Error during dunning smart form execution
Hello Experts,
I have a requirement to develop a smartform for dunning when i copied the standard program 'F150_DUNN_SF' and made some changes to windows and tried executing it.Its throwing me an error 'Printing dunning notices using SMARTFORMS,error during parameter transfer' i am wondering how to find the error. Even in F150 also its showin an error saying 'Form XXX language EN is not active and has no errors'.Please let me know how i can solve this erros.
Thanks,
Vijay Simha CR
Hi,
Did you copied that from 000 client and select the language en.If this is already done then please check the configurations settings.if still there is any issue please post.
Regards,
Madhu.
Similar Messages
-
Oracle Collaborate Suite ORA-6502 error during loging or form submitting
Hi!
I had Oracle Collaborate Suite ORA-6502 error during loging or form submitting:
Internal error (WWC-00006)
An unexpected error has occurred (WWS-32100)
ORA-6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWC-36000)
Unexpected error encountered in wwsec_api.person_info (ORA-06502: PL/SQL: numeric or value error: character string buffer too small) (WWC-41417)
Error (WWS-20000)
An unexpected error has occurred (WWS-32100)
ORA-6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small (WWC-36000)
Unexpected error encountered in wwsec_api.person_info (ORA-06502: PL/SQL: numeric or value error: character string buffer too small) (WWC-41417).
This happened when:
I was using Russian letters in OCS HTML forms (for example - in Administration provision console or in my own HTML forms)
and only I work in Linux (with UTF-8 encoding) (in Windows with win1251 encoding all is OK).
My Database NLS not-null Parameters are:
NLS_LANGUAGE - AMERICAN
NLS_LENGTH_SEMANTICS - BYTE
NLS_TERRITORY - AMERICA
NLS_CHARACTERSET - AL32UTF8
NLS_NCHAR_CHARACTERSET - AL16UTF16
WHAT MUST I DO TO AVOID THIS SITUATION?
Thank
ValeryAll,
It appears that the page Javascript maximum limit size was reached. The error stopped appearing after some of the page Javascript code was removed out to Application Static Files. I wonder if there exists any "direct" indicator by the system whenever the size limit has been reached?
Again, the run error only occurred when the page was loaded in "Debug" mode.
Bernard -
Domain creation error during installation of forms 11g
Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
here is the error portion from installation log
----- **************** log *****************************-------------------------------------------------------------------------------------------------
Entering windows
OneoffTool Script Location: C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
OPatch failed with error code = 1
stderr=[java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
sbStderr.length():891
[Applying patch f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip and the java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
----- **************** log *****************************-------------------------------------------------------------------------------------------------user2040934 wrote:
Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
You have the wrong Java version installed. Do you already have another Forms version installed (like Forms 10g)? I ask this because Java 1.4.2_06 installs with the Oracle Developer Suite 10g. For Fusion Middleware 11g (Forms 11g) you need to have Java 1.6 installed. If you already have Java 1.6 installed, then you will need to modify your System PATH so that it lists Java 1.6 before Java 1.4. The error you are getting, "stderr=[java.lang.UnsupportedClassVersionError" is because Java 1.4 doesn't support the method the installer is using. Run the following command from a Command/Dos window: "Java -version". If it does not show Java 1.6.0_??, then your PATH is still not setup correctly or you don't have Java 1.6.0 installed.
Craig... -
Error during the adobe form activation
hi all,
when am i activate the adobe form layout (Zlayout) , the following error message occured:
Error during activation
Message no. EU837
but iam not found any syntax error in layout development.
please help in this it very urgent....
Thanks,
RamanaHello Sir,
You need to apply the note 1047930, After this the problem should be resolved.
Thanks and Regards,
Deepak... -
Hi,
when execute the program to show smart form, it comes up with error "Output could not be displayed (it may not be complete)"
can you please let me know the reason for this error and how to resolve it?
waiting for kind replies...
