Error compling Solaris(TM) OE Implementation Win32 API
Hi,
I have downloaded above API from sun web site. I am not able to compile it. Do I have to use forte to complie it ? I am using gnu gcc /g++ 2.95.3 on sparc solaris 8.
I am able to compile without any flags. Means no CFLAGS, no OPTIONS and no LIB64_FLAGS. with this flags it is giving me error for each .c file :
gcc : language CC not recognised.
gcc : xxxxx.c linker input file unused since linking is no done.
And if I use 'release/libwin32.so' that is supplied with download and includes that into my program, it gives me error :
/Win32_Library/include/wintypes.h:134 declaration does not declare anyhing
/Win32_Library/include/wintypes.h:169 parse error before 'char'
/Win32_Library/include/wintypes.h:240 declaration does not declare anyhing
/Win32_Library/include/wintypes.h:241 declaration does not declare anyhing
And wintypes.h :
134: typedef unsigned long DWORD;
135: typedef unsigned long long DWORD64;
168: typedef unsigned int SID;
169: typedef SID *PSID;
239:typedef BOOL *LPBOOL;
240: typedef CHAR TCHAR;
240: typedef CHAR _TCHAR;
And it is also giving me too many warnings for widec.h, wchar_iso.h and getwc.
thaks in advanced.
Hi,
Yes, you need to use the Forte C/C++ compiler (Formerly known as Sun's Workshop compiler) to compile the library. The Solaris(TM) OE Implementation of Win32 API library has never been tested with gcc compiler.
It is also mentioned in the README file under the root level folder for this library that this version of library has been compiled by the Sun WorkShop 5.0 98/12/15 C on SunOS Solaris 8. One should use the cc compiler "Sun WorkShop 5.0 98/12/15 C 5.0" or higher version to compile this library.
Thanks!
Similar Messages
-
Where is Solaris OE Implementation for Win32 API Version 1.0.2.?
the link on page http://soldc.sun.com/ntmigration/tools/jscoretool.html is broken.
I search and found with no results.
can anyone help ? or send a copy to my email box: [email protected]
thanks a lot.>
Try again for olaris[tm] OE Analyzer for C/C++ Source
Code at
http://soldc.sun.com/ntmigration/tools/jscoretool.html
It has a new version now as 1.1.
Also the Solaris OE Implementation for Win32 APIs
also has a new version at
http://soldc.sun.com/ntmigration/nttech/win32emulation
.html
Enjoy!The above link is broken. Can anyone please mail me the valid working link at [email protected]
Would really appreciate your help,
Thanks and Regards,
Sanjay -
How to migrate Win32 API QueueUserAPC on Solaris?
Hi,
I am trying to migrate Win32 API QueueUserAPC to Solaris. On Win32, it queues asynchrounous calls to a queue and runs under a specific thread context. Is there any equivalent call or implementation on Solaris?
Thanks,
Abhi.An excellent question.
One that might best be discussed in a forum where database people hang out, rather than a forum where one reports documentation issues. -
I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.
Nevermind I fixed it. Thank you.
-
What to do if message: [Win32 API error 126 ("Dasangegebene Modul wurde nicht gefunden") when calling ::LoadLibrary from getFunction] apears
What to do if message: [Win32 API error 126 ("Dasangegebene Modul wurde nicht gefunden") when calling ::LoadLibrary from getFunction] apears
-
When I export from LR5.3 I get an error message Win32 API error . However the export seems to work.
The message is Win32 API error 2 ("The system cannot find the file specified") when calling ShellExecuteExW from AgWorkplace.shellExecute. However the export works. What is happening and how do I get rid of the error message?
Near the bottom of the Export Daialog, in the "Post-Processing" section make sure that the "After Export" box is not empty (which is invalid and causes the export operation to trip up). Use the drop-down to select a valid choice such as "Do Nothing".
-
3.3 Bug: Win32 API Error 2 - Please help
Wondering if anyone may be able to help with the following error message:
"An internal error has occured: Win32 API error 2 ("The system cannot find the file specified") When calling ShellExecuteExW from AgWorkspace.shellExecute".
The wonderfully unhelpful persons at the helpline said they could not help me but indicated If I reload the version 3.3 in a different location the problem would go away since some plug-in from v1.4 had infected the new install.
I have no custom add-ins/plug-ins, everything is default.
