"Error occurred while launching. The end of the file was reached" ?

I have OS 9.2.2 and, recently, OS X 10.3.9, installed on my machine. I have not yet transferred my Outlook Express files to MAIL. Yesterday, I was attempting to clean out my Outlook Express DELETE files when I noticed that I had hit the wrong key and was deleting my IN files. I couldn't stop the process,so I turned off my machine. Now, whenever I try to connect with Outlook Express, I get the message "Error occurred while launching. The end of the file was reached". Now, Outlook Express is no longer supported by Microsoft, so it's time to change to Safari, anyway, but I have many files in Outlook Express that I want to save. Can anything be done?

David,
No solutipn yet, but I'm still hopeful. However, I would appreciate your comments on the following:
1. I still could not open Outlook Express, even after rebuilding the desktop--twice--and downloading it again. However, I just noticed that you recommended the use of a OS 9 CD, not a download. I'll look around for the CD if you feel that's the only way to go. Is it?
2. When I downloaded the OS 9 Outlook Express, the window said to copy it to my Hard disk. I assume that means just to drag the Outlook Express icon to the top of the Hard Disk icon. Is that correct?
3. If all else fails, what about those programs that have been around for years that facilitate the retrieval of otherwise lost files. Would such a program be helpful in this case? If so, can you mention a few of them? I want to retain some of those files, even if it means having to spend a hundred dollars or so for the necessary software.
4. Yes, such mishaps can indeed be painful. Fortunately, although I am a bit of a fumble-fingers, the problems I have encountered since I bought my set in 1999 as the result of such clumsiness have been few. It looks like I've been lucky, but that I am paying for it now.
iMac DV (Special Edition)   Mac OS 9.1.x  

Similar Messages

  • An error occurred while launching/running the application

    We've been using Web Start to deliver one of our products for over 2 months. We're getting about 10 downloads of our application a day which is very good considering we're in a very niche market (mapping applications). However, some customers (about 20%) are having a number of problems with Web Start either during installation or during download. For this reason we had to create a stand alone installer for customers that couldn't get Web Start working or more commonly could get Web Start working but couldn't download our application. The most common problem we see is the 'Unable to load resource' problem. I've attached the different errors and different exceptions sent from a customers site. Can you spread any light on this. Is it to do with Web Start not being able to identify the proxy?
    Many thanks in advance
    Ian
    Launch
    An error occurred while launching/running the application.
    Title: OS MasterMap Viewer
    Vendor: Snowflake Software
    Category: Download Error
    Unable to load resource: http://www.snowflakesoft.co.uk/app/viewer.jnlp
    Exception
    JNLPException[category: Download Error : Exception: java.net.UnknownHostException: www.snowflakesoft.co.uk : LaunchDesc: null ]
    at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
    at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
    at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
    at com.sun.javaws.Launcher.downloadResources(Unknown Source)
    at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
    at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
    at com.sun.javaws.Launcher.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Wrapped
    java.net.UnknownHostException: www.snowflakesoft.co.uk
    at java.net.InetAddress.getAllByName0(Unknown Source)
    at java.net.InetAddress.getAllByName0(Unknown Source)
    at java.net.InetAddress.getByName(Unknown Source)
    at java.net.Socket.<init>(Unknown Source)
    at sun.net.NetworkClient.doConnect(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.openServer(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.net.www.http.HttpClient.<init>(Unknown Source)
    at sun.net.www.http.HttpClient.New(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at java.net.HttpURLConnection.getResponseCode(Unknown Source)
    at com.sun.javaws.util.URLUtil.doesURLExist(Unknown Source)
    at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
    at com.sun.javaws.cache.DownloadProtocol.isLaunchFileUpdateAvailable(Unknown Source)
    at com.sun.javaws.LaunchDownload.getUpdatedLaunchDesc(Unknown Source)
    at com.sun.javaws.Launcher.downloadResources(Unknown Source)
    at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
    at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
    at com.sun.javaws.Launcher.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)

    Apologies for the lack of response only I bust my knee a week ago and I've been in agony since. Anyway enough moaning.
    Yes users are behind a firewall. From what I can get from Sun the problem stems from JWS's inability to detect script based proxies. This is very frustrating because we have about 25% of our customers that just can't use JWS because of this. Ok so they could type it in manually, however, how many system support people are going to give out those sorts of details to end users, besides most end user don't even know what a proxy is!
    To get around this we've provided a standalone installer (which defies the point of JWS in the first place). Don't get me wrong I think JWS is an amazing piece of software, however, I can't see how JWS can be used successful across the internet until this is solved, intranet, extranet fine.
    In our experience you can't leave 25% of your customer base behind!

  • Error occurred while launching/running the application.

