Error: Can't load libJPlatin.so -(JNI Library)in SAP GUI for java 7.0 -AIX

Hi,
I am getting error in SAP GUI for java 7.0 -AIX
Error: Can't load libJPlatin.so -(JNI Library)
I ran command as
./guistart /H/localhost/S/sapdbIND
I gave 777 permission to corressponding library.

It's on AIX.
I am getting error as below:
^C# ./sapgui /H/punlparidm06 /S/sapdbIND
ERROR #############################
07.03. 12:48:37.619 ERROR: Attempt to load shared library /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so failed.
07.03. 12:48:37.619 ERROR: The library file exists, so either the program
07.03. 12:48:37.619 ERROR: don't has the privileges to access the library
07.03. 12:48:37.619 ERROR: or the library is not loadable by the shared object loader
07.03. 12:48:37.619 ERROR: Technical information:
07.03. 12:48:37.619 ERROR: Error location: GuiJniLoader.loadPlatinLibrary()
07.03. 12:48:37.619 ERROR: Error message : /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so: load ENOEXEC on shared library(s) /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so
ERROR #############################
java.lang.UnsatisfiedLinkError: /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so: load ENOEXEC on shared library(s) /local/SAPClients/SAPGUI7.00rev2.1/bin/libJPlatin.so
 at java.lang.ClassLoader$NativeLibrary.load(Native Method)
 at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:2144)
 at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1973)
 at java.lang.Runtime.load0(Runtime.java:773)
 at java.lang.System.load(System.java:887)
 at com.sap.platin.r3.util.GuiJniLoader.loadPlatinLibrary(GuiJniLoader.java:114)
 at com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:24)
 at com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:289)
 at com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:316)
 at com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:860)
 at com.sap.platin.base.logon.GuiImpl.evalCommandLine(GuiImpl.java:275)
 at com.sap.platin.base.logon.GuiImpl.<init>(GuiImpl.java:44)
 at com.sap.platin.base.logon.GuiImpl.main(GuiImpl.java:447)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.micro.Microkernel.invokeMainMethod(Microkernel.java:1670)
 at com.sap.platin.micro.Microkernel.startApplication(Microkernel.java:1750)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.Gui.main(Gui.java:65)
java.lang.Exception: JniAgiLibAdaptor.<init>: Cannot load JNI library
 at com.sap.platin.r3.protocol.diag.JniAgiLibAdaptor.<init>(JniAgiLibAdaptor.java:25)
 at com.sap.platin.r3.protocol.diag.GuiDiagToAutomationParser.configure(GuiDiagToAutomationParser.java:289)
 at com.sap.platin.base.connection.GuiConnection.open(GuiConnection.java:316)
 at com.sap.platin.base.application.GuiApplication.createConnection(GuiApplication.java:860)
 at com.sap.platin.base.logon.GuiImpl.evalCommandLine(GuiImpl.java:275)
 at com.sap.platin.base.logon.GuiImpl.<init>(GuiImpl.java:44)
 at com.sap.platin.base.logon.GuiImpl.main(GuiImpl.java:447)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.micro.Microkernel.invokeMainMethod(Microkernel.java:1670)
 at com.sap.platin.micro.Microkernel.startApplication(Microkernel.java:1750)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
 at java.lang.reflect.Method.invoke(Method.java:391)
 at com.sap.platin.Gui.main(Gui.java:65)
ERROR #############################
07.03. 12:51:52.173 ERROR: GuiConnection: Connect failed
07.03. 12:51:52.173 ERROR: JniAgiLibAdaptor.<init>: Cannot load JNI library
ERROR #############################

Similar Messages

Error with SAP GUI for Java 6.40 rev6

Hello,
we have a problem with the print preview on SAPGUI for Java Version 6.40rev6.
The problem occurs on Linux (Ubuntu and Suse) but also on WindowsXP.
So i guess it's a problem with the Sap Client?
Instead of the print preview only the message:
"No pilot configured for 'application/pdf'"
On the Ubuntu and WindowsXP systems we testet the SAPGUI for Java 7.10rev5 which works perfectly, but we can't use it on the Suse systems because their libc is too old.
regards,
Piotr