I followed these instructions, however still have the same error. I removed then re-installed 3.3 on another drive away from C:\Progfiles......
Any suggestions?Sorry F. McLion, I could have provided the following additional information:
v1.4 lightroom owned, operating without issue, installed in default location
C:\... drive
v3.3 trial downloaded, installed default location, export operating without
issue
v1.4 launched to compare, export working fine
v3.3 launched, export results in error message; determined that export actually
worked, just resulted in the error message
un-installed v3.3 per phone support (manager)
re-installed v3.3 on F:\ drive from copy downloaded on F:\... drive. No change.
Odly after I removed then re-installed v3.3, the pictures I was working
on appeared in the re-installed instance with the most current changes - I would
suspect a clean un-install would have removed any semblence of work done prior
to removing (at least pointers to modified files). Since not, this means the
un-install did not truely un-install, it simply removed some files but also left
some remnents.
Microsoft XP Home edition V 2002 Service Pack 3
Dell Dimension 8400 P4 3.00 Ghz 3.00GB ram
Hope this helps.
John -
Error message win32 API error2 when calling ShellExecuteErW from AgWorkspace.shellExecute
after the command Exporting I get the message: Internal failure: win32 API error2 calling ShellExecuteErW from AgWorkspace.shellExecute. System is only exporting Thumnails.
System is windows8, 64bit Lightroom 5.2 (newest version)At the bottom of the import dialog is a popup marked Post-processing. It's probably currently empty. Set it to Do Nothing and try the export again.
-
Win32 API 1.1.1 compilation problems
We don't (alas) use Sun's compilers here, so I've
tried to compile the Win32 emulation library, version
1.1.1, using gcc 3.3.2. It yields the warnings and
outright errors listed below. I think it's a little
appalling that Sun didn't at least try this
themselves; it would give them some clues as to what
kinds of problems their own compilers aren't catching,
beyond the effect of getting them to notice and fix
these particular problems.
Glenn
gcc -I../include -D__EXTENSIONS__ -c Files.c -o release/Files.o
Files.c: In function `GetFileAttributesEx':
Files.c:745: warning: right shift count >= width of type
gcc -I../include -D__EXTENSIONS__ -c NamedPipe.c -o release/NamedPipe.o
NamedPipe.c: In function `NamedPipeBroadcast':
NamedPipe.c:185: warning: passing arg 3 of `pthread_create' from incompatible pointer type
gcc -I../include -D__EXTENSIONS__ -c ThreadFuncs.c -o release/ThreadFuncs.o
ThreadFuncs.c: In function `GetCurrentThread':
ThreadFuncs.c:134: error: incompatible type for argument 1 of `memset'
ThreadFuncs.c:135: error: incompatible type for argument 1 of `memset'
*** Error code 1 (ignored)
gcc -I../include -D__EXTENSIONS__ -c WSASockets.c -o release/WSASockets.o
WSASockets.c: In function `WSASendTo':
WSASockets.c:158: warning: passing arg 3 of `pthread_create' from incompatible pointer type
WSASockets.c: In function `WSARecvFrom':
WSASockets.c:216: warning: passing arg 3 of `pthread_create' from incompatible pointer type
WSASockets.c: In function `WSAEventSelect':
WSASockets.c:247: warning: passing arg 3 of `pthread_create' from incompatible pointer type
gcc -I../include -D__EXTENSIONS__ -c mutex.c -o release/mutex.o
mutex.c: In function `CreateMutex':
mutex.c:47: error: incompatible types in assignment
*** Error code 1 (ignored)
gcc -I../include -D__EXTENSIONS__ -c time.c -o release/time.o
time.c: In function `LocalFileTimeToFileTime':
time.c:369: warning: integer constant is too large for "long" type
time.c:375: warning: integer constant is too large for "long" type
time.c:376: warning: integer constant is too large for "long" type
time.c: In function `SetTimeZoneInformation':
time.c:752: warning: comparison between pointer and integer
time.c:780: warning: comparison between pointer and integer
time.c: In function `UnixTimeToFileTime':
time.c:993: warning: integer constant is too large for "long" type
time.c: In function `FileTimeToUnixTime':
time.c:1019: warning: integer constant is too large for "long" type
time.c:1023: warning: integer constant is too large for "long" type
time.c: In function `bValidateFileTimeRange':
time.c:1051: warning: integer constant is too large for "long" type
time.c:1054: warning: integer constant is too large for "long" type
time.c:1055: warning: integer constant is too large for "long" type
gcc -I../include -D__EXTENSIONS__ -c virtual.c -o release/virtual.o
virtual.c: In function `VirtualFree':
virtual.c:511: warning: comparison between pointer and integer
virtual.c: In function `VirtualAlloc':
virtual.c:746: warning: comparison between pointer and integer
virtual.c:746: warning: comparison between pointer and integer
virtual.c: In function `VirtualProtect':
virtual.c:873: warning: comparison between pointer and integer
virtual.c:873: warning: comparison between pointer and integer
gcc -I../include -D__EXTENSIONS__ -c sysinfo.c -o release/sysinfo.o
sysinfo.c:548:28: warning: unknown escape sequence '\-'The Solaris(TM) OE Implementation for Win32 API Version 1.0 has been compiled by the WorkShop Compilers 5.0 98/12/15 C 5.0 at SUN.
