Error during Demo Application initialization

After the proper installation of the Headstart 2.1.2 and the
Patch 10 against Designer & Developer 6.0 I tried to start the
Demo Application and I receive the following message :
tProcedure QMS$INIT_APPLICATION is missing in your application
library, or the application library is not attached before
library qmsevh50v . Why ?
Thank you
null

Lucian,
Open form hsd21\hst\demo\hsd0000f.fmb in Forms 6.0. Look at the
list of attached libraries. The library hsdapp10 should be
attached, and specifically it should be attached before qmsevh50.
If you find the library there and in the correct position, you
should open hsd21\hst\demo\hsdapp10.pll and see if the procedure
qms$init_application is not compiled or is missing. If not
compiled, re-compile and save the library. If missing, restore
hsdapp10.pll from patch 10.
Regards,
Lauri
Lucian Calciu (guest) wrote:
: After the proper installation of the Headstart 2.1.2 and the
: Patch 10 against Designer & Developer 6.0 I tried to start the
: Demo Application and I receive the following message :
: tProcedure QMS$INIT_APPLICATION is missing in your application
: library, or the application library is not attached before
: library qmsevh50v . Why ?
: Thank you
null

Similar Messages

Error during SP application.'TP CONNECT SID ' returns ORA-03114 error.

Hi All,
Last week we were applying an Add-On SAPK-510AGINAIN. It was running in
phase IMPORT_PROPER for more than 10 hours without any update in logs.
So I went into SM50 cancelled the work processess. From then when I continue the Add-on installation, I get an error 'TP_CANNOT_CONNECT_TO_SYSTEM' and tp return code 230. When I see
the SLOG, it says R3trans cannot create a process. When I tried
doing 'tp connect PI7 pf=<profile name>, I get a error 'ORA-03114- NOt
connected to ORACLE' and also some SQL Query with ddntt table and few entries.
I also did a DBCHECK, the ABAP Dictionary is consistent with the
Database.Also I suspect the nametab entries should have been
inconsistent state when I killed the work process manually..
Regards
Thilip Kumar

