ERROR: Device '/dev/sda3' not found.

This is my first time compiling a custom kernel. I am trying to compile zen kernel 3.12.3. Whenever I try to boot it up, it says this:
ERROR: device '/dev/sda3' not found. Skipping fsck
ERROR: Unable to find root device '/dev/sda3'
Then it drops me to a recovery shell. When I look at the contents of '/dev' none of my partitions are found on sda. '/dev/sda' is listed but nothing else. Has anybody else had this problem? /i have read various fixes but none of them have helped.
Sorry this is my first post.
Thanks in advance.

Well, the whole point of the initramfs is to have it load the necessary modules to mount the rootfs. So if mkinitpcio complains that there are no modules to put in there, that is pretty problematic.
I think you should take a look at the PKGBUILD for the official Arch kernel. It includes a few lines that allow you to use menuconfig or nconfig or whatever, prior to that actual 'make'. I think that any time you install things to your system, you should probably be leveraging the package manager in order to properly track the files. This is particularly true when you are an Arch user and the creation of packages is so damn easy.

Similar Messages

[SOLVED] Initramfs trim: "device '/dev/sda3' not fount" still boots.

SOLUTION I should have never removed UUIDs from my fstab, instead I should have ADDED them to my bootloader config. Putting UUIDs back in fstab and adding the UUID for my root partition to syslinux.cnf solved this.
I've been pruning my initramfs following falconindy's blog post which I learned about from success stories in the systemd startup times thread.
I ended up with this mkinitcpio.conf
MODULES="ahci sd_mod ext4"
BINARIES="fsck fsck.ext4"
HOOKS="base consolefont"
COMPRESSION="lzop"
I've also tried without the compression method specified. I've added in a couple modules which I admittedly don't know much about, but I found them in the lsmod list after appending the "break=postmount" to a working initramfs. These included uhci_hcd and ehci_hcd.
In every case I get the same error message on boot:
device '/dev/sda3' not found. Skipping fsck
Unable to find root device '/dev/sda3'
and I am dropped to a recovery shell. There is a message that says (paraphrasing) "type exit to attempt to continue". I type exit and hit enter and I get a message:
Trying to continue (This will likely fail)
But it does not fail - it works perfectly and the system boots successfully.
So in short - everything works, but there is some early boot test that "thinks" it won't work and leads to me having to exit from a recovery shell.
I realized my fstab still had UUIDs, so I changed those to /dev/sdaX and rebuilt the initramfs, but this had no effect.
The best I can guess (and it is a wild guess) is that the only remaining difference between the working initramfs and this problematic stripped down version is the absence of udev. I did look at a diff of the lsinitcpio of a working version and the failing trimmed down version. I've removed any items that went both ways in the diff output (eg ">some/file ... <some/file") and this is what remains:
7c6
< ./hooks/udev
16,18d14
< ./usr/bin/fsck.ext3
20,21c16,17
< ./usr/bin/udevadm
< ./usr/bin/udevd
130a127,128
> ./usr/lib/libpthread-2.16.so
> ./usr/lib/libpthread.so.0
137,151d134
< ./usr/lib/udev
< ./usr/lib/udev/scsi_id
< ./usr/lib/udev/ata_id
< ./usr/lib/udev/rules.d
< ./usr/lib/udev/rules.d/80-drivers.rules
< ./usr/lib/udev/rules.d/60-persistent-storage.rules
< ./usr/lib/udev/rules.d/50-udev-default.rules
< ./usr/lib/libpthread-2.16.so
< ./usr/lib/libpthread.so.0
< ./usr/lib/libattr.so.1.1.0
< ./usr/lib/libattr.so.1
< ./usr/lib/librt-2.16.so
< ./usr/lib/librt.so.1
< ./usr/lib/libacl.so.1.1.0
< ./usr/lib/libacl.so.1
254a238,246
> ./usr/lib/modules/3.5.3-2-ck/kernel/hwa-hc.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/isp116x-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/isp1362-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/isp1760.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/ohci-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/oxu210hp-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/r8a66597-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/sl811-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/u132-hcd.ko
255a248,250
> ./usr/lib/modules/3.5.3-2-ck/kernel/whci-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/xhci-hcd.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/ftdi-elan.ko
256a252,256
> ./usr/lib/modules/3.5.3-2-ck/kernel/wusb-wa.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/wusbcore.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/umc.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/uwb.ko
> ./usr/lib/modules/3.5.3-2-ck/kernel/whci.ko
274,275d273
< ./etc/udev
< ./etc/udev/udev.conf
The ck-modules lead me to try this with a "vanilla" arch kernel which I also have installed. With the default arch kernel I am left in a recovery shell but exiting does not lead to a successful boot. I don't know what this really means, but perhaps something unique to the ck-kernel setup allows a recovery from this problem.
Any suggestions for further troubleshooting or exploration?
edit I put udev back in the hooks array, rebuilt the image, and now it works fine. So udev is the relevant peice of the puzzle. I thought the idea of using the modules, though, was so that udev wouldn't be needed. I must have missed a needed module, though I cant figure what it would be.
edit2 I've used "break=postmount" on both the working image with udev, and with the failing image without udev and I do an "lsmod" in the shell. I get the exact same list of modules. So all the correct modules are all loaded properly. But the absence of udev seems to cause a problem.
Last edited by Trilby (2012-09-01 15:10:14)