    Hello all,
    I'm using the "tutorial" demo from Vamp, and
    here's what
    happened after I chg the jnlp file:
    1. Enabling MIME type on my HTTPD server
    2. Disabling the proxy of my IE Browser
    3. Installed /jdk1.3
    4. JWS started with the following error:
    GENERAL:
    An error occurred while launching/running the application.
    Title: 4. Java Web Start Resource Loading Tutorial
    Vendor: Gerald Bauer
    Category: Download Error
    Corrupted JAR file at http://hpsgnnec/tutorial.jar
    Exception:
    JNLPException[category: Download Error : Exception: java.util.zip.ZipException: error in opening zip file : LaunchDesc: null ]
         at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
         at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    LAUNCH FILE
    <jnlp
    spec="1.0+"
    codebase="http://hpsgnnec" >
    <information>
    <title>4. Java Web Start Resource Loading Tutorial</title>
    <vendor>Gerald Bauer</vendor>
    <description>Tutorial on how to load resources </description>
    <icon href="tutorial.gif"/>
    <offline-allowed />
    </information>
    <resources>
    <j2se version="1.3"/>
    <jar href="tutorial.jar"/>
    </resources>
    <application-desc main-class="vamp.tutorial.Main">
    </application-desc>
    </jnlp>
    WRAPPED EXCEPTION:
    java.util.zip.ZipException: error in opening zip file
         at java.util.zip.ZipFile.open(Native Method)
         at java.util.zip.ZipFile.<init>(Unknown Source)
         at java.util.jar.JarFile.<init>(Unknown Source)
         at java.util.jar.JarFile.<init>(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol$RetrieveAction.actionDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
         at com.sun.javaws.cache.DownloadProtocol.getResource(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
         at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
         at com.sun.javaws.Launcher.downloadResources(Unknown Source)
         at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
         at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Wud appreciate any advice.
    THanks much,
    Jessica

    Try downloading the jar file itself and opening it with winzip or checking its contents with jar tf <jarfile name>
    if it is indeed corrupt (as the exception stacktrace seems to indicate) try mailing the person who wrote the demo so that he can check whether the jarfile is there or not, and whether it is corrupt or not.
    Other than that, nac.
    Jeremy

  • Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

    I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
    "An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
    Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
    Administrators
    CSAdministrator
    Domain Admins
    Domain Users
    Enterprise Admins
    Group Policy Creator Owners
    RTCComponentUniversalServices
    RTCHSUniversalServices
    RTCUniversalConfigReplicator
    RTCUniversalServerAdmins
    Schema Admins
    I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
    Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Found Parameter: Role Value master.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcxds validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcxds validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcxds.
    Checking state for database rtcxds.
    State of database rtcxds is detached.
    Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
    Attaching database failed because one of the files not found. The database will be created.
    State of database rtcxds is DbState_DoesNotExist.
    Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
    Clean installing database rtcxds.
    Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    ****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
    Initializing DbSetupBase
    Parsing parameters...
    Found Parameter: SqlServer Value lync.lctbu.com\rtc.
    Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
    Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
    Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
    Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
    Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
    Sql version: Major: 11, Minor: 0, Build 2100.
    Sql version is acceptable.
    Validating parameters...
    DbName rtcshared validated.
    SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
    DbFileBase rtcshared validated.
    DbPath D:\CsData\BackendStore\rtc\DbPath validated.
    Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
    LogPath D:\CsData\BackendStore\rtc\LogPath validated.
    Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
    Checking state for database rtcshared.
    Reading database version for database rtcshared.
    Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
    Thanks and Regards,
    Thanh Le

    Thanks Lạc
    Phạm 2
    I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue. 
    If any one using KVM here is detail article 
    We just  give this option cache=‘writeback
    using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks 

  • Error : "A network error occurred  while accessing this document on the internet"

    When i try to open un large pdf file (120 Mo with many picture inside), an error appears : "A network error occurred  while accessing this document on the internet. Would you like to close the document or reload it" .  But if i try to "save as" the pdf on my disk, it's work. 
    I also try to change the option to open the pdf directly in the Adobe reader and it's work.  But if i retry to open the pdf in the browser, the error reappears.
    The file is located on a secure server (https) with a user and password.
    Does anyone know how to fix it? 
    Thanks!

    Ankit_Jain wrote:
    Thanks for providing the information. Could you also let me know which browser is being used to access the PDF?
    I try with Internet Explorer 6 and 8.
    Ankit_Jain wrote:
    Also, do smaller sized PDFs open successfully at your end?
    Yes it does
    I also tested with French and English versions. Acrobat Professional X seems to react the same way but Adobe Reader 9 works!

  • Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

    ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
    MESSAGE, READS  a network error occured while attempting to read from the file  C:WINDOWS\installer\iTunes.msi

    All sorted now just needed to repair itunes from control panel

  • A network error occurred while accessing this document on the internet

    Dear all,
    I am now facing a very unusual problem that, when I try to open a pdf file from internet, it says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?". Here's my situation:
    Browser: IE8 (or Chrome 35.0.1916.153)
    Adobe Reader: 11.0.0
    OS: Win7
    1.Directly open from IE. Says: "A network error occurred while accessing this document on the Internet. Would you like to close the document or reload it?"
    2.Try to download(Save AS). In IE, says: "The connection was reset The connection to the server was reset while the page was loading"; In Chrome, nothing happened, but still can't download.
    3.Try to disable the "PDF Reader Addon" in IE8. First the browser needs to download the PDF file, but failed, see point 2.
    1.I can open the same PDF file from another network, that is, out of my company.
    2.I can open another PDF file in the network of my company, but the pdf is created by another scanner
    3.All PDFs from both scanner can be opened locally.
    So, here's the possible problem, the network settings, and(or) the PDF. Does anyone ever meet this situation, please help?
    Thank very much.
    Li

    Rave,
    IE: 8 & 9
    Adobe Acrobat Pro/Acrobat Reader 10.x & 11.x
    Chrome: work fine
    So the answer is to manually enable and disable websites based on whether the pdfs open within the browser.  That doesn't seem like a great long-term solution to have have our users to manually enable / disable browser integration.  We have web applications that work better with browser integration turned on.  Is this something that Adobe will fix or is it an IIS/IE issue.
    It appears the Adobe removed the #1 config option that you lised in the new 11.x versions of both products.  The manage Add-ons does not disable the browser integration on the new Adobe versions.

  • A network error occurred while trying to communicate with the server.

    Hello All,
    I am getting some new error messages when opening the server app on my Mac Mini server running OS X 10.8.2 and Server 2.2.1. First I get a message that says "A network error occurred while trying to communicate with the server." and then after trying to open some of the service panes, I get additional errors that say "Multiple errors occurred on the server while processing commands." The services don't load and I just see "Error Reading Settings" in the server app.
    I started to get these errors when I added a new website to the server. All the services are working fine but I cannot access them in the server app.
    In console I'm seeing these errors when I try to access various services:
    2/24/13 8:02:12.692 PM Server[956]: Error: The server '10.0.1.150' reported an error while processing a command of type: 'readSettings' in plug-in: 'servermgr_dns'. Error: Error Domain=XSActionErrorDomain Code=499 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c4003a760 {NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., originalError=Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk." UserInfo=0x7f8c3f547db0 {NSURLErrorFailingURLPeerTrustErrorKey=<SecTrust 0x7f8c40599080 [0x7fff7711ffd0]>, NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, NSUnderlyingError=0x7f8c3d58c0b0 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk.", NSErrorPeerCertificateChainKey=(
        "<SecCertificate 0x7f8c3f6747e0 [0x7fff7711ffd0]>"
    ), NSLocalizedDescription=The certificate for this server is invalid. You might be connecting to a server that is pretending to be “10.0.1.150” which could put your confidential information at risk., NSErrorFailingURLKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorFailingURLStringKey=https://10.0.1.150:311/commands/servermgr_dns, NSErrorClientCertificateStateKey=0}}
    I have already restarted the server and used terminal to stop and start postgres. Any more thoughts on how to repair this?

    Just as I had suspected, the whole GUI crashed because of certificate problems. After two and a half hours with enterprise support, it turns out the com.apple.servermgrd certificate in the server keychain had become corrupt.
    We determined this by typing https://127.0.0.1:311 into Safari and we could see all the server modules and interact with them through the web interface. All the services were working properly as well so we knew that it was just the Server.app GUI that simply couldn't read settings that was causing the problem.
    So, first we closed the server app. Went into /var/servermgrd and deleted all the files from this folder. Then, in Keychain, deleted the com.apple.servermgrd certificate. Did a search for com.apple.servermgrd in Keychain and deleted everything else that came up for it.
    Then restarted the server. Now the server app was able to properly connect to the services in the background and read them properly. This was the jist of the troubleshooting that solved the problem. It also seems like DNS is causing problems because that is the only service that will not read right but is functioning properly in the background.
    I will post an update once Apple figures out what is wrong with DNS. Hope this helps anybody else having these problems.