Hi Juan,
Oracle did not go down during SP application.. R3trans -d works fine and also the Transport tool tp check also is fine.. I have even upgraded the kernel to the latest level. STMS is configured for Single system landscape and it is also very well fine..
Please see the output of 'tp connect PIX pf="<TP_PROFILE_>"
TRACE-INFO: 337: [dev trc     ,00000] SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
TRACE-INFO: 338:                                                                                30 0.356722
TRACE-INFO: 339: [dev trc     ,00000] NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
TRACE-INFO: 340:                                                                                27 0.356749
TRACE-INFO: 341: [dev trc     ,00000] AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20 0.356769
TRACE-INFO: 342: [dbntab      ,01003] ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
TRACE-INFO: 343:                                                                                38 0.356807
TRACE-INFO: 344: [dbntab      ,01003] ***LOG BY0=>ORA-03114: not connected to ORACLE [dbntab#6 @ 10038]
TRACE-INFO: 345:                                                                                31 0.356838
TRACE-INFO: 346: [dev trc     ,00000] OCI-call failed with -1=OCI_ERROR                             299 0.357137
TRACE-INFO: 347: [dev trc     ,00000]     SQL error 3114: 'ORA-03114: not connected to ORACLE'        24 0.357161
TRACE-INFO: 348: [dbsloci.    ,00000] *** ERROR => Error 3114 in stmt_fetch() from oci_execute_stmt(), orpc=1
TRACE-INFO: 349:                                                                                35 0.357196
TRACE-INFO: 350: [dbsloci.    ,00000] *** ERROR => ORA-3114 occurred when executing SQL stmt (parse error offset=0)
TRACE-INFO: 351:                                                                                33 0.357229
TRACE-INFO: 352: [dev trc     ,00000] sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT
TRACE-INFO: 353:                                                                                34 0.357263
TRACE-INFO: 354: [dev trc     ,00000] SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
TRACE-INFO: 355:                                                                                31 0.357294
TRACE-INFO: 356: [dev trc     ,00000] NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
TRACE-INFO: 357:                                                                                30 0.357324
TRACE-INFO: 358: [dev trc     ,00000] AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20 0.357344
TRACE-INFO: 359: [dev trc     ,00000] sc_p=0x110cc4770,no=3,idc_p=0x110cdd560,con=0,act=1,slen=238,smax=256,#vars=1,stmt=0x110fe94e8,table=DDNTT
TRACE-INFO: 360:                                                                                98 0.357442
TRACE-INFO: 361: [dev trc     ,00000] prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=(nil),ocistmth_p=0x110fe9ec0
TRACE-INFO: 362:                                                                                33 0.357475
TRACE-INFO: 363: [dev trc     ,00000] IN : cols=1,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=4294967295,rsize=60,vmax=32,bound=1,iobuf_p=0x110fb1468,vda_p=0x110feb8c8
TRACE-INFO: 364:                                                                                34 0.357509
TRACE-INFO: 365: [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
TRACE-INFO: 366:                                                                                31 0.357540
TRACE-INFO: 367: [dev trc     ,00000] OUT: cols=21,rmax=1,xcnt=1,rpc=1,rowi=0,rtot=1,upto=4294967295,rsize=218,vmax=32,bound=1,iobuf_p=0x110e0d4e8,vda_p=0x110fec028
TRACE-INFO: 368:                                                                                34 0.357574
TRACE-INFO: 369: [dev trc     ,00000]       lobs=0,lmax=0,lpcnt=0,larr=(nil),lcurr_p=(nil),rret=0
TRACE-INFO: 370:                                                                                31 0.357605
TRACE-INFO: 371: [dev trc     ,00000] SELECT VERSION, UUID, CRTIMESTMP, ABTIMESTMP, DYTIMESTMP, FLDCNT, TABLENGTH, KEYCNT, KEYLENGTH, CLIE\
TRACE-INFO: 372:                                                                                30 0.357635
TRACE-INFO: 373: [dev trc     ,00000] NTPOS, TABTYPE, TABFORM, REFNAME, HFLAG, BUFSTATE, BUFPARM, ALIGN, POINTERLG, UNICODELG, COMPCNT, LE\
TRACE-INFO: 374:                                                                                31 0.357666
TRACE-INFO: 375: [dev trc     ,00000] AFCNT FROM "DDNTT" WHERE TABNAME = :A0;                        20 0.357686
TRACE-INFO: 376: [dbntab      ,01003] ***LOG BY4=>sql error 3114   performing SEL on table DDNTT      [dbntab#6 @ 10038]
TRACE-INFO: 377:                                                                                38 0.357724
Also the are no dumps as well as system logs for the issue..
Regards
Thilip Kumar
Edited by: Thilip Kumar on Dec 23, 2008 3:44 PM
Edited by: Thilip Kumar on Dec 23, 2008 3:45 PM
Edited by: Thilip Kumar on Dec 23, 2008 3:46 PM

