Error CDR-03111: Type Adapter load failure

Hi,
While viewing the version comparision of two version of same form getting the following error..
Message
CDR-03111: Type Adapter load failure
Cause
An error has occurred loading a type adapter class
to carry out this compare/merge operation.
Error: %0!s / %1!s
Action
Make sure that the Type Adapter classes
are available on the client machine.
I am not able to understand what action needs to be done & how.
Can any one explain it in details, so that I can able to view version comparision of two forms
Thanks,

Hi,
Infact i tried all this procedures but still my load getting failed.Replicated datasources also done source system restore.am getting the below error message.
Check Load from InfoSource
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Kindly suggest me.
Thanks

Similar Messages

Invalid Content Type Error in Receiver SOAP Adapter

Hello Experts,
Is there a solution for this problem?
I am getting the following error in one of my receiver SOAP adapters:
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:...:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML
I have checked the message I am sending to the receiver adapter and it is XML, ok. After checking this thread: Re: Error in soap receiver adapter and SAP note 856597 I used the TCPGateway program to check what the web service is answering to the adapter request and I found the problem is due to an authentication failure. The TEXT/HTML is an error page the SAP WebAS that hosts the webservice is sending out as response saying no login method succeeded.
However... The webservice URL and basic authentication information, the user and password, are configured correctly. I double checked it and I can also run the webservice using that information directly with wsnavigator on that WebAS.
Checking the request message I found out that the root problem is that the adapter is not sending out a basic authentication request as configured. It is actually sending a header with SAP SSO2 (single signon) ticket instead.
The most strange thing is that I configured another channel exactly the same way and it sends a basic authentication header as it should and works correctly.
So as a workaround I am using this new channel instead of the problematic one but why is the original sending SSO2 tickets? It is configured exactly the same as other channels. I think that SAP SSO authentication is not even supported by XI SOAP channels!!!???
Thanks in advance for your kind responses.
-Sam.

Shabarish:
Thanks for the link, but the real issue is not the request message (regarding your blog) but that the reply from the webservice is the standard HTML page informing no login module succeeded because the adapter is deciding completely on its own that it should use SAP single signon ticket instead of basic authentication as configured.
Volker:
I have performed full and delta cache refreshes to see if the channel performs as configured in the ID but it doesn't. It insists in trying to use SSO2 ticket instead of basic authentication.
I am sure this is an ugly bug in the WEBAS Java, more so because an identically configured channel does use the basic authentication as it should. Anyone knows about a SAP note regarding this? I have performed many searches on the support service but haven't retrieved anything significant.
Thanks for your help guys!
-Sam.

Package Load Failure message in VS 2005 and Error: WIJ 20002

After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
Package Load Failure
Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
"The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
The Java version I have is 6 and I checked the Universe is not locked.
Need help to identify the cause for both errors.

Try the following as posted on another forum:
Two solutions:
1. -Go in to the Tools menu in .NET, and choose Import and Export Settings.
- From the dialogue box, choose Reset All Settings and follow the steps
2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
Regards,
Jonathan

How do i fix 'error; texture load failure' problems for an online game?

i play chaoticgame.com online. it currently has no admin staff to help. the problem is that the website pages do not fully load. there is a function i can access that shows me all the errors im getting, most are- error; texture load failure and error; failed downloading....
this is a recent problem. also if i access the website via iphone using wifi from my home connection i get the same errors, so i dont know if this is a interent connection problem because ive had no other problems with websites.
i believe it has something to do with texture memory?

