I executed the following command,
loadjava -thin -user sys/password@localhost:1521:oradb -resolve -synonym -verbose -grant public %OC4J_HOME%/webservices/lib/soap.jar %OC4J_HOME%/lib/dms.jar %OC4J_HOME%/jlib/javax-ssl-1_1.jar %ORACLE_HOME%/lib/servlet.jar %OC4J_HOME%/j2ee/home/lib/mail.jar
... mentioned in step 3 under the "Configuring the Application" section on the above link, the process terminates with the following error
The following operations failed
class oracle/net/www/protocol/https/Handler: resolution
class oracle/net/www/protocol/https/HttpsURLConnection: resolution
class oracle/soap/client/ProviderManagerClient: resolution
class oracle/soap/client/ServiceManagerClient: resolution
class oracle/soap/providers/JavaProvider: resolution
class oracle/soap/providers/ejbprov/EntityEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatefulEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatelessEJBProvider: resolution
class oracle/soap/providers/sp/SpProvider: resolution
class oracle/soap/server/http/SOAPServlet: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection$1: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection: resolution
class org/apache/soap/messaging/Message: resolution
class org/apache/soap/rpc/Call: resolution
class org/apache/soap/rpc/RPCMessage: resolution
class org/apache/soap/rpc/Response: resolution
class javax/net/DefaultServerSocketFactory: creation (createFailed)
class javax/net/DefaultSocketFactory: creation (createFailed)
class javax/net/ServerSocketFactory: creation (createFailed)
class javax/net/SocketFactory: creation (createFailed)
class javax/net/ssl/DefaultSSLServerSocketFactory: creation (createFailed)
class javax/net/ssl/DefaultSSLSocketFactory: creation (createFailed)
class javax/net/ssl/HandshakeCompletedEvent: creation (createFailed)
class javax/net/ssl/HandshakeCompletedListener: creation (createFailed)
class javax/net/ssl/SSLException: creation (createFailed)
class javax/net/ssl/SSLHandshakeException: creation (createFailed)
class javax/net/ssl/SSLKeyException: creation (createFailed)
class javax/net/ssl/SSLPeerUnverifiedException: creation (createFailed)
class javax/net/ssl/SSLProtocolException: creation (createFailed)
class javax/net/ssl/SSLServerSocket: creation (createFailed)
class javax/net/ssl/SSLServerSocketFactory: creation (createFailed)
class javax/net/ssl/SSLSession: creation (createFailed)
class javax/net/ssl/SSLSessionBindingEvent: creation (createFailed)
class javax/net/ssl/SSLSessionBindingListener: creation (createFailed)
class javax/net/ssl/SSLSessionContext: creation (createFailed)
class javax/net/ssl/SSLSocket: creation (createFailed)
class javax/net/ssl/SSLSocketFactory: creation (createFailed)
class javax/security/cert/Certificate: creation (createFailed)
class javax/security/cert/CertificateEncodingException: creation (createFailed)
class javax/security/cert/CertificateException: creation (createFailed)
class javax/security/cert/CertificateExpiredException: creation (createFailed)
class javax/security/cert/CertificateNotYetValidException: creation (createFailed)
class javax/security/cert/CertificateParsingException: creation (createFailed)
class javax/security/cert/X509Certificate: creation (createFailed)
exiting : Failures occurred during processing
I've checked the path to all the jar files.
I tried to run the command again with system/password instead sys/password but then I got the following stacktrace:
The following operations failed
class oracle/net/www/protocol/https/Handler: resolution
class oracle/net/www/protocol/https/HttpsURLConnection: resolution
class oracle/soap/client/ProviderManagerClient: resolution
class oracle/soap/client/ServiceManagerClient: resolution
class oracle/soap/providers/JavaProvider: resolution
class oracle/soap/providers/ejbprov/EntityEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatefulEJBProvider: resolution
class oracle/soap/providers/ejbprov/StatelessEJBProvider: resolution
class oracle/soap/providers/sp/SpProvider: resolution
class oracle/soap/server/http/SOAPServlet: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection$1: resolution
class oracle/soap/transport/http/OracleSOAPHTTPConnection: resolution
class org/apache/soap/messaging/Message: resolution
class org/apache/soap/rpc/Call: resolution
class org/apache/soap/rpc/RPCMessage: resolution
class org/apache/soap/rpc/Response: resolution
exiting : Failures occurred during processing
Thanks in advance for any useful help.
-

