Error creating materialized view log using DBlink

Hi guys,
I have 2 databases in diferent machines . (machine A and B)
Machine A is my production database and I have a database link in machine B accessing Machine A
CREATE MATERIALIZED VIEW vm_test
BUILD IMMEDIATE
REFRESH FAST ON commit as
select * from test@A
-- no problem in this first operation the materialized view was created sucessfully
Now I need to create the LOG
SQL> CREATE MATERIALIZED VIEW LOG ON test
2 PCTFREE 5
3 TABLESPACE prodemge_2006
4 STORAGE (INITIAL 10K NEXT 10K);
CREATE MATERIALIZED VIEW LOG ON test
ERROR at line 1:
ORA-02050: transaction 5.21.8771 rolled back, some remote DBs may be in-doubt
ORA-02068: following severe error from A
ORA-03113: end-of-file on communication channel
What could be causing this error ?
Thank you,
Felipe

ORA-02050 transaction string rolled back, some remote DBs may be in-doubt
Cause: Network or remote failure during a two-phase commit.
Action: Notify operations; remote databases will automatically re-sync when the failure is repaired.
ORA-02068 following severe error from stringstring
Cause: A severe error (disconnect, fatal Oracle error) was received from the indicated database link. See following error text.
Action: Contact the remote system administrator.
M.S.Taj

Similar Messages

Error while creating materialized view which using database link

Helo!
I'm getting error "ORA-00942: table or view does not exist" when I want to create materialized view.
Details:
1. On destination database I create a database link:
CREATE DATABASE LINK SDATABASE
CONNECT TO MYUSER
IDENTIFIED BY MYUSERPASS
USING 'ORCL';
=> Command "SELECT * FROM TABLE1@SDATABASE" returns data normally!
2. On source database I create MATERIALIZED VIEW LOG:
CREATE MATERIALIZED VIEW LOG
ON TABLE1
WITH PRIMARY KEY
INCLUDING NEW VALUES;
3. Now, when I want to create MATERIALIZED VIEW on destination database:
CREATE MATERIALIZED VIEW TABLE1
REFRESH FAST
START WITH SYSDATE
NEXT SYSDATE + 1/1440
WITH PRIMARY KEY
AS SELECT * FROM TABLE1@SDATABASE;
...I get error "ORA-00942: table or view does not exist"!
How is that possible if command "SELECT * FROM TABLE1@SDATABASE" returns data normally?
Thanks,
Voranc

And, I'm using Oracle 10g.
Voranc

CREATE MATERIALIZED VIEW LOG ERROR

Quick question:
This doesn't work:
CREATE MATERIALIZED VIEW LOG ON STOCKMOVES
NOCACHE
LOGGING
NOPARALLEL
WITH PRIMARY KEY, (ITEMKEY,WAREHOUSE,AGENT,DOCUMENTID,STATUS,RATE,PRICE,DISCOUNTPRC,SUPPLYQUANTITY)
INCLUDING NEW VALUES
Fails with "ORA-00922: missing or invalid option" and points to "(ITEMKEY"
Can't find what's wrong.

Comma after PRIMARY KEY is not required.
Regards,
Archana
"While one person hesitates because he feels inferior, the other is busy making mistakes and becoming superior."
http://justoracle.blogspot.com/
-----------------------