Thanks. I solved the issue. I found this thread: https://bbs.archlinux.org/viewtopic.php?pid=901651
Basically I just copied all of the modules listed in lsmod to the MODULES section of the mkinitcpio.conf on the HD, removed autodetect from the hooks, and ran mkinitcpio -p linux-mac. I'm not sure what all of that was actually mandatory, I didn't check, but I know it worked. I think the main thing was the pata_macio module.
Turns out persistent block device naming wasn't my issue at all. I reverted back to using /dev/sdaX names.

[SOLVED] ERROR: Unable to find root device '/dev/sda3'

Earlier I updated the kernel to my arch system and found this error while trying to boot. I hate to post this because there are so many topics like it, but I've been looking for hours for a solution to this problem and can't find one.
Here is the output:
Booting 'Arch Linux'
root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernet /vmlinuz-linux root=/dev/sda3 ro
[Linux-bzImage, setup=0x4200, size=0x2ff2d0]
initrd /initrd @ 0xfd17000, 0x2c878c bytes]
Probing EDD (edd=off to disable)... ok
Decompressing Linux... Parsing ELF... done.
Booting the kernel.
:: Starting udevd...
done.
Waiting 10 seconds for device /dev/sda3 ...
ERROR: device '/dev/sda3' not found. skipping fsck.
ERROR: Unable to find root device '/dev/sda3'.
You are being dropped to a recovery shell
type 'exit' to try and continue booting
sh: can't access tty; job control turned off
My partition layout is like this:
swap: /dev/sda1
boot: /dev/sda2
root: /dev/sda3
extended: /dev/sda4
home: /dev/sda5
I have two hard drives, but i'm sure /dev/sda is the one with my OS.
Here are some things I've tried:
This was at the very bottom of the pacman wiki
# mkdir /mnt/arch
# mount /dev/sdaX /mnt/arch (your root partition)
# cd /mnt/arch
# mount -t proc proc proc/
# mount -t sysfs sys sys/
# mount -o bind /dev dev/
# mount /dev/sdaX boot/ (your /boot partition) #This step is not needed if you do not have a separate boot partition
# chroot .
# pacman -Syu udev mkinitcpio
# mkinitcpio -p linux
I've also tried performing the above, downgrading the kernel, updating my mirrorlist, reinstalling the kernel, and rebooting as mentioned here.
I've alsa tried a few other things that I've read, but can no longer remember.
Any help would be greatly appreciated! Thanks.
Last edited by colton7909 (2012-05-25 02:09:36)

Thank colton
Same problem here, but on a mac book (not mine eyh )
So, for those how have the problem (or need a live usb for mac or uefi systems),
1) with a 32bits system
- download gparted live cd
- use it for the step 3
2) with a 64bits system:
- you need the gparted live cd too: mount it and copy the EFI directory somewhere; then umount it;
- download a 64bits system (system rescue cd, as colton said is enough, follow the instructions for installation on their website first);
- mount you live usb, install the 64bits system;
- copy EFI system on the key
- edit the grub.cfg in EFI/boot/ , add the following before the other entries:
menuentry "System Rescue" {
set gfxpayload=keep
linux /syslinux/altker64 nomodeset efi
initrd /syslinux/initram.igz
3) repairing...
- boot the broken computer with the live usb
- mount the partition on which your system is (e.g. /dev/sda1 on /mnt)
- chroot it, init the system as needed (mount /dev, /proc, etc. the easier way is using init scripts)
% chroot /mnt /bin/bash
% /etc/rc.sysinit
% mkinitcpio -p linux

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Error 2 iTunes64.msi not found

I am getting an error that says Error 2 iTunes64.msi not found when trying to install Itunes in my windows laptop.