All the source files have ".c" extension which mean you can not use the "CC"/C++ compiler to compile it. You must use the C compiler "Sun WorkShop 6 update 1 C 5.2" instead of C++ compiler "Sun WorkShop 6 update 1 C++ 5.2" to compile this package.
Hope this will help.
Thanks!
Amjad -
Hi,
I have just downloaded the "Win32 API Version 1.0 " and I am trying to compile it under the
Solaris 2.6 and Forte 6.1/C++5.2/. I am facing some strange problems like
socklen_t in Files.h not defined and so on. I don't know which version of Solaris
and C++ compiler is supported.
Thanks you for your help
DimitarThe Solaris(TM) OE Implementation for Win32 API Version 1.0 has been compiled by the WorkShop Compilers 5.0 98/12/15 C 5.0 at SUN.
All the source files have ".c" extension which mean you can not use the "CC"/C++ compiler to compile it. You must use the C compiler "Sun WorkShop 6 update 1 C 5.2" instead of C++ compiler "Sun WorkShop 6 update 1 C++ 5.2" to compile this package.
Hope this will help.
Thanks!
Amjad -
LabVIEW call Win32 API DLL function from third party
Hi everyone,
I'm trying to build a LabVIEW 2010 interface on 32-bit Window XP system to configurate and communicate to an Anglient laser head through its USB expansion box. I contacted the vendor and they shared a win32 API with some dll files. I started with a function called "A55292Find", but the CLF node always pop up error 1097.I checked the MSDN to get the corresponding LabVIEW data type for CLF.
My question is: Do I need to initialize those arguments? (How can I know the values of them if initialization is needed?)
Could anyone help me figure out what's the problem?
Here is what I have from API documents about this function:
The A55292Find function returns lists of handles and board types for all the 55292 USB
Expansion Modules connected to the system.
A55292RC __cdecl A55292Find(
HANDLE hBoxes[], // List of handles for the boxes found. (as Unsigned 32-bit integer numeric)
BOARDTYPE PortABrdType[], // List of board types for slot A boards (as Unsigned 16-bit integer numeric)
BOARDTYPE PortBBrdType[], // List of board types for slot B boards (as Unsigned 16-bit integer numeric)
WORD *spMaxBoxes); // dimension for all of the passed arrays. (as Unsigned 16-bit integer array data pointer)
// (function return type as Unsigned 32-bit integer numeric)
Parameters
HBoxes[] Array that will receive the list of HANDLES for all the 55292 boxes connected.
PortABrdType[] An array that will receive Slot ‘A’ board type information for each 55292 box.
PortBBrdType[] An array that will receive Slot ‘B’ board type information for each 55292 box.
spMxBoxes Passes the maximum number of values that can be held in hBoxes, PortABrdType, and PortBBoardType arrays to the A55292Find routine and returns the actual number of boxes found
The return value will be one of the following A55292RC return codes:
Value Meaning
A55292_NO_ERROR No error
A55292_TIMEOUT Timeout accessing a shared memory
Remarks
This routine must be called to obtain handles and board type information used in calling all the other routines. If there are significantly more array elements than boxes, the routine will take longer to complete.
These are the definitions:
typedef DWORD A55292RC; enum{A55292_NO_ERROR, A55292_HANDLE_ERROR,...}
typeder WORD BOARDTYPE; enum{A55292_PCAL_BOARD, A55292_NO_BOARD, ...}
Thanks a lot,
Kang
Solved!
