Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe

Hi
I have created a sample Fusion Web Application(ADF) and created a test.jsp in viewcontroller with few components. I have started the integrated weblogic server and started successfully, but when I run test.jsp it is giving me the below error
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe" (in directory "C:\Documents and Settings\chowdamr\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.jdeveloper\DefaultWorkspace"): CreateProcess error=267, The directory name is invalid.
Initially this page is working successfuly.
Please tell me whats the problem.
Edited by: 858782 on May 13, 2011 5:28 AM

There are some problems when JDev's system directory (e.g. the \system11.1.1.4.37.59.23 directory) is in a path that contains spaces (as it is in your case - C:\Documents and Settings\...). Move the system directory to a path without spaces and try again. The simplest way to move it is to start JDeveloper in a "single user" mode (use <tt>jdeveloper.exe -singleuser</tt>) which will create the system directory within JDev's home directory. Of course, if your JDeveloper is installed in a path containing spaces, it will not work either (for example, if JDev is in C:\Program Files\...).
Have a look here for a more sophisticated approach for moving the system directory to another location:
http://technology.amis.nl/blog/8387/change-the-jdeveloper-system-directory
Dimitar

Similar Messages

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

Configure: error: cannot run C compiled programs.

Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error
'configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details'
I have attached portion of the config.log
configure:3739: checking whether the C compiler works
configure:3761: gcc conftest.c >&5
configure:3765: $? = 0
configure:3813: result: yes
configure:3816: checking for C compiler default output file name
configure:3818: result: a.out
configure:3824: checking for suffix of executables
configure:3831: gcc -o conftest conftest.c >&5
configure:3835: $? = 0
configure:3857: result:
configure:3879: checking whether we are cross compiling
configure:3887: gcc -o conftest conftest.c >&5
In file included from conftest.c:11:
/usr/include/stdio.h:21:31: sys/feature_tests.h: No such file or directory
In file included from /usr/include/stdio.h:66,
from conftest.c:11:
/usr/include/iso/stdio_iso.h:90: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:208: error: syntax error before "fpos_t"
/usr/include/iso/stdio_iso.h:210: error: syntax error before '*' token
In file included from /usr/include/stdio.h:135,
from conftest.c:11:
/usr/include/iso/stdio_c99.h:54: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:54: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:56: error: redefinition of parameter '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:56: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:68: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:68: error: previous definition of '_RESTRICT_KYWD' was here
/usr/include/iso/stdio_c99.h:70: error: conflicting types for '_RESTRICT_KYWD'
/usr/include/iso/stdio_c99.h:70: error: previous definition of '_RESTRICT_KYWD' was here
configure:3891: $? = 1
configure:3898: ./conftest
./configure: line 3900: ./conftest: No such file or directory
configure:3902: $? = 127
configure:3909: error: in `/wireshark-1.6.7':
configure:3911: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details

934802 wrote:
Hi,
I am new to Solaris. I have installed Solaris 10 and compiled packages without any error.
I have tried to compile Wireshark 1.7.1 and it was exist indicating '/usr/include/sys/feature_tests.h no such file or directory'.
So I have download feature_tests.h file and uploaded it to the relevant location and run ./configure again.
Now I am not able to compile any package and it indicate error Where did you get this file?