How to CREATE MATERIALIZED VIEW LOG (MV fast refresh) with some JOINS

Hi @ all,
i'm trying to create a MATERIALIZED VIEW LOG for a fast refresh of a MATERIALIZED VIEW.
It works fine with a simple Request in the MATERIALIZED VIEW:
CREATE MATERIALIZED VIEW MV_ZOTD43_P
TABLESPACE GDII
BUILD IMMEDIATE
REFRESH FORCE AS
SELECT * FROM ZOTD43_P;
COMMIT;
CREATE MATERIALIZED VIEW LOG ON ZOTD43_P
TABLESPACE "GDII"
WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
call DBMS_MVIEW.REFRESH('MV_ZOTD43_P', 'f');
But when I use a complex SQL-Request with some JOINS (one of the Table with spatial Data) in the MATERIALIZED VIEW, I get an error:
CREATE MATERIALIZED VIEW MV_TEST
TABLESPACE GDII
BUILD IMMEDIATE
REFRESH FORCE AS
SELECT lptd04_p.sst_nr AS sst_nr,
lptd03_p.aaaa AS aaaa,
lptd04_geom.geom as geom
FROM lptd04_p lptd04_p
JOIN lptd01_p lptd01_p ON lptd01_p.cre_nr = lptd04_p.sst_nr
JOIN lptd04_geom ON lptd04_geom.sst_nr = lptd04_p.sst_nr
JOIN lptd03_p lptd03_p ON lptd03_p.lief_nr = lptd04_p.lief_nr;
COMMIT;
CREATE MATERIALIZED VIEW LOG ON LPTD04_P
TABLESPACE "GDII"
WITH PRIMARY KEY, ROWID, SEQUENCE INCLUDING NEW VALUES;
call DBMS_MVIEW.REFRESH('MV_TEST', 'f');
Error report:
SQL Error: ORA-12004: REFRESH FAST kann für Materialized View "GDI"."MV_GDI_SST_STAMM" nicht benutzt werden
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2255
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2461
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 2430
ORA-06512: in Zeile 1
12004. 00000 - "REFRESH FAST cannot be used for materialized view \"%s\".\"%s\""
*Cause: The materialized view log does not exist or cannot be used. PCT
refresh is also not enabled on the materialized view
*Action: Use just REFRESH, which will reinstantiate the entire table.
If a materialized view log exists and the form of the materialized
view allows the use of a materialized view log or PCT refresh is
possible after a given set of changes, REFRESH FAST will
be available starting the next time the materialized view is
refreshed.
Am I doing something wrong or is it not possible CREATE MATERIALIZED VIEW LOG when the MATERIALIZED VIEW got some JOINS?
Regards,
Greq

Thanks for the link Alessandro ,
the error seems something to do with the Column-Type SDO_GEOMETRY, so
i create a new thread in the Spatial Discussion forum:
FAST REFRESHing of Oracle Materialized Views containing SDO_GEOMETRY column
Regards,
Greq

Bug: Can not create materialized view log on 11G XE

Hi,
I log in as HR user and try create materialized view log
CREATE MATERIALIZED VIEW LOG ON HR.EMPLOYEES;I get error
>
Error starting at line 1 in command:
CREATE MATERIALIZED VIEW LOG ON HR.EMPLOYEES
Error at Command Line:1 Column:0
Error report:
SQL Error: ORA-00439: feature not enabled: Advanced replication
00439. 00000 - "feature not enabled: %s"
*Cause: The specified feature is not enabled.
*Action: Do not attempt to use this feature.
>
You can create materialized view log on 10G XE without any problem.
Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0

Is it a bug in 11g or 10g?
It was reported earlier in now archived beta forum. {thread:id=2214092}
The current doc lists MV sites only (and "No" for Advanced Replication feature):
http://download.oracle.com/docs/cd/E17781_01/license.112/e18068/toc.htm#BABDFDAI

ORA-12096: error in materialized view log

Hi All,
I had created a fast refresh materialized view. Log was also created.
Now i dropped the mv and the logs.
But now every time i update or insert into this customer table i get error message.
ORA-12096: error in materialized view log on Customer
ORA-00942: table or view does not exist
There are entries in the DBA_MVIEW_LOGS for customer table.
Please suggest.

Hi,
What database version are you on?
And do you have access to Metalink/My Oracle Support?
Found this, by the way:
ORA-12096: error in materialized view log on <table>
If problems occur when you try to access a log file for a materialized view, the system issues an ORA-12096 error message which is followed by the actual error. If the ORA-12096 error message is accompanied by an ORA-00942 message, the problem may be due to an online reorganization that was only partially undone. In this case, you can drop the log file for the materialized view manually (after you have verified that it is no longer required):
DROP MATERIALIZED VIEW LOG ON <table>;
Edited by: hoek on Jul 29, 2009 2:15 PM