Hello Juan_fran,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues. I have included some additional information about the specific error:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#2
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.

Hi All
 This is the Error where i got from my sample chatting application...
ReferenceError: Error #1069: Property DSPriority not found on String and there is no default value.
at mx.messaging::Producer/handlePriority()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messagi ng\Producer.as:190]
at mx.messaging::Producer/internalSend()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \Producer.as:169]
at mx.messaging::AbstractProducer/send()[E:\dev\4.x\frameworks\projects\rpc\src\mx\messaging \AbstractProducer.as:561]
at SampleMessagin/sendMessage()[D:\FlexJavaPrograms\SampleMessagin\src\SampleMessagin.mxml:2 9]
at SampleMessagin/___SampleMessagin_Button2_click()[D:\FlexJavaPrograms\SampleMessagin\src\S ampleMessagin.mxml:74]
 this is the code
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
 currentState="{st}"
 creationComplete="consumer.subscribe()">
<fx:Script>
<![CDATA[
 import mx.messaging.events.MessageEvent;
 import mx.messaging.messages.AsyncMessage;
 import mx.messaging.messages.IMessage;
 import mx.modules.IModule;
 import mx.states.State;
 [Bindable]
 public var st:String="";
 public function changeStateHandler(event:Event):void
 st = "Login"
 //send message throug this method
 protected function sendMessage():void
 var msg:IMessage = new AsyncMessage();
 msg.headers = uname.text;
 msg.body = sendText.text;
 producer.send(msg);
 sendText.text = " ";
//message Handler
 protected function consumer_messageHandler(event:MessageEvent):void
 // TODO Auto-generated method stub
 var resp:IMessage = event as IMessage;
 dispText.text = resp.headers.toString()+" :: "+resp.body.toString()+"\n";
]]>
</fx:Script>
<fx:Declarations>
<s:Producer id="producer"
 destination="chat"/>
<s:Consumer id="consumer"
 destination="chat"
 message="consumer_messageHandler(event)"/>
</fx:Declarations>
<s:states>
<s:State name="State1"/>
<s:State name="Login"/>
</s:states>
<s:Panel x="246" y="137" width="366" height="200" title="Login Here" includeIn="State1">
<mx:HBox horizontalCenter="2" verticalCenter="-30">
 <s:Label text="Enter UR Name"/>
 <s:TextInput id="uname"/>
 <s:Button id="login" label="Login" click="changeStateHandler(event)"/>
</mx:HBox>
</s:Panel>
<s:Panel includeIn="Login" x="327" y="78" width="353" height="369" title="Welcome:{uname.text}">
<s:TextArea x="6" y="11" height="222" width="335" id="dispText"/>
<s:TextArea x="10" y="241" height="85" width="258" id="sendText"/>
<s:Button x="276" y="241" label="Send" height="76" click="sendMessage()"/>
</s:Panel>
</s:Application>
and my messaging-config.xml is as follows
 <?xml version="1.0" encoding="UTF-8"?>
<service id="message-service"
 class="flex.messaging.services.MessageService">
 <adapters>
 <adapter-definition id="actionscript" class="flex.messaging.services.messaging.adapters.ActionScriptAdapter" default="true" />
 
 </adapters>
 <default-channels>
 <channel ref="my-polling-amf"/>
 </default-channels>
 <destination id="chat"/>
</service>
 can any one help me what is the error present here.............
 why it is showing error .. am i wrote anything wrong in this code .. please help me....

I'm not the expert on this topic, but I think this line:
msg.headers = uname.text;
...is throwing the error. Look into how to properly construct the headers for the message. They should be in name/value pairs.

User Tracker Error: Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!.

