Error connecting Domains: Invalid parameter,tdom_link contains NULL

Hi,
I'm trying to connect two Domains DOM1 and DOM2. DOM1 is running under Tuxedo8
in a RedHat Linux 7.2. The remote Domain is running in a former Tuxedo Version,
probably 6.5.
When booting I get the next error:
LIBGWT_CAT:1242: ERROR: Invalid parameter, tdom_link contains NULL pointer
The description in the documentation is
Description
GWTDOMAIN detects an internal error, or possible data corruption when it does
a network open call.
Action
Contact your BEA Customer Support.
Can anyone give any clue?
Thanks in advance, bye!
Yol.

Do you have an idea in which section I can look for the mistake? I have other domains
running correctly configured in this config file, and everything seems to be ok
for this domain too.
Thanks in advance
Yol.
"mike" <[email protected]> wrote:
>
this error is in dmconfig.txt
"Yolanda Arroyo" <[email protected]> wrote:
Hi,
I'm trying to connect two Domains DOM1 and DOM2. DOM1 is running under
Tuxedo8
in a RedHat Linux 7.2. The remote Domain is running in a former Tuxedo
Version,
probably 6.5.
When booting I get the next error:
LIBGWT_CAT:1242: ERROR: Invalid parameter, tdom_link contains NULL pointer
The description in the documentation is
Description
GWTDOMAIN detects an internal error, or possible data corruption when
it does
a network open call.
Action
Contact your BEA Customer Support.
Can anyone give any clue?
Thanks in advance, bye!
Yol.

Similar Messages

Report erroring out with 'Invalid parameter requested' in Siebel.

Hello -
I have 9 parameters on a template, excluding the two delivered out-of-the-box by siebel to enter the Language and Locale. Recently, if i enter a language value of 'ESP' ( or any other language value), it errors out with 'Invalid parameters requested' error. On reviewing the OC4j log file, i noticed that the language parameter ('ESP') is actually being applied to another parameter in my template that accespts only 'Yes/No' boolean values. This occurs randomly, there is no particular pattern to this.
Log snippet:
[020711_233324269][][STATEMENT] WARNING: Old RTF version detected, nested table disabled
[020711_233324297][][STATEMENT] expression: rpad(trim(EndDate),10)
[020711_233324315][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324319][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[020711_233324322][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324325][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324329][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[020711_233324332][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324335][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324338][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324341][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324344][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324348][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324351][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324354][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica-Oblique
[020711_233324357][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324360][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324364][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324367][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324370][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324373][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324376][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324379][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324382][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324385][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324433][oracle.apps.xdo.template.rtf.RTF2XSLParser][STATEMENT] Time spent: 6917
[020711_233324437][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica closed.
[020711_233324440][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Bold closed.
[020711_233324442][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Times-Roman closed.
[020711_233324445][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Courier closed.
[020711_233324447][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Oblique closed.
[020711_233324454][][STATEMENT] Setting data definition:ShowDiscount type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324457][][STATEMENT] Setting data definition:ShowOperatingLeaseProposal type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324459][][STATEMENT] Setting data definition:ShowHeaderFooter type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324462][][STATEMENT] Setting data definition:ShowProductLongDescription type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324465][][STATEMENT] Setting data definition:ShowListPrice type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324468][][STATEMENT] Setting data definition:ShowProductDescriptionPage type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324471][][STATEMENT] Setting data definition:ShowOneGEpage type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324473][][STATEMENT] Setting data definition:AltBudgetQuote type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324476][][STATEMENT] Setting data definition:RSorBP type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324479][][STATEMENT] Set ReportRequest's parameters key[0], ShowDiscount
[020711_233324481][][STATEMENT] Set ReportRequest's parameters value[0], [Ljava.lang.String;@18bf083
[020711_233324484][][STATEMENT] Set ReportRequest's parameters key[1], ShowProductLongDescription
[020711_233324486][][STATEMENT] Set ReportRequest's parameters value[1], [Ljava.lang.String;@5b3488
[020711_233324489][][STATEMENT] Set ReportRequest's parameters key[2], ShowProductDescriptionPage
[020711_233324491][][STATEMENT] Set ReportRequest's parameters value[2], [Ljava.lang.String;@1d60031
[020711_233324494][][STATEMENT] Set ReportRequest's parameters key[3], ShowOperatingLeaseProposal
[020711_233324497][][STATEMENT] Set ReportRequest's parameters value[3], [Ljava.lang.String;@a6a14b
[020711_233324499][][STATEMENT] Set ReportRequest's parameters key[4], AltBudgetQuote
[020711_233324502][][STATEMENT] Set ReportRequest's parameters value[4], [Ljava.lang.String;@1a75098
[020711_233324504][][STATEMENT] Set ReportRequest's parameters key[5], ShowOneGEpage
[020711_233324507][][STATEMENT] Set ReportRequest's parameters value[5], [Ljava.lang.String;@19c449f
[020711_233324509][][STATEMENT] Set ReportRequest's parameters key[6], ShowHeaderFooter
[020711_233324512][][STATEMENT] Set ReportRequest's parameters value[6], [Ljava.lang.String;@5d53c3
[020711_233324515][][STATEMENT] Set ReportRequest's parameters key[7], RSorBP
[020711_233324519][][STATEMENT] Set ReportRequest's parameters value[7], [Ljava.lang.String;@1262d8c
[020711_233324522][][STATEMENT] Set ReportRequest's parameters key[8], ShowListPrice
[020711_233324524][][STATEMENT] Set ReportRequest's parameters value[8], [Ljava.lang.String;@17864c4
[020711_233324527][][STATEMENT] Default Report OutputFormat = html
[020711_233324531][][STATEMENT] Illegal parameter value: AltBudgetQuote=ESP
[020711_233324536][java.lang.String][EXCEPTION] oracle.apps.xdo.servlet.data.DataException: Invalid parameters requested.
     at oracle.apps.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
     at oracle.apps.xdo.servlet.data.DataException.fillInStackTrace(DataException.java:127)
     at java.lang.Throwable.<init>(Throwable.java:196)
     at java.lang.Exception.<init>(Exception.java:41)
     at oracle.apps.xdo.servlet.ReportException.<init>(ReportException.java:36)
Any help to resolve this is highly appreciated