Regards
Shabbarcheck whether there any run ttime errors on the form..
open the Tcode..SFTRACE.. then activate Trace. in one session.. after this .. in onother session Run the form... after u gettin the errror... come back to SFTRACE... press Refresh button on the bottom.. then
u'll find the 1 entry with today date and u r user name... select that press on Display... u'll find the wexact problem..
the problem colud be lay out
Message was edited by:
Naresh Reddy -
FormsServlet Error during opening of form in Internet Explorer
Hi
I have installed Database10g Rel2 in my system. After that i installed Developer suite suite 10g Rel2 into same PC. this is for personal use on single PC.
But when i opened the form builder and runing one form made on same 10g forms during applet initialization it gives an Internet Explorer error and closes the form.
in OCJ4 it gives test = False.
Please Help.
SaeedIf the browser is crashing, the problem is likely related to a JRE conflict. If you have any Sun JRE/JPI installed and running, then try to run a form with Oracle Jinitiator, the browser will crash. We have also seen this problem when Jinit does not correctly install for one reason or another. Knowing this information would be helpful in us assisting:
- what operating system and version?
- which JRE/Jinitiator are you attempting to use?
- is the Sun JRE/JPI installed on this machine?
- did you install Dev Suite in the same home with the Database?
Things to be aware of:
Reference to "Home" is the same as "directory". You cannot install the Database in the same Home (directory) as Developer Suite. Each must reside in their own parent directory.
Internet Explorer 7 is NOT supported for use with Forms 10.1.2.0.2. Refer to the following for more details:http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html
Recommendations:
1. Close ALL open browsers
2. Uninstall Jinitiator and any Sun JRE (if installed)
3. Reboot
4. With ALL browsers closed, manually install the Jinitiator version configured in your formsweb.cfg
5. Retest. -
SMART FORMS execution time slow
Dear SAP,
We have been applying support packs to our system from last few days.
We have upgraded our ABAP and BASIS level from 10 to 17th Component.
It has been found that TCodes take time to Open for first time after
applying the components. In case of SMART FORMS the execution time
in every process is taking very long. This has been the case for very
long now. Kindly suggest what should be done to speed up the Process of
Working in Smart Forms.
- Jitesh
( Basis )Hi Njitesh,
After Upgrade you should run SGEN ( SAP Load Generator ), which will execute all the transactions once and makes the system faster.
Run the SGEN in the background mode, usually it takes a long time to compile all the objects.
Hope you get the solution.
Thanks
Arbind -
Hi All,
While executing the dunning run ( T-code FPVA ),
First i saved the dunning run ID.
When i scheduled it, iam getting error that
"There are no internal numbers which have not been assigned"
Can some one tell me where i have missed the configuration ?
Regards
HaricharanHaricharan,
Pls refer SAP Note 732878. You need to maintain no ranges using T-code 'SNUM' for EMMA_RUNID.
With out this, you get no ranges error for all mass programs like FPY1, FPMA, FPVA etc.
Hope this helps
Rgds
Rajendra -
Error while printing smart form..
Hi all,
I am getting an error while printing the invoice(smartform)
"Error in spool C call: Error from TemSe..."
it gives one pop also saying... Work process restarted; Session terminated.
How to solve it?
Thanks,
DarshanaHi,
Please refer to this link might help you.
http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm -
Error while Previewing Smart Form
Hi all,
I have created a smartform but I am not able to preview. It gives error that "Error generating the Test Frame".
Please provide help on this matter.
Thank YouHi Premal,
Is your Smartform successfully activated? That is, there are no syntex errors in the Smartform? Please check this and let us know.
Regards,
Saurabh -
Error during SWN _ SELSEN execution for exteneded mail notification
Hi,
I have configured all the requried settings for extended mail notification in SWNCONFIG. But when i execute SWN _ SELSEN I am getting an error'CX_OS_INTERNAL_ERROR'.