OWB - Workflow- Cannot run program "/usr/bin/perl": CreateProcess error=2,

Hi All,
I am using OWB 11gR2 and I am getting "perl" location error after start workflow for any dimension or fact.
*Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
The log is below. I am using Windows 2008 R2 OS and 11gR2 DB. The perl path is set in the environment variables and I can run the perl.exe from command line.
Why OWB is looking for the Unix base path "/usr/bin/perl": is a question for me.
If anybody knows the issue please guide me.
Thanks
OUBIWF_D_DEVICE_ACTIVITY_TYPE                                        2012-07-04 16:57:37.0     4
Parameters
OUBIWF_D_DEVICE_ACTIVITY_TYPE:FILEMGR_PRE                              1          2012-07-04 16:57:38.0     2
Parameters
RPE-02229: The following debug information was collected:
RPE-02230: Debug Information: os.name = Windows Server 2008 R2
RPE-02230: Debug Information: os.version = 6.1
RPE-02230: Debug Information: os.arch = amd64
RPE-02230: Debug Information: user.name = INT-A-MDM-01$
RPE-02230: Debug Information: user.dir = C:\product\11.2.0\dbhome_3\owb\bin\win32
RPE-02230: Debug Information: argv.arg0 = /usr/bin/perl
RPE-02230: Debug Information: argv.arg1 = /spl/intbase/DB/tools/filemgr/splfilemgr.plx
RPE-02230: Debug Information: argv.arg2 = -l
RPE-02230: Debug Information: argv.arg3 = /spl/BIDevelopment/bi2400db
RPE-02230: Debug Information: argv.arg4 = -n
RPE-02230: Debug Information: argv.arg5 = D_DEVICE_ACTIVITY_TYPE_EXT.DAT
RPE-02230: Debug Information: argv.arg6 = -p
RPE-02230: Debug Information: argv.arg7 = 1
RPE-02230: Debug Information: argv.arg8 = -s
RPE-02230: Debug Information: argv.arg9 = S
RPE-02230: Debug Information: argv.stdin =
RPE-02230: Debug Information: USERPROFILE = C:\Windows\system32\config\systemprofile
RPE-02230: Debug Information: JAVAPATH = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: NODEID = 1
RPE-02230: Debug Information: IAS_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: SystemDrive = C:
RPE-02230: Debug Information: RTHOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: Path = C:\product\11.2.0\dbhome_3\bin;C:\product\11.2.0\dbhome_3\jdk6\jre\bin\client;C:\product\11.2.0\dbhome_3\jdk6\jre\bin;C:\product\11.2.0\dbhome_3\owb\bin\admin;C:\Windows\system32
RPE-02230: Debug Information: CONNECT_SPEC = 10.34.32.136:1521:MDM
RPE-02230: Debug Information: PROCESSOR_REVISION = 1a05
RPE-02230: Debug Information: OCM_ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERDOMAIN = WORKGROUP
RPE-02230: Debug Information: ALLUSERSPROFILE = C:\ProgramData
RPE-02230: Debug Information: TMP = C:\Windows\TEMP
RPE-02230: Debug Information: CommonProgramFiles = C:\Program Files\Common Files
RPE-02230: Debug Information: PROMPT = $P$G
RPE-02230: Debug Information: PROCESSOR_LEVEL = 6
RPE-02230: Debug Information: JVM_OPTIONS = -Xmx768M
RPE-02230: Debug Information: LOCALAPPDATA = C:\Windows\system32\config\systemprofile\AppData\Local
RPE-02230: Debug Information: COMPUTERNAME = INT-A-MDM-01
RPE-02230: Debug Information: SystemRoot = C:\Windows
RPE-02230: Debug Information: ORA_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERNAME = INT-A-MDM-01$
RPE-02230: Debug Information: APPDATA = C:\Windows\system32\config\systemprofile\AppData\Roaming
RPE-02230: Debug Information: ProgramData = C:\ProgramData
RPE-02230: Debug Information: PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
RPE-02230: Debug Information: ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: RTUSER = OWBSYS
RPE-02230: Debug Information: ProgramFiles(x86) = C:\Program Files (x86)
RPE-02230: Debug Information: TEMP = C:\Windows\TEMP
RPE-02230: Debug Information: OEM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramFiles = C:\Program Files
RPE-02230: Debug Information: JDK_HOME = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: OCM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramW6432 = C:\Program Files
RPE-02230: Debug Information: PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
RPE-02230: Debug Information: STARTUP_TYPE = -manual
RPE-02230: Debug Information: PROCESSOR_ARCHITECTURE = AMD64
RPE-02230: Debug Information: OS = Windows_NT
RPE-02230: Debug Information: FP_NO_HOST_CHECK = NO
RPE-02230: Debug Information: CommonProgramW6432 = C:\Program Files\Common Files
RPE-02230: Debug Information: ORACLE_SID = mdm
RPE-02230: Debug Information: DISCOVERER_ALLOW_DB_CONNECT_STRING = YES
RPE-02230: Debug Information: OWB_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: NUMBER_OF_PROCESSORS = 2
RPE-02230: Debug Information: PUBLIC = C:\Users\Public
RPE-02230: Debug Information: PSModulePath = C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
RPE-02230: Debug Information: CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
RPE-02230: Debug Information: ComSpec = C:\Windows\system32\cmd.exe
RPE-02235: The operating system has reported that it cannot execute the requested command. This may be because the command or the parameters are invalid, or that the command is shell command. Any result code return is specific to the operating system. Debug information has been produced.
Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
OUBIWF_D_DEVICE_ACTIVITY_TYPE:EMAIL_FILEMGR                              1          2012-07-04 16:57:40.0Parameters
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 8

