Error: Create customer specific areas with services

Hi Experts,
I am facing problem while creating customer specific areas with services. We have a development for Appraisals and trying to make it work via ESS.
I have defined resource for area page, defined area, assigned area to an area group page.
Still the Area is not displaying on Area page.
Please let me know as to where I have gone wrong.
Thanks!

You need to create your workset, and check the URL in PCD of the Iview

Similar Messages

Error for customer specific Authorization check (User Exit)

Dear Experts,
I am facing a problem in PM.
I have created a maintenace plan for calibration via t code IP42 and mentioned the order type PM05. Scheduling is done for the order. I got the order number.
I have released the order and got the inspection lot number.
While entering the results recording through t code QE17, the reluts are out of the specified range, i have given the valuation Rejected, immediately system is giving an error message as below:
"Error for customer specific Authorization check (User Exit)"
Though there is no user exit activated in the system, this message is coming and not allowing the result recoring for rejection.
If I'm entering the result recording within the specified range, then valuation is Accepted and its allowing to save.
I have checked the following user exits:
QQMA0002: QM: Authorization Check for Entry into Notif. Transaction
QQMA0026: PM/SM: Auth. check when accessing notification transaction.
The above 2 User Exits are not active.
I have also checked a note 429066. But it says incase of any dump for that user exit only its applicable and more over the current version of the system is ECC 6.0 packae 15, where as that note is applicable upto 4.6C.
Please some one help me on this issue.
Thanks and Regards,
Praveen.

Dear Pete,
I have cheked with my technical team, There is no hotpacks updated recently. This is the implementaion project I'm in, so performing the cycle for the first time.
Any how I got it solved, in T code QE17, after entering the Inspection lot in next screen goto menu path Settings - User settings - Defects recording mention the reprt type and tick on Reprt type Changable.
At the time of result recording if the valuation is Rejected then it ask for defects recording close that window if not rwequired then save, the error message no longer apperaing now.
Regards,
Praveen

Create Custom Applicant Number with Prefix

Hi all,
Can anyone help me to write a fast formula?
I want to create custom applicant number with Agency (hiring agency) code as Prefix.
for example if agency name is Global Recruitment Agency
Applicant number should be: GLO0001. How can I concatenate it?

I always prefer the fast formula to generate custom numbers
The fast formula has one limitation that it can differentiate between system types (Employee- Applicant- Contingent) so you can create different numbering logic for each, but it can not differentiate between system user types like if you have 2 user types and both of them assigned to system type employee.
I think you are not facing this limitation in your case, and you can use the fast formula
Check Oracle Documentation:
Oracle Human Resources Management Systems
FastFormula User Guide
Release 12.1.x
Part No. E14567-01, 02, 03
Writing Formulas for Person Number Generation
page 1-141
Or this article ID 1305948.1

Create customer master record with reference to existing division

how to create customer master record with reference to existing division?

what type of reports sd consultant configure in implementation project?and in supporting project?

How to create customer specific fields within PC 10.0?

Hello,
for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
Regards
Andre Yuji

Dear Johannes,
We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
as well as RE_RHGRENZ4 to Set a new end date to the objects.
At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
Regards,
Karina Atonaidan

PA - Creating customer specific infotypes

Hello experts,
How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
Thanks and Regards,
Shilpa

Hi
would you mind forwarding the documents to me as well
my mail id is [email protected]
Thanks in advance
Regards,
RK

Error creating custom reports. Permissions issue with custom reports

I am having permission issues with reports. I am building a new Configuration Manager 2012 infrastructure and I have configured the Site server on Server1 and the DB is on Server2. Server2 also hosts the Reporting Point and SSRS roles/features. If
I look in Monitoring at the Site Status and Component Status are all green no issues with the setup.
Running SQL 2008 SP2 (no CUs). I have a service account that I used to install Configuration Manager and SQL. This service account is running the SQL service on Server2 and i am using the same account as the Reporting Services Point Account.
I log into the SCCM console with a different user account, lets call it Admin1. This account is a member of the Full Administrator role. I can run any built in report.
When I open the SSRS website and try to create a custom report I connect the DataSource using Windows Authentication. So the Datasource is connecting using the logged in users account. In this case Admin1. I test the connection and it connects fine.
I test this query. (Select * from v_R_System) I only have about 10 workstations discovered so the report shouldn’t be very big. I get an error “The Select permission was denied on the object ‘v_R_System’, Database ‘CM_XXX’, schema ‘dbo’. (Microsoft sql server,
Error: 229)”
I have fixed the SELECT permission error by going into the database (using SQL Management studio) and granting Admin1 Select rights to the Configuration Manager database. I can now run the above query and make custom reports.
My 2<sup>nd</sup> problem is that other members of the Full Administrator role cannot run these custom reports unless I go into the database and grant them the SELECT permission.
Question:
Should I have to manually go into the database to add SELECT permissions(i could use a group)? shouldnt Configuration Manager take care of this for me?
Maybe the built in reports use the SQL service account rights and the custom ones do not? Am I doing something wrong with the Datasource when I create these custom reports?
What is the correct process for creating custom reports?