Hi Lorne.V.,
How exactly are you installing NI DAQmx on the target machines? Even if you include the DAQmx merge module in your build, you will still need to install DAQmx on the target machine separately.
Can you also confirm that the DAQmx.dll is installed in the same directory on both the development and deployment machines? And that you have the same version of DAQmx on both machines?
Regards,
Lindsey W. | Applications Engineer | National Instruments

Error #2124: Loaded file is an unknown type when loading any SWF file

Hi all,
We are using IBM WebSphere Application Server (WAS) 6.1 along with Apache web-server for hosting our Flash RIA application.
Our Flash RIA application used to be single monolitic SWF file and it worked OK for us.
But now there is a new need to load dynamically external SWF files into our main SWF file, but every time we try to load SWF file on this configuration IOErrorEvent is thrown with error text "Error #2124: Loaded file is an unknown type"
Simplest MXML application fails to load SWF file with this error, although external images are loading fine.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx">
 <fx:Script>
 <![CDATA[
 protected function swfloader1_ioErrorHandler(event:IOErrorEvent):void {
 mx.controls.Alert.show("SWF load failed " + event.text);
 ]]>
 </fx:Script>
 <mx:SWFLoader source="test.swf"
 ioError="swfloader1_ioErrorHandler(event)"/>
</s:Application>
We already tried to specify the MIME type for file extension ".swf" at IBM WebSphere 6.1 admin console, tried 2 values "application/x-shockwave-flash" and "application/swf" - did not solve the problem.

Hi JabbyPandaUA
I had the same problem and I could fix it by adding the following tags to my web.xml:
<mime-mapping>
 <extension>swf</extension>
 <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
try it and tell me, good luck!

BizTalk admin console error Provider load failure

Hi,
I am facing issue with BizTalk admin console, getting below error,
i thought it will be due to sql server or WMI so restarted sql services as well WMIS services but no luck. restarted Distributed transaction services as well as restarted machine but it did not solve.
TITLE: BizTalk Server Administration
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders&EvtChain=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors+%2cFailedLoadingGroupProviders
ADDITIONAL INFORMATION:
Failed to load Group [AMTROWBT13DV04\AMTROWBT13DEV:BizTalkMgmtDb] data providers. (Microsoft.BizTalk.Administration.SnapIn)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2013+R2&ProdVer=3.11.158.0&EvtSrc=Microsoft.BizTalk.Administration.SnapIn.Properties.Errors&EvtID=FailedLoadingGroupProviders
Provider load failure (System.Management)
after looking at event viewer i can see few more error messages,
Faulting application name: mmc.exe, version: 6.3.9600.16384, time stamp: 0x52158765
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532943a3
Exception code: 0xe0434352
Fault offset: 0x00011d4d
Faulting process id: 0x215c
Faulting application start time: 0x01d004a6e0c31506
Faulting application path: C:\windows\SysWOW64\mmc.exe
Faulting module path: C:\windows\SYSTEM32\KERNELBASE.dll
Report Id: 3d994be7-709f-11e4-80ee-00505689506c
Faulting package full name:
Faulting package-relative application ID:
Application: mmc.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Reflection.TargetInvocationException
Stack:
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.OnThreadException(System.Object, System.Threading.ThreadExceptionEventArgs)
at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
at System.Windows.Forms.Control.WndProcException(System.Exception)
at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.IntDestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.UnsafeNativeMethods.DestroyWindow(System.Runtime.InteropServices.HandleRef)
at System.Windows.Forms.NativeWindow.DestroyHandle()
at System.Windows.Forms.Control.DestroyHandle()
at System.Windows.Forms.Control.Dispose(Boolean)
at Microsoft.BizTalk.Administration.SnapIn.Forms.GroupHub.OperationsCtrl.Dispose(Boolean)
at System.ComponentModel.Component.Dispose()
at Microsoft.ManagementConsole.FormView.InternalShutdown()
at Microsoft.ManagementConsole.View.HandleShutdownRequest(Microsoft.ManagementConsole.Internal.IRequestStatus)
at Microsoft.ManagementConsole.View.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.ViewMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Internal.IMessageClient.ProcessRequest(Microsoft.ManagementConsole.Internal.Request)
at Microsoft.ManagementConsole.Executive.RequestStatus.BeginRequest(Microsoft.ManagementConsole.Internal.IMessageClient, Microsoft.ManagementConsole.Internal.RequestInfo)
at Microsoft.ManagementConsole.Executive.SnapInRequestOperation.ProcessRequest()
at Microsoft.ManagementConsole.Executive.Operation.OnThreadTransfer(Microsoft.ManagementConsole.Executive.SimpleOperationCallback)
at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[])
at System.Reflection.RuntimeMethodInfo.UnsafeInvoke(System.Object, System.Reflection.BindingFlags, System.Reflection.Binder, System.Object[], System.Globalization.CultureInfo)
at System.Delegate.DynamicInvokeImpl(System.Object[])
at Microsoft.ManagementConsole.Executive.DelegateMessage.OnExecute()
at Microsoft.ManagementConsole.Executive.Message.Execute()
at Microsoft.ManagementConsole.Executive.SnapInThread.DispatchPendingSnapInMessages()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnDataReadyAsync(System.Object, System.EventArgs)
at Microsoft.ManagementConsole.Executive.MmcThreadMessageWindow.WndProc(System.Windows.Forms.Message ByRef)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
at System.Windows.Forms.Application.Run()
at Microsoft.ManagementConsole.Internal.SnapInMessagePumpProxy.Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Internal.ISnapInMessagePumpProxy.Run()
at Microsoft.ManagementConsole.Executive.SnapInThread.OnThreadStart()
at System.Threading.ThreadHelper.ThreadStart_Context(System.Object)
at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
at System.Threading.ThreadHelper.ThreadStart()
does any one face similar issue if yes can you please help me to solve this?
Regards,
Amit
Regards, Amit More