Hi There
Am experiencing the same issue. Did you manage to resolve it, is so can you advice what the resolution is. Thanks
Regards,
Kayode

XSU Problem:Error-- Cannot map Unicode to Oracle character

Hi, I am using XSU to get the resultset from database(oracle 9.2.0.6.0) as XML.When I query data from some columns and get the XMLString, they give me error -"Cannot map Unicode to Oracle character". The database charset is "US7ASCII" .
One column is storing Chinese with ''US7ASCII".When xmlString Result contianer
the column,there is "oracle.xml.sql.OracleXMLSQLException: Cannot map Unicode to Oracle character".But If xmlString Result don't container that column,it run very good.
The program container these libs: ojdbc14.jar,xmlparserv2.jar,xdb.jar,nls_charset12.jar,xsu12.jar.
The program code:
public class OracleXmlParse {
public static void main(String[] args) {
try{
DriverManagerDataSource dataSource = new DriverManagerDataSource("oracle.jdbc.driver.OracleDriver",
                    "jdbc:oracle:thin:@168.1.1.136:1521:imis","ims","ims");
String selectSQL = "select AREA_CODE,AREA_NAME,REGION_CODE,AREA_NAME_CN from CDM_AREA";
OracleXMLQuery query = new OracleXMLQuery(conn,selectSQL);
query.setEncoding("UTF-8");
String str = query.getXMLString();
System.out.println(str);
conn.close();
}catch(SQLException e){
               e.printStackTrace();
Exception:
Exception in thread "main" oracle.xml.sql.OracleXMLSQLException: Cannot map Unicode to Oracle character.
     at oracle.xml.sql.core.OracleXMLConvert.getXML(OracleXMLConvert.java:1015)
     at oracle.xml.sql.query.OracleXMLQuery.getXMLString(OracleXMLQuery.java:267)
     at oracle.xml.sql.query.OracleXMLQuery.getXMLString(OracleXMLQuery.java:221)
     at oracle.xml.sql.query.OracleXMLQuery.getXMLString(OracleXMLQuery.java:198)
     at procedure.OracleXmlParse.main(OracleXmlParse.java:34)
The column that store chinese is AREA_NAME_CN .When "selectSQL " is equal to "select AREA_CODE,AREA_NAME,REGION_CODE from CDM_AREA",the program is ok.
Please help.
Message was edited by:
user542404
Message was edited by:
user542404

So, What is the solution ? Is there something I can do in my code ? My program gives the exception and stops. I am not even interested to fetch the data, which are giving this error.

Exception "Cannot run program" while using ProcessBuilder class

Hi Java-Folks,
I try to start a program within a Java application using the ProcessBuilder class. This is the first time I use ProcessBuilder so I do not have any deep knowledge of it. Here is a snippet of my code:
static void connectToHost(String Host) {
ProcessBuilder pb = new ProcessBuilder("connect.exe"), Host);
Map<String, String> env = pb.environment();
env.put("SHELLWIDTH", "64");
pb.directory(new File("C:\\MyProgram\\ExApp\\shell"));
try (
Process p = pb.start();
} catch (IOException ex) {
Logger.getLogger(ShellUtil.class.getName()).log(Level.SEVERE, null, ex);
}Using this method I get an IOException which says *"Cannot run program "connect.exe" (in directory "C:\MyProgram\ExApp\shell"): CreateProcess error=2, The system couldn't find the specified file"*
Does anybody have an idea why this is not working? I tried to start another application like "notepad.exe" and that works fine. So it seems related to the fact
that the program I want to start is only available in a certain directory and not via the PATH env-variable.
I would appreciate any help or hint :-)
Regards,
Lemmy

Okay I guess I misinterpreted the JavaDocs regarding the directory method. The exception message is a little bit confusing too, because it seems like Java tries to find the Application within the specified
working directory.
I tried to use the full path with the ProcessBuilder constructor and it looks like this variant is working. I still have some trouble with the application itself but I was able to start another program which is
not in the PATH var, using the full path to the executable.
Thanks for the help so far.
Bye
Lemmy