I think i am getting closer to a solution. After the Custom report is created. i can go back into the report. Delete the DataSource. Then browse for a dataSource. there is a datasource located in http://server2/reportserver/ConfigMgr_XXX/
That datasource is used by all builtin reports. if you view the properties on the Credentials tab it is set to "do not use credentials" and the option is greyed out / cannot be changed.
it looks like i still need the SELECT permissions on the database to create the report initially but at least i have solved the problem with viewing these reports.
Can anyone confirm that what i did is correct?

Error creating a new user profile service application: The specified database is not a valid synchronization database

When trying to create a new user profile service application on a new SharePoint install I get the following error:
"The specified database is not a valid synchronization database"
The installation then fails and does not create the third database.
I found some threads with similar problems but it involved upgrading an existing db. In this case we want to create a new one. Here is the relevant ULS log info:
Starting schema provisioning of SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Provisioning the SP15_TEST_ENT_SyncDB database with the script at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\SQL\SPS\drop_procs.sql.
Provisioning the SP15_TEST_ENT_SyncDB database with a script stream.
Ensuring that the SP15_TEST_ENT_SyncDB database exists . . .
The SP15_TEST_ENT_SyncDB database does not exist.
It will now be created.
Setting the AutoClose option to False on the database SP15_TEST_ENT_SyncDB.
Setting the ArithAbort option to True on the database SP15_TEST_ENT_SyncDB.
Setting the TruncLogOnChkpt option to True on the database SP15_TEST_ENT_SyncDB.
Starting schema evaluation of existing SynchronizationDatabase 'SP15_TEST_ENT_SyncDB'
Validate Database: validating sync database
Validate Database: validation failed: Error code -2
Application error when access /_admin/NewProfileServiceApplicationSettings.aspx, Error=The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Microsoft.SharePoint.Administration.SPDatabaseException: The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.Administration.SPDatabaseException:
The specified database is not a valid synchronization database
at Microsoft.Office.Server.Administration.SynchronizationDatabase.Provision()
at Microsoft.Office.Server.Administration.UserProfileApplication.Provision()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.DoCreateApplication()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.NewProfileServiceSettingsPage.OnOkButtonClick(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.HandleError(Exception e)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
I Tried to create another one under a different name (databases also) and I get the same error.
The SharePoint instance has the march mandatory update installed. The sql instance we are using is an existing SQL cluster for other SharePoint poc's.
Has anybody seen this issue before?

I had the same problem and could not figure out what was wrong for the longest time. I then had the idea to check in the model system database to see if there were any extra custom tables in that database. Any tables that are in the model database
are put into any new database when it is created. I had some custom tables in the model database so I deleted the custom tables in the model database and deleted the failed user profile service application and its databases and then tried to recreate
the user profile service application again and it worked with no errors

Custom WS Policy with Service account in OSB while invoking a https service

Hi,
I need your help on one of my issue in invoking an https service from OSB. I read through various posting and tried the below steps in this forum
-Added the certificate for the https site to soa domain
-Registered the https webservice as a Business service
-Registerd a proxy service on top of this Business service
-In the service call out on Proxy service I did a replace operation on the entire soap header with the below string
<soapenv:Header xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
     <wsse:UsernameToken wsu:Id="UsernameToken-4" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
          <wsse:Username>sysuser@yahoo</wsse:Username>
          <wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">ABIHAIKLPLKLPMLERLER</wsse:Password>
     </wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
-After doing all the above steps my call out worked from the test console, If you see closely the userid(sysuser@yahoo) and password(ABIHAIKLPLKLPMLERLER) is hard coded here.
I need a way to mask the credentials and have the user pass them when they invoke the proxy service. I read through some posting and it was listed that we can create a custom policy and attach that custom policy to the Business service. But my problem here is the userid has an extra char @, so I wasn't able to create the user account with those credentials in OSB, but I was able to create the userid and password using a service account. Iam not sure how I can use this service account along with the custom policy.
Can you please provide me a suitable approach, which will solve my issue. I appreciate your time and help
Thanks
Jagan.

Hi,
Below are the steps followed
- OSB Proxy service has 'oracle/wss_username_token_service_policy' attached to it.
- Iam invoking this from BPEL. BPEL process has 'oracle/wss_username_token_client_policy' attached.
- I can invoke the osb proxy from bpel by passing credentials - No Issues.
Now I need to put some authorization restriction to the proxy service, so only specific users can access that.
-I used Role=Admin as a policy condition restriction under security in Proxy service.
-Then I went to proxy test console and I added the 'oracle/wss_username_token_client_policy' credentials and weblogic/xxxxx at Transport section and I was able to invoke the process. Here weblogic has a Admin Role.
-I cannot invoke the same proxy service from BPEL in Jdeveloper now.
All Iam trying to do is to protect my proxy by authrorization policy.
Thanks
Jagan.

How to create customer specific InfoTypes in CRM?