Any solution to this yet user2078933 ? What is the solution to this problem?
[STATEMENT] Illegal parameter value: <everything-perfect-here>
This is a transient issue with no apparant pattern. I can't believe that none of you have got any solution to this in so many years.
Somebody respond please, it's been years!

Utl_http does not give a very helpful error message: Invalid Parameter

I'm writing PL/SQL to consume a web service on another server. In trying to execute this snippet of code, I receive this error:
ORA-28783: Invalid parameter
ORA-06512: at "SYS.UTL_HTTP", line 1023
ORA-06512: at line 29
Line 29 is the utl_http.begin_request statement shown below.
I'm baffled as to what the error message might point to and I'm looking from any insight others may have. The message is so generic as to be useless and I can't find any examples of others receiving this particular error when executing begin_request.
Please note that this is an SSL/HTTPS connection. If I remove the "S" and just use HTTP, I receive an appropriate message from the web server. (A tiny web page telling me I should be using the https version and not the http version.) I can also go to, for example, Google or CNN's web sites and pull back data but those are not SSL connections. It is the SSL part that isn't working.
This isn't a SOAP error since I never get a chance to create my SOAP message and place it in the request.
I've tried changing the POST to GET and the HTTP version to 1.0 just to see if the error message changes and it does not.
My wallet file is in place on the database server, placed in an accessible folder by
the DBAs. This code can see the wallet, I believe, because if I change the wallet
path to something non-existent, I receive a different error. I imported the web site certificate for the site I'm connecting to and placed that in the wallet. I've been able to cause "certificate chain" errors with empty wallets, so I think the certificate is correct.
I used SOAP-UI (www.soapui.org) and was quickly able to connect to the web server and begin having a "SOAP conversation", so I know the web services I'm connecting to are working. It is something in the database itself that is preventing this from executing - the wallet, a setting in the database, something like that. But what?
=======================================================
utl_http.set_response_error_check(enable=>true);
utl_http.set_detailed_excp_support(enable => TRUE);
utl_http.set_follow_redirect(5);
utl_http.set_wallet('file:/...', '*******');
--**** SET THE URL FOR THIS REQUEST *******
http_req:= utl_http.begin_request(
'https://....' --location of web services I want to use
, 'POST'
, utl_http.HTTP_VERSION_1_1
=======================================================