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

Error can't load Servlet org.apache.struts.action.ActionServlet

Hi,
I have SAP J2EE 6.20 installed on linux machine. I am trying to deploy struts framework based application and while deploying it..... I am getting error message:
Error can't load Servlet org.apache.struts.action.ActionServlet : java.lang.NoClassDefFoundError: org/xml/sax/SAXException
07 19:27:48 - ***********************************************************
08/10/07 19:27:48 - Applying user role management mappings.
08/10/07 19:27:48 - Start updating EAR-file...D:\SAPJ2EE Client\deploying\sambodh\sambodh.ear
08/10/07 19:28:26 - Temp files deleted...
08/10/07 19:28:26 - Ear-file updated successfully for 37860ms.
08/10/07 19:28:27 - Start deploying ...
08/10/07 19:30:35 - Ear-file uploaded to server for 128047ms.
08/10/07 19:30:37 - Successfuly deployed! Deployment took 1953ms.
08/10/07 19:30:37 - WARNING : Deploy service return folowing WARNINGs:
Error can't load Servlet org.apache.struts.action.ActionServlet : java.lang.NoClassDefFoundError: org/xml/sax/SAXException
Deployment took 1953ms.
08/10/07 19:30:37 - ***********************************************************
First time when I got this error, I added struts.jar in my server's <inst_dir>/alone/additional_libs/...... but then also error still exists... Do I have to start SAP J2EE instance once again and then deploy my application?
Can anyone help me out in this as this is very very very imp.
regards

Hi,
As per your actions above I believe you have already found SAP Note 435363.
Basically for a struts application there are no special requirements other than
1. Make a reference to the inqmyxmltoolkit from the application that is going to use struts before the deployment
2. Put the struts library into WEB-INF/lib of the application (struts can't be shared among applications)
3. Deploy the application
For making the reference you can:
1. Telnet to the Engine (if you run it as a service and do not have access to its shell directly)
If telnet port on the Engine dispatcher is 2323
telnet localhost 2323
2. Jump to the server node
for example if the application node's cluster id is 4001
jump 4001
3. Execute the commands
add deploy
changeref -m MyApplication library:inqmyxml
So if it does not work, then I see two reasons possible:
1. You are using a really old version of the 6.20 Engine - check if you are on PL41.
2. You have misspelled the name of your application in the reference. The names are case sensitive so you need to be careful. MyApplication is not the same as myApplication or myapplication.
Regards,
Iavor

Screensaver error: "Can't load bundle"

Hi,
I downloaded a screen saver (from a trustworthy source) in a .sit file, unzipped it to a .saver file, and when I try to load it I get the following error message:
"Screen saver “ico screensaver” did not load properly. Please select another screen saver.
Error: Can’t load bundle"
I am running on an iMac with Leopard 10.5.6 ...
Any suggestions?

Contact the author of the screen saver. Sounds like it's damaged. Of course, if the screen saver came packaged in a .sit file, I would seriously re-consider using the screen saver. Using a .sit file was once the standard, but not for a long time. Any developer these days who puts files in a .sit file for distribution is demonstrating that he/she knows squat about the Mac, and thus calling into question his/her ability to write software for the Mac.
(I'm not just saying that to be mean... it's likely that putting it in a .sit file damaged the file.)
Message was edited by: Thomas A Reed

SAP GUI FOR HTML - SAP Netweaver loading screen

We have an SAP EP7 portal with an ECC 6.0 R/3 backend. In the portal I have an SAP Transaction iView using transaction code PA64. The display in the portal uses SAP GUI for HTML.
The iView loaded correctly (i.e. displayed the transaction screen correctly in the Portal Content Area) until our recent SP upgrades to the R/3 backend and portal. For the backend we moved from SP13 to SP15. For the portal we moved from SP14 to SP18.
The issue that I now have is that an SAP Netweaver (SAP GUI FOR HTML) loading screen now appears (for about 5 seconds) prior to the PA64 transaction screen being displayed in the Portal Content Area.
Whilst I accept that this is not a major issue, I would like to suppress the display of this loading screen. Does anyone know how this can be achieved?
Many thanks
Audre Beenen

Thanks Michael. We also updated our system and are having the same issue. As you advised and I see in the SAP note, I'm going to add the ~nosplash parameter. We do have SAPKB70017. Is there a particular value associated with that parameter when it is added in SICF?
Thanks,
Pam Laverty

Error when testing SAP GUI for HTML

Hi experts,
i am getting the error "Service cannot be reached - the termination occured in system <sysid> with error code 403 and for the reason forbidden" when I test the service SAP GUI for HTML for transaction sicf. I am able to enter mit username and apssword und click login, and then iI get this error. Can anyone give me a hint?
Kind regards,
Simon

Hi,
Try publish all services on R/3, using SIAC_PUBLISH_ALL_INTERNAL transaction.
Hope this helps,
Iván.

