Error creating customer- 'AR_NO_ROW_IN_SYSTEM_PARAMETERS'

To create an employee as a customer in oracle, I call the API
APPS.HZ_CUST_ACCOUNT_V2PUB.CREATE_CUST_ACCOUNT()
This API then calls HHZ_ACCOUNT_VALIDATE_V2PUB.validate_cust_account()
and it errors out without creating a customer.
The error is on the sql statement
SELECT GENERATE_CUSTOMER_NUMBER INTO l_profile
FROM AR_SYSTEM_PARAMETERS;
And the error is...'AR_NO_ROW_IN_SYSTEM_PARAMETERS'
Why does this happen? my AR_SYSTEM_PARAMETERS table is empty...is this incorrect?
I thought customer numbers were created via a sequence. Can anyone help?
Thanks.

Why the pfile is not in the database folder?It must be there since the time when you created the db?
The other pfiles that you are mentioning,are they forteh same db?Check in your $ORACEL_BASE/admin/pfile folder.There should be a pfile for your db over there.You can copy it to the database folder , rename it to your required name and use it for startup.
Aman....
PS:You may need to investigate where did the original one went?

Similar Messages

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Error: Create customer specific areas with services

Hi Experts,
I am facing problem while creating customer specific areas with services. We have a development for Appraisals and trying to make it work via ESS.
I have defined resource for area page, defined area, assigned area to an area group page.
Still the Area is not displaying on Area page.
Please let me know as to where I have gone wrong.
Thanks!

You need to create your workset, and check the URL in PCD of the Iview

Error creating Customer Exit variable, please help

Hi Experts,
This is the scenario, I need to obtain the convertion rate from the table TCURR in order to convert several currencies to USD, so I created a Customer Exit variable that gets the Period and based on that obtains the conversion rate for the last day of the given month from TCURR, the problem is when I created the Formula Variable to get the value from the Customer exit variable I got the following error:
'ZVARREGEXIT' ALREADY EXISTS; SELECT A DIFFERENT NAME.
But in not using that name anywhere on my variables creation, Im doing something wrong? How can I check wheres is that variable being used.
Ideas, comments are always welcome and appreciated.
Regards.

Hi Ed,
Open Admin Workbench (RSA1) and choose Transport Connection --> Object Types --> Query Elements --> Variable --> Select Objects. Find the variable of interest and transfer it back to the main screen, then right-click and choose 'Display Description'. That will show you a "where used" list of queries, workbooks, etc.
Next, you can use the previous technique to open one of the queries, find the variable in the query, and determine which InfoObject it is associated with.
Hope this helps!
Regards,
Saurabh

OIM 11g - Error Creating Custom 'Service Account' Field

Hi experts,
we would like to create a custom "Service Account" checkbox on a Form Provisioning, in way to enable\disable the 'service account'
status on a target account.
We wanto to control the 'Service Account' status through a checkbox into the account form.
Here our steps:
- Create a new Field on 'UD_ADUSER' Form, we add a 'Service Account' CheckBox as boolean type with default value = 0.
- Create a new Adapter 'Service Account':
---- into 'Variable List' tab we define 2 variables: ProcessInstance -> Long and ServiceAccountCheckBox -> boolean
---- into 'Adapter Task' tab we define an IF(ServiceAccountCheckbox == 1) launch tcUserOperationsIntf.changeToServiceAccount method, with our variable 'ProcessInstance' as Input
- Create a new task into 'Process Definition', we created 'Service Account Updated'.
---- into task tab named 'Integration' we set our custom adapter, mapping Process Data > Process Instance and Process Data > Service Account with adapter variables.
When we assign an 'AD User' resource to a user, the new checkbox 'Service Account' is showed into the form.
If we check/uncheck the checkbox the task 'Service Account Updated' is launched, but the response is "*Specified User Account Not Found*"
I think that the problem is into the adapter..
Any one can help us?
Best Regards
AT