Error during running application

Hi Folks,
I have developed CustomerProject having a servlet looking up CustomerSession bean calling CustomerEntitybean.
For developing this I used Netbean5.0 and SunoneApplicationserver8.2.After building this when I run the application for first time.It worked well.When I added some more business methods in the bean and started running its giving the following error.Please help me what might be the problem.How to solve it
[b][#|2006-05-23T13:09:03.613-0500|WARNING|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5021: Application NOT loaded: [order]|#]
[#|2006-05-23T13:09:03.803-0500|INFO|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|Instantiated container for: ejbName: CustomerFacadeBean; containerId: 75261912075403265|#]
[#|2006-05-23T13:09:03.823-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|EJB5090: Exception in creating EJB container [javax.naming.NameAlreadyBoundException [Root exception is org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0]]|#]
[#|2006-05-23T13:09:03.823-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.container.ejb|_ThreadID=10;|appId=customerbook moduleName=CustomerBook-EJBModule_jar ejbName=CustomerFacadeBean|#]
[#|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5012: Jndi name conflict found in [customerbook]. Jndi name [ejb/CustomerFacadeBean] for bean [CustomerFacadeBean] is already in use.|#]
[#|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5013: Naming exception while creating EJB container:
javax.naming.NameAlreadyBoundException [Root exception is org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0 ]
at com.sun.jndi.cosnaming.ExceptionMapper.mapException(ExceptionMapper.java:74)
at com.sun.jndi.cosnaming.CNCtx.callBindOrRebind(CNCtx.java:563)
at com.sun.jndi.cosnaming.CNCtx.bind(CNCtx.java:588)
at javax.naming.InitialContext.bind(InitialContext.java:359)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManagerImpl.java:176)
at com.sun.enterprise.naming.NamingManagerImpl.publishObject(NamingManagerImpl.java:146)
at com.sun.ejb.containers.BaseContainer.initializeHome(BaseContainer.java:622)
at com.sun.ejb.containers.StatelessSessionContainer.initializeHome(StatelessSessionContainer.java:187)
at com.sun.ejb.containers.ContainerFactoryImpl.createContainer(ContainerFactoryImpl.java:287)
at com.sun.enterprise.server.AbstractLoader.loadEjbs(AbstractLoader.java:481)
at com.sun.enterprise.server.ApplicationLoader.load(ApplicationLoader.java:125)
at com.sun.enterprise.server.TomcatApplicationLoader.load(TomcatApplicationLoader.java:95)
at com.sun.enterprise.server.AbstractManager.load(AbstractManager.java:185)
at com.sun.enterprise.server.ApplicationLifecycle.onStartup(ApplicationLifecycle.java:200)
at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: org.omg.CosNaming.NamingContextPackage.AlreadyBound: IDL:omg.org/CosNaming/NamingContext/AlreadyBound:1.0
at org.omg.CosNaming.NamingContextPackage.AlreadyBoundHelper.read(AlreadyBoundHelper.java:60)
at org.omg.CosNaming._NamingContextStub.bind(_NamingContextStub.java:67)
at com.sun.jndi.cosnaming.CNCtx.callBindOrRebind(CNCtx.java:552) ... 15 more
|#]------------------------------------------------------------------------
Dont know where to bind or rebind if there is any naming exception.I just created service locator..but i dont know where to rebind it
Please help regarding this.Appreciate your time
Thanks,
Siris

The global JNDI name assigned to each Remote EJB in sun-ejb-jar.xml must be unique across all the applications deployed to the application server. This message shows that more than Remote ejb uses the global JNDI name "ejb/CustomerFacadeBean" :
#|2006-05-23T13:09:03.833-0500|SEVERE|sun-appserver-pe8.2|javax.enterprise.sys tem.core.classloading|_ThreadID=10;|LDR5012: Jndi name conflict found in [customerbook]. Jndi name [ejb/CustomerFacadeBean] for bean [CustomerFacadeBean] is already in use.|#]
Double-check all your sun-ejb-jar.xmls to remove the conflict , then undeploy all your apps and deploy again.
--ken

Error during testing Application Module in JDeveloper 11.1.1 Tech Preview 3

I am successfully using Jdeveloper 10.1.3 version
now i am trying to use new JDeveloper version 11.1.1 but i am initially get this error while i am trying to test my buisness components.
When i test my buisness components first time i got this error
ORA-01866: the datetime class is invalid
and on same window when i click on re-execute query on context menu of any view object it gives an proper output.
so plz try and find the solution i am stuck up here,
how can i go ahead when initially buisness component want work ??
Thank In Advance
Jaydip Bosamiya

Hi,
are you running an application you migrated from 10.1.3 to 11, or is it one that you created in JDeveloper 11. If its a migration case, can you try and re-create the part of the module in JDeveloper 11 to see if this reproduces. To me this sounds like a migration issue. Once you verified this, can you post the reply on JDeveloper and OC4J 11g Technology Preview
which is the JDeveloper 11 forum?
Frank

Getting compile time errors during gwt application compilation

Hi,
I am getting below compile errors while running ant script for my GWT application.
javac:
[javac] Compiling 32 source files to D:\Projects\workspace\MckSurvey\war\WEB-INF\classes
[javac] D:\Projects\workspace\MckSurvey\src\com\spinsci\survey\client\model\QuestionBean.java:38: type parameters of <X>X cannot be determined; no unique maximal instance exists for type variable X with upper bounds int,java.lang.Object
[javac]           return get("questionId");
[javac] ^
I am using JDK 1.6 and ANT 1.7 s/w.
below is the target which is used in the build file:
<javac srcdir="src" includes="**" encoding="utf-8"
destdir="war/WEB-INF/classes"
nowarn="true"
debug="true" debuglevel="lines,vars,source"
     includeDestClasses="false"
     source="1.5" target="1.5"
          >
<classpath refid="project.class.path"/>
<compilerarg value="-Xlint:-unchecked"/>
</javac>
Please suggest me accordingly to overcome this generics compile time errors.
Regards,
Sunder.