Hello
I'm running Cisco LMS 3.2 on a Windows Server 2003 R2 SP2.
Products installed:
CiscoWorks Common Services 3.3.0
Campus Manager 5.2.1
CiscoView 6.1.9
CiscoWorks Assistant 1.2.0
Device Fault Manager 3.2.0
Internetwork Performance Monitor 4.2.0
Integration Utility 1.9.0
LMS Portal 1.2.0
Resource Manager Essentials 4.3.1
Since some days I receive this error when I want to open the UserTracker-Results over the WebGUI:
Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!.
When I try to acces the DB via CLI I get this error:
orbProperties={org.omg.CORBA.ORBInitialPort=42342, org.omg.CORBA.ORBClass=org.ja
corb.orb.ORB, org.omg.CORBA.ORBInitialHost=SERVERNAME, org.omg.CORBA.ORBSinglet
onClass=org.jacorb.orb.ORBSingleton, jacorb.implname=CSEDSPersistentIOR, org.omg
.PortableInterceptor.ORBInitializerClass.bidir_init=org.jacorb.orb.giop.BiDirCon
nectionInitializer}
_Orb=org.jacorb.orb.ORB@154864a
log4j:ERROR No appenders could be found for category (com.cisco.nm.ani.clients.u
tng.application.UTDataManager).
log4j:ERROR Please initialize the log4j system properly.
ERROR UTCLI: Error loading preferences. URN_NOT_FOUND : urn "ogs_server_urn" : N
ot found !!
Does anybody know how to resolve this issue? I couldn't find anything on the internet.
Thanks
Dominik

Hi jclark
I've attached a ZIP file which contains both files.
Thank you for your help

Itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

itunes wont open at all, error message : quicktime was not found .... please reinstall ... i did that but no luck this only seems to have happened since the 10.4 update, im on windows 7 ..

Can you start QuickTime on your computer?
You'll probably have to search for the Windows Installer Cleanup Utility and use it to remove QuickTime Player and iTunes. Then download and install the iTunes again.

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

Report Generation Toolkit (Word) : How to use correctly bookmark and cross-reference without "Error! Reference source not found"

Hi,
I try to generate a report using a template. In my template I use some cross-reference to refer to one bookmark. For exemple in the first page I created a bookmark for my name and in the header I created a cross-reference refer to my name. The problems is when I run my VI the bookmark actualise perfectly but the cross-reference refer to the bookmark can't actualise with the same value and generates an error : "Error! Reference source not found".
Can somebody help me please!
Nki
Solved!
Go to Solution.
Attachments:
01.jpg ‏72 KB

Hi,
When i create the word template, the bookmaks and the cross-reference referred to the bookmark update correctely. The problem is when I try to change the bookmark using "report generation from template vi" the bookmark change but not the cross-reference and the error generated is "Error! Reference source not found".
I make coople reasherch and i think they have no solution for this because : "if the text in a heading referred to in a cross-reference is revised, the cross-reference to the heading may no longer work" (http://office.microsoft.com/en-us/word-help/troubleshoot-cross-references-HP005189368.aspx).
To "resolved" this problem I create an other bookmark in the template who have the same value white the principle bookmark.
I use Labview 2011 and Micosoft office 2010.

Error(10,47): EntryFlowPageCO not found in class oracle.apps.ap.oie.entry.

Hi All,
I extended a CO named IndusFinalReviewPageCOXX and I got the following error.
Error(10,47): EntryFlowPageCO not found in class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in class indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX.
I already drag the class file of EntryFlowPageCO in path myclasses\oracle\apps\ap\oie\entry\summary\webui
and import the file. but the error remains same..after that I compile the class file of EntryFlowPageCO and found one more CO imports in EntryFlowPageCO. I drag class file of that CO also in appropriate path.. But still get the same error.
Pls give me the solution ASAP.
Thanks
Amit Jaitly

Amit,
In the standard CO you can check that controller EntryFlowPageCO is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.
Its under oracle/apps/ap/oie/entry/webui so put the same under this directory structure.
Regards,
Gyan

Error 1308.Source file not found with 9.4.2 Admin Install point

I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?

I am having the same problem, all the relevant info was already covered in the "thewaker" post above.   I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
    Acceptable:      Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
    Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks.

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Error 1046: Type was not found or was not a compile-time constant: Component Event.