More details are below
"UNCAUGHT_EXCEPTION" "CX_OS_INTERNAL_ERROR"
"CL_OS_SYSTEM==================CP" or "CL_OS_SYSTEM==================CM00L"
"OS_GET_CLASS_AGENT_BY_REF"
Version : 2.0
Precondition : I_OBJECT is not initial and an instance of a
persistent class.
Postcondition : The class agent is active.
OO Exceptions : propagates GET_CLASS_AGENT, CX_OS_INTERNAL_ERROR
Implementation :
Changelog:
- 20010106 : (SB) Initial version
- 20050209 : (SB) Check for initial reference added.
data DESCR_REF type ref to CL_ABAP_TYPEDESCR.
data CLASS_KEY type SEOCLSKEY.
data CLASS_NAME type STRING.
Get classname
call method CL_ABAP_TYPEDESCR=>DESCRIBE_BY_OBJECT_REF
exporting
P_OBJECT_REF = I_OBJECT
receiving
P_DESCR_REF = DESCR_REF
exceptions
Please let us know if u have any suggestion to resolve this issue.Hi,
I have configured all the requried settings for extended mail notification in SWNCONFIG. But when i execute SWN _ SELSEN I am getting an error'CX_OS_INTERNAL_ERROR'.
More details are below
"UNCAUGHT_EXCEPTION" "CX_OS_INTERNAL_ERROR"
"CL_OS_SYSTEM==================CP" or "CL_OS_SYSTEM==================CM00L"
"OS_GET_CLASS_AGENT_BY_REF"
Version : 2.0
Precondition : I_OBJECT is not initial and an instance of a
persistent class.
Postcondition : The class agent is active.
OO Exceptions : propagates GET_CLASS_AGENT, CX_OS_INTERNAL_ERROR
Implementation :
data DESCR_REF type ref to CL_ABAP_TYPEDESCR.
data CLASS_KEY type SEOCLSKEY.
data CLASS_NAME type STRING.
Get classname
call method CL_ABAP_TYPEDESCR=>DESCRIBE_BY_OBJECT_REF
exporting
P_OBJECT_REF = I_OBJECT
receiving
P_DESCR_REF = DESCR_REF
exceptions
Please let us know if u have any suggestion to resolve this issue.
Attachment: Error.doc -
Setting step error during Post-Step substep execution
There is custom step type, which defines Post-Step substep:
void __declspec(dllexport) __stdcall PostStep(struct IDispatch* pSeqContextDisp)
AFX_MANAGE_STATE(AfxGetStaticModuleState());
PropertyObjectPtr spThisContext=pSeqContextDisp;
try
return PostStepEx(spThisContext);
catch(_com_error& xComErr)
void PostStepEx(PropertyObjectPtr& spThisContext)
SequenceContextPtr spSeqContext=spThisContext;
StepPtr spStep=spSeqContext->GetStep();
PropertyObjectPtr spResultStep=spStep->AsPropertyObject();
bool fSomeCondition=false;
// Evaluate fSomeCondition
if(fSomeCondition)
spResultStep->SetValBoolean("Result.Error.Occurred", 0, VARIANT_TRUE);
spResultStep->SetValString ("Result.Error.Msg", 0, "Some error message");
spResultStep->SetValNumber ("Result.Error.Code", 0, -1);
return;
// Continue ...
When step of this custom step type is beeing executed and fSomeCondition evaluated to true, the error is displayed:
Details:
"Error executing substep 'Post'.
Some error message"
How to instruct TestStand to not to add prefix "Error executing substep 'Post'." ?
thanks.mishaHello Misha,
If you do not want the "Error executing substep 'Post'." string added to the beginning of your error message, you could use the following method.
You can set only the Error message (Error.Msg) and Error code (Error.Code) and not the Error Occurred Flag (Error.Occurred) in the post step code module. In the post-expression of that step, you can then detect whether the error code is non-zero and set the Error.Occurred flag to True if necessary. See the screen shot below.
Let me know if you have any questions implementing this solution.