dannyyates wrote:
There are/have been numerous examples of differences in spec interpretation between Eclipse (ecj) and the Sun compiler. I generally find that Eclipse is more accurate in it's interpretation than Sun! :-)
I would suggest raising this on an appropriate Eclipse forum. The guys there are normally very good at digging into the issue and explaining why they think they are right or else admitting that they've got it wrong.I totally agree on both accounts. I myself have seen at least two compiler bugs and asked both the Sun guys and the Eclipse guys (through their respective bug tracking systems) and both have been resolved (in both cases ecj was actually right, but I wouldn't dare drawing any conclusions from that ;-)).

Error during build application

Software - Labview 7.1 PDA and Labview DSC 7.1
OS - WIndows XP.
When I try to build application in Labview 7.1 I get following error
"Error 7 occured at Build Application. vi >> Disk Cmp setting to disk hier.vi >> Dist report Read Link Error.vi."
Can anyone had idea why this error had come.
Regards
Uttam

Hi,
Try mass compiling your VI once before building the EXE
Tools»Advanced»Mass Compile
this link will explain how to mass compile.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/aa97c01071d7cf678625695100582f40?O...
Hope this helps
Regards
Dev

Error during loading of initialization data for 0ic_c03

Hi
I am setting up the inventory cube 0IC_C03 for stock reports. I am following the document How to Scenarios for inventory management.
I have made the necessary preperations in the R/3 side. The setup tables have been populated and the data is visible using rsa3.
Now in BW i have created infopackages for the 3 data sources 2LIS_03_BX / BF / UM.
For 2LIS_03_BX the update status is generate initial status
For 2LIS_03_BF the update status is initialize delta process
For 2LIS_03_UM the update status is initialize delta process
I am now trying to upload the data for stock initialization by scheduling the 2LIS_03_BX infopackage for an immediate pull. However in the manage are there are no records being transferred (0 of 0 records) and the status of the request is yellow.
Is there some interim step that i am perhaps missing?
Regards
Pranav

Hi AHP / Aby
The update was going on for an elongated period of time so I set the QM status to red and have restarted the data pull. This time the data did come to the BW system but still showed an error.
The details panel shows the following information
> Overall status : Errors occured or missing messages
> Requests everything ok (green light)
>Extraction : Errors occured (yellow light)
>>25000 records sent (yellow)
>>22115 records recieved (green)
>Transfer (Idocs and TRFC) Errors occurred
>> Data package1 :25000 records arrived in BW (green light)
>> Data package 2 : arrived in BW. Data records for package 2 in PSA-1 er (red light)
>Processing (Errors Occured) (red)
>> Data package1 (25000 records):missing messages (yellow)
>>>update PSA (25000 records posted) : no errors (green)
>>>transfer rules (25000 records >25000 records) : no errors (green)
>>>Update rules (25000 >39027 records): no errors (green)
>>> Update (0new/0 changed) Warning recieved(red)
>>>>Data records for package 2 selected in PSA 1 error
>>>>>>>> record 1965 : value of characteristic 0batch contains invalid number
>Processing End : Errors occured
>> Error 4 in the update
According to my understanding of the situation there is a data error in the record 1965 in the second package. Is it possible / advisable to go an edit this in the PSA? If not then what is the procedure to be adopted. Since this is an initiallization and not a delta update i am not sure whether i should pull this again!
Thanks in advance and for all the help so far! its really appreciated!
pranav

Mac OS 10.5.6 Tung C - Unknown error during sync - application closes

Since my recent 10.5.6 update I am unable to complete my sync.
Everything initiates fine. Several items seem to initiate but when it starts my epocrates sync the software closes with an unknown error. I have reinstalled mac 421RevD twice with no change.
Please help.
Thanks
Post relates to: Tungsten C
Post relates to: Tungsten C

How about try to disable the two Epocrates conduits from the Conduit Settings of the Hotsync Manager? This would really isolate whether its a Palm or Epocrates issue. You may try to consult with Epocrates support if ever it would sync sucessfull without the two conduits activated.
Post relates to: Palm m105

BEx Excel performance improvements - error during install/application

Hi all,
We are testing the notes included in Mark Zuchowski's blog regarding improving performance of using BEx Excel in BI 70. We are on BI 70, SPS15.
We successfully tested in our sandbox system, but are having issues tesitng this in our dev system.
We aregetting the below error when attempting to filter/restrict on an infoobject in the Query Designer. We have reviewed the applied notes at least 5 times, but cannot find the issue. We believe we have applied the notes successfuly, but cannot find root cause to this issue.
Error message is as follows:
System error in cl_rsr_xls_workbook and form get_definition:01
Any thoughts? SAP message is 95167.

we found inactive include pgms...shame on us...
issue closed.