The page cannot be displayed: ITS error: SAP GUI for HTML

Hello,
I have created an iView that connects with a ECC system. When I clic on System Administration --> Support --> SAP Application --> SAP Transaction :
System: ECC
Transaction: su01
SAP GUI Type: SAP GUI for HTML
It shows: The page cannot be displayed.
It's manadory to use SAP GUI for HTML. Please, Do you have any idea??
Thank you
Best,

Hello Virginia Rodríguez,
1)Kindly check that System ECC in Portal is Up and Running under System Administration.
2) if u r done with first step then can try SAP GUI for Window in creation of Iview
it will Work.
Regards.
Soni Vinit

How can I fix error R6034 to load the C runtime library

When I turn on my PC (Windows 7) the error R6034 related to "an application trying to load the C runtime library" appears. It started after trying to update iTunes, which I could not complete after several times.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99173)

Help with strange error Can't load IA 32-bit .so on a IA 32-bit platform

Hi guys
I'm stuck on this problem for so long, it would be great if some one can help me out. I use jni to build a interface to access an native library and I have successfully get in running on my development environment, but when at deployment to another box, I get the following message.
/data/tomcat/app/libXXX.so Can't load IA 32-bit .so on a IA 32-bit platform
I have checked the configuration of LD_LIBRARY_PATH to point to the dir of the libXXX.so file. Is this error caused by dynamic link library missing something when it is moved to the deployment environment ? or is it because I'm not building it properly ? or the os version version ?? Thanks a lot guys.
the libXXX.so is build using the following line:
gcc -g -fno-exceptions -fPIC -DPIC -shared -I$JAVA_HOME/include/ -I$JAVA_HOME/include/linux -I./include -I./lib/gcc/ -lapi_v2_Core -lgrammarsCNT -lCryptoLib -lcontainer -ledi -ledicont -ledixml -ltcpsocket -lzlib -lexpat XXX.c -o ../../../target/classes/libXXX.so
Development Environment:
Deployment Environment
Tomcat Version = Apache Tomcat/5.5.14
JVM Version =      1.5.0_11-b03
OS Name = Linux
OS Version = 2.6.9-11.ELsmp
OS Architecture = i386
Deployment Environment
Tomcat Version = Apache Tomcat/5.5.20
JVM Version =      1.5.0_11-b03
OS Name = Linux
OS Version = 2.4.21-15.0.3.ELsmp
OS Architecture = i386

This error this being generated from linux when I execute the Jasper. I have jdk1.5.0_11 installed.:
org.apache.jasper.JasperException: /opt/jdk1.5.0_11/jre/lib/i386/xawt/libmawt.so: Can't load IA 32-bit so on to IA 32-bit platform.
Somebody can help me with this is urgent.

12c on Win7 64-bit - ERROR Can't load IA 32-bit .dll on a AMD 64-bit platform'

My experience is not with XP but with Windows 7 64-bit. with Java for 64-bit, I cannot run Net Config nor the DBCA.
Initially this was the error I got
ExceptionMSG: 'C:\Windows\System32\msvcr100.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform'
ExceptiontoString: 'java.lang.UnsatisfiedLinkError: C:\Windows\System32\msvcr100.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform'
[main] [ 2013-08-24 15:36:04.855 CST ] [WindowsSystem.<init>:424] Failed to load SRVM library: oracle.ops.mgmt.nativesystem.NativeException: PRKN-1008 : Unable to load the shared library "MSVCR100" or a dependent library, from
then I skipped running the Netconfig & DBCA. Finished the installation.
Then did some work around like using the Net Manager instead of Net Config Assistant. so I was able to create a LISTENER
then when I tried the DBCA. I kept getting
oracle.cluster.impl.winsecurity.WinSecurityNative.enableWsecTracing(Loracle/ops/mgmt/nativesystem/NativeResult;)V
Any ideas?
Thanks

Any ideas?
Yes - for starters tell us, in English, what it is you are actually trying to do.
Initially this was the error I got
Got from doing what? We don' t know what you tried to do.
then I skipped running the Netconfig & DBCA. Finished the installation.
What installation? We don't know what you are trying to install or what you have done to install it.
First tell us what you were trying to do.
Then SHOW US exactly what you did to try to do that. EXACT means copy and past the commands you used and the response you got to those commands.
Also post a link to the installation guide that you are using to do the install and confirm that your environment meets the installation requirements and that you have done each and every step.

Can't load or rebuild iPhoto library

My iPhoto library hasn't been appearing. I've tried going through the 4 repair options (that show when I open with Command+Option) and have tried the rebuild a few times now. Each time I try to rebuild, it stalls at the same place (pic attached). From there, nothing happens and my photos are trapped in the library.I have also tried moving the library to an external hard drive and loading it into iPhoto from there and it simply does nothing. If i open the application again, it goes to the regular "get started" page.
I have a large library of 280GB. I'm not sure how many images are in there.
Can anyone help me restore my library? Should I be using Aperture for a library this size?