ORA-12096 error in materialized view log on %s . %s

Hi,
I faced the peculiar error message "ORA-12096 error in materialized view log on ..." when trying to insert into a table. But .. there is not a materialized view log (none in the current schema nor in other users' schema).
Note:I use OraDB10g v2
Thanks ....a lot
Sim

Sim,
NOthing relevant is coming up over metalink for the erorr. Some non-required results are coming but I dnt think that they are helpful. The most nearest to your error is this thread over google,
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://blog.chinaunix.net/u/7121/showart_460192.html&sa=X&oi=translate&resnum=8&ct=result&prev=/search%3Fq%3DORA-12096%2Berror%2Bin%2Bmaterialized%2Bview%2Blog%2Bon%2BORA-00942%2Btable%2Bor%2Bview%2Bdoes%2Bnot%2Bexist....%26hl%3Den%26rls%3Dcom.microsoft:en-US:%26rlz%3D1I7GGLJ%26pwst%3D1
It does talk abot the same thing, mview logs.
Do let me know what you got.
Cheers
Aman....

Is it possible to create materialized view log file for force refresh

Is it possible to create materialized view log file for force refresh with join condition.
Say for example:
CREATE MATERIALIZED VIEW VU1
REFRESH FORCE
ON DEMAND
AS
SELECT e.employee_id, d.department_id from emp e and departments d
where e.department_id = d.department_id;
how can we create log file using 2 tables?
Also am copying M.View result to new table. Is it possible to have the same values into the new table once the m.view get refreshed?

You cannot create a record as a materialized view within the Application Designer.
But there is workaround.
Create the record as a table within the Application Designer. Don't build it.
Inside your database, create the materialized with same name and columns as the record created previously.
After that, you'll be able to work on that record as for all other within the Peoplesoft tools.
But keep in mind do never build that object, that'll drop your materialized view and create a table instead.
Same problem exists for partitioned tables, for function based-indexes and some other objects database vendor dependant. Same workaround is used.
Nicolas.

CREATE MATERIALIZED VIEW LOG ON / SNAPSHOT LOG ON

HI,
Is there any difference between create materialized view log on and creat snapshot on.
Did some googling, found out that: A snapshot log is a table associated with
the master table of a snapshot and Is used for refresh the master table\'s snapshots.
Materialized view log is a table associated with the master table of a materialized view. Seem like the same.
By the way, are these tables important? Will my database function as normal without these view log.
regards,
becks

Where did you pick up this syntax from ?
The MV Log that will be created on DOCUMENT will be called MLOG$_DOCUMENT.
So, the correct syntax is :
create materialized view log on DOCUMENT with primary key;this will create a "table" called MLOG$_DOCUMENT which serves as the Materialized View Log on the real table called DOCUMENT. This will allow you to create one or more Materialized Views based on DOCUMENT, which can be fast refreshed because of the presence of the MV Log. For example :
create materialized view MV_DOCUMENT refresh fast on demand as select DOC_ID, DOC_DATE from DOCUMENT;(i.e. assuming you want an MV that has only two columns from the table DOCUMENT.
Hemant K Chitale
http://hemantoracledba.blogspot.com

How to create materialized view log on remote database

How do you create materialized view logs on a remote database.
I tried
create materialized view log on global_express_views.vccs438_project_work_request@h92edwp with sequence, rowid ( columns...)
ERROR at line 1:
ora-00949 illegal reference to remote database

Hi,
I am not getting the error exactly. But have some suggestion:
If the schema owner does not own the master tables, then the schema owner must have the GLOBAL QUERY REWRITE privilege or the QUERY REWRITE object privilege on each table outside the schema.
Hope, this may help you?
Thanx.. Ratan

ORA-12096: error in materialized view log on ORA-01301:insufficient privile

Hi,
One of our ebusiness Apps 11510 instances has database that was
upgraded from 9.2.0.6 to 10.2.0.4 with Database Vault.
After that, we are getting an error:
ORA-12096: error in materialized view log on "SCHEMA"."TABLE_NAME" ORA-01301:insufficient privileges
Can you please let know what can be the reason. Which user is being checked for the privileges?
Regards