here is log generated during configuration,
[2014-11-24 05:16:10:0572 Info Configuration Framework]Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:10:0588 Info BtsCfg] Configuring feature: WMI
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CBtsCfg::IsSelectedAnswer
[2014-11-24 05:16:10:0588 Info BtsCfg] Entering function: CWMI::Connect
[2014-11-24 05:16:10:0588 Info BtsCfg] Leaving function: CWMI::Connect
[2014-11-24 05:16:10:0603 Info BtsCfg] Entering function: CWMI::CreateGroup
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(438): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0791 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btscfg.cpp(1801): FAILED hr = 80041013
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:10:0791 Info BtsCfg] Unconfiguring feature: WMI
[2014-11-24 05:16:10:0791 Warning BtsCfg] BTS management server or DB names are not found in the registry.
[2014-11-24 05:16:10:0791 Info BtsCfg] Entering function: CWMI::StopHostInstance
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1553): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Entering function: CWMI::UnMapHost
[2014-11-24 05:16:10:0807 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1698): FAILED hr = 80041013
[2014-11-24 05:16:10:0807 Error BtsCfg] Provider load failure
[2014-11-24 05:16:10:0807 Info BtsCfg] Instantiating IBTSMsgBoxPerformance object
[2014-11-24 05:16:10:0869 Info BtsCfg] Calling IBTSMsgBoxPerformance::UninstallArtifacts
Exception in CounterManager.UninstallArtifacts when uninstalling the perf counter instances. The exception details are:
Source of exception: System
Message: Cannot delete Performance Category because this category is not registered or is a system category.
Stack trace: at System.Diagnostics.PerformanceCounterCategory.Delete(String categoryName)
at Microsoft.BizTalk.MsgBoxPerfCounters.MgmtDbAccessEntity.UninstallInstances(Boolean regularUninstall)
at Microsoft.BizTalk.MsgBoxPerfCounters.CounterManager.UninstallArtifacts(Boolean regularUninstall, String logFileName)
[2014-11-24 05:16:11:0166 Info BtsCfg] Stopping Tracing
[2014-11-24 05:16:11:0166 Info BtsCfg] Entering function: CWMI::DeleteServer
[2014-11-24 05:16:11:0182 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1353): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Entering function: CWMI::UnConfigureGroup
[2014-11-24 05:16:11:0197 Error BtsCfg] d:\bt\127854\private\source\setup\btscfg\btswmi.cpp(1076): FAILED hr = 80041013
[2014-11-24 05:16:11:0197 Error BtsCfg] Provider load failure
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::UnConfigureFeature
[2014-11-24 05:16:11:0197 Info BtsCfg] Leaving function: CBtsCfg::ConfigureFeature
[2014-11-24 05:16:11:0213 Warning Configuration Framework]Feature failed to configure: WMI.
[2014-11-24 05:16:11:0400 Info Configuration Framework]Configuration Summaries:
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [Group] Failed to configure with error message [Provider load failure
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BizTalk Runtime] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Tools] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Error Configuration Framework]Feature: [BAM Portal] Failed to configure with error message [Feature is skipped due to dependent feature (Group) failed to configure correctly.]
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: SSOServer,Engine Configuration Enabled: no
Sub UI: yes Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: WMI Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: Engine,BTSCfg Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: RulesEngine Configuration Enabled: yes
Sub UI: no Configured: yes
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MOT Configuration Enabled: yes
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMTools Configuration Enabled: no
Sub UI: yes Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: BAMPortal Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]
Feature: MsEDIAS2 Configuration Enabled: no
Sub UI: no Configured: no
[2014-11-24 05:16:11:0400 Info Configuration Framework]Leaving function ConfigureFeatures().
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function WizardStep_NextStepChanged.
[2014-11-24 05:16:11:0416 Info Configuration Framework]Entering function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0447 Info Configuration Framework]Leaving function ConfigWizardResult_Load.
[2014-11-24 05:16:11:0478 Info Configuration Framework]Leaving function WizardStep_NextStepChanged.
[2014-11-24 05:16:14:0416 Info Configuration Framework]Displaying information notification to user. Message: <Exception Message="Provider load failure
" Source="" HelpID="" />
Regards, Amit More