Cannot run program "keytool": java.io.IOException

Hi,
I would like to follow the procedure to change the master password
of glassfish server hosting APEX listener
using the change-master-password subcommand, but the utility keytool
is not found:
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> /opt/glassfish3/bin/asadmin
/opt/glassfish3/bin/asadmin
Use "exit" to exit and "help" for online help.
asadmin> change-master-password mydom01
Enter the current master password> changeit
Enter the new master password> changedit
Enter the new master password again> changedit
Cannot run program "keytool": java.io.IOException: error=2, No such file or directory
Command change-master-password failed.
asadmin>
Command multimode failed.
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> which java
/usr/bin/java
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config>
All of glassfish is running fine apart from this.
keytool could be found in /usr/java/latest/bin/keytool.
Do we need to have this in the path? There is no requirement in the
install guide for this, nor did the RPM installation adjust the system
path accordingly.
Hopefully someone can tell my how things ought to be regarding keytool?
Thanks, Tom

Hi Tom,
the procedure to change the master password of glassfish server hosting APEX listener... sounds more like a GlassFish-related topic to me. I guess you'd get the best answers for such questions in a GlassFish-related forum...
For what it's worth, I'll try my best anyway:
Cannot run program "keytool": java.io.IOException: error=2, No such file or directoryThis seems to be a pretty clear error message: keytool , which is probably used to manage the keys for GlassFish users, wasn't found. This means, you're either running on an OS that is not officially certified for GlassFish, or you GlassFish hasn't been configured properly.
You ran
glassfish@ahost:/opt/glassfish3/glassfish/domains/mydom01/config> which java
/usr/bin/java... which indicates you assume your GlassFish is running without JAVA_HOME being set. If that's true, I'd begin to setup you GlassFish properly starting with that parameter.
Anyway, you also found out that
keytool could be found in /usr/java/latest/bin/keytool.... which is not +/usr/bin+ and hence probably not in the global search path of the user on whose behalf your GlassFish is running. So, you could either create a link-set[*] for +/usr/bin/keytool+ to (finally) point to +/usr/java/latest/bin/keytool+, or you setup JAVA_HOME to be +/usr/java/latest+ .
[*] Note that depending on your OS there might be more than one stage of indirection, e.g. my Ubuntu has +/usr/bin/java+ pointing to +/etc/alternatives/java+ which is pointing to +/usr/lib/jvm/java-6-sun/jre/bin/java+ where +/usr/lib/jvm/java-6-sun/+ is pointing to the directory containing the actual JDK to be used. You'll probably find something like that on your system as well. My Ubuntu box has a link for +/usr/bin/keytool+, so I get that when running "which keytool".
Do we need to have this in the path? There is no requirement in the install guide for this, nor did the RPM installation adjust the system path accordingly.Again, this is not a GlassFish forum.
I hope my hints help you solve your problem. If they don't, please choose the appropriate forum for your next post on that topic. And I guess, giving some more information on your OS and how you manage your JDK (and which version you use) will help people there to help you.
Thanks,
Udo

Java.io.IOException: Cannot run program "ant"