Go to Solution.
Attachments:
call A55292Find.vi 10 KBnkang11 wrote:
Hi Mr. Kalbermatter,
As you told me, I should try to use the defined enumeration words as control and indicator.
For the previous CLF node, it successfully returned the hardware configuration (I have only connected a board at slot A):
But I really want to see a string return as "A55292_PCAL_BOARD" which is defined by "typedef WORD BOARDTYPE; enumeration {...}; Does that mean I need to change the data type or do something like "converter"? Or initialize the array first, then convert it to string type?
Right now, I'm trying to open the laser card by using "A55292PcalOpen(HANDLE hDev, SLOTSELECT SlotSelector);" function which requires to use the enumeration constants from " typedef WORD SLOTSELECT; enum {A55292_PORT_A, A55292_PORT_B};" but I'm confused to shot an constant control to a new CLF node.
Since almost all of the arguments in dll function are typedefined as WORD, short and struct et al, I hope you could give me some hints on it.
Thank you very much sincerely!
Kang
Depending on the actual C implementation you can simply create a LabVIEW enum with the according item names or use a ring control instead. Teh enum requires the numeric values of the items to be in consecutive order without any gaps in between. This is a given if the C definition never assigns a specific number to the item. If the C enum is not consecutive you need to go with a ring control instead.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
Win32 API to get cluster List from domain
Hi ,
we are using NetServerEnum API to retrive the list of cluster from domain. But it failed with error 2127 on windows 2008 server and the cluster /list command also failed with same error.
But if we pass domain name to cluster .exe then it works.
So is there any win32 API other than NetserverEnum which will give the list of clusters in a domain.Hi,
can you also use powershell here?
Get-Cluster -domain yourdomainFQDN.com
This will give you all failover cluster in the specified DNS domain.
Hope that helps.
Regards
Ramazan
Ramazan Can [MVP Cluster] http://ramazancan.wordpress.com/ -
Kill RT task frontpanel RED-X versus WIN32-API
I have a LabVIEW task compiled to EXE which is downloaded to a remote processor; the front panel remains open locally.
I want to kill that task and re-download it. This works the way I want if I use the local mouse to click the RED-X kill box on the upper right corner of the local front panel for the remote task... The panel disappears AND the remote task stops executing.
The problem is that when I use the WIN32-API to try and kill the local front panel for the remote task I never get the remote task killed. Some WIN32-API calls such as sending EndTask via USER32.DLL to the local panel's window ID cause the local panel to close but the remote task keeps running and is not aborted. Sending a WM_Close to the local panel's window ID involves the operator because it produces a LabVIEW dialog asking me whether I "want to close all RT tasks or not"
What message do I send to the window, or what system call do I envoke to get the same result as that simple local mouse click on the RED-X kill box on the upper right corner of the local front panel for the remote task?
Thanks, JerryHello.
Normally a Real-Time task does not require a front panel so closing the Front Panel that you have opened remotely does not necessarily cause the VI to stop running, it merely disconnects the front panel connection to the VI.
In order to achieve the same resul, you can use an Invoke Node to close another VI.
To do this you will need to
follow the steps outlined below.
Open a blank VI and place an Open VI Reference on the block diagram.
Create
a control to the "VI Path" input of the Open VI Reference. On the front
panel you will need to browse to the VI you want stopped.
Wire an Invoke Node to the Open VI Reference and set the Invoke Node to "Abort VI."
Wire a Close Reference to the Invoke Node.
Wire a General Error Handler to the Close Reference.
Open the VI that you want to stop. Make sure it is running and then run the vi you just created. This will stop the first VI.
Hope this helps!
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/ -
Error while invoking a public PL/SQL API in EBIZ from Sync BPEL process
Hi,
SOA Suite: 11.1.1.3
I am getting the following error when I am invoking a public API in EBIZ from Oracle via a BPEL process. I am supplying the username/password via binding properties (as mentioned in other posts). Can someone point out that is the exact cause for this error please?