SQL*Loader-128: Error in Concurrent program of type SQL* Loader

Hi,
Am facing below error with CP of SQL*Loader execution format. Both Control and data files are placed under bin directory under CUSTOM TOP.
CP doesnt have any parameter. I believe we dont need to pass login details to a CP. So how can we default the DB Login to SQL Loader in CP?
Appreciate your quick help.
SQL*Loader-128: unable to begin a session
ORA-01017: invalid username/password; logon denied
SQL*Loader: Release 10.1.0.5.0 - Production on Wed Dec 14 02:03:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL*Loader-128: unable to begin a session
ORA-01017: invalid username/password; logon denied
Program exited with status 1
Concurrent Manager encountered an error while running SQL*Loader for your concurrent request 1040692.
Review your concurrent request log file for more detailed information.
Here the Control and Data file for the same.
Control file:
LOAD DATA
INFILE 'XXX_Customer_Master.dat'
BADFILE 'Customer_bad.bad'
DISCARDFILE 'Customer_discard.bsc'
APPEND
INTO TABLE XXX_AR_CUSTOMERS_INT FIELDS TERMINATED BY "|" OPTIONALLY ENCLOSED BY '"'
ORIG_SYSTEM_PARENT_REF ,
ORIG_SYSTEM_CUSTOMER_REF,
CUSTOMER_NAME,
CUSTOMER_NAME_PHONETIC,
COUNTRY,
STATE,
CITY,
ADDRESS1,
POSTAL_CODE,
RECORD_NUMBER          SEQUENCE(MAX, 1),
CREATED_BY                CONSTANT -1,
CREATION_DATE           CONSTANT SYSDATE,
CUSTOMER_TYPE          CONSTANT 'R',
INSERT_UPDATE_FLAG           CONSTANT 'I',
LAST_UPDATE_DATE           CONSTANT SYSDATE,
LAST_UPDATE_LOGIN          CONSTANT -1,
LAST_UPDATED_BY          CONSTANT -1,
ORG_ID               CONSTANT 102,
PRIMARY_SITE_USE_FLAG     CONSTANT 'Y',
SITE_USE_CODE          CONSTANT 'BILL_TO'
*Data file:*
'XXX_Customer_Master.dat'
50|792086|Test Customer |Test Customer |759843055|Australia|VIC|MELBOURNE|"Level 4 457 St Kilda Road"|3004
59|792232|Test Customer |Test Customer |751756404|Australia|ACT|Tuggeranong|PO Box 1035|2901