Error while trying to call external web service from oracle PL/SQL 10.2 g

Hi I am trying to call an external web service from oracle PL/SQL .I am getting following run time error when I try to set the opeartion style.
But as per the oracle documentation this is one of the 2 valid values.
ORA-29532: Java call terminated by uncaught Java exception: operation style: "document" not supported.Teh webservice does expect the operation style as document.
Following is the code I am executing.
FUNCTION email
return varchar2
AS
service_ SYS.utl_dbws.SERVICE;
call_ SYS.utl_dbws.CALL;
service_qname SYS.utl_dbws.QNAME;
port_qname SYS.utl_dbws.QNAME;
operation_qname SYS.utl_dbws.QNAME;
string_type_qname SYS.utl_dbws.QNAME;
retx ANYDATA;
retx_string VARCHAR2(1000);
retx_double number;
retx_len number;
params SYS.utl_dbws.ANYDATA_LIST;
l_input_params SYS.utl_dbws.anydata_list;
l_result ANYDATA;
l_namespace VARCHAR2(1000);
begin
-- open internet explorer and navigate to http://webservices.imacination.com/distance/Distance.jws?wsdl
-- search for 'targetNamespace' in the wsdl
l_namespace := 'http://service.xmlservices.global.freedomgroup.com/';
-- search for 'service name' in the wsdl
service_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanService');
-- this is just the actual wsdl url
service_ := SYS.utl_dbws.create_service(HTTPURITYPE('http://hostname/GlobalWebServices/services/ClientCoreWebService?wsdl'), service_qname);
-- search for 'portType name' in the wsdl
port_qname := SYS.utl_dbws.to_qname(l_namespace, 'ClientCoreWebServiceBeanPort');
-- search for 'operation name' in the wsdl
-- there will be a lot, we will choose 'getCity'
operation_qname := SYS.utl_dbws.to_qname(l_namespace, 'postalCodelookup');
-- bind things together
call_ := SYS.utl_dbws.create_call(service_, port_qname, operation_qname);
-- default is 'FALSE', so we make it 'TRUE'
SYS.utl_dbws.set_property(call_, 'SOAPACTION_USE', 'TRUE');
-- search for 'operation soapAction' under <wsdl:operation name="getCity">
-- it is blank, so we make it ''
SYS.utl_dbws.set_property(call_, 'SOAPACTION_URI', '');
-- search for 'encodingstyle' under <wsdl:operation name="getCity">
SYS.utl_dbws.set_property(call_, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
-- search for 'binding style'
SYS.utl_dbws.set_property(call_, 'OPERATION_STYLE', 'DOCUMENT');
-- search for 'xmlns:xs' to know the value of the first parameter
-- under <wsdl:message name="getCityResponse"> you will see the line <wsdl:part name="getCityReturn" type="xsd:string" />
-- thus the return type is 'string", removing 'xsd:'
string_type_qname := SYS.utl_dbws.to_qname('http://www.w3.org/2001/XMLSchema', 'string');
-- in the line <wsdl:operation name="getCity" parameterOrder="zip">
-- the parameterOrder is 'zip', thus we put in 'zip'
-- the 'ParameterMode.IN' is used to specify that we will be passing an "In Parameter" to the web service
-- the 'ParameterMode.IN' is a constant variable in the sys.utl_dbws package
--vj this cud be either params or xml
SYS.utl_dbws.add_parameter(call_, 'param1', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.add_parameter(call_, 'param2', string_type_qname, 'ParameterMode.IN');
SYS.utl_dbws.set_return_type(call_, string_type_qname);
-- supply the In Parameter for the web service
params(0) := ANYDATA.convertvarchar('<TFGGlobalBasicXMLDO><systemCd>GLOBAL</systemCd><username>GlobalAdmin</username><password>GlobalAdmin</password><localID>1</localID></TFGGlobalBasicXMLDO>');
params(1) := ANYDATA.convertvarchar('<TFGGlobalPostalCodeLookupIDDO><postalCode>02446</postalCode><countryCode>USA</countryCode><stateCode>MA</stateCode><cityDisplay>BROOKLINE</cityDisplay><countyDisplay>NORFOLK</countyDisplay><include_inactive_flag>True</include_inactive_flag></TFGGlobalPostalCodeLookupIDDO>');
-- invoke the web service
retx := SYS.utl_dbws.invoke(call_, params);
dbms_output.put_line(retx.gettypename);
-- access the returned value and output it to the screen
retx_string := retx.accessvarchar2;
dbms_output.put_line('done' || retx_string);
dbms_output.put_line('PL/SQL DII client return ===> ' || retx_string);
-- release the web service call
SYS.utl_dbws.release_service(service_);
return retx_string;
end email;

thsi is urgent anybody ????