You seemrd to have ruled out most potential problems I could think of.
The error message just states that there is something wrong with the parameters that you use. Only point I can currently think of is a problem with the returned value.
How did you declare you http_req variable? Does it use the utl_http.req type?

Error: Invalid Parameter when trying to extend volume in Windows Server 2012

From VMware, I added space to a Hard Drive to a Windows Server 2012 VM. I then went into the WinServer console, and opened Disk Management. I did a rescan on the disk. It found the extra space. I right mouse click on the Disk,
and choose Extend Volume, choose the available space, and then an error returned of 'Invalid Parameter'.
In Disk Manager, the new larger space is assigned, but Windows Explorer and everything else only recognizes the original smaller size.
EventManager shows Event ID 265: A pointer device did not report a valid unit of angular measurement. Event ID 257: A pointer device reported a bad angular physical range. Event ID 258: A pointer device reported a bad angular logical range.
Anyone have a solution for this problem?

Hi,
Please try to use the command line utility diskpart to extend the drive.
1. Open a command prompt
2. Type in diskpart
3. Type list volume
4. Type select volume #
5. Type extend [size=n] [disk=n]
For more detailed information about diskpart, please see:
DiskPart Command-Line Options
http://technet.microsoft.com/en-us/library/cc766465(v=ws.10).aspx
You could refer to the article below to troubleshoot the issue:
Windows Server 2008 drive doesn’t expand correctly after extending in VMware VI client
http://consultingblogs.emc.com/greggrobertson/archive/2010/05/27/windows-server-2008-drive-doesn-t-expand-correctly-after-extending-in-vmware-vi-client.aspx
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error Parameter WI_ID contains an invalid value in webdynpro abap

Hi Experts,
i am working with webdynpro abap and using work flow in my component , here i am getting error and the error is
Parameter WI_ID contains an invalid value .
its showing the error in windows parameter : wi_id and the wi_id is type sww_wiid
and the same parameter i am using in application parameter .
can u suggest me how to use this parameter wi_id in window parameter and application parameter and what the type should be for wi_id parameter.and what the value should be for application parameter wi_id.
her i am giving the complete error details.
please give me the requried information if u porvided screen that will be very useful
The following error text was processed in the system RD1 : Parameter WI_ID contains an invalid value .
The error occurred on the application server S0164SAPDEV2_RD1_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: HANDLESTART of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/BP6P95H8W6B71I7VVRPR==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_IF_VIEW=====CP
Method: DISPLAY_TOPLEVEL_COMPONENT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Thanks & Regards.
khanna

Hi Nawal Kishor Mittal,
thanks for the reply,
i have given the application parameter wi_id with type string also but in 120 client (development) is working fine. when i test in 130 client( testing) its going to dump.
what should be given to application value i given parameter wi_id and what the value should be there.
waiting for reply.
Thanks & Regards.
Khanna.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

WDDynamicRFCExecuteException: Error connecting using JCO.Client: null

Hi
This is a common problem,I have seen many threads , but following them did not solve my problem.
I have the JCOs tested successful from WD Admin. When I create a sample WDJ application with RFC model and deploy it to the server, I get
Exception:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecution: Error connecting using JCO.Client: null.
I have checked my binding , I have only one input parameter and the code is
      wdComponentAPI.getMessageManager().reportSuccess("Inside wdInit in Component ctrller");
      Z_Plm44_Obsoleteimpactanalysis_Input input = new Z_Plm44_Obsoleteimpactanalysis_Input();
     wdContext.nodeZ_Plm_Input().bind(input);
     wdContext.createZ_Plm_InputElement(input).setV_Type(wdContext.currentZ_Plm_InputElement().getV_Type());
Also I have implemented closing the connection
disconnectifalive
I contacted the basis team... they tell me that everything is fine from their end. they have tried increasing the JCO connection pools.
Thanks for your help in advance
Karthika