Do we have to create soft link like we create for host program directory ?How to Register a Host Concurrent Program in Applications [ID 156636.1]
How To Create A Custom Concurrent Program With Host Method and Pass Parameters To The Shell Script [ID 266268.1]
How To Setup A Custom Concurrent Host Program [ID 147455.1]
Also, please see (How to Use 9i or 10g Features in SQL*Loader for Apps? [ID 423035.1]).
Thanks,
Hussein

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Package Load Failure VS 2008 Architect & 11.1.0.6.20

I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
Package Load Failure
Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
Any suggestions on getting this to work?

I started visual studio with logging turned on. Here are the results from the log file:
<entry>
<record>60</record>
<time>2008/01/18 19:14:09.974</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>61</record>
<time>2008/01/18 19:14:11.026</time>
<type>Warning</type>
<source>Microsoft Visual Studio Appid Stub</source>
<description>CheckPackageSignature failed; invalid Package Load Key</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>62</record>
<time>2008/01/18 19:14:11.056</time>
<type>Information</type>
<source>Microsoft Visual Studio</source>
<description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
</entry>
<entry>
<record>63</record>
<time>2008/01/18 19:14:16.273</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>
<entry>
<record>64</record>
<time>2008/01/18 19:14:16.313</time>
<type>Error</type>
<source>Microsoft Visual Studio</source>
<description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
<guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
<hr>80004005 - E_FAIL</hr>
</entry>

Error: Missing SRV record at DNS server - [Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]

in an attempt to transfer FSMO roles to the 2012r2 DC the first thing I ran was dcdiag /e /c /v and after correcting some minor errors, I came upon this one in the DNS portion where a SRV record is missing and I have no idea how to fix/remove this. there's
only two DCs, 200.5 and 200.6 where the former is a Hyper-V VM running 2012r2 and the latter is a physical 2003r2 machine. I was able to successfully raise the levels to 2003 and join the 2012r2 DC. this missing SRV record does not look fatal and only warrants
a warning from dcdiag, however I would like to fix this so there's no trouble down the road. I've tried ipconfig /registerdns, but no dice. here is the message I'm concerned about:
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
the bottom portion of the DNS section that contains this message is in the RReg section and is as follows:
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Matching CNAME record found at DNS server 192.168.200.5:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
CM-DC1-HV-NYC01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.6:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
CM-DC1-HV-NYC01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adapters

