Error downloadin​g software

I just bought an Officejet 2620 All-in-One Series and I tried download the latest software on my Mac OS X computer but an error message came up saying. 
 "We're sorry. It seems that there was an unexpected error downloading the software for your printer. Please check back later or you can insert the CD and choose the option "No thanks, I prefer the basic CD installation" when the first screen appears."
Is my Mac not compatible with the software?

Try installing the following software, be sure to select the HP Scan option during the installation to get full functionality:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=mp-120064-4&cc=us&dlc=en&lc=en​...
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Error while Deleting Software Component

    Hi All,
    I am getting following error while deleting Software Component Version:
    Unable to Delete object DELETEDEMO_COMPONENET, 1.0 of delete.
    You cannot delete a sotware component version if it contains imported interfaces.
    Is there any shortcut isntead of deleting all objets manuually?
    Sri

    Hi Sri.
    It's very simple
    Solution:
    Double Click on Software Component, On Right Hand side >Go to Software Component Version->Delete the software component.If all the necessary Objects have been properly deleted, there will be no problem in Deleting the Software Componet version
    1) Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, and Interface Mappings.
    2) There should be no Imported SAP Objects in the Software Component. If any delete them and activate changes.
    3) Delete all namespaces in the editor using sign. Do not save the changes.
    4) Delete the two default data types that are created in the Interface Objects-->Data Types of the software component version (ExchangeFaultdata, ExchangeLogdata). Now save changes for the s/w component version and activate the changes. Ignore the warnings that pop-up.
    5) The radio button for u201CInterface import should be at u201CNot permittedu201D instead of u201CImport RFC and IDoc Interfaces from SAP Systems Permittedu201D.
    6) Now go to Software component version menu in the right hand pane. Click on delete and the software component vanishes from left hand pane 
    >> Is there any shortcut isntead of deleting all objets manuually?
    NO.. other way or any any shortcut for this
    Abid

  • Internal Error: Error in the Software Update Packa...

    hello,
    I'm using the latest Ovi Suite and N82 (v30). I saw notification of firmware update and then clicked to update it. the updated was downloaded but when it's in the process of updating it says
    Internal Error: Error in the Software Update Package Configuration
    I've replugged my device after the system restart but it shows the same.
    how do resolve it? neither do i see any option of redownload the update package. where does it download the update package?
    thanks

    And whatmake you think this is going to help? The answer from local Nokia Care Pointwas: “if you hit the phone it might be the reason for this problems and we arenot responsible for warranty void for your Nokia phone blah blah – of course Idid not hit or throw the phone but never mind – the just don’t care. Thisproblems was described in details to Nokia Care Point Finland and the answerwas … “ we are very sorry, but you need to make a connection with your localNokia Care Point” ha ha – thank you very much, they were so helpful ! That’swhy I don’t want to call or connect Nokia anymore – no help at all! Sorry ifthis information is not good for you, but it is true! Don’t believed it : check THREAD ID:1-4N513T0 from 06.January and THREAD ID:1-4N0DM6A from 05. January. That’s why I need User help, notNokia help.

  • Failed to sync update 4d81de56-2aac-433b-85f1-44b464cd09aa. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById $$ SMS_WSUS_SYN

