Error Code 10 (Device manager) NI-CAN driver 2.5.2

Hi,
I am using the PCMCIA-CAN/2 series 2 card to communicate with an Aerovironment ABC150 charger and get the Error Code 10 in the device manager when I tried to install the driver.
Windows XP
Dell Latitude D520
Driver version 2.5.2
Previously the system had worked fine until we installed a USB 3G GSM modem. The Max software no longer recognised the CAN card. Since, I have installed the 2.5.2 version of the software and reinstalled XP on the machine. I have checked for IRQ conflicts and eventually removed the USB GSM software and hardware. After reinstalling XP, I tried to install the driver without installing the USB modem. I have downloaded the patch as for 2.3 versions and before.
When installing the driver from the 'Found new hardware wizard' I was not able to point at the system32/drivers location for the nicanpkw.sys file as it reported that there was no compatible software, nor by looking at any of the other locations. Instead I had to manually select it form the list of available drivers.
It is possible the Dell has been damaged as the original PCMCIA GSM card stopped working after the machine was knocked. I have tried other PCMCIA GSM cards and they work fine. I have also tried to use the PCMCIA-CAN2 (s2) card in another machine and that works also.
Thanks in advance,
Cam
nicanErr.txt
[OSINFO_SECTION]
OS=Microsoft Windows XP Workstation
Service_Pack=Service Pack 1 (Build 2600)
[DRIVER_VERSION_SECTION]
NICAN.DLL_VERSION=2.5.0f6
NICANFRM.DLL_VERSION=2.5.0f6
DRIVERS\NICANPK.DLL_VERSION=2.5.1f0
NICANPU.DLL_VERSION=2.5.0f6
NICANTSK.DLL_VERSION=2.5.0f6
NICANCFQ.DLL_VERSION=2.5.0f0
NCVI.DLL_VERSION=2.5.1.12289
NICAN_S1.NFW_VERSION=2050100
NICAN_S2.NFW_VERSION=2050100
[CURRENT_SECTION]
Section_Index=0
[INDEX_0]
Local_Time=
Err_Status=
Function=

Hi,
I have seen such wiered things when i had the legacy USB support enabled on a DELL notebook. Try to find this property in your BIOS and disable it and besides check wether or not your BIOS has a configuration property for PCMCIA/cardbus and try to enable pcmcia support (16 bit). Thats because the CAN board needs his own IRQ and cannot share interrupts like other cardbus compatible devices can.
Let us know if that helps.
DirkW

Similar Messages

Adobe application manager getting error code : A12E6 please what can i do ?

adobe application manager getting error code : A12E6 please what can i do ?

Anass63113494 what Adobe software or service are you attempting to install? Also which operating system are you using?

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

In my laptop internal bluetooth is disabled by the windows frm device manager, hw can I enable it ?

I am using hp probook 4530s comes with windows 7 home premium. In my laptop internal bluetooth is disabled by the windows from device manager, how can I enable it ? Please help...... The error is: Windows has stopped this device because it has reported problems. (Code 43)

I too am faced with the same problem. What I have done. 1) Installed latest firmware2) Installed lated Wifi adapter driver.3) Installed HP Connection manager4) Installed HP Support Assistant5) Uninstalled, Removed aand Deleted current Generic Bluetooth driver and reinstalled.6) Managed the Adapter settings to Enable Bluetooth.7) Searched the whole insterwebs for a fix that works for me and found nothing.8) Found a gun range that will allow me to use this laptop as a target. Please save this poor laptop from being a target at a gun range. HP FIX THIS PROBLEM PLEASE!

What is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

what is error code 3194 and how can i past this for i can update my ipod to 5.0.1, what is error code 3194 and how can i past this for i can update my ipod to 5.0.1

This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
Above from:
http://support.apple.com/kb/TS3694

Lack of sound after Window 7 (64) installation into iMac OX 10.6.7. Tried to install driver from Snow Lepard disc (Cirrus 64).Wizard installed driver. No sound, Device Manager indicated that "driver is not installed" but also that the"device is working"

I don't know how to proceed. I didn't have sound after installing Windows 7 inot iMac OX 10.6.7 (64bit) After unsuccessful attempt to upgrade the driver from the BootCamp file, I deleted the driver from the Sound and Game controlled hoping that I would allow me to automatically install the correct driver from Boot camp.
Now the Sound Video Game controller disappeared from the Device Manager
How can I find out which is the correct sound driver for my computer (The Speaker Properties only say:WIndows)?
How can I install it without seing the Sound and Game controller in the Device Manager?