Hi Ace Fekay, thank you for your help. I hope you're still with me despite my lack of responding. I needed time to move the VPN server from the DC to a separate VM and then following your instructions to disable WINS Proxy and IP routing. Some of the delay
was when I had to restart the 2003r2 server after disabling those two items since that cause DNS queries to the Internet to go unresolved with only the 2012r2 server. That's been corrected, but running dcdiag /c /e /v still gives some DNS problems. Here's
the latest run of that...
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
Starting test: DNS
See DNS test in enterprise tests section for results
......................... CM-DC-NY01 passed test DNS
See DNS test in enterprise tests section for results
......................... CM-DC1-NY01 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : cmedia
Starting test: CheckSDRefDom
......................... cmedia passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... cmedia passed test CrossRefValidation
Running enterprise tests on : cmedia.local
Starting test: DNS
Test results for domain controllers:
DC: cm-dc-NY01.cmedia.local
Domain: cmedia.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS Microsoft(R) Windows(R) Server 2003, Standard Edition (Service Pack level: 2.0) is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000001] HP NC373i Multifunction Gigabit Server Adapter:
MAC address is 00:00:00:00:00:00
IP Address is static
IP address: 192.168.200.6
DNS servers:
192.168.200.6 (cm-dc-NY01.cmedia.local.) [Valid]
192.168.200.5 (CM-DC1-NY01) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: b.root-servers.net. IP: 2001:500:84::b [Invalid (unreachable)]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: c.root-servers.net. IP: 2001:500:2::c [Invalid (unreachable)]
Name: d.root-servers.net. IP: 199.7.91.13 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 198.32.64.12 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: cmedia.local.
Delegated domain name: _msdcs.cmedia.local.
DNS server: cm-dc-NY01.cmedia.local. IP:192.168.200.6 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000001] HP NC373i Multifunction Gigabit Server Adapter:
Matching CNAME record found at DNS server 192.168.200.6:
406b42db-de80-4d11-bc18-c68074007a76._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
cm-dc-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.pdc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.5:
406b42db-de80-4d11-bc18-c68074007a76._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
cm-dc-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.pdc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adapters
DC: CM-DC1-NY01.cmedia.local
Domain: cmedia.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS Microsoft Windows Server 2012 Standard (Service Pack level: 0.0) is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000010] Microsoft Hyper-V Network Adapter:
MAC address is 00:00:00:00:00:00
IP Address is static
IP address: 192.168.200.5, 0000::0000:0000:0000:0000
DNS servers:
192.168.200.5 (CM-DC1-NY01) [Valid]
192.168.200.6 (cm-dc-NY01.cmedia.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 128.9.0.107 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: b.root-servers.net. IP: 2001:500:84::b [Invalid (unreachable)]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: c.root-servers.net. IP: 2001:500:2::c [Invalid (unreachable)]
Name: d.root-servers.net. IP: 128.8.10.90 [Invalid (unreachable)]
Name: d.root-servers.net. IP: 199.7.91.13 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: f.root-servers.net. IP: 2001:500:2f::f [Invalid (unreachable)]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: i.root-servers.net. IP: 2001:7fe::53 [Invalid (unreachable)]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 198.32.64.12 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: l.root-servers.net. IP: 2001:500:3::42 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 2001:dc3::35 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: cmedia.local.
Delegated domain name: _msdcs.cmedia.local.
DNS server: cm-dc-NY01.cmedia.local. IP:192.168.200.6 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Matching CNAME record found at DNS server 192.168.200.5:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
CM-DC1-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.6:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
CM-DC1-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adapters
Summary of test results for DNS servers used by the above domain controllers:
DNS server: 198.32.64.12 (l.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 198.32.64.12 [Err
or details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:1::803f:235 [Error details: 1460 (Type: Win32 - Description: This operation ret
urned because the timeout period expired.)]
DNS server: 2001:500:2::c (c.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2::c [Error details: 1460 (Type: Win32 - Description: This operation returned b
ecause the timeout period expired.)]
DNS server: 2001:500:2d::d (d.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2d::d [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:500:84::b (b.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:84::b [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:503:ba3e::2:30 [Error details: 1460 (Type: Win32 - Description: This operation retu
rned because the timeout period expired.)]
DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:503:c27::2:30 [Error details: 1460 (Type: Win32 - Description: This operation retur
ned because the timeout period expired.)]
DNS server: 2001:7fd::1 (k.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:7fd::1 [Error details: 1460 (Type: Win32 - Description: This operation returned bec
ause the timeout period expired.)]
DNS server: 128.8.10.90 (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.8.10.90 [Erro
r details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 128.9.0.107 (b.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.9.0.107 [Erro
r details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2f::f (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2f::f [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:500:3::42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:3::42 [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:7fe::53 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:7fe::53 [Error details: 1460 (Type: Win32 - Description: This operation returned be
cause the timeout period expired.)]
DNS server: 2001:dc3::35 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:dc3::35 [Error details: 1460 (Type: Win32 - Description: This operation returned be
cause the timeout period expired.)]
DNS server: 128.63.2.53 (h.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.112.36.4 (g.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.168.200.5 (CM-DC1-NY01)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS server: 192.168.200.6 (cm-dc-NY01.cmedia.local.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.cmedia.local. is operational on IP 192.168.200.6
DNS server: 192.203.230.10 (e.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.228.79.201 (b.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.33.4.12 (c.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.36.148.17 (i.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.5.5.241 (f.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.58.128.30 (j.root-servers.net.)
All tests passed on this DNS server
DNS server: 193.0.14.129 (k.root-servers.net.)
All tests passed on this DNS server
DNS server: 198.41.0.4 (a.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.83.42 (l.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.91.13 (d.root-servers.net.)
All tests passed on this DNS server
DNS server: 202.12.27.33 (m.root-servers.net.)
All tests passed on this DNS server
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: cmedia.local
cm-dc-NY01 PASS PASS PASS PASS PASS WARN n/a
CM-DC1-NY01 PASS PASS PASS PASS PASS WARN n/a
......................... cmedia.local passed test DNS
Starting test: LocatorCheck
GC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
PDC Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
Time Server Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
Preferred Time Server Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
KDC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
......................... cmedia.local passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
PDC Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
Time Server Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
Preferred Time Server Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
KDC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
......................... cmedia.local passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope provided by the command line arguments
provided.
......................... cmedia.local passed test Intersite