As I said map user key(usr_key) and process instance key(orc_key) form design console
and use below query to get oiu_key
prockey=<PROCESS_INSTANCE_KEY>;
user_key=<USR_KEY>;
String sqlquery="select oiu_key from oiu " +
"where ORC_KEY = prockey " +
"and usr_key = user_key" ;
Connection con=Platform.getOperationalDS().getConnection();
Statement st=con.prepareStatement(query);
ResultSet rs=st.executeQuery();
while(rs.next())
long oiuKey=rs.getLong("oiu_key");
now pass this key in the method

Urgent help needed in creating customer ship_to and bill_to site id

Hi,
I am using an api to create customer ship_to and bill_to address, in Oracle OM R12 but the api does not return values. I am including the code so any suggestion will be helpful.
declare
l_num_billing_site_use NUMBER;
l_num_cust_site_id NUMBER;
l_rec_cust_site_use apps.Hz_Cust_Account_Site_V2pub.CUST_SITE_USE_REC_TYPE;
l_rec_customer_profile apps.Hz_Customer_Profile_V2pub.CUSTOMER_PROFILE_REC_TYPE;
l_chr_retcode VARCHAR2(20);
l_chr_errbuf VARCHAR2(200);
l_num_count NUMBER;
begin
-- fnd_global.apps_initialize (1885, 21623, 660); -- user id, --resp_id (OM Super User), appl_id
-- mo_global.init ('AR');
-- mo_global.set_policy_context ('S', 511);
l_rec_cust_site_use.site_use_code := 'BILL_TO';
l_rec_cust_site_use.cust_acct_site_id := 24919;
l_rec_cust_site_use.primary_flag := 'N';
l_rec_cust_site_use.created_by_module := 'CONVERSION'; -- Change
BEGIN
apps.Hz_Cust_Account_Site_V2pub.create_cust_site_use( p_init_msg_list => FND_API.G_FALSE
, p_cust_site_use_rec => l_rec_cust_site_use
, p_customer_profile_rec => NULL --l_rec_customer_profile
, p_create_profile => FND_API.G_FALSE
, p_create_profile_amt => FND_API.G_FALSE
, x_site_use_id => l_num_billing_site_use
, x_return_status => l_chr_retcode
, x_msg_count => l_num_count
, x_msg_data => l_chr_errbuf);
EXCEPTION
WHEN OTHERS THEN
FND_FILE.PUT_LINE(FND_FILE.LOG,' Unexpected error creating customer site for Cust Site Id ' || l_num_cust_site_id || ' due to: ' || SQLERRM);
END;
dbms_output.put_line('cust_site_use:'||l_num_billing_site_use);
end;
Thanks,
Srinivas
Edited by: user2138419 on Feb 14, 2010 4:46 PM

It might be a crossdomain.xml problem.
Please make sure that the server hosting the xml allows the domain where the swf is hosted.
You can start with:
<?xml version="1.0" encoding="utf-8" ?>
<cross-domain-policy>
<allow-access-from domain="*"/>
<site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

How to create Custom error message in SharePoint 2013

Hi,
I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
Is there any way to create any custom error page or can I manipulate SharePoint default error page?
Any help?
Thank you

Hi,
You can create an event receiver to set the validation error messages. One such post to redirect the custom error page is as follows
https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
Create custom error page for SharePoint event receiver
Please mark it answered, if your problem resolved or helpful.

Error while creating customer

While creating customer from AR responsibility, I am getting an error while clicking "details" tab for "Ship to"
error I am getting are
1. The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: KeyFlexfieldDefinitionFactory.getStructureNumber could not find the structure definition for the flexfield specified by Application = SQLGL, Code = GL# and Structure number =
2. Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-20001: Operating unit -1 does not exist in the target database. ORA-06512: at "APPS.APP_EXCEPTION", line 72 ORA-06512: at "APPS.GL_GLOBAL", line 65 ORA-06512: at line 1 ;
any idea why is it coming, I checked Operating unit profile option i.e MO: Op Unit and MO: Sec. , all are fine.