    Hi I had to recover my SCCM media server from SQL and now having trouble to install Windows Update. When I deploy Windows Update, I can see status is "UKNOWEN".
    I feel like something to do with WSUS/SQL/SCCM media server syncing issue.. But I can't point out that trouble setting to fix it. I have checked and make sure, there is no proxy setting in IE and SUP.
    In the wsyscmgr.log is saying it is having syncing issue.
    sync: SMS synchronizing updates, processed 32400 out of 34494 items (93%), ETA in 00:05:43  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:39:14.008-600><thread=1788 (0x6FC)>
    Failed to sync update 4d81de56-2aac-433b-85f1-44b464cd09aa. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014
    13:39:43.847-600><thread=1788 (0x6FC)>
    Failed to sync update 5357f0f8-dc7c-467c-8d8d-ea4d6345260c. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014
    13:39:46.063-600><thread=1788 (0x6FC)>
    sync: SMS synchronizing updates, processed 33158 out of 33248 items (99%), ETA in 00:00:14  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:14.129-600><thread=1788 (0x6FC)>
    sync: SMS synchronizing updates, processed 33252 out of 33252 items (100%)  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:14.733-600><thread=1788 (0x6FC)>
    sync: SMS synchronizing updates, processed 33252 out of 33252 items (100%)  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:14.733-600><thread=1788 (0x6FC)>Sync failures summary:  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:14.733-600><thread=1788
    (0x6FC)>
    Failed to sync update 4d81de56-2aac-433b-85f1-44b464cd09aa. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014
    13:40:14.734-600><thread=1788 (0x6FC)>
    Failed to sync update 5357f0f8-dc7c-467c-8d8d-ea4d6345260c. Error: The Microsoft Software License Terms have not been completely downloaded and cannot be accepted. Source: Microsoft.UpdateServices.Internal.BaseApi.LicenseAgreement.GetById  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014
    13:40:14.735-600><thread=1788 (0x6FC)>
    Sync failed: Failed to sync some of the updates. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:15.513-600><thread=5504 (0x1580)>
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=S-Syd-SCCM.xxx.xxx SITE=SYD PID=10652 TID=5504 GMTDATE=Mon Jun 23 03:40:15.513 2014 ISTR0="Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates"
    ISTR1="Failed to sync some of the updates" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014
    13:40:15.514-600><thread=5504 (0x1580)>
    Sync failed. Will retry in 60 minutes  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:15.536-600><thread=5504 (0x1580)>
    Setting sync alert to active state on site SYD  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:15.536-600><thread=5504 (0x1580)>
    Sync time: 0d01h31m49s  $$<SMS_WSUS_SYNC_MANAGER><06-23-2014 13:40:15.551-600><thread=5504 (0x1580)>
    I am getting event ID 6703.
    I have checked and make sure, there is no proxy setting in IE and SUP.

    Hi,
    I saw someone use the following steps to fix this issue.
    1. Unselect all Classisfications in SUP
    2. Run wsusutil reset
    3. Run another sync
    4. Add Classifications
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • TS1717 Having trouble running iTunes version 11.0.2 on a Dell Laptop running Windows 7 Professional Service Pack 1.  Keep getting an error message "the software required for communicating with iPods and mobile phones was not installed correctly..." reinst

    Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1).  I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly.  Do you want iTunes to try to repair this for you?  I normally respond with OK and it immediately tells me "could not be repaired.  Please reinstall iTunes..."  I have done this a number of times to no avail.

    I also notice Quicktime is not getting installed at all.
    That one is normal nowadays (ever since the iTunes versions 10.5.x).
    The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

    Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

    The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod.  The iCloud backup and restore took a long time, but worked.  I was very grateful.
    Trying again to backup to iTunes locally proved to be the same challenging problem.  The same backup to corrupt file was the message.  The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error. 
    When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy.  Any restore would need to be from the iCloud which already worked but isn't the final solution.
    Your suggestions were good, I am just in the same boat.  Any thoughts about doing the following?
    1) creating a cloud backup
    2) resetting the iPod to factory defaults
    3) removing all traces of iTunes from my computer and
    4) installing iTunes and setting up iPod from scratch.
    This is the next thing on my list.

  • HT4623 I tried to update my ipad air to IOS 7.1 but it shows error that "The software for the iphone was corrupted during download" How can I fix this problem ?

    I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
    How can I fix this error ?

    I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
    In the terminal (it kept failing to download in Safari):
    curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
    Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
    Quit and relaunch iTunes.
    Should now work for you.

  • There were errors installing the software

    Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
    Ser: YM6***TAB
    <Edited by Moderator: Personal Info - Please See Terms of Use>
    Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
    First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
    Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
    However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
    I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
    I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
    http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
    (I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
    I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
    After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
    http://www.amstard.co.uk/temp/screenphoto.jpg
    There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
    It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
    I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
    I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
    I have "zapped the PRAM" without making any difference to this symptom.
    I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
    Any suggestions - apart from "scrap it!"?
    Martin (UK)

    It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
    I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
    I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
    Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
    If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
    Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
    With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
    On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault!

  • There were errors installing the software  Os x disk 2

    Hey guys.
    I run an older version of os x (10.4.8) on a Macbook as I have an old version of pro tools that I won't run on anything newer. I havn't gotten round to updating pro tools.
    Yesterday, I tried to install the update for 10.4.11 since I'm not too bothered about pro tools anymore.
    It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
    After this, everything froze and I was forced to manually restart the macbook using the power button.
    When restarting, I got a kernel panic error which asked me to repeatedly start the system.
    Fed up with this, I decided to revert back to 10.4.8 by booting from the dvd, erasing the macbook harddrive and installing from scratch.
    Disk one went fine, but disk 2 hangs up when installing garage band instruments, then I get the message THERE WERE ERRORS INSTALLING THE SOFTWARE. PLEASE TRY AGAIN.
    I've tried this three times with no joy.
    Any ideas?
    Thanks