Error during channel initialization

Hi all,
Iam trying JMS->XI->FILE scenario. Iam using sonicMQ and have finished the scenario. I have added sonic-client.jar in the provider.xml and deployed the required sda file. Now when i try to execute the scenario iam getting the following error in communication channel monitoring.
Error during channel initialization...
Can anyone throw some light on how to solve this error.Any help on this will be appreciated.
Regards,
Sudheer.

HI,
I have looked at the log file at the location specifies by you. Even there it says the same thing.Iam not able to figure out any thing from it.Please tell me if you know about it.
#1.5#00163500DB18004B000000980000250C000416D019B37FA6#1150982947104#/Applications/ExchangeInfrastructure/AdapterFramework/Services/JMS_ROOT##com.sap.aii.af.service.jms.WorkerImpl.start()#J2EE_GUEST#0####148d320201f311db8f6900163500db18#output##0#0#Error#1#com.sap.aii.af.service.jms.WorkerImpl#Java###Channel is errornous, hence it cannot be started. See error messages (' Error during channel initialization; exception trace: ') before. Reconfigure it or restart the JMS service!#1#JMS_in_SimpleMessage#
Regards,
Sudheer.

Oracle Fusion Order Demo Application For JDeveloper error

HI,
i try to run the (Oracle Fusion Order Demo Application For JDeveloper) Fusion Order Demo (FOD) is an end-to-end application sample :
when i try to : Right click build.xml and choose Run Ant Target > buildAll . error coming
Buildfile: C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml
init:
[javac] Compiling 1 source file to C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\classes
setProperties:
createDatabase:
refreshSchema:
BUILD FAILED
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\Ant\build.xml:51: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:100: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:63: The following error occurred while executing this line:
C:\JDeveloper\FusionOrderDemo_R2_1_revised\Infrastructure\DBSchema\build.xml:28: C:\Oracle\Middleware\jdeveloper\wlserver_10.3\server\lib not found.
Total time: 6 seconds
how i can run the build.xml

Hi,
not quite sure the question is clear. The add cart command is a link defined in the JSPX file
<af:commandLink partialSubmit="true"
actionListener="#{shoppingCartBean.addItemToCart}"
id="cl3">
that points to
public void addItemToCart(ActionEvent evt) {
Map attributes = evt.getComponent().getAttributes();
invokeUpdateOp(new Integer(attributes.get( PRODUCT_ID_COL )+ ""));
in StoreFrontModule\StorefrontUI\src\oracle\fodemo\storefront\cart\view\managed\ShoppingCartBean.java . This is where you follow up then.
+"how i can make Repetition for the items in home.jspx"+
I can only assume you mean how to create the catalog items. Here I suggest you look at the demo source as this is what the demo is for. If you are new to ADF, I recommend that you first run a tutorial from here
If you are on 11g R1: http://www.oracle.com/technetwork/developer-tools/jdev/overview/index-100269.html
If you are on 11g R2: http://docs.oracle.com/cd/E18941_01/tutorials/toc.htm
No demo can replace proper learning, to be honest
Frank

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Error in loading demo application

Hi ,
I tried in loading the issuer tracker demo application as per directions in the read me file.
When I tried to import the sql through application express instant , I am getting the error as shown below.
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-20001: The procedure remove_flow was called without a value for p_id -- a application ID must be provided. <pre>begin -- Remove Application wwv_flow_api.remove_flow(); end; </pre>
Any one has idea's.
Thanks
MA.