Hi Everyone..
I am getting an Error 1046: Type was not found or was not a compile-time constant: Component Event.
The ComponentEvent class has been imported,and also the event handling code is there. I am not sure what else is wrong, hope somebody can advise me. Thanks. The code is below, the point where the error occurs as indicated by the compiler has been highlighted.
package
import flash.display.Sprite;
import flash.media.Camera;
import flash.media.Microphone;
import flash.media.Video;
import fl.controls.TextArea;
import fl.controls.Button;
import fl.controls.TextInput;
import flash.events.SyncEvent;
import flash.events.MouseEvent;
import flash.events.FocusEvent;
import flash.net.SharedObject;
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.NetStatusEvent;
import flash.events.FocusEvent;
import flash.events.ComponentEvent;
public class VideoChat extends Sprite
private var button:Button;
private var text_so:SharedObject;
private var textArea:TextArea;
private var textInput:TextInput;
private var chatName:TextInput;
private var nc:NetConnection;
private var nsOut:NetStream;
private var nsIn:NetStream;
private var rtmpNow:String;
private var msg:Boolean;
private var cam:Camera;
private var mic:Microphone;
private var vid:Video;
public function VideoChat ()
 //Set up UI
 textArea = new TextArea();
 textArea.setSize(500,280);
 textArea.move(20,54);
 addChild(textArea);
 textInput = new TextInput();
 textInput.setSize(500,24);
 textInput.move(20,340);
 textInput.addEventListener(ComponentEvent.ENTER,checkKey);
 addChild(textInput);
 button = new Button();
 button.width=50;
 button.label="Send";
 button.move(20,370);
 button.addEventListener(MouseEvent.CLICK, sendMsg);
 addChild(button);
 chatName = new TextInput;
 chatName.setSize (100,24);
 chatName.move (80,370);
 chatName.text="<Enter Name>";
 chatName.addEventListener (FocusEvent.FOCUS_IN, cleanName);
 addChild(chatName);
 //Connect
 rtmpNow="rtmp:/VideoChat ";
 nc=new NetConnection;
 nc.connect (rtmpNow);
 nc.addEventListener(NetStatusEvent.NET_STATUS,doSO);
 cam = Camera.getCamera();
 mic=Microphone.getMicrophone();
 //Camera Settings
 cam.setKeyFrameInterval(15);
 cam.setMode (240, 180, 15, false);
 cam.setMotionLevel(35,3000);
 cam.setQuality(40000 / 8,0);
 //Microphone Settings
 mic.gain = 85;
 mic.rate=11;
 mic.setSilenceLevel (25,1000);
 mic.setUseEchoSuppression (true);
 //Video Setup
 vid=new Video(cam.width, cam.height);
 addChild (vid);
 vid.x=10, vid.y=20;
 //Attach local video and camera
 vid.attachCamera(cam);
private function doSO(e:NetStatusEvent):void
 good=e.info.code == "NetConnection.Connect.Success";
 if(good)
 //Set up shared object
 text_so=SharedObject.getRemote("test", nc.uri, false);
 text_so.connect (nc);
 text_so.addEventListener(SyncEvent.SYNC, checkSO);
private function checkSO(e:SyncEvent):void
 for (var chung:uint; change<e.changeList.length; chng++)
 switch(e.chageList[chng].code)
 case "clear":
 break;
 case "success":
 break;
 case "change":
 textArea.appendText (text_so.data.msg + "\n");
 break;
private function cleanName(e:FocusEvent): void
 chatName.text="";
private function sendMsg(e:MouseEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
private function checkKey (e:ComponentEvent):void
 noName=(chatName.text=="<Enter Name>" || chatName.text=="");
 if (noName)
 textArea.appendText("You must enter your name \n");
 else
 text_so.setProperty("msg", chatName.text +": " + textInput.text);
 textArea.appendText (chatName.text +": "+textInput.text +"\n");
 textInput.text="";
//Create NetStream instances
private function checkConnect (e:NetStatusEvent):void
 msg=e.info.code == "NetConnection.Connect.Success";
 if(msg)
 nsOut=new NetStream(nc);
 nsIn=new NetStream(nc);
 //NetStream
 nsOut.attachAudio(mic);
 nsOut.attachCamera(cam);
 nsOut.publish("camstream");
 nsIn.play("camstream");

Hi Guys...
I have found out what is wrong. I was importing the wrong package the correct one should have been:
import fl.events.ComponentEvent;
instead of
import flash.events.ComponentEvent;
I hope this is helpful for anyone caught in a simillar situation as me...Thanks..

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

ERROR: Device '/dev/sda3' not found.

Similar Messages

Maybe you are looking for