Hi folks,
we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
Thanks!
Martin

Martin,
Yes I think just using a BADI and storing in custom tables is the easiest approach in your case. However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb. You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
Take care,
Stephen

Not able to create customer master data with country code US

Hey All,
I am not able to create customer master data in the Transaction Code XD01/FD01 with the country code as US.
The error message for the same is NO JURISDICTION CODE COULD BE DETERMINED. I have checked the tax code settings but could not locate the problem.
Request you to provide me with a solution.
Thanks & Regards
VK

Hey all,
I have checked the field in the account group(OBD2) but its in optional status
and also checked the country settings for US in the transaction code OY17 still the same error message, but when i tried checking the settings for a differnt company code's customer data base i can see that there is a number mentioned in the address tab under tax jurisdiction feild (beside time zone) which is not populating for this company code.
so, do anyone know where exaclty we mention this number so that it populates in that field of address.
hope am clear
hope to receive a solution
thanks & regards
vinila

Create customer master record with reference

Hello guys,
I'm trying to create a customer master record with reference using XD01 (existing in the referent company code only) but no data are copied at the general level of the customer (not only the address data but also these contained in KNA1). Is there something I can do in order to get the referent data?
Thanks

Only data that does not refer directly to the customer/vendor is copied from the reference account to the new account, that is,no address information, and so on.

How to use customer-specific fields with FI-CA event 940?

The following text can be found under FI-CA event 940:
You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
E_XREF2     LIKE     ACCIT-XREF2     Referenz (BSEG-XREF2)
E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
Cheers,
Teo

Hi Teo,
I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
Regards,
Harikumar. S
Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

Posting Error for Pensioner who are with some Third party Deductions

Dear all:
While posting Payroll result to FI, there is a issue that "cost centre is not assigned" for the pensioners(Who are with some deductions like income Tax, bank Loan and so on) . The Cost Centre is assigned with Org Unit and Positon, but for pensioners, there is no position in the org unit.
how we could handle it?
Any tip is greatly appreciated,
Thank a lot in advance!

Hi Sathya,
This is how we have setup the retirees (pensioners).
If we speak about the pensioners from Business point of view, then there should be only pensioner department (or PA) and every retiree should be assign to it.
So we have created one position which is applicable to every retiree and only assigned to org unti (retiree) which has the cost center default on it.
Try presenting this structure to your client. This will surely simplify the business processes around pensioners.
Arti

How to Create Custom Content Type with 100 site columns ?

Hi EveryOne,
i have one requirement to create custom conten types in sharepoint 2013 as follows.
1. Create a content type with 100 site columns ( in this 100 site columns includes 10 mms feilds and 10 lookup fields).
2.when we deploy the content type in other server if already the same content type existing in the server it should be upgrade the existing content type.
Please advise how do develop the solution ( using power shell script or visual studio with event receiver or xml file)
Regards,
Srinivas

Try below:
http://www.mindfiresolutions.com/Add-Columns--Fields-Programmatically-to-a-SharePoint-List-282.php
using(SPSite
oSPsite = new SPSite("http://Web-URL"))
    oSPsite.AllowUnsafeUpdates =
true;
using (SPWeb oSPWeb = oSPsite.OpenWeb())
        oSPWeb.AllowUnsafeUpdates =
true;
/* get the SPList object by list name*/
SPList lst = oSPWeb.Lists["EmpList"];
/* create a Numeric field for EmpID */
SPFieldNumber fldEmpID = (SPFieldNumber)lst.Fields.CreateNewField(
SPFieldType.Number.ToString(),
"EmpID");
       fldEmpID.Required =
true;
        fldEmpID.DisplayFormat =
SPNumberFormatTypes.NoDecimal;
/* create a Text field for Name */
        SPFieldText fldName = (SPFieldText)lst.Fields.CreateNewField(
SPFieldType.Text.ToString(),
"Name");
        fldName.Required =
true;
        fldName.MaxLength = 50;
/* create a Date field for Dob*/
SPFieldDateTime fldDob = (SPFieldDateTime)lst.Fields.CreateNewField(
SPFieldType.DateTime.ToString(),
"Dob");
        fldDob.DisplayFormat =
SPDateTimeFieldFormatType.DateOnly;
/* create a Currency field for Salary */
        SPFieldCurrency fldSal = (SPFieldCurrency)lst.Fields.CreateNewField(
SPFieldType.Currency.ToString(),
"Salary");
        fldSal.Currency =
SPCurrencyFieldFormats.UnitedStates;
        fldSal.DisplayFormat =
SPNumberFormatTypes.TwoDecimals;
/* add the new fields to the list */
        lst.Fields.Add(fldEmpID);
        lst.Fields.Add(fldName);
        lst.Fields.Add(fldDob);
        lst.Fields.Add(fldSal);
/* finally update list */
        lst.Update();
        oSPWeb.AllowUnsafeUpdates =
false;
    oSPsite.AllowUnsafeUpdates =
false;
If this helped you resolve your issue, please mark it Answered

Error: Create customer specific areas with services

Similar Messages

Maybe you are looking for