I am facing the same issue in one of our internal instances.
Apps Environment has been upgraded from Database 9.2.0.6 to Database 10.2.0.4 with Database Vault. We started facing this issue and the same error after the upgrade. MLOG definition has not changed.
What privilege is it expecting to be present for the schema.
The definition of the MLOG is as given below
LOG_TRIGGER = NULL
ROWIDS = YES
PRIMARY_KEY = NO
OBJECT_ID = NO
FILTER_COLUMNS = NO
SEQUENCE = NO
INCLUDE_NEW_VALUES = NO

ORA-12096: error in materialized view log on a table

Hi while updating a table getting below error
ORA-12096: error in materialized view log on "FII"."FII_GL_JE_SUMMARY_B"
What might be the problem.
Thanks.

might be table definition has changed, you may need to drop the mview log and recreate it.

Create materialized view log with rowid hangs indefinitely..

Hi
create materialized view log on advice_note with rowid;
This stmt hangs indefinitely...
Help needed in resolving this issue
Rp

i have resolved the issue myself.
Found out the sessions that are locking the object , killed all those sessions & pids.
Rp

Error Creating Materialized View With a Job

Oracle 9ir2
I've created a job like this in a java class:
...Java Code ...
cs = conn.prepareCall ("DECLARE v_job NUMBER; BEGIN DBMS_JOB.SUBMIT(v_job,'begin CTH_REGENERA_VM; end;', TRUNC(SYSDATE+1) + (3/24)); END;");
...Java Code ...
The Procedure called in the Job:
CREATE OR REPLACE PROCEDURE CTH_REGENERA_VM
     AUTHID CURRENT_USER IS
     existe NUMBER(1);
     cur BINARY_INTEGER := DBMS_SQL.OPEN_CURSOR;
     fdbk BINARY_INTEGER;
BEGIN
     SELECT count(*) INTO existe FROM user_mviews WHERE mview_name = 'CTH_PRESENTA_A_VM';
     IF existe > 0 THEN
          DBMS_SQL.PARSE(cur, 'DROP MATERIALIZED VIEW CTH_PRESENTA_A_VM', DBMS_SQL.NATIVE);
     fdbk := DBMS_SQL.EXECUTE(cur);
          INSERT INTO CTH_HISTORIAL VALUES('ELIMINADA VM CTH_PRESENTA_A_VM', SYSDATE);
          COMMIT;
     END IF;
     DBMS_SQL.PARSE(cur, 'CREATE MATERIALIZED VIEW CTH_PRESENTA_A_VM
     TABLESPACE DAT1_CTH
     STORAGE(INITIAL 16M NEXT 8M MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0)
               XMLTYPE XML STORE AS CLOB (           TABLESPACE DAT1_CTH
               STORAGE(INITIAL 16M NEXT 8M MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0))
     AS select FICHA, XML,
     extractvalue(xml, ''/FICHE/Encab_de_nombre_geogr�fico_a'') as MUNICIPIO,
     extractvalue(xml, ''/FICHE/Encab_de_nombre_geogr�fico_c'') as CALIFICACION,
     extractvalue(xml, ''/FICHE/Encab_de_nombre_geogr�fico_b'') as PROVINCIA,
     extractvalue(xml, ''/FICHE/Encab_tem�tico_de_materia_a[1]'') as MATERIA,
     extractvalue(xml, ''/FICHE/Fecha_cronol�gica_b[1]'') as FECHA,
     extractvalue(xml, ''/FICHE/Datos_matem�ticos_a[1]'') as ESCALA
     from cth_xmltable', DBMS_SQL.NATIVE);
     INSERT INTO CTH_HISTORIAL VALUES('ASIGNO EL PARSE DE MATERIALIZED', SYSDATE);
     fdbk := DBMS_SQL.EXECUTE(cur);
     INSERT INTO CTH_HISTORIAL VALUES('EJECUTO EL PARSE DE MATERIALIZED', SYSDATE);
     INSERT INTO CTH_HISTORIAL VALUES('CREADA VM CTH_PRESENTA_A_VM', SYSDATE);
     DBMS_SQL.PARSE(cur, 'CREATE INDEX CTH_INDEX1
     ON CTH_PRESENTA_A_VM(XML)
     INDEXTYPE IS CTXSYS.CONTEXT
     PARAMETERS (''storage cth section group ctxsys.auto_section_group'')', DBMS_SQL.NATIVE);
     fdbk := DBMS_SQL.EXECUTE(cur);
     INSERT INTO CTH_HISTORIAL VALUES('CREADO INDICE ORACLE TEXT CTH_INDEX1', SYSDATE);
     DBMS_SQL.PARSE(cur, 'CREATE INDEX CTH_IDX_MUNICIPIO3
          ON CTH_PRESENTA_A_VM(UPPER(MUNICIPIO))
          TABLESPACE IDX1_CTH
          STORAGE (INITIAL 1M NEXT 512K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0)', DBMS_SQL.NATIVE);
     fdbk := DBMS_SQL.EXECUTE(cur);
     INSERT INTO CTH_HISTORIAL VALUES('CREADO INDICE CTH_IDX_MUNICIPIO2', SYSDATE);
     DBMS_SQL.PARSE(cur, 'CREATE INDEX CTH_IDX_FICHA2
     ON CTH_PRESENTA_A_VM
     (FICHA)
     TABLESPACE IDX1_CTH
     STORAGE(INITIAL 1M NEXT 512K MINEXTENTS 1 MAXEXTENTS UNLIMITED PCTINCREASE 0)', DBMS_SQL.NATIVE);
     fdbk := DBMS_SQL.EXECUTE(cur);
     INSERT INTO CTH_HISTORIAL VALUES('CREADO INDICE CTH_IDX_FICHA2', SYSDATE);
     DBMS_SQL.CLOSE_CURSOR(cur);
COMMIT;
END;
I got always an error in the created materialized view. If I call the procedure with SQL Plus, it run ok. The user
has CTXAPP, DBA roles, so I supouse it is not a privileges problem. I also tried to create a simple materialized view or a table, and always got an error ora-12011
Thanks in advance.

