ERROR ENDED WHILE DELETING CLIENT

I am having ended with error during the client delete. error is down to get help
14052 Maximum Run Time Exceeded

Hi,
could you send more details about this,like whether you scheduled as a background or executed directly.
Regards,
Jagan

Similar Messages

Following error occurs while oracle client 10g installation on Linux 5

Following error occurs while oracle client 10g installation on Linux 5
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

user8862191 wrote:
Following error occurs while oracle client 10g installation on Linux 5
What is Linux 5? Do you mean Oracle Enterprise Linux (OEL) 5 ???
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

SQL error 1562 while import client copy

hi basis guys,
1st of all i export the client thro scc8 of (my prod server) after that i copy the request in dev client.( i extend the table space also.) but
when i m import the client thro stms i m getting the following error
Main import
Transport request___: PRDKT00019
System______________: DEV
tp path : tp
Version and Release: 305.12.78 46D
SQL error 1562 accessing GLPCA: ORA-01562: failed to extend rollback segment numbe
 SQL error 1631 accessing MHIO: ORA-01631: max # extents (300) reached in table SA
 sap_dext called with message no. 4:
DBE_INTERNALERROR
db call info
function: db_xrtab
fcode: RT_MI_LOAD
tabname: MHIO
keylen: 124
key: 500000000010294
retcode: 4
SQL error 1631 accessing : ORA-01631: max # extents (300) reached in table SA
 Main import
End date and time : 20061128194135
Ended with return code: ===> 12 <===
regds
pardeep yadav

Hi,
 Extend the corresponding Tablespace in which the table MHIO resides and also increase the rollback segment.and try once more
Regards
Umesh K

Error Message while Deleting Pages in Adobe Professional 8

I have a massive file that I am trying to delete pages from, but when I get to one specific page, I get an error message that says "An incorrect structure was found in the PDF file." It will not allow me to delete the page. I have, by the way, deleted other pages from that file without incident.
What the heck does that message mean? More importantly, how do I fix it?

Structure = tags: information about the text flow in the document.
Go to the Tags palette and delete all. Then you should be able to
delete the page.
Aandi Inston

TestStand Error -17300 while deleting a step

Hi All,
I have created a custom step which gives a LabVIEW pop up on dropping it in the sequence editor. The pop up has an OK and Cancel button. If I hit OK, the step is placed in the sequence and if I hit Cancel, the step is deleted from the sequence. I am doing this by passing the sequence context into the popup vi and then using the sequence method Delete Step.
Now when i do this practically, the step is getting deleted but after that I'm getting an error from TestStand with Error code -17300. Source: 'TSAPI' "Value invalid or out of range".
Can anyone tell me how to resolve this error. I am using TestStand 2010 and LabVIEW 2010
Thanks and regards,
Nitz

This is likely not an anticipated or supported use case. What is likely happening is that TestStand is trying to select the newly inserted step after your substep is done running, but since you deleted it, it does not exist so it gets an "out of range index" error.
I can't think of a good way to fix this short of writing your own code to do the step insertion. The easiest solution probably is to not do the delete when cancel is pressed, but instead to put the step in a state such that it will always generate a runtime error if used without being specified appropriately.
I have recorded this issue as a change request in our tracking database.
-Doug