Hi Karthika
Check this pdf and try to catch WDDynamicRFCExecution in catch block.
Please put your code in try catch and also import com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecution in your code;
http://www.sappro.com/downloads/WebDynproJava.pdf
Re: User has no RFC authorization for function group.
Hope this will help you.
thanks
Arun Jaiswal

Call to Java Method to Zip directory fails with error Invalid parameter 1

Hi all,
I try to translate the following Java Code to PeopleCode and I do not succeed in it.
Can somebody please help me out ?
On that website http://www3.ntu.edu.sg/home/ehchua/programming/java/J5b_IO.html I extracted the Java Code:
import java.io.File;
public class ListDirectoryRecusive {
public static void main(String[] args) {
File dir = new File("d:\\myproject\\test"); // Escape sequence needed for '\'
listRecursive(dir);
public static void listRecursive(File dir) {
if (dir.isDirectory()) {
File[] items = dir.listFiles();
for (File item : items) {
System.out.println(item.getAbsoluteFile());
if (item.isDirectory()) listRecursive(item); // Recursive call
PeopleCode
I want to get all the files included in the directory
Local string &SourceDirPath = S1_FS_RDCFG_AET.S1_CHMN_TODO;
Local JavaObject &Javadir = CreateJavaObject("java.io.File", &SourceDirPath);
Local array of any &StrArray;
&ArrayOfAny = CreateArrayAny();
Local JavaObject &JavaFilesArray = CreateJavaArray("java.lang.Object[]", 1024);
&JavaFilesArray = &Javadir.listFiles();
CopyFromJavaArray(&JavaFilesArray, &ArrayOfAny);
==> I alway get the error
Message:
Invalid parameter 1 for function CopyFromJavaArray. (2,116) S1_DSITE_ZIP.MAIN.GBL.default.1900-01-01 .DIRECTOR.OnExecute PCPC:511 Statement:9
I thank you in avance
Edited by: Meapri on Jan 23, 2013 9:33 AM