The error is occuring because Oracle is trying to validate/set a DFF.
Check the DFF attached to the customer entity, address entity or site use entity.
Especially look at the value sets attached to the DFF.
Look at the value set definition and the default value for the field.
Hope this helps,
Sandeep Gandhi

Build app with ODT and Oracle UDT - Error while creating custom class

Hello CShay,
I am testing you sample code to create UDT with ASP.Net app. It is also published in Oracle magazine.
The article is also published at following link:
http://www.oracle.com/technology/oramag/oracle/08-may/o38net.html
I am able to successfully implement all the steps before "Using Custom Class Wizard". When I right click on any of the object (CUSTOMER_OBJ, PHONELIST_OBJ, and ADDRESS_OBJ) and select Generate Custom Class, I get the following error:
Oracle custom class wizard.
Class can be generated only for either C#, VB or Managed C++ projects.
Am I missing any thing?
Thanks in advance for your help.

Yes I confirm that I choose File->New Website.
I don't see the following option
File -> New Project, and then under Visual C#, select ASP.NET Web Application
I am using VS2005 Professional Edition.
The options I see under Visual C# are:
If I click on
Windows tab:
Windows Application
Windows Control Library
Console Application
Empty Project
Class Library
Web Control Library
Window Servcie
Crystal Report Application
and Search Online Templates in My Templates tab.
Couple of options for Smart Device which also doesn't include ASP.Net
then Database, Starter kits and Office tabs which also doesn't include ASP.net thing.
I don't know how did you see that option or you might be using different version of VS (Enterprise).
But right now I am stuck.
Please provide me your valuable comments.
Thanks for your help.

Error message while creating customer.

Hi there,
I am trying to create customer using Tcode XD01.
I have input the Account Group, Company Code, Sales Organisation, Distribution Chanell & Division and on pressing Enter I am getting the error message 'Sales area ITCS RS AG is not defined for customers'.
ITCS - my sales Org
RS - Distribution Chanell
AG - Division.
I have already done the assignment in SPRO and sales Area is already set up.
Please help.
regards,
Subhrojit

Hi
Check whether u have maintained the common Distribution channel and Common Division in VOR1 and VOR 2 transaction codes.
If not maintain the same, and also maintain S.org+Common D.Ch + Common Division.
Regards
Vamsi Javaji,

Error while creating customer account sites from backend

I am creating Customer Account Sites using the TCA API from Toad.
I am getting the following error
The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
The Operating unit has been defined.
I am using the following code:
DECLARE
p_cust_acct_site_rec hz_cust_account_site_v2pub.cust_acct_site_rec_type;
x_return_status VARCHAR2(2000);
x_msg_count NUMBER;
x_msg_data VARCHAR2(2000);
x_cust_acct_site_id NUMBER;
BEGIN
p_cust_acct_site_rec.cust_account_id := 9462;
p_cust_acct_site_rec.party_site_id := 5473;
--p_cust_acct_site_rec.language := 'US';
p_cust_acct_site_rec.org_id := 126;
p_cust_acct_site_rec.created_by_module := 'TCA-EXAMPLE';
hz_cust_account_site_v2pub.create_cust_acct_site(
'T',
p_cust_acct_site_rec,
x_cust_acct_site_id,
x_return_status,
x_msg_count,
x_msg_data);
dbms_output.put_line(SubStr('x_return_status =
'||x_return_status,1,255));
dbms_output.put_line('x_msg_count = '||TO_CHAR(x_msg_count));
dbms_output.put_line(SubStr('x_msg_data = '||x_msg_data,1,255));
IF x_msg_count >1 THEN
FOR I IN 1..x_msg_count
LOOP
dbms_output.put_line(I||'. '||SubStr(FND_MSG_PUB.Get(p_encoded =>
FND_API.G_FALSE ), 1, 255));
END LOOP;
END IF;
END;
Thanks and Regards,
K tanna

Duplicate post.
Error while creating customer account sites
Error while creating customer account sites

Error While Creating Customer Account Site.