Runtime Error 'ITAB_DUPLICATE_KEY' while deleting PDS

Hi All,
The functional user is trying to delete the PDS with the tx '/N//SAPAPO/CULL_RTO_DEL'
PDS = PPDS
PLN VERSIONS = 'DELETE ACROSS ALL MODULES'
MASTER DATA TYPE = iPPE
WE ARE ON = SCM 5.0 SR2 SPS13 + ORACLE 10g + AIX 5.3 [with ALL LATEST KERNAL PATCHES, SP, etc]
Error analysis
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    An entry was to be entered into the table
     "\CLASS=/SAPAPO/CL_CULL_DELETE_RTO\DATA=GS_DELRTO_BUFFER_PPE-OLDEST_ORDERS"
     (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
    The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
    The statement "INSERT INITIAL LINE ..." cannot be used to insert several
     initial lines into a table with a unique key.
Information on where terminated
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Termination occurred in the ABAP program "/SAPAPO/CL_CULL_DELETE_RTO====CP" -
     in METHOD "INSERT_SATID_ORDERS".
    The main program was "/SAPAPO/CULL_DELETE_RTO ".
    In the source code you have the termination point in line 40
    of the (Include) program "/SAPAPO/CURTO_SERVICEI16".
I have implemented a note - 1360600 for PDS DEL Memory related issues.
I have checked the SAP notes and could not got the fix.
Please help and suggest a fix soon.
Regards,
Shyamsundar G C
Cell Ph #: +91 96233-08388

Hi Senthil,
Thanks for the reply, i checked the notes.
For the note 494717, the affected release software component and our existing release does not match [ PI 2001_2_46C and 2006_1_700].
For the note 1358336, the affected release software component 'SAP_APPL Logistics and Accounting' is for ECC system and not SCM system.
We have implemented the Note 1360600, which is related to PDS [its memory issue related to PDS generate]
And i guess the PDS deletion issue started after the note 1360600 implementation.
Regards,
Shyamsundar G C

Error message while deleting files from the tracker

I deleted four files from Acrobat.com before removing them from the desktop tracker and now I don't seem to be able to remove them or stop collecting data on the files in the tracker. Am I missing something or is there not a way to get rid of them?
Rufus Chaney

Please try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

Error while deleting DC from client

In NetWeaver Developer Studio, while i try to remove a Development Component from Client using Delete option, I get the following error. I have synched the DC, built it and deployed + ran it once. However, there are no open activities. This happens for some DCs sometimes, but not always. Any help/inputs/suggestions will be appreciated.
Thanks in advance.
Here are the error details
Error: Action failed.
Problems encountered while deleting resources.
org.eclipse.core.internal.resources.ResourceException: Problems encountered while deleting resources.
 at org.eclipse.core.internal.resources.Resource.delete(Resource.java:656)
 at org.eclipse.core.internal.resources.Project.delete(Project.java:288)
 at com.sap.ide.eclipse.component.provider.actions.dcproject.DeleteProjectActionImpl.run(DeleteProjectActionImpl.java:80)
 at com.sap.ide.eclipse.component.provider.actions.dc.AbstractDcMultiAction$1.run(AbstractDcMultiAction.java:127)
 at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
 at com.sap.ide.eclipse.component.provider.actions.dc.AbstractDcMultiAction.run(AbstractDcMultiAction.java:93)
 at com.tssap.selena.model.extension.action.SelenaActionCollector$GenericElementActionWrapper.run(SelenaActionCollector.java:229)
 at com.tssap.util.ui.menu.MenuFactory$MuSiAction.saveRunAction(MenuFactory.java:1425)
 at com.tssap.util.ui.menu.MenuFactory$MuSiAction.run(MenuFactory.java:1391)
 at com.tssap.util.ui.menu.MenuFactory$DelegateAction.processInternal(MenuFactory.java:616)
 at com.tssap.util.ui.menu.MenuFactory$DelegateAction.access$100(MenuFactory.java:586)
 at com.tssap.util.ui.menu.MenuFactory$DelegateAction$BusyProcessWorker.run(MenuFactory.java:716)
 at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
 at com.tssap.util.ui.menu.MenuFactory$DelegateAction.process(MenuFactory.java:610)
 at com.tssap.util.ui.menu.internal.MenuListenerFactory$ProcessAdapter.widgetSelected(MenuListenerFactory.java:172)
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:89)
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:81)
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:840)
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:2022)
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:1729)
 at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1402)
 at org.eclipse.ui.internal.Workbench.run(Workbench.java:1385)
 at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
 at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
 at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:286)
 at com.sap.ide.eclipse.startup.Main.run(Main.java:795)

Do you really mean "Delete DC" or do you mean "Remove from client"?
A Remove from client just removes the DC from your local system, while a Delete DC removes the DC from the DTR!
In case you really want to delete the DC from the DTR, try just syncing the sources without performing a build.