The Pcode I wrote to Zip Directories
Function AddFileToZip(&sDirSeparator, &zipInternalPath, &fileNameToZip, &zipFileName, &outFileStream, &zipStreamOut)
   Local JavaObject &file = CreateJavaObject("java.io.File", &fileNameToZip);
   Local JavaObject &inFileStream = CreateJavaObject("java.io.FileInputStream", &fileNameToZip);
   Local JavaObject &zipEntry = CreateJavaObject("java.util.zip.ZipEntry", &fileNameToZip);
   REM ** Créer le flux de sortie de données pour le fichier ZIP final;
   REM ** We will read &fileNameToZip into a buffer and write it out to &zip;
   Local string &ZippedfileName = &zipInternalPath | &sDirSeparator | &zipFileName;
   REM ** Make sure zip entry retains original modified date;
   &zipEntry.setTime(&file.lastModified());
   &zipStreamOut.putNextEntry(&zipEntry);
   Local JavaObject &buf = CreateJavaArray("byte[]", 1024);
   Local number &byteCount;
   &byteCount = &inFileStream.read(&buf);
   While &byteCount > 0
      &zipStreamOut.write(&buf, 0, &byteCount);
      &byteCount = &inFileStream.read(&buf);
   End-While;
   &inFileStream.close();
   MessageBox(0, "", 99000, 0, "Zipped File : " | &fileNameToZip);
End-Function;
Function getDirContent(&sDirSeparator, &parentFolder, &zipFileName, &outFileStream, &zipStreamOut)
   MessageBox(0, "", 99000, 0, "Directory to scan : " | &parentFolder);
   Local JavaObject &Folder = CreateJavaObject("java.io.File", &parentFolder);
   Local JavaObject &jItems = &Folder.list();
   /* Transformation en Array Pcode*/
   Local array of any &items = CreateArrayAny();
   Local number &idx = 1;
   &items [&jItems.length] = Null;
   CopyFromJavaArray(&jItems, &items);
   For &idx = 1 To &jItems.length
      Local string &Entry = &parentFolder | &sDirSeparator | &items [&idx];
      Local JavaObject &FileOrFolder = CreateJavaObject("java.io.File", &Entry);
      If &FileOrFolder.isDirectory() Then
         getDirContent(&sDirSeparator, &Entry, &zipFileName, &outFileStream, &zipStreamOut);
      Else
         AddFileToZip(&sDirSeparator, &parentFolder, &Entry, &zipFileName, &outFileStream, &zipStreamOut);
      End-If;
   End-For;
End-Function;
Local string &RootName = "C:\TEMP\TEST";
Local string &sDirSeparator = "\";
REM ** Create Output Zip File ;
Local string &ZipFileName = &RootName | &sDirSeparator | "Temp2_Zip.zip";
Local JavaObject &OutFileStream = CreateJavaObject("java.io.FileOutputStream", &ZipFileName, True);
Local JavaObject &zipStreamOut = CreateJavaObject("java.util.zip.ZipOutputStream", &OutFileStream);
REM ** Create Zip File Entries found in the directory;
getDirContent(&sDirSeparator, &RootName, &ZipFileName, &OutFileStream, &zipStreamOut);
REM Close Output Zip File ;
&zipStreamOut.close();Edited by: Meapri on Feb 2, 2013 10:54 AM : copy and paste code that works!
Edited by: Meapri on Feb 2, 2013 10:56 AM
Edited by: Meapri on Feb 2, 2013 11:02 AM

"New" error during ApplyLogOnInfo(...): Invalid parameter value: exceeds...

Invalid parameter value: exceeds the Min or Max or conflicts with existing value or edit mask
error during ApplyLogOnInfo() to the tables contained within a report. Now, this is a "new" error because this was not being thrown when the application was compiled for .Net 1.1 using the Crystal Reports v9.1.5000.0 components. When the application was migrated to .Net 2.0, and set to reference the the 10.2.3600 set of managed components, this started appearing.
Also, this will only occur on certain .rpt files that are loaded, and can be thrown when also executing the VerifyDatabase() method. By certain .rpt files, I mean those that have been opened and saved with Crystal Reports 2008 (warning message when saving indicated that the report will not be able to be opened in Crystal Reports versions earilier the 9.0; should I not assume this is correct?).
' Load a report that had been created in v10, but opened and saved in v12
Dim sFileName As String = "C:\test\CR2008Report1.rpt"
crReportDocument.Load(sFileName, OpenReportMethod.OpenReportByDefault)
crReportDocument.VerifyDatabase() ' Throws the EngineExceptionErrorID.MissingParameterFieldCurrentValue exception:
' Invalid parameter value: exceeds the Min or Max or conflicts with existing value or edit mask
' Load a report that had been created in v10
Dim sFileName As String = "C:\test\CR10Report.rpt"
crReportDocument.Load(sFileName, OpenReportMethod.OpenReportByDefault)
crReportDocument.VerifyDatabase() ' No exceptions; whacky.

>
A G wrote:
> Our product will not get integrated with SharpDevelop as it does with VS though you can use the assembly in you application.
Right, I am aware of the IDE plugin functionality (BTW, I'm going to guess no, but is the functionality present in the "Express" editions?). When a viewer application is created in VS, you can convert/open it in #d and have all of the designer props/pages available. When manually adding the viewer in a new #d project, you can add it, but it doesn't show up visually in the forms designer window (boggle).
> So just make a simple report and try to view it. can you see it?
I will investigate this probably tomorrow...
> Also is your report have any parameter? Dynamic or static?
Yes, there are parameters embedded (?) in the .rpt. There are no parameters added at runtime; only the parameter values are set at runtime.
> Make sure you can see data in report in designer..