When you say "manually download", you mean from the BootCamp File on Snow Leopard, or from the Internet.
My additional problem is that the "Sound and Video Game Controller" disappeared from the Device Manager when I removed the previous driver. I don't find the place where I can reistall the new driver.

Video controller error in device manager - Satellite Pro 6000

This old laptop, has an error in device manager (video controller ? vga compatible). Anything that you try to open takes for ever and seems to scroll open from top of page! Help me please.

Hi
I dont know which OS is preinstalled on your unit but please download the latest display driver and install it.
Toshiba download page is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

TS3694 My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means!

My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it! So Frutrated!

Also...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.

My iTunes won't launch. It will give and error code 13014. How can I fix this?

My iTunes won't launch. It will give and error code 13014. How can I fix this?

Hi tuzas2,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some applicable information below for you:
iPhone and iPod touch: An unknown error (13014), (13136), or (13213) may occur after updating to iTunes 8.0.1 or later
Solution 1
Make sure you have the latest version of iTunes installed.
Solution 2
Quit and reopen iTunes. If the issue continues, then restart your computer.
Solution 3
Quit iTunes, temporarily disable the anti-virus security software on your computer, then reopen iTunes and try to sync your device. If iTunes successfully syncs your iPhone or iPod touch, consult the anti-virus software vendor.
Solution 4
Turn off Genius in iTunes in the Genius sidebar (choose View > Hide Genius Sidebar).
I hope this information helps ....
Have a great day!
- Judy

Every time I turn on itunes I get an error that says iTunes was installed properly. When I try to uninstall it goes through the motions, but at the end (10-15 minutes later) it says it can't uninstall and gives me an error code of 2330. Can anybody help?

Everytime I turn on iTunes it say it wasn't installed properly and can't burn CD's. However all my music is there for me to listen to on my iPod Nano.
I want to unistall iTunes and it allows me to go through the process until about 2% is waiting for uninstall and then I get an error message that says it couldn't complete the uninstall and gives me an error code of 2330.
Can anybody please help me. iTunes wants to charge $19.
Thank you.

ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me

I am unable to update, uninstall, or reinstall iTunes on my laptop. Windows 7 Ultimate 32 bits. Error code is 2330. Can somebody please help me?

I am unable to update, uninstall, or reinstall iTunes on my laptop. Everything was working fine until recently when there was an update available for iTunes, and when I tried to update this, I got the message, "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. Error code is 2330." Can somebody please help me?
System configuration:
Windows 7 Ultimate 32 bits.
Version: 6.1.7601 Service Pack 1 Build 7601
System Directory: C:\Windows\system32
RAM: 1.00 GB.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I recently uninstalled and the download I tunes again. I am not getting a message when I try to add new download tunes to my shuffle. "Disc cannot be found"; Error Code (.53). What can I do to fix?

I updated my Shuffle software and after that could no longer add tunes from the ITunes file to my shuffle. I get messages that say the disc cannot be found and an error code (.53). I can download new tunes to ITunes on my computer but cannot then copy them to my Shuffle. Any suggestions? Damned updates!!!

Well my first suggestion would be to return the PC and buy a new Mac instead... but that aside
When you say you moved your iTunes library over how exactly did you do that? Typically I'd suggest that you download a clean version of iTunes from online, and then move over just the music files. Not any of the additional library relates files that are found in the iTunes folder. Yes you'll lose your playlists and song counts, but there are worse things in life.

I am unable to install the most recent version of i tunes. I am getting an error code 2721. What can I do to update my i tunes?

i am unable to install the most recent version of i tunes. I am getting an error code 2721. What can I do to update my i tunes?

Hello Veronica,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

I can't update my creative cloud for desktop pc. It appears an error code 001. What can I do ?

I can't update my creative cloud for desktop pc. It appears an error code 001. What can I do ?

Code 1 discussion https://forums.adobe.com/thread/1434528

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

Error Code 10 (Device manager) NI-CAN driver 2.5.2

Similar Messages

Maybe you are looking for