    Hi Ibin5, and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
    Hmmm, that's too long, might see this...
    http://www.apple.com/support/macbook/hd/repairextension/
    Also, That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
    http://support.apple.com/kb/HT1442

  • Error -20023 internal software error

    Hola a todos. Soy un nuevo usuario del labview y mientras intento aprender algo me he topado con un error que no entiendo a la salida de un filtro:
    Software error ocurred in no asociated comand id on axis control error -20023 internal software error please contact ni for suppor
    Lo que hace el programa no es problema. La cosa es que si quito el filtro funciona bien.
    Para hacerlo funcionar utilizamos una señal simulada de una 9239 creada con MAX.
    Si alguien puede darme alguna idea, se lo agradeceré un monton.
    Attachments:
    prueba3.vi ‏291 KB

    Hola Gonzalo el código de error es de un filtro y el VI que estas utilizando para interpretar los errores no te da una descripción adecuada porque ese es para Motion, y en este caso no lo estas usando por eso la descripción del error no tiene sentido.
    Aquí el erro puede ser por poner rangos inválidos en la frecuencia de muestre, o corte, o debido a que no hay información en el waveform. La siguiente liga tiene mas información:
    http://digital.ni.com/public.nsf/allkb/ABBD3A7BC25E17C8862561270058A4A0?OpenDocument
    Saludos
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • I tunes 11 will not let me sync my I pod nano... keep getting error meessage:  the software required for this I pod was not installed correctly... I have tried to reinstall 6 times Dumped everything i tunes related no luck help!

    I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software.  I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

    I recently updated to Itunes 11 and now no sync... get error message: The software required for this I pod was not installed correctly. Please reinstall Itunes to install the required software.  I backed up all music and deleted all related itunes items and still get this error after 6 attempts to reload itunes... i give up please help

  • Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating.

    Error message hkey_local_machine\software\classes\itunes.aifc keeps appearing when updating.  Then update uninstalls.  I was trying to fix a missing driver error.

    Press WinLogoKey+R to open the Run... dialog box
    Type in Regedit and press enter/return
    Tap the plus symbol next to HKEY_LOCAL_MACHINE
    Tap the plus symbol next to SOFTWARE
    Press C on the keyboard, then again or scroll down until Classes is selected
    Tap the plus symbol or use the right-arrow key to open the branch
    Press i on the keyboard, then use the Page Down key, scroll bar or arrow keys to locate iTunes.aifc
    The registry editor should now look something like this: (Click to enlarge)
    Right-click on the iTunes.aifc key and click Permissions... to see what is going on. My current permissions for the iTunes.aifc key are shown below: Giving Administrators and/or yourself Full Control should be enough to let the installer make changes. Alternatively you could delete the key and let the iTunes installer recreate it.
    tt2

  • Error found in Software Distribution log

    I found below error in my software distribution log. I think it is related to WSUS and many comptuers are not getting proper patches. Any resolution is really appriciated
    2014-11-24 15:27:26.773 UTC    Warning    w3wp.325    SoapUtilities.CreateException    ThrowException: actor = http://xxxx.xxxx.xxxx.com:8530/ClientWebService/client.asmx, ID=e5cd4691-63d8-4740-b5a6-f732027896db,
    ErrorCode=ConfigChanged, Message=, Client=e78cd58f-cb87-4829-945d-d5ab39d8486d

    What do you mean of "not getting proper patches"?
    Did these clients fail to update with any error code?
    Almost certainly the above log entry is occurring in combination with an 0x8024400D error code ... a very common manifestation of duplicated SusClientIDs.
    The log snippet on the client side would look something like this:
    2012-02-09 10:02:34:595  948 1994 PT WARNING: SyncUpdates failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2012-02-09 10:02:34:595  948 1994 PT WARNING: SOAP Fault: 0x00012c
    2012-02-09 10:02:34:595  948 1994 PT WARNING:     faultstring:Fault occurred
    2012-02-09 10:02:34:595  948 1994 PT WARNING:    
    ErrorCode:ConfigChanged(2)
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     Message:(null)
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/SyncUpdates"
    2012-02-09 10:02:34:596  948 1994 PT WARNING:     ID:6b1c0796-e40b-4800-a3c9-d75624d59acf
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • An error occurred while software update and now can't get emails either

    Please Help, an error occurred while software update (unable to update) and now I can't get my emails either.

    I figured it out....I had downloaded and deleted my photos.  then I was able to upgrade...easy!

Maybe you are looking for