Web Dynpro application calling external web server using HTTPS giving error

Hello,
I don't know whether this is the right question in this forum but my ABAP web-dynpro applicaiton is expected to call another HTTP application on external web server through HTTPS. Presently it is calling through plain HTTP but we want to have HTTPS.
Here are the steps that we followed based on the link from help.sap.com
1] Received the certificate files from external web server
2] Created SSL Anonymous client
3] Imported the certificate files under this client and added into the certificate list
4] Re-started ICM
5] Created RFC Destination of type HTTP to connect to external server with SSL option and basic authentication. This RFC destination was working under plain HTTP.
When tried with Test connection it gave error "ICM_HTTP_CONNECTION_FAILED".
Any idea what might be missing. Thanks in advance.
Regards
Rajeev

Used proper certificate after which the error went away

Consuming an External Web Service using HTTPS and WS Security

Hello everyone,
I'm having a problem setting the security information in a SOAP header using a generated ABAP Client Proxy to consume an external web service that requires a User ID and Password in the Header section of the SOAP message. I need to use HTTPS. I'm on a WAS 7.01 SP08 system so from my readings, SAP is supposed to be able to add the username and password into the header section of the message. I can't seem to get SAP to add this information added to the header.
Here are the steps that I have taken to set the security values.
1) Created the client proxy from the WSDL in SE80. Basic Authentication on the Configuration tab was turned on automatically.
Note, Transport Security is set to None. I cannot change it.
2) Created an outbound set user name profile in transaction WSPROFILE with the appropriate username and password.
3) Added the profile to the default port in transaction LPCONFIG as an outbound under the WS Security section of the screen.
When I called the external Web Service, I got back the following error message:
com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC5509E: A security token whose type is [http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken] is required.
So, after reading through this Forum, I saw that I needed to use the SOAMANAGER. I set up a Proxy in the SOAMANAGER and manually created the Logical Port. This was the only way I could figure out how to set the Authentication Settings in the Logical Port to "User ID / Password". I then entered the User ID and Password.
However, I am still getting the same error message. I feel I am close but missing some small configuration to tell SAP to use WS Security with a Username token.
I'm not sure what I'm doing wrong, so any help would be appreciated.
Thanks,
Stephen

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

Calling external Web Service: PI is looking for a logical port and proxy.

Hi,
My scenario is ECC Proxy -> PI -> External Webservice (WS adapter).
the Web service adapter fails with the error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">WS_ADAPTER_SYS_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>System error while calling Web service adapter: Error when initializing SOAP client application: 'error_text'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I debug the message processing, it is looking for a port in table SSRVRTCONFIG, finds it(entry created automatically when WS adapter and the corresponding receiver agreement is activated in ID.
Then the program looks for an entry in "SRT_CFG_CLI_ASGN" for a proxy and logical port combination and errors out.
to be able to call an external web service, do we need a proxy to be created? I tried to create but the proxy creation fails because the external WSDL has some unsupported tags.
Also do we need to do any other configuration in SOAMANAGER? I am assuming not because the Web service is external.
Any help would be appreciated.
Thanks
Vijay

I already checked that note and made sure that the points mentioned are met. I have a trace set up on the target system and would know if the call reaches them and then fails in authorization. Right now the call doesnt even reach the target system and also from debugging I know that the program is looking for a proxy and then fails.

Calling ABAP Web Service at https destination

Hi!
I have created an ABAP Proxy that calls an external web service at an http destination. When trying the same for a service at an https destination I get the error message 
HTTP error (return code 110, message "" when specifying the URL for the WSDL file. I tried one of Thomas Jungs blogs on HTTPS services (/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https), but here he says that "When we begin to get differences (From http setup) is in the setup of the Logical Port". Am I missing something? Some configuration to be done?
Thanks for your input!
-Ole
Message was edited by:
Ole Mugaas

Hi!
Do you mean trying to access the WSDL through an already defined HTTP connection? My problem arises when trying to enter the URL to the WSDL during proxy generation...