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

Error while deleting a file which is in a folder which inturn in workspace

12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
--- Problem summary: ---
12:20:42.309 DELETE (FAILED: Conflict [(pre||post)-condition failed: x:concurrency-lock-denied]) Hello.java (C:\CFolder1\WSF1\WSF2\Dev\HelloWorld\Package\Hello.java)
I am getting above error while deleting a file which is in a folder which inturn in workspace

Here is the problem I have with deleting my folder. I had created a WD project TaxTool and and added the DC to my SC. There were obviously some checkedout activities. Being new to this, I deleted the project directly without checking in the activities. Now I have folder TaxTool/_comp with nothing underneath on the DTR server and on my client. I am unable to checkout TaxTool for delete but the checkout of _comp folder fails in NWDS with the following error:
EDIT (FAILED: server response: Conflict [(pre||post)-condition failed: x:no-exclusivity-with-existing-checked-out-resources]) comp (C:\JDI\JDIDEMO1\intelJDI_TEST\dev\inactive\DCs\intel.com\TaxTool\_comp\)
If I try the same from the DTR shell, I get this following error:
Unexpected problem occurred during executing command.Lockfile "C:\Documents and
Settings\bvedamur\.dtr\.syncdbs\5b0d8b2110a7a29883734c0407462df8.syncdbM.lock" is already in use by another process.
I am the only user in the system (doing R&D) and I have tried Sync and Delete. Nothing works. Help appreciated.
Thx
Bhaskar

A fatal error occurred while creating an SSL client credential. The internal error state is 10011.

Need help. I have my pilot lync 2013 pool up (in coexistence with 2010 production environment) and can log into Lync 2013 environment with a lync 2010 client but am not able to with a lync 2013 client. It just prompts for password but will not
take it. I'm sseeing this on my front end server multiple times:
A fatal error occurred while creating an SSL client credential. The internal error state is 10011.
Came across this http://www.logicspot.net/index.php?id=50 and tried disabling TLS 1.2, which I did and verified but yet the issue still exists.
All my certs are good coming from internal CA. My signin logs show below but keep in mind, this works just fine if using a 2010 lync client to my lync 2013 servers. Issue only occurs when trying to connect using a lync 2013 client.
1 Login: FAIL (hr = 0x1)
this request needs authentication, trying webticket from: https://domain.com/WebTicket/WebTicketService.svc
1.1 Get-NewWebTicket: FAIL (hr = 0x1)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
1.1.1 ExecuteWithMetadataInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.2 ExecuteWithWindowsOrNoAuthInternal: PASS
1.1.3 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.4 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Discovery task(0A4FF830) sent to URL http://domain.com completed with hr=0x80f10045
1.1.5 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
Executing wws method with windows auth auth, asyncContext=0A4FC348,
context: WebRequest context@ :173931816
MethodType:4
ExecutionComplete? :1
Callback@ :0A5A1864
AsyncHResult:80f10041
TargetUri:https://domain.com/WebTicket/WebTicketService.svc
OperationName:http://tempuri.org/:IWebTicketService
Error:
There was an error communicating with the endpoint at 'https://domain.com/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '401 (0x191)' with text 'Unauthorized'.
The requested resource requires user authentication.
1.1.6 ExecuteWithWindowsOrNoAuthInternal: FAIL (hr = 0x3d0000)
CLogonCredentialManager::QueryForSpecificCreds() Credential user 0x069B64A0 id=15 querying for specific credentials, credSuccess=2, targetName=Microsoft_OC1:[email protected]:specific:LAD:1
Rich