The custm error page is not getting loaded in TomCat 5.0

Hi all,
I am working on a JSF web application deployed in Tomcat 5.0.I was trying to redirect 404 and 500 error pages to custom error pages.But the error pages are not getting loaded and i am getting normal Tocat 404 status page.
I am giving the web.xml entry for the error page defenition.
<error-page>
 <error-code>404</error-code>
 <location>/faces/displayErrorpage.jsp</location>
 </error-page>
 <error-page>
 <error-code>500</error-code>
 <location>/faces/SessionExpirepage.jsp</location>
 </error-page>
 <error-page>
 <exception-type>java.lang.Throwable</exception-type>
 <location>/faces/displayErrorpage.jsp</location>
 </error-page>
Please help me out to solve this problem.Its urgent.I will be greatful for any kind of help.
Note: The same application working fine,ie,the error page is getting loaded while deploying WAS 6.0.
Jeevan Edakkunnath.

That's a specification version. I was asking for the implementation and version. Is it the Sun reference implementation (Sun JSF RI)? If so, which build?
It works flawlessly here on the latest build of Sun JSF RI 1.1, the 1.1_02. You can get the latest build at [http://javaserverfaces.dev.java.net]. I was using Tomcat 6.0.14 by the way, it might make difference.
Does it work if you use plain vanilla JSP files and do not pass the request through the FacesServlet? I recall some bugs related to it, but I am not sure anymore if it is related to the JSF implementation or application server used.

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

Error in Mail Sender Adapter

Hi all,
without any obvious reason i'm suddenly getting an error in the runtime workbench at the Communication Channel Monitoring:
exception caught during processing mail message; java.io.IOException: unexpected greeting response; read * BYE Connection refused
I already restarted the j2ee engine, but with no success.
Can anybody please help me?
Points will be rewarded!