Hi ,
I am creating a customer thru API's.
I am succesffuly creating location,party,party site,party site use,customer account.But unable to create customer account site. I am getting the below error:
Unable to process your transaction. The operating unit is either invalid or it cannot be derived. Please verify your Multi-Org profile options.
Could anyone help me to resolve out this issue.

Hi,
What is the application release?
Did you set the Application/Multi-org context properly before using this API?
Note: 732671.1 - 'Change PO API' Errors with 'Multi-Org profile options' as Org Context Is Not Set Correctly
Note: 420787.1 - Oracle Applications Multiple Organizations Access Control for Custom Code
Note: 209185.1 - How To Set the Applications Context (FND_GLOBAL.APPS_INITIALIZE)
Regards,
Hussein

Prob While Creating Customer Master - Error Msg "Number '0' Not defined"

Dear Experts,
I am Trying to create a customer with diff SP, SH, BP and PY. I was able to create Customer for BP and PY.
But now when I go and try to created a SH customer with xd01 for my Sales.Org (99SS-XS-X1),
In the Sales Area Data, Partner Function Tab, Partner function field the Number is 0 before the SH function field (instead of Internal / Blank) and at the bottom give the error Msg that "Number '0' is not define". I have Cross checked the my Number ranges(no-22 from 7000-7999), account groups(ZA22) and Partner function (SH), everything seems to Ok. But unable to find the solution. plz help me with this if you have ever come across such a prob.
I would like to mention that the previously had no issues in creating customers following same procedure. I guess some one must have changed some settings by accident.
This prob is only specific while creating only SP and SH Customers.
Many ThanX.

Thanks Amit for your valuable suggestion, But today I was able to solve the problem with help of my trainer, Someone has changed the default settings in partner determination, the solution is below which will help anyone who may come across a similar Problem.
Spro->IMG->Sales & Distribution->Basic Functions->Partner Determination->Setup Partner Determination->Setup Partner Determination for Customer Master->Partner Functions
Find the partner Function SP/SH/BP/PY there partner type should be KU. If anyone changes this settings Then the above problem arises.
Regards.

Error while creating customer master data

dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
Debesh

Hi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

While creating customer master i am getting the Communication error

Hi experts,
while creating customer master i am getting the Communication error with the external tax system (VERTEX_MS0018) please tellme how to solve this issue
Regards,
Anil prasad
Edited by: prasadanil on Sep 16, 2011 12:52 PM

hI Prasad,
It seems you are maintaining the address data for a country with jurisdiction code. Different external control systems can behave in different ways.
1. You entered a jurisdiction code that matches the postal code but not the city (possibly due to a typo).
a) Behavior when you use Taxware: There is no message and data can be saved.
b) Behavior when you use Vertex: Due to the incorrect city, no comparison jurisdiction code can be determined and message TAX_TXJCD861 is issued with a text from the vertex system that may be unintelligible.
2. You do not enter a jurisdiction code, but you do enter a postal code and a city that does not match the code (possibly due to a typo).
a) For Taxware: If the jurisdiction code could not be explicitly determined, a selection dialog box containing the relevant tax jurisdiction codes for the postal code appears. You select one. This and the corresponding city are transferred.
b) For Vertex: The TAX_TXJCD861 message is issued (behavior as in 1b). Other terms TAX_TXJCD861, TAX_TXJCD101, TAX_TXJCD107.
For resolving this issue, you can check SAP Note 677850 - Address data: Check/new determination jurisdiction code.
Hope you will resolve the above issue with these inputs.
Let me know if you need any further details.
Ravi.

Error creating customer- 'AR_NO_ROW_IN_SYSTEM_PARAMETERS'

Similar Messages

Maybe you are looking for