  • BO CMC Crystal Reports : An error occurred while creating a subprocess in the processing server. [RCIRAS0603]

    Hi All,
    I am getting "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]"  error while opening the previous instances of the crystal report in BOCMC.
    I am trying to run or schedule the report but it is always going to "PENDING STATUS".
    (Previously it was resolved after restarting the server. Error : problem in ProcessingServer)
    Could you please suggest.
    Details :
    Crystal Reports 2008
    Clarity 13
    Server Details:
    BO XI 3.1 SP5
    OS : Red Hat 6
    Patch X11
    Symptom
    " Crystal Reports 2008/2011/2013 Processing Server fails to create child
    processes after applied X11 client libraries security update on Redhat
    Linux 6
    " "An error occurred while creating a subprocess in the processing server.
    [RCIRAS0603]" error occurs when viewing the Crystal Reports in InfoView/BI

    Hi Rajeev,
    This is a known issue you can refer to below note,
    2098659 - "An error occurred while creating a subprocess in the processing server. [RCIRAS0603]" error occurs after applied X11 client libraries security update on Redhat Linux 6
    Regards,
    ~Shree

  • An error occurred while creating a subprocess in the processing server.

    Hi,
    I have developed a Crystal Report using CR 2008 with SAP BW as the datasource. The report is executing fine in CR 2008, but when saved to the BOE, in Infoview it is throwing the following error:
    An error occurred while creating a subprocess in the processing server. [RCIRAS0603]
    Did anyone face similar issue? Is there any resolution for the same.?
    I have deleted the report from enterprise and saved it back, still facing this problem.
    Appreciate your help in this regard.
    Thanks
    Ravi

    Crystal Reports processing (CR Page) server is not operational.
    There could be many reasons for this.
    CR processing server traces will need to be enabled and analysed by support.
    You should also be on the latest patch release.
    Sometimes following steps help :
    1) Stop all of the XI 3.1 processes using the ./stopservers command (ensure they are all down before proceeding)
    2) Once all processes are stopped ensure the serverpids directory is empty
    <install dir>/bobje/serverpids/
    If any files are within the 'serverpids' folder, remove them.
    3) Go to bobje/tmp
    Remove any MW, .MW, mw, .mw and regss files and/or directories
    4) Go to /tmp
    Remove any MW, .MW, mw, .mw, and regss files and/or directories
    5) start servers back up.
    If this doesn't help - you'll need to open a Support Incident

  • An error occurred while trying to communicate with the web browser.

    I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
    Only the FF browser is open.
    When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
    When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
    [Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
    Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
    Thank you!

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Adobe Shockwave for Director Netscape plug-in, version 10.2
    # Adobe PDF Plug-In For Firefox and Netscape 8.2.4
    # Shockwave Flash 10.0 r22
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Adobe Reader]] plugin to the latest version.
    *http://get.adobe.com/reader/otherversions/

  • While updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    while updating the older version iTunes to latest one it shows "a network error occurred while attempting to read from the file: C:\windows\installer\iTunes64.msi. pls help on this matter to connect my i5 to PC. Thanks in advance

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to download itunes, can someone help me with this?

    I am getting "a network error occurred while attempting to read from the file c:\windows\installer\itunes.msi" when I attempt to install itunes.  Can anybody help me to resolve this issue?

    You can try disabling the computer's antivirus and firewall during the download the iTunes installation
    Also try posting in the iTunes forum since it is not an iPod touch problem.

  • An error occurred while applying SQL script for the feature BackendStore.

    Hello,
    I am using my AD in Windows Azure VMs. I created new VM of A3 (4 cores, 7 GB Memory) Windows Server 2012 R2, Port 1433 MSSQL added, made it a member of Domain and planned to install first Lync Server 2013 on it.
    In "Setup or Remove Lync Server Components" of "Install or Update Lync Server System", got an Red Coloured text "An error
    occurred while applying SQL script for the feature BackendStore."
    I have not enabled monitoring and archiving server in topology builder. I added "Network Service" and assign "Full Control" in Security Permissions of "C:\CsData" and "C:\LyncShare".
    I executed the SQL Setup Wizard and upgraded any instance to 2012.
    Please guide.
    Thanks, Divyaprakash Koli

    Please check you have enough disk space for the disk where the folders are.
    Check view log for detailed log information.
    The following link is a similar thread for you to refer:
    http://social.technet.microsoft.com/Forums/lync/en-US/a3cb9ab0-7451-4df5-af96-3d2784d1b075/an-error-occurred-while-applying-sql-script-for-the-feature-backendstore-for-details-see-the-log?forum=lyncdeploy
    Lisa Zheng
    TechNet Community Support

  • Trying to update to iTunes 10.4.1 and I get a message "A network error occured while attempting to read from the file C:|Windows|Installer|iTunes.msi"  Running WIndows 7 with all updates done.  I  have never had an issue with iTunes updating before.  Anyo

    iTunes has tried to update itself and runs into an error and tells me to manually install.  When I d/l and run the iTunesSetup.exe file I always encounter the following error message...
    "A network error occured while attempting to read from the file C;|Windows|Installer|iTunes.msi" and iTunes does not update to iTunes 10.4.1.
    Anyone know what is creating this error message?  Thanks for the help...

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page): 
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for