Thank you for the tip with the Log Viewer. I discovered there an interesting error:
SLD start failure, profile parameter ObjectManager.BufferInstances must be set to FALSE in J2EE cluster environment. Change the SLD profile and start the application again.
Is it possible that the SLD is down and causes my error?
Because in the Adapter-Monitor i get an similar error for the JPR-Adapter (what for is this Adapter?):
SLD access SLD host:port = xxyyzz:12345
Error getting JPR configuration from SLD. Exception: entityNotFound
No access to get JPR configuration

How to resolve "Internal error: ABAP Report cannot be loaded" error

Hi All,
I am new to SAP.Please help me out from this problem.
When I am trying to debug BSP page, in debugging mode it shows "Internal error: ABAP Report cannot be loaded" error and then dumps.
In transaction ST22 it shows this dump something like this
Runtime Errors         MESSAGE_TYPE_X
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
    1 FUNCTION AC_SYSTEM_FLUSH .
    2 *"----
    3 ""Lokale Schnittstelle:
    4 *" IMPORTING
    5 *"     VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL
    6 *" EXCEPTIONS
    7 *"      CNTL_SYSTEM_ERROR
    8 *"      CNTL_ERROR
    9 *"----
   10   data: sysubrc like sy-subrc.
   11
   12   CALL FUNCTION 'AC_FLUSH_CALL'
   13        EXPORTING
   14             SYSTEM_FLUSH = 'X'
   15             CALLED_BY_SYSTEM = CALLED_BY_SYSTEM
   16        IMPORTING
   17             MESSAGE_NR   = sysubrc
   18             MESSAGE_TEXT = SY-MSGLI.
   19
   20   sy-subrc = sysubrc.
   21
   22   CASE SY-SUBRC.
   23     WHEN 0.
   24     WHEN 1.
   25 *     system_error
   26       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR.
   27     WHEN 2.
   28 *     method_call_error
>>>>>       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   30     WHEN 3.
   31 *     property_set_error
   32       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   33     WHEN 4.
   34 *     property_get_error
   35       MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR.
   36     WHEN OTHERS.
   37       RAISE CNTL_ERROR.
   38   ENDCASE.
   39
   40 ENDFUNCTION.
Thanks in advance
Sunil Choudhury

Hi Sunil,
The reason for this could be anything, anyways look up for an OSS note with the error message first.
As a workaround, you can try to use the classic debugger instead of the new ABAP debugger and see if it works.
You should be logged into SAP via SAP GUI when you are debugging BSP.
Regards
Chen

Error in Reciever RFC Adapter

Hi All,
While working with JDBCXIRFC, the only error with Reciever RFC Adapter is as
follows.
ZBAPICUSTOMER_DETAILS: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declaration(2)
In SXMB_MONI, the messages are queued up.
How to debug this error?
Regards
Pavan

1. Map all the mandatory fields..
I have mapped all the mandatory fields. If i enter same kind of values in the same fields of BAPI manually (in se37), the table gets updated.
how you can say that data is getting into the right tables...when you are sending the same data.....may be the data is old only..
Perform the Message Mapping and Interface Mapping test in IR only...
3. Kindly check the Sender_MM Mapping once more...If it is fine...reactivate and Update the cache..
Its fine and reactivated and even updated cache.
Now one doubt....
In Message mapping, the sender mesage type is as follows.
sender_mt 1:1
->Row element 1:unbounded
> zkunnr element xsd:string 1: unbounded
> zname1 element xsd:string 1: unbounded
> zstras element xsd:string 1: unbounded
> zadrnr element xsd:string 1: unbounded
> ztelf1 element xsd:string 1: unbounded
I have mapped ROW with ZBAPI_DETAILS.
the root of sender message type SENDER_MT is left as it is....
Is there anything need to be done (mapped) with this root of sender message type?
No i don't think so, what i can get from your approach is that you want to receive n similar type of records in a Message and want 2 create n different messages for each record from source structure.. 
With this status, i have tested the Test Configuration in Integration Directory. Still getting same error message as follows...
Kindly let me know the name of BAPI.
Perform the Message Mapping and Interface Mapping test in IR only...
java.lang.NullPointerException thrown during application mapping com/sap/xi/tf/_sender_mm_:
Regards,

Error CDR-03111: Type Adapter load failure

Similar Messages

Maybe you are looking for