Hi,
Please check the server role and Web Services for Internet Information Services (IIS) are set correctly.
For the detailed IIS configuration, please check:
http://technet.microsoft.com/en-us/library/gg412871.aspx
As Lync client 2013 attempt to query in order to perform autodiscover of the Lync registration server. First
lyncdiscoverinternal.<sipdomain> Host (A) record and then
lyncdiscover.<sipdomain> Host (A) record. If neither of these records are resolvable then the legacy DNS SRV and A record fall-back process is used. So make sure you have add the two A record in DNS server.
More details:
http://blog.schertz.name/2012/12/lync-2013-client-autodiscover/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make
sure that you completely understand the risk before retrieving any suggestions from the above link.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Error Message AM057 while deleting contact person

Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
Balaji

Dear Balaji
You have asked same question In Different places
Re: Error Message AM057 while deleting contact person in customer master

Error Message AM057 while deleting contact person in customer master

Hi,
Recently, our company consolidated the SAP platforms for two regions and it is single instance now. The data is migrated to the new system by SLO. After this we are facing an issue while deleting the contact person in customer master. When we select the contact person and delete, we get a message saying "Specify a valid person use (PERSON_REFERENCE)". When we press enter, another entry (above the intended entry) gets deleted.
The performance assistant shows nothing but message no. AM057.
Based on the couple of OSS notes I have searched, I checked the table ADRVP entries and found two entries for that contact person. Both entries have the client number appearing in the field APPL_KEY.
The first record is having old client number and the second record is having the new client number. I presume, we are seeing two records because the data was migrated by SLO. But what is confusing is, both are having same addr.no. and marked as X for Owner (Flag: Adress owner object reference).
Data in table ADRVP looks as under.
Cl.     Person            Seq. No.      Table      Field           Application table key      pers.addr. Key      Addr. no.            Owner
300   0200591046          1            KNVK     PRSNR      2000000093060             BP                         0200026699       X
300   0200591046   45333695     KNVK     PRSNR      3000007093060             BP                         0200026699       X
Can there be more than one entry with same addr. no. in table ADRVP for the same person number? Can someone share what is wrong with deleting the contact person in customer master?
Thanks,
Balaji

Balaji Srinivasan wrote:
Based on the couple of OSS notes I have searched,
You should share the OSS note which you got from market place.
Have you checked this note Note 445825 - Error message AM057 when deleting a contact person ?
It has the reason and solution.

Exception caught while loading clients.xml: [object Error] in IE

I’m following lesson 9 from Adobe Dreamweaver CS3
Classroom in a Book which starts with viewing in a browser the
final web page provided on the CD that comes with the book.
The problem is that when I browse that file, IE 7 gives this
error:
quote:
Exception caught while loading clients.xml: [object Error]
Other browsers and versions of IE display the
page fine.
From Dreamweaver I ran Browser Compatibility check and it
reported this:
quote:
Found 1 errors in external css files
Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Netscape
8.0; Opera 8.0, 9.0
Found 2 errors in external css files
Affects: Internet Explorer for Macintosh 5.2
Found 3 errors in external css files
Affects: Safari 2.0
All errors point to this code from the same
line:
href="css/main.css
and the whole line is:
<link href="css/main.css" rel="stylesheet" type="text/css"
media="screen" />
I also ran validation of the file and it reported this:
quote:
2 The tag: "html" doesn't have an attribute: "xmlns:spry" in
currently active versions.[XHTML 1.0 transitional]
114 The tag: "div" doesn't have an attribute: "spry:region"
in currently active versions.[XHTML 1.0 transitional]
117 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
118 The tag: "th" doesn't have an attribute: "spry:sort" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:setrow" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:select" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:repeat" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:odd" in
currently active versions.[XHTML 1.0 transitional]
120 The tag: "tr" doesn't have an attribute: "spry:hover" in
currently active versions.[XHTML 1.0 transitional]
128 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
129 The tag: "div" doesn't have an attribute: "tabindex" in
currently active versions.[XHTML 1.0 transitional]
134 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
143 The tag: "div" doesn't have an attribute:
"spry:detailregion" in currently active versions.[XHTML 1.0
transitional]
The problem is that I don’t know what to do next and if
and how this file can be fixed.
Will appreciate greatly your help
Thank you