Thanks LarryHN,
I've gone through this now with some success. However the library is now 167GB down from 280GB. With that many photos, I can't easily tell if anything is missing. Is there any reason for such a large drop in size of the library? I thought maybe it was stripping duplicates but I couldn't have had more than a few duplicates.
Also, the rebuild stripped the division of photos into 'events'. Is that normal?
Thanks

Error-can't view photos in photo library using this version of iphoto .

Hi, I recently bought a macbook air and wanted to transfer pictures to it from my old mac (macbook 10.4.11). I viewed the pictures through file sharing, but was unable to finish saving most of the pictures that day.
When I try and view my iphoto photos now from/and on the macbook or the macbook air, it tells me I am unable to view the photos (you can't open your current photo library using this version of iPhoto. You have made changes to your photo libray using a newer version of iPhoto. Please quit and use the latest version of iPhoto.) I can't download the latest version of iphoto on that computer because it's 10.4.11. When I try to view the photos on the macbook air through file sharing (like I had done previously and it worked) it gives me the same message as above and I have the most recent version of iPhoto on the macbook Air. Anyone able to help me out?? I am unable to view any of my photos, is there any other way of opening photos other then through iphoto?? Thanks, Bo

If you opened an older iPhoto library with a newer version of iPhoto you received a warning that the library would be converted and that this can not be undone so you will have to either:
1 - Load your backup from before the conversion;
2 - upgrade to iPhoto '09 on the old system (which will require an OS upgrade too); or
3 - create a new library on the old system and reimport the photos form the originals folder on the library that you mistakenly upgraded
LN

Asha 501.1: Wireless error: Can't load this page a...

Hello.
I have a Nokia Asha 501.1 running Asha Platform 1.0.
I am using this a test device and I do not have a SIM card and just trying to use the device over WiFi. However, when I open the Internet app and browse to a URL, I receive the following error message:
Can't load this page at the moment. Check your phone's date and security settings.
Is it possible to use the device without a SIM card and on WiFi only? How can I resolve this error?
Thanks,
Todd

Read THIS THREAD I Have tried this a while back when i got the 501 and it connected first time with no issues.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Server error can't load mail

For two days now icloud can't load my email due to server error. Why is this?

To all of you with the same problem as I do. - "no mail loading from icloud on my iMac, Macbook Pro," - i called Apple and there is some outtage for about 1% - I was told it might be maintenance, changing servers over to new ones, who knows? - etc. - hopefully it will be back up soon. - My iPhone seems to be back up and I can send and receive emails through my icloud.com account. - I use Mac Mail App on my iMac and laptop.
My mail has been down for about 4 hrs. now. . . . ever since I booted this morning. PST - SF.

SQLDeveloper error "Can't load AMD 64-bit .dll on a IA 32-bit platform"

Hi
I've installed SQL Developer.
It starts, but when I try to connect to the HR database I get the following error message:
An error was encountered performing the requested operation:
C:\oracleee\product\11.2.0\dbhome_1\BIN\ocijdbc11.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform
Vendor code 0I already have Oracle EE installed, and have installed JDeveloper today. Both are running with no problems.
SQLDeveloper, I initially downloaded without the JDK, but that didn't work, and reading the many replies to other people who had had the same problem (something about mscvr7.dll or some such), as per their exhortations I downloaded the SQLDeveloper that includes the JDK, which happens to be 32 bit (there is no 64 bit SQL Developer with JDK bundled with it). I'm running 64-bit W7.
Can anybody help me here? I don't have much of a clue when it comes to JDKs.
Many thanks,
Jason

>
Could you try to install JDK 64bit (not bundled)?
<<http://www.oracle.com/technetwork/java/javase/downloads/index.html>>
>
Hi,
is the problem that I don't have a 64-bit JDK? I thought it might be the other way round.
I think the following says I have a 64 bit java something, though is that the JRE, rather than the JDK?
C:\Users\J>echo %JAVA_HOME%
C:\Program Files (x86)\Java\jre7\bin
C:\Users\J>java -version
java version "1.7.0_04"
Java(TM) SE Runtime Environment (build 1.7.0_04-b22)
Java HotSpot(TM) 64-Bit Server VM (build 23.0-b21, mixed mode)
C:\Users\J>java -d32 -version
Error: This Java instance does not support a 32-bit JVM.
Please install the desired version.
C:\Users\J>java -d64 -version
java version "1.7.0_04"
Java(TM) SE Runtime Environment (build 1.7.0_04-b22)
Java HotSpot(TM) 64-Bit Server VM (build 23.0-b21, mixed mode)So, am I not running 64-bit? Maybe I need a 32-bit JDK...but then...SQLDeveloper was bundled with a JDK and there was only one option for that - 32bit!
Thanks,
Jason

Error: Can't load libJPlatin.so -(JNI Library)in SAP GUI for java 7.0 -AIX

Similar Messages

Maybe you are looking for