I'll take a guess here.
I'm thinking your phrase "import the sql through application express instant" means that you're taking the SQL script and attempting to execute it in SQL Script or SQL Commands in the SQL Workshop.
If that is the case, then that's your error. You simply want to import this as an Application in Application Builder.
Joel

Error while executing the DEMO application of ADS

Hi,
I have installed a sneak preview version of Java stack 7.0. With that I have downloaded the latest credentials for Adobe Document Service from the SDN and followed these steps to configure it.
Copied the .pfx file to <INST_DRIVE>:\usr\sap\J2E\SYS\global\AdobeDocumentServices\TrustManagerService\trust\credentials.
Logged into visual admin .
On the Cluster tab, choose Server 0 -> Services -> Document Services Configuration
On the Runtime tab, select Credentials
Choose Browse to search for the name of the credential and then Select
In the Alias field, enter the alias of the credential you installed, for example ReaderRights. (Entries for the name of the credential are case-sensitive)
In Password field, enter the password you received together with the credential you installed (filename.txt in the archive). Confirm the password again and then click Add
Restart the following services for the changes to take effect: PDF Manipulation Module, Document Services Trust Manager. To perform this, right-click on the repective service choose Stop and after the service has stopped, Start it again
Restart also the application com.adobe/AdobeDocumentServices located at Server 0 -> Services -> Deploy (radio button Application)
I can execute the web service of ADS sucessfully using the URL: http://localhost:50100/AdobeDocumentServices/Config. I am getting response with version number.
After doing so I tried executing the DEMO Application from the link :
http://localhost:50100/webdynpro/dispatcher/local/TutWD_OnlineInteractiveForm/OnlineInteractiveFormApp
But the applicaiton was not getting executed.
I got the following error.
java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
    at java.net.Socket.connect(Socket.java:464)
    ... 47 more
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to UPDATEDATAINPDF
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:396)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:711)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:665)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:232)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:341)
     ... 29 more
Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Service call exception; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:382)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.render(PDFObject.java:3710)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:139)
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
     ... 32 more
Caused by: java.rmi.RemoteException: Service call exception; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:89)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:99)
     at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:359)
     ... 35 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:464)
     at java.net.Socket.connect(Socket.java:414)
     at java.net.Socket.<init>(Socket.java:310)
     at java.net.Socket.<init>(Socket.java:125)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initStreamsFromSocket(HTTPSocket.java:648)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.initializeStreams(HTTPSocket.java:470)
     at com.sap.engine.services.webservices.jaxm.soap.HTTPSocket.getOutputStream(HTTPSocket.java:427)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.HTTPTransport.getRequestStream(HTTPTransport.java:355)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.outputMessage(MimeHttpBinding.java:548)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1425)
     at com.sap.tc.webdynpro.adsproxy.ConfigBindingStub.rpData(ConfigBindingStub.java:82)
     ... 37 more
Does it mean that my ADS is not configured properly? Did I missed any step.
Kindly guide me on the same.
Thanks in advance.
Regards,
Nirmal G

Hi Nirmal,
Refer to this https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/06717aea-0c01-0010-b28f-e6494458788f guide to see if you have done all the settings.
Regards,
Arafat

6.0.3 Error During Disc Initialization for both DVD+R and Disc Image - Help

I've been a mac user for a few years now, but I just bought a new MacBook, and my first superdrive! I'm all excited to test out the new hardware along with iDVD.
I've made a rather simple DVD setup and the first time through it was encoding for about an hour and then it gave an error message which I don't recall other than it mentioned QT7. I ran updater, no new updates that I needed and I tried again, and from then on I've been getting the Error During Disc Initialization message when burning to my DVD+Rs or when I try and save as a disc image (yes, I've deleted the encoding assets). I have about 20GB free on HDD, and I'm trying to burn approx. 100min of video. I've rebooted multiple times, and I've remade my project a couple times but no dice.
Any idears?
Mac OS X (10.4.8)

What hardware do you have???
You didn't answer Sue's question about free space on
your start-up drive. You should have 20GB+ free.
What are you sending to iDVD?
Verbatim DVD-R, not DVD+R, are very reliable, unlike
TDK and Memorex.
Also look here:
http://docs.info.apple.com/article.html?artnum=302925
I am running on a 2.0 ghz MacBook with a SuperDrive using Sony DVD+R. I will definitely pick up some Verbatim DVD-Rs though to see if that makes iDVD happy.
I have cleared up some room and now I have around 50GB free.
I am trying to make a DVD of two seperate .mp4s of a soccer game. I have 3 pictures and two buttons.

Error during Demo Application initialization

Similar Messages

Maybe you are looking for