Hi all,
I'm running a Job in Hudson.
I build this job from a Hudson Master Server but the job is built in a Hudson Linux Node.
This is the result:
Started by user builder
Building remotely on Linux-Node
Updating http://150.200.20.200:8000/mvtv_all/DESCOS/MVTVc_D2ph1/branches revision: 17-may-2013 16:01:46 depth:infinity ignoreExternals: false
At revision 529
Updating http://150.200.200.200:8000/mvtv_all/DESCOS/KaluModules/branches revision: 17-may-2013 16:01:46 depth:infinity ignoreExternals: false
At revision 529
no change for http://159.200.300.20:8000/mvtv_all/DESCOS/MVTVc_D2ph1/branches since the previous build
no change for http://159.230.300.20:8000/mvtv_all/DESCOS/KaluModules/branches since the previous build
No emails were triggered.
[bt] $ ant -file build.xml -DSUBSYSTEM=ALL -DTARGET=makeBuild -DCRLIST= -DOWNER= -DbuildTool.patch.release=$RELEASE -DbuildTool.system=$SYSTEM -DbuildTool.patch.type=$PATCH_TYPE -DbuildTool.subsystem=ALL -DbuildTool.buildRules=pkgBuild -DbuildTool.dynamicView=$WORKSPACE/ALL -DbuildTool.compilationRules=compile -DbuildTool.patch.name=$PATCH_NAME makeBuild
FATAL: command execution failed.Maybe you need to configure the job to choose one of your Ant installations?
java.io.IOException: Cannot run program "ant" (in directory "/hudson/buildTool/src/bt"): error=2, No existe el fichero o el directorio
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1029)
at hudson.Proc$LocalProc.<init>(Proc.java:192)
at hudson.Proc$LocalProc.<init>(Proc.java:164)
at hudson.Launcher$LocalLauncher.launch(Launcher.java:639)
at hudson.Launcher$ProcStarter.start(Launcher.java:274)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:794)
at hudson.Launcher$RemoteLaunchCallable.call(Launcher.java:768)
at hudson.remoting.UserRequest.perform(UserRequest.java:114)
at hudson.remoting.UserRequest.perform(UserRequest.java:48)
at hudson.remoting.Request$2.run(Request.java:283)
at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:471)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
at java.util.concurrent.FutureTask.run(FutureTask.java:166)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
at java.lang.Thread.run(Thread.java:722)
Caused by: java.io.IOException: error=2, No existe el fichero o el directorio
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:135)
at java.lang.ProcessImpl.start(ProcessImpl.java:130)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1021)
... 15 more
Do you know something about this issue?
Thanks and Regards

No, and this is not the Hudson forums either. But see this error?
FATAL: command execution failed.Maybe you need to configure the job to choose one of your Ant installations?Try posting that in Google and see what you get. That's basic misery solution research 101. Post the error in Google. 999/1000 times someone has already run into it before. Please learn from their experiences by reading through them.

ProcessBuilder: Cannot run program

Hello,
In my code I need to run a windows application. Through the Command Prompt I would type:
C:\>"C:\Documents and Settings\Simpatico\My Documents\Woerter Speichern Files\changeBackgroud" "C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\testimage.bmp"In Java I wrote:
ProcessBuilder pb = new ProcessBuilder("C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\changeBackground", C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files\\testimage.bmp);
          pb.directory(new File("C:\\Documents and Settings\\Simpatico\\My Documents\\Woerter Speichern Files"));
          try {
               pb.start();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();And I get:
java.io.IOException: Cannot run program "C:\Documents and Settings\Simpatico\My Documents\Woerter Speichern Files\changeBackground": CreateProcess error=2, The system cannot find the file specified
     at java.lang.ProcessBuilder.start(Unknown Source)The problem is with executing the application, changeBackground in the first place, and not the parameter passing.

simpatico_gabriele wrote:
1. They are not. Please qualify ur claim.All right, I will. Your code is like this:
ProcessBuilder pb = new ProcessBuilder("C:\\Documents and Setting...{code}
The string you pass as a parameter there starts with the letter C, not with a quote. You still don't believe it? Try this:
{code}System.out.println("C:\\Documents and Setting");{code}
Notice how what's printed out doesn't start with a quote?
It's really annoying how you ask for help and then flatly reject it when it's given. This is the last help I will be giving you.

Error while running Program YL_ADJUST_COMMITMENT

Error while running Program YL_ADJUST_COMMITMENT, i think it actually comes from FN8C business operation for single posting w
"Message" - No account refernce could be found - Error in update to Accounting - Distribution error -CoCd 601.
Please help

Resolved my self

Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.

Single Primary Site running SCCM 2012 SP1 with SQL 2008 SP3 CU14 on Windows Server 2008 SP1.
We are in process of upgrading to SCCM 2012 R2.
Ran the ConfigMgr 2012 R2 setup with the /TESTDBUPGRADE on SQL Server.
F:\SMSSETUP\BIN\X64\setup.exe /testdbupgrade
cm_bc1
Error: SQL Instance hosting an active site database, error cannot run Testdbupgrade on a SQL Instance which host an active site database.
We are using s-syscenter account which has SA rights on SQL and added as local admin.