Another bump
hoping the experts here might help if they check the files, I
uploaded the project on a public site. You can download it from
here:
http://savefile.com/files/1452147
at he bottom of the page click Download and on the next page
at the bottom click Download file now
These are the troubleshooting steps and solutions I
attempted.
After I ran check Browser Compatibility it showed problems
located in main.css file
I opened main.css and ran Browser Compatibility there too.
The problems were listed as the following:
Error Unsupported property: content
Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh
5.2
line 75 .clearfix:after { content: "."; display: block;
height: 0; clear: both; visibility: hidden; }
Error Unsupported property: zoom
Firefox 1.5; Internet Explorer for Macintosh 5.2; Netscape
8.0; Opera 8.0, 9.0; Safari 2.0
line 82 .clearfix { zoom: 1; }
Error Unsupported value: 'hand'
Safari 2.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
Warning Unsupported value: 'hand'
Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer
for Macintosh 5.2; Netscape 8.0
line 150 .hoverRow, .selectRow{ background-color: #FFFF00;
cursor: pointer; cursor: hand; }
also lines 157
I deleted unsupported properties and changed the unsupported
value of hand to default and saved the main.css.
Unfortunately IE still couldn't render the page showing the
same error.
I searched the CSS Advisor web site and even entire Google
but except a few people reporting the same error no solution was
posted.
I also tied to contact the publisher of the book but I didn't
get any replies with solutions yet.
Since this is a learning project I'm trying to prepare myself
for real live scenarios and wonder what experienced users would do
when facing a similar problem if the project was for a client. What
would you do. What is an acceptable practice? If you can't find a
solution what would you say to your clients "well IE 7 can't render
certain things from your page and there is nothing I can do about
it"?
I'll appreciate any input

"Error occurred while launching. The end of the file was reached" ?

I have OS 9.2.2 and, recently, OS X 10.3.9, installed on my machine. I have not yet transferred my Outlook Express files to MAIL. Yesterday, I was attempting to clean out my Outlook Express DELETE files when I noticed that I had hit the wrong key and was deleting my IN files. I couldn't stop the process,so I turned off my machine. Now, whenever I try to connect with Outlook Express, I get the message "Error occurred while launching. The end of the file was reached". Now, Outlook Express is no longer supported by Microsoft, so it's time to change to Safari, anyway, but I have many files in Outlook Express that I want to save. Can anything be done?

David,
No solutipn yet, but I'm still hopeful. However, I would appreciate your comments on the following:
1. I still could not open Outlook Express, even after rebuilding the desktop--twice--and downloading it again. However, I just noticed that you recommended the use of a OS 9 CD, not a download. I'll look around for the CD if you feel that's the only way to go. Is it?
2. When I downloaded the OS 9 Outlook Express, the window said to copy it to my Hard disk. I assume that means just to drag the Outlook Express icon to the top of the Hard Disk icon. Is that correct?
3. If all else fails, what about those programs that have been around for years that facilitate the retrieval of otherwise lost files. Would such a program be helpful in this case? If so, can you mention a few of them? I want to retain some of those files, even if it means having to spend a hundred dollars or so for the necessary software.
4. Yes, such mishaps can indeed be painful. Fortunately, although I am a bit of a fumble-fingers, the problems I have encountered since I bought my set in 1999 as the result of such clumsiness have been few. It looks like I've been lucky, but that I am paying for it now.
iMac DV (Special Edition) Mac OS 9.1.x

ERROR ENDED WHILE DELETING CLIENT

Similar Messages

Maybe you are looking for