Error testing external web service ICM_HTTP_CONNECTION_FAILED

Hi All,
I have created proxy class to consume external web service also created logical port but while testing the service through SE80, I am facing error "SOAP:1,023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")" I have gone through many threads for similar error but not able to resolve the issue. I have tried various WSDL from samples given in sdn but still facing same error. Also tried to access any external URL through sample program as follows, but it gives same error while receive method (400 ICM_HTTP_CONNECTION_FAILED)
sample used program to call URL : gets dump with error(400 ICM_HTTP_CONNECTION_FAILED)
report zsant.
DATA: client TYPE REF TO if_http_client,
 html TYPE string.
****Create the HTTP client
TRY.
 CALL METHOD cl_http_client=>create_by_url
 EXPORTING
 url = 'http://www.google.com/'
 IMPORTING
 client = client
 EXCEPTIONS
 OTHERS = 1.
 client->send( ).
 client->receive( ).
 html = client->response->get_cdata( ).
 write: / html.
 client->close( ).
CATCH cx_root.
 WRITE: / 'HTTP Connection error'.
ENDTRY.
also tried activating services in SICF, didnt worked. so please suggest if any solution for this, are there any basic settings we need to do to the SAP system before cosuming or working on web services?
SAP version: EHP4 FOR SAP ERP 6.0 / NW7.01
Edited by: santrosh on Feb 27, 2010 10:21 AM

Hello,
 
The first thing you should do is to check that your application server can reach the service your are trying to call. I suggest to try a:
 
telnet <remote_service_url> <remote_service_port>
 
from the command line of your server.
 
You should get a blank screen if your server reaches the remote server and something like connecting to <remote_service_url> if you don't.
 
Yours,
 
Joseba M. Iturbe

Errors calling oracle web service from pl/sql

Oracle application server version 10.1.2.2.0
Jdeveloper version 10.1.2.1.0
I have published a function of an oracle database package as a web service using jdeveloper by creating a connection to my database and right clicking on the package and selecting publish as a web service. I accepted all the defaults and deployed the web service to my application server also using jdeveloper. I have been able to invoke the web service from the url which was generated.
I now want to invoke this web service from another pl/sql procedure in the same database as the function I've published as a web service using the utl_dbws facility but get the following error
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: No Deserializer found to deserialize a 'http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS/:p_group_id' using encoding style 'null'. [java.lang.IllegalArgumentException]
I have amended the wsdl to look like this
<?xml version = '1.0' encoding = 'UTF-8'?>


<wsdl:definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:s="http://www.w3.org/2001/XMLSchema"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:tns="http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS/"
xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
targetNamespace="http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<s:schema elementFormDefault="qualified"
targetNamespace="http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS/">
<s:element name="totalliveusers">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="p_group_id" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="totalliveusersResponse">
<s:complexType>
<s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="totalliveusersResult" type="s:int"/>
<s:element minOccurs="0" maxOccurs="1" name="p_group_desc" type="s:string"/>
</s:sequence>
</s:complexType>
</s:element>
</s:schema>
</wsdl:types>
<wsdl:message name="totalliveusersSoapIn">
<wsdl:part name="parameters" element="tns:totalliveusers"/>
</wsdl:message>
<wsdl:message name="totalliveusersSoapOut">
<wsdl:part name="parameters" element="tns:totalliveusersResponse"/>
</wsdl:message>
<wsdl:portType name="totalliveusersSoap">
<wsdl:operation name="totalliveusers">
<wsdl:input message="tns:totalliveusersSoapIn"/>
<wsdl:output message="tns:totalliveusersSoapOut"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="totalliveusersSoap" type="tns:totalliveusersSoap">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="totalliveusers">
<soap:operation
soapAction="http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS/totalliveusers"
style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="totalliveusers">
<wsdl:port name="totalliveusersSoap" binding="tns:totalliveusersSoap">
<soap:address location="http://fujibox09/FinalTestWS-Project-context-root/FinalTestWS"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
The function has an in varchar2 parameter and an out varchar2 parameter and returns a number
Can anyone help?