You should run Testdbupgrade on a copy of your database (ie a backup) rather than the "live" database.
Note that you cannot upgrade a database once you have run Testdbupgrade on it.
See here for more information
http://technet.microsoft.com/en-us/library/jj865691.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

FXTrans Script runs on error: UJK_EXECUTION_EXCEPTION:Run program error

Dear Experts,
I found a couple of messages related to this topic but unfortunately no solution that fits for me. I have the following problem. In 7.0 we implemented a very simple prototype currency translation and it worked just fine. We migrated the appsets etc. to 7.5 SP4 and I was gonna run the currency translation but the script gives me the following error in the package as well as in the script logic tester:
RUN CURRENCY CONVERSION
EXCEPTION OCCURRED WHEN RUNNING PROGRAMS:
Error found in BPC
UJK_EXECUTION_EXCEPTION:Run program error, Message Number: ""
For that reason, the package of course runs on an error.
This is my FXTRANS-Script:
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
RATEENTITY = GLOBAL
*ENDRUN_PROGRAM
This is my Test-Script for the Checker:
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = V301
CURRENCY = EUR
TID_RA = 2011.JAN
OTHER = [ENTITY=S21001]
RATEENTITY = GLOBAL
*ENDRUN_PROGRAM
I am very sure that I maintained all needed dimensions and properties. I just dont understand why the system gives me such a weird error message. I'm desperate.
Thanks in advance,
Cora

Dear CoraBo
I hope you 've configured " Currency Conversion Business Rules" in main Financial App, as required.
In the meanwhile, as I could not find much details of error LOG report in your message, I suggest you to have some insight of possibility of error ("UJK_EXECUTION_EXEPTION:Run Program Error") in the following thread for your reference:
Currency Conversion
Hope this will help you, for some extent.
Regards
ukraghu

TopLink workbench won't run (can't find "~1\bin\javaw.exe" error)

Hello,
I'm having a tough time getting the TopLink WorkBench to run on Windows XP. I'm trying to run TopLink WorkBench 10g Release 3 (10.1.3.0.0) Build 060118. I've also installed Oracle Application Server 10g Release 3 (10.1.3.0.0) which is working fine (other than the Toplink part). I've managed to get EJB's deployed and access them through RMI and WS.
When I run "workbench.cmd" I get the error
Windows cannot find `~1\bin\javaw.exe"
If I manually remove the setenv.cmd call and cutout all the fixpath bits, Toplink Workbench comes up fine (as far as I can tell), but I cannot connect to my Oracle databases. When I try to connect, I get "The class oracle.jdbc.OracleDriver was not found".
I've been told this is because my J2EE 1.5 environment is incompatible with standalone Toplink Workbench. Is this true? I have both J2EE 1.5 SDK installed as well as J2EE 1.4 SDK but not amount of rearranging the system CLASSPATH seems to make everything work. (I've restarted Workbench to make sure the new env vars take effect when I change them)
Is there a step by step document on getting this to work?
Thanks in advance,
James Ewell
Seismic Micro technology
Houston, TX
PS - I am running WinXP 64-bit if that matters. The specific java bits are
W:\>java -version
java version "1.5.0_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_05-b05)
Java HotSpot(TM) Client VM (build 1.5.0_05-b05, mixed mode)

I was referred to this "step by step" link
http://download-west.oracle.com/docs/cd/B25221_04/web.1013/b13593/mw002.htm#CJADJEEE
which helps (it walks through the required edits in setenv.cmd). I still have the "can't find ~\bin\javaw.exe" problem though.
Perhaps this is a JRE 1.5 issue or a WinXP (64-bit) issue.
James Ewell

Why does C:\Program Files (x86)\Hewlett-Packard\IAM\Bin\asghost.exe run continually at almost 50% CPU use whenever Firefox is started

Every time I start Firefox 8.0 the following programs runs continuously, i.e. Why does C:\Program Files (x86)\Hewlett-Packard\IAM\Bin\asghost.exe run continually at almost 50% CPU use whenever Firefox is started?

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

C:\program files (x86)\hp\digital imaging\bin\background.exe

c:\program files (x86)\hp\digital imaging\bin\hpqkgrp.exe the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
I never had a problem before with scanning(as copying and printing are not a problem) and I can scan when I right click on the solution center but it does not allow for pdf format...I have tried everything it says on the even log and have unistalled the hp program and then re-installed the program with update and assistant to correct problem and I still cannot get it....PLEASE HELP!

Hello Quincy62301 ,
Welcome to the HP Forums.
I see that you are having some issues with the scanning due to an error code.
I suggest that we start off by running the HP Print and Scan Doctor. Please take a screen shot of any error codes or messages so that I can see exactly what you see.
Write me back and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe

Similar Messages

Maybe you are looking for