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

Error 1 an input parameter is invalid on cluster wire

I have a system with numerous subvi's, however all seems to compile ok and when I run the top level vi it seems to be working fine. However when I press a button to launch a routine that calls numerous sub vis, I get an error:
Labview: An input parameter is invalid. For example, if the input is a path, the path may contain a character not allowed by the OS such as ? or @.
The top level VI "mastercontrol2.vi" was stopped at Wire on the block diagram of "FPGASigGen_GetDataPont.vi".
[OK]
I am then taken to the block diagram of the said VI, and the section of pink cluster wire from the cluster constant is highlighted, in the section just after it enters the while loop. The top level VI then stops executing.
I have tried rebuilding this part of the code in different ways, but always with the same result. The suggested cause in the error message is clearly a red herring, because I don't do any file access anywhere.
Any help would be greatly appreciated!
Using Labview 2011 11.0
Attachments:
FPGASigGen_GetDataPoint.vi ‏42 KB

Just because you see a reference number in the probe does not mean that the reference is valid. If a parallel process closes the reference, you will still have that reference number, but the reference will become invalid. This is the usual case for an error code 1 when dealing with references.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Invalid parameter value Error while Extending PoReqDistributionsVO

Hi,
My Requirement is to restrict user from enetring certain values in a field in iProcurement Page based on some condition. The attribute on which I have to place the validation is CodeCombinationId and the VO name is PoReqDistributionsVO. So, I extended the VO and generated the VORowImpl class for the extended VO. Please note that I have extended the VO just to override the setter method for the CodeCombinationId in the VORowImpl. I did not change any other thing on the VO. Once I deploy the code, I am getting the following error for the first time:
## Detail 0 ##
oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value PoReqDistributionsVO for source passed to method ViewLinkImpl.setSource. Explanation: view def mismatch
And then if I try to open the page again, it gives me multiple distribution lines. (Say for example I have only one distribution line for the requistion line and my distribution table PO_REQ_DISTRIBUTIONS_ALL has total 20 records, then all the 20 records are getting displayed in the front end.)
So, clearly after I extended the VO, the viewlink is not able to identify the viewlink.
I went through the following thread:
oracle.jbo.InvalidParamException: JBO-25006: Invalid parameter value
As suggested in the therad, I thought of copying all the view link related methods from the original VO files. But, I could not get any Viewlink related information in any of the three seeded files PoReqDistributionsVO.xml, PoReqDistributionsVOImpl.class and PoReqDistributionsVORowImpl.class. But I can find one View Link oracle.apps.icx.por.req.server.ReqLineToDistributionsVL in teh server which is linking PoRequisitionLinesVO to PoReqDistributionsVO.
Could anyone suggest me what I need to do to resolve the issue.
Edited by: 892480 on Oct 20, 2011 8:13 AM

Hi Gurus,
Any suggestion on the above issue?

Error 1324: the folder path 'webi/' contains an invalid character

Hi pros,
I am getting this error when trying to install bobj xi 3.1 client version. the service pack is zero.
however, i previously had bobj xi 3.1 server / client components installed and bobj 4.0 client tools.
i uninstalled bobj 4 and bobj xi 3.1 server components from control panel. also, deleted them from registry.
still i am getting the above error.
kindly advise.

Hi,
Can you please check the following thread which is for the exact same question :
error 1324: the folder path 'webi/' contains an invalid character
Regards
Steph