Message Edited by JettR on 03-27-2008 02:00 PM
Best Regards,
Software Engineer
Jett R
Attachments:
ScreenShot.jpg 88 KB -
Error during generation of smartform Z0001
Hy guys,
First: I'm working with Netweaver Trial version 7.2 64 bits in Windows 7 HP.
When i try generate any smartform (standard or custom), always appears this error "Error during generation of form ..." [name of smartform]. In ST22 i can see that, the error occurs in function "CALL_FUNCTION_SIGNON_INCOMPL" in program SAPMSSY1.
Debugging SMARTFORMS transaction code, i found the RFC function SSF_NEXT_FMNUMBER, this FM return the number which is use to generate the name of smartform function. When is called from include LSTXBF01 with destination "NONE", the RFC connection fail and can`t return the next number.
I try test RFC connection from Trx. SM59 but always return me this message "RFC error when sending logon data"
Anyone knows how resolve this problem?
Thanks and sorry for grammatical errors.
PD: I copy FM SSF_NEXT_FMNUMBER code in a custom program and with this way i can get the number i need, to modify the variable during debugging for generate the FM of Smartforms, but i'll prefer fix the RFC connection.Hello everybody,
my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
This problem occurs with BW version 3.5 level 17 or below.
Regards,
Priyanka
Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM -
Error during running of Smart Form of Packing list.
Hi,
I am working on packing list using the standard program.
while writing the code in smart-form i am using the SALES_UNIT field of IT_GEN.
but it is giving the error as follows.
*The data object "IS_DLV_DELNOTE" does not have a component called "IT_GEN-SALES_UNIT".*
I have declared IS_DLV_DELNOTE as ledlv_delnote in Form Interface of smartform.
Please help me in above issue.Hi
The structure LEDLV_DELNOTE is having the IT_GEN
if you are using it for delivery then use the above structure
Regards
Shiva -
Printing dunning notices using SMARTFORMS,error during parameter transfer
Hi Friends,
I face a error message "Include text ZGA_DUN_HDR does not exist (object TEXT, ID ST)" when i run the dunning run.
I had searched every node for text ZGA_DUN_HDR in the smartform,I didnt find the text in it.
However when I execute the smart form for print preview an error message "Printing dunning notices using SMARTFORMS,error during parameter transfer".This error i believe is due to wrong parameter passing in the fm 'GET_SF_DUNN_DATA'.It raises an error no_parameters_found.All parameters are passed correctly.
Can you guys help me out.
Edited by: RAJIV KAUSHAL on Nov 14, 2008 6:03 PMyou can create this text ZGA_DUN_HDR in SO10 tcode and try ...
Maybe you are looking for
-
20" Cinema display as 2nd monitor??
Will the 20" Apple Cinema display make a good 2nd monitor for my 20" (non-AL) iMac?
-
I need help. I have a dual 2.4 Mackbook pro running FCP 5.1.4. When I try to print to tape from the timeline, I get a black screen. I have audio, and whenever I park the playhead-that frame shows up on my dvx lcd. If I try to print to video-same thin
-
COMMIT_FOARM IS NOT WORKING INSIDE THE WHEN-MOUSE-CLICK
Dear friends I have following script in when-mouse-click trigger BEGIN IF NOT Form_Success THEN Bell; RAISE Form_Trigger_Failure; END IF; IF :System.Form_Status = 'CHANGED' THEN IF :LOCK_FLAG = 1 THEN UPDATE PROJ.IM_REQUEST_HEADER SET LOCK_FLAG
-
Downloading the SAP NetWeaver 7.0 Java Trial Version
Hi all, I am about to download the SAP NetWeaver 7.0 Java Trial Version from here Link: [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8] My question: After I download it would I need some kind
-
Hi All: I meet with a very strange problem. Try to review my preview code of web dynpro integrated with Adobe interactive form control.But when I right-click the interactive form control, and select "edit" menu,NWDS invoke a error as follow. Error Lo