If I call the procedure with SQL Plus, it run ok. Are you using the same user to run it in SQL*Plus as runs it from Java.
The normal reason for procedures to fail like this is privileges. Particularly, we cannot run procedures using privileges we have been granted through roles.
The user has CTXAPP, DBA roles, so I supouse it is not a privileges problem. Try granting the system privilege CREATE MATERIALIZED VIEW to the user and see what happens.
I drop the materialized and create again, cause it's the fastest way I've found. With a DBMS_MVIEW.REFRESH is too slow.I find that surprising as drop & create has to do all the work that a refresh has to do plus some more - maybe it's something to do with XML. Did you try adding a snapshot log and going for FAST? I don't know whwther the XML procesing would render the view complex - have you explained it?
Cheers, APC

Error creating Materialized Views

We are trying to create a materialized view between Oracle instances, one running 10.1.0.4 on Solaris, and one running 10.1.0.2 on Windows 2000 Svr.
A link was established, and we can run select statements
select count(*) from accounts@capsprd1
however we get an error when trying to create the materialized view. See the following.
SQL> create materialized view ACCOUNTS
2 tablespace capstrac2
3 nocache
4 logging
5 noparallel
6 build immediate
7 refresh complete
8 NEXT TRUNC(SYSDATE) + 1 + 6/24
9 AS
10 SELECT * FROM ACCOUNTS@CAPSPRD1
11 /
create materialized view ACCOUNTS
ERROR at line 1:
ORA-04052: error occurred when looking up remote object
[email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-03106: fatal two-task communication protocol error
ORA-02063: preceding line from CAPSPRD1
Any help would be greatly appreciated.
Thanks

Thanks for the feedback.
We are actually performing a complete refresh, not a fast refresh, so I did not think we needed to create MV logs on the master.
I did grant Create Materialized View to the schema, however I still receive the same issue. One thing I noticed in the error is it is automatically appending .WORLD on to the remote database. A domain is not used on the remote side (Solaris), and I thought I had configured the 'data warehouse' side (Windows) to not use a domain.
ORA-04052: error occurred when looking up remote object
[email protected]
Can anyone tell me why .WORLD is being appended?
Thanks for the help.

Error creating materialized view log using DBlink

Similar Messages

Maybe you are looking for