Hi,
On way we can call a web service is to pass the Web Service URL to UTL_HTTP package:
Sample Web Service URL
===================
lv_url :=
'http://67.97.189.151:8888/plsqlsample/dbfunc?invoke=placeOrder'
|| '&'
|| 'param0=1'
|| '&'
|| 'param1=1'
|| '&'
|| 'param2=1';
Sample Call using UTL_HTTP
=====================
SELECT UTL_HTTP.request (lv_url)
INTO lv_result
FROM DUAL;
Thank you.
Regards,
Balu

Web Service over HTTPS

Hi All,
We are trying to call the web service deployed in a .Net Server . While making call we are getting some error. Can anyone help me in rectifying the problem.
Error
[java] javax.xml.rpc.JAXRPCException: failed to invoke operation 'ADD' due
to an error in the soap layer (SAAJ); nested exception is: Message[ failed to se
rialize interface javax.xml.soap.SOAPElementweblogic.xml.schema.binding.Serializ
ationException: mapping lookup failure. class=interface javax.xml.soap.SOAPEleme
nt class context=TypedClassContext{schemaType=['http://tempuri.org/']:ADD}]Stack
Trace[
[java] javax.xml.soap.SOAPException: failed to serialize interface javax.x
ml.soap.SOAPElementweblogic.xml.schema.binding.SerializationException: mapping l
ookup failure. class=interface javax.xml.soap.SOAPElement class context=TypedCla
ssContext{schemaType=['http://tempuri.org/']:ADD}
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:328)
[java] at weblogic.webservice.core.DefaultPart.toXML(DefaultPart.java:2
97)
[java] at weblogic.webservice.core.DefaultMessage.toXML(DefaultMessage.
java:645)
[java] at weblogic.webservice.core.ClientDispatcher.send(ClientDispatch
er.java:206)
[java] at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDisp
atcher.java:143)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:457)
[java] at weblogic.webservice.core.DefaultOperation.invoke(DefaultOpera
tion.java:443)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:56
6)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:41
9)
[java] at examples.webservices.client.dynamic_wsdl.Main_org.main(Unknow
n Source)
[java] Caused by: weblogic.xml.schema.binding.SerializationException: mappi
ng lookup failure. class=interface javax.xml.soap.SOAPElement class context=Type
dClassContext{schemaType=['http://tempuri.org/']:ADD}
[java] at weblogic.xml.schema.binding.RuntimeUtils.lookup_serializer(Ru
ntimeUtils.java:151)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:187)
[java] at weblogic.xml.schema.binding.RuntimeUtils.invoke_serializer(Ru
ntimeUtils.java:174)
[java] at weblogic.webservice.core.DefaultPart.invokeSerializer(Default
Part.java:324)
[java] ... 9 more
[java] ]
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:58
6)
[java] at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:41
9)
[java] at examples.webservices.client.dynamic_wsdl.Main_org.main(Unknow
n Source)
[java] Exception in thread "main"
[java] Java Result: 1
all:
Client Code we are using
import java.net.URL;
import javax.xml.rpc.ServiceFactory;
import javax.xml.rpc.Service;
import javax.xml.rpc.Call;
import javax.xml.rpc.ParameterMode;
import javax.xml.namespace.QName;
import javax.xml.rpc.Service;
public class Main_org {
public static void main(String[] args) throws Exception {
// Setup the global JAXM message factory
System.setProperty("javax.xml.soap.MessageFactory",
"weblogic.webservice.core.soap.MessageFactoryImpl");
// Setup the global JAX-RPC service factory
System.setProperty( "javax.xml.rpc.ServiceFactory",
"weblogic.webservice.core.rpc.ServiceFactoryImpl");
// create service factory
ServiceFactory factory = ServiceFactory.newInstance();
// define qnames
String targetNamespace ="http://tempuri.org/";
QName serviceName =
new QName(targetNamespace,
"Service1");
QName portName =
new QName(targetNamespace,
"Service1Soap");
QName operationName = new QName(targetNamespace,"ADD");
URL wsdlLocation =
new URL("http://10.50.7.101/DemoWebService/Service1.asmx?WSDL");
// create service
Service service = factory.createService(wsdlLocation, serviceName);
// create call
Call call = service.createCall(portName, operationName);
call.setOperationName(operationName);
// invoke the remote web service
String result = (String) call.invoke(new Object[] {
new Integer(10),"BEAS"
System.out.println("\n");
System.out.println("This example shows how to create a dynamic client application that invokes a non-WebLogic Web service.");
System.out.println("The webservice used was: http://services.xmethods.net/soap/urn:xmethods-delayed-quotes.wsdl");
System.out.println("The quote for BEAS is: ");
System.out.println(result);
Thanks and Regards,
Sunil

Hi,
First create wallet. Place files to server folder and then configure your Apex instance.
http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21678/adm_mg_service_set.htm#sthref264
Then you should be able consume HTTPS web services
Regards,
Jari

Error calling external web service over HTTPS

Similar Messages

Maybe you are looking for