Error connecting using JCO.Client: null

Hi,
I created a WD app which uses the RFC FM. I followed How-To-build-webdynpro.pdf document to create the WD and trying to deploy and run, I see the view page but when I trigger the action via button UI element I get following error as exception in the try catch block of execute method
In the NWA I see
Could not create JCOClientConnection for logical System: 'WD_MODELDATA_DEST' - Model
An exception has occurred: Erorr accessing cache [region]='XCM_SESSION_SCOPE'.
[EXCEPTION]
com.sap.isa.core.cache.Cache$Exception: Cannot return access for region 'XCM_SESSION_SCOPE'. Cache is not ready
I'm using following existing JCO definition by configuring them with correct parameters. Tested them successfully
WD_RFC_METADATA_DEST
WD_MODELDATA_DEST
What am I missing? In SM04 tcode I see 2 connections are opened with 2 Megabyte not released for a long time. I think if connections are released correctly it should drop to 1 megabyte. Is there anything that I need to do just after execute method as shown below (I have replaced function module with <FM> in below code)
try {
         wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
     } catch(Exception exception) {
          msgMgr.reportException(exception.getLocalizedMessage(), false);
      wdContext.nodeOutput().invalidate();
      msgMgr.reportSuccess("Success");
The error is in the catch block which is displayed on the view page.
Thanks
Praveen
I modified the above code and put in finally block to close the connections as follows, please let me know if this is OK. I still get error message as "Error connecting using JCO.Client: null" but no additional connections in the SM04 after adding finally block.
try {
         wdContext.node<FM>_Input().current<FM>_Get_InputElement().modelObject().execute();
     } catch(Exception exception) {
          msgMgr.reportException(exception.getLocalizedMessage(), false);
     }finally {
          // disconnect the connection
          wdContext.<FM>_Get_InputElement().modelObject().modelInstance().disconnectIfAlive();
Edited by: Praveen11 on Oct 5, 2009 9:06 AM

Thanks Satish.
The issue is resolved. I think it was to do with permission, as I was running directly from NWDS deploy and run the session didn't have proper authorisation or something that was causing this error.
When I copy pasted the URL in the correct browser session window I got no error and function module was successfully executed.   However the issue now is that values are not showing up in the view may be to do with mapping context or model I'll review and post back as different thread.
Thanks
Praveen

Invalid parameter SECONDARY_RECORD-PSKEY Error in Personal Data Screen

Hi All,
We are using EHP6. The Personal Data iview is throwing an error while trying Edit something.
I am able to add a new register but getting the following dump while trying to Edit/Save
This apply for all the employees.
This apply for all the employees.
I looked through SAP Note-1815863 - Dump in Class CL_HRPA_INFOTYPE_CONTAINER Method. However all the tables mentioned in that Note seemed to be configured properly.
Any help will be appreciated.
Short Dump
Error while processing your query
What has happened?
The URL call sap/bc/webdynpro/sap/HRESS_A_PERSINFO was terminated because of an error.
Note
The following error occurred in system DEV : Invalid parameter SECONDARY_RECORD-PSKEY , value 1008119301067 9999123120130621000
The error occurred on application server HRE_05 and in work process. 8
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_HRPA_INFTY_CONTAINER_DATA~MODIFY_SECONDARY_RECORD of program CL_HRPA_INFOTYPE_CONTAINER====CP
I have checked:
Report RPUPAV00.
Subtype config, inconsistent data.
I updated table V_T582V & V_T582W.
I maintained tcode-GENIL_MODEL_BROWSER.
I also have checked the following:
sap > bc> webdynpro > HRESS_A_PERSINFO ----check this once activate or not ...right click and check is it activated or not
I also have run the report RPUFIXDS for that personal number, , however the issue follow.
The error not occur when I delete the register for the the following V_T582V & V_T582W, however the fields for the infotype secondary not appear in the dynpro of the infotype 0002.
Thanks
Regards

There could be several possible causes
Usually this error occurs if a secondary infotype functionality has been delivered via SP or SNOTE for infotype 0002 but the PERNR you are using does not have secondary infotype record
Tables V_T582V & V_T582W determine if a secondary infotype will be used - if you remove entries here this will deactivate the secondary infotype useage - this might be one way to resolve the issue - but perhaps you wish to use the secondary infotype - in some cases it might be required- for example ESS might expects a secondary infotype and throw an error if there is an issue
If you wish to use the secondary infotype you need the delivered entries in V_T582V & V_T582W and you need to run RPUPAV00 for any PERNR that has a 0002 record existing prior to the new secondary infotype being introduced to ensure they have a secondary infotype record key that matches the primary infotype key

Error connecting Domains: Invalid parameter,tdom_link contains NULL

Similar Messages

Maybe you are looking for