SEVERE: AbstractWebServiceBindingComponent.dispatchRequest Unable to dispatch request to http://<myserver>:8006/webservices/SOAProvider/plsql/hz_party_v2pub/ due to exceptionjavax.xml.ws.soap.SOAPF
aultException: Error occured while service was processing.
at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:874)
at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:707)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226)
at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97)
at oracle.integration.platform.blocks.soap.AbstractWebServiceBindingComponent.dispatchRequest(AbstractWebServiceBindingComponent.java:449)
at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.processOutboundMessage(WebServiceExternalBindingComponent.java:184)
at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.sendSOAPMessage(WebServiceExternalBindingComponent.java:634)
at oracle.integration.platform.blocks.soap.WebServiceExternalBindingComponent.request(WebServiceExternalBindingComponent.java:520)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:71)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy204.request(Unknown Source)
at oracle.fabric.CubeServiceEngine.requestToMesh(CubeServiceEngine.java:704)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:246)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:935)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.handleNormalInvoke(BPELInvokeWMP.java:440)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:182)
at com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform(BaseBPELActivityWMP.java:140)
at com.collaxa.cube.engine.CubeEngine._performActivity(CubeEngine.java:2675)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:2558)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1256)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:73)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:188)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:285)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4607)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:828)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:111)
at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:147)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean.syncCreateAndInvoke(BPELEngineBean.java:103)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy193.syncCreateAndInvoke(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.syncCreateAndInvoke(BPELEngineBean_51369e_ICubeEngineLocalBeanImpl.java:575)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:528)
at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:482)
at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:156)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.request(CubeDeliveryBean.java:600)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy190.request(Unknown Source)
at com.collaxa.cube.engine.ejb.impl.bpel.BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.request(BPELDeliveryBean_5k948i_ICubeDeliveryLocalBeanImpl.java:325)
at oracle.fabric.CubeServiceEngine.request(CubeServiceEngine.java:290)
at oracle.integration.platform.blocks.mesh.SynchronousMessageHandler.doRequest(SynchronousMessageHandler.java:139)
at oracle.integration.platform.blocks.mesh.MessageRouter.request(MessageRouter.java:179)
at oracle.integration.platform.blocks.mesh.MeshImpl.request(MeshImpl.java:144)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:296)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:177)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:144)
at oracle.integration.platform.metrics.PhaseEventAspect.invoke(PhaseEventAspect.java:59)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:166)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy204.request(Unknown Source)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.doMessageProcessing(WebServiceEntryBindingComponent.java:1155)
at oracle.integration.platform.blocks.soap.WebServiceEntryBindingComponent.processIncomingMessage(WebServiceEntryBindingComponent.java:767)
at oracle.integration.platform.blocks.soap.FabricProvider.processMessage(FabricProvider.java:113)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:1119)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:873)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:553)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:202)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:166)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:384)
at oracle.integration.platform.blocks.soap.FabricProviderServlet.doPost(FabricProviderServlet.java:444)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Nov 3, 2010 2:32:08 PM com.collaxa.cube.CubeLogger error
SEVERE: <WSInvocationManager::invoke> got FabricInvocationException
oracle.fabric.common.FabricInvocationException: javax.xml.ws.soap.SOAPFaultException: Error occured while service was processing.
Thanks,
DineshHi James,
Thanks for the quick reply.
We've tried to call that web service from an HTML designed in Visual Studios with the same username and password and its working fine.
But on the BPEL console, we are getting the error as mentioned.
Also if you can tell me how to set the user name and password in the header of the parter link.I could not find how to do it.
Thanks,
Saurabh -
when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers
Maybe you are looking for
-
I'd like to restore my 'signature' below my reply or message to look like this: John Bliss anywhere anywhere town Anytime anywhere Instead it now looks like this: John Bliss anywhere anywhere town Anytime anywhere It used to be ( until 3 days ago) li
-
Display issues between Pro and reader
Greetings, My colleague and I are having issues getting a form we created to display as designed in reader. The editable pdf displays as designed in Pro. When we open it up in reader and begin to type in a field, the text displays in an extremely sma
-
Material prices showing 0 is mm60
Dear sir / me dam I am creating material, material prices showing 0.00 is mm60, I am check display in MM03 showing price, please provide the answer
-
What is the best Apple notebook for video editing and pro music creation?
What is the best Apple notebook for video editing and pro music creation? I know I could opt for the most expensive and probably get what I want that way, but I´m not made of money, so what are your suggestions for minimum criteria and which would yo
-
Error: Gaps in Smart Objects imported from Illustrator
Hi, I would like to report an error in Photoshop CS6 (the latest patches have been installed). I've only recently purchased CS6 and have never posted in this forum before. Apologies in advance if this isn't the correct procedure for reporting errors.