Error- Enter no more than one partner type of location

Hi,
Iam using SRM4.0,
iam facing one error message "Enter no more than one partner type of location"when user approving the shopping cart
pleae needs your help
Raghuveer.B

Hi,
check whether the note 1155724 is relevant four your release (the text may be not relevant, but the coding shold help).
If you have any BBP_DOC_CHANGE_BADI implementation deimplement it and retest.
Regards,
Peter

Similar Messages

Another document series- do I need to tick Permit More than one doc type?

Hello experts,
Im thinking of creating another document series for Goods Return and Credit Notes to be used only when they are created due to user errors in GRPO o AP Invoices.
In order to do this, Do I need to tick the option of "permit more than one doc type per series"?
Looking forward to your comments,

Hi,
If you select "permit more than one doc type per series", you must know the consequence. It may cause you more troubles when you want to distinguish the document types within the series.
Thanks,
Gordon

Error: You have more than one Creative players connected. - Recovery Tool for ZEN

My Zen 4GB cannot be turned on anymore after a failed firmware upgrade (The installation hung up). I tried to run the firmware upgrade executable file again but the player must be on. So I tried to hardware reset by switching the power slide on while pressing the play button, but it still doesn't start. I downloaded and ran the Recovery Tool while the player was connected, but an error message appeared: "ERROR: You have more than one Creative players connected. Please remove all but one, click "OK" to exit and then run this program again." - There was no other players connected but the ZEN. Please help... What can I do

I have this very exact same problem with the same model. Did you ever find a solution to this?

E-Mail not send when relevant BP is in more than one partner function

Dear all,
i am facing an big issue.
My e-mail action does not work if the bp of the recipient is stored in more than one partner function in this incident.
Is this a know bug ? What can i do about that?
Best Regards
Daniel
Edited by: Daniel Titze on Feb 15, 2012 12:58 PM

Hi, Daniel.
I didn't met such a problem, but I happened to find this Knowledge Base Article (note №1521582 "Solution Manager: no mail is sent to processor of the message if sender and receiver are the same"):
https://websmp130.sap-ag.de/sap(bD1ydSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3135323135383226
Hope it will be helpful.

Permit more than one document type per series

Hi folks,
Please let me know what is the precise use of :
"permit more than one document type per series"
Cheers...
Jitu

Hi
Certain country regulations permit document numbering series that contain more than one document type.
All of these documents are part of the same numbering series.
Select this option if these regulations are relevant for the company.
This setting determines the settings that are displayed in certain Document Numbering windows,
and cannot be changed after it has been selected.

Sending more than one expense type via E-Mail possible?

Hi to all!
Is it possible to send more than one Expense Type via E-Mail to the CfTE system? If yes: How can I create it?
Thanks for an answer!
Andreas

Hi Andreas,
if you add several attachments to an e-mail, the system will create a separate expense for each attachment. One of these expenses will also get the information from the subject line of the e-mail.
Apart from the attachment scenario, there is no option to create several expense based on a single e-mail.
Regards,
Andreas

Rendering Error when using more than one DataSheetView on a Enterprise Wiki-Page

Hi Experts,
how to reproduce:
Add two Custom Lists with some Fields (Add Lookup-Columns to both Lists).
Add a DataSheetView to each List and mark it as Default-View
Create a Enterprise Wiki-Page
Add a WebPart (Custom-List-1)
You will see the Content from List 1 as DataSheet-View (because it is the Default-View)
Add another WebPart below the previous added WebPart (Custom-List-2)
You will see the Content from List 2 as DataSheet-View (because it is the Default-View)
Notice that the First DataSheet has faulty Rendering. The Lookup-Columns having more than one 'Arror-Down' Image and it is even on the left. If you click into different Column, different row you get the same.
I can reproduce this behaviour anytime.
Environment: SharePoint 2013 Enterprise, IE10
If you use Development-Tools to identify first datarow of first DataSheet you can see that it has to do something with the related <Input>-Tags:
<div class="combobox-placeholder" id="jsgrid_combobox" style="left: 27px; top: 32px; width: 117px; height: 29px; border-top-color: currentColor; border-right-color: currentColor; border-bottom-color: currentColor; border-left-color:
currentColor; border-top-width: 0px; border-right-width: 0px; border-bottom-width: 0px; border-left-width: 0px; border-top-style: none; border-right-style: none; border-bottom-style: none; border-left-style: none; visibility: inherit; ; direction: ltr; min-width:
117px; background-color: transparent;">
<input class="cb-textbox " style="width: 156px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown" class="combobox-img" style="height: 29px;"
dir="ltr" type="button" value="▼"/><input class="cb-textbox " style="width: 84px; height: 25px;" dir="ltr" type="text"/><input tabindex="-1" title="Dropdown"
class="combobox-img" style="height: 29px;" dir="ltr" type="button" value="▼"/>
Please have a look into it. Current Workaround for me is to have a Default-ListView in first WebPart. But then Customer has to click the Edit-Button to Change the Item in the releated EditForm. This is a Show-Stopper here!
With Best Regards,
Ronny

Hi Ronny,
According to your description, the lookup column would render incorrectly when adding more than one datasheet view in the Enterprise Wiki page.
I tested the same scenario per your post, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Can we have more than one Transaction type in Interaction Center in 7.0

We are currently upgrading from CRM 5.0 to 7.0. We have an Interaction Center that has about 30 transaction types defined in the action boxes that we want to use in the CRM Web UI in 7.0. Is it possible to use more than one Business Activity (Sales) transaction in the WebUI? I see that you can configure them for follow-ups but when I view the Business transaction profile configuration , it only allows me to apply 1 transaction , say 0010 or ZC01. When I launch the Web UI, I see the transaction say ZC01 in the upper left corner. We would like to be able to launch the Web UI and the ability to create activities for more than 1 transaction type. Is this possible ?

Can we pull employee from one trusted system and in the same way can we pull some contractors from other trusted system simultaniously?
yes you can. In the schedule task you'll have to put your query in such a way that it brings both data.
Can both trusted systems can be active at the same time pulling two types of users from two trusted systems?
You have to run both recon in sequential manner so that it can pull correct data for OIM
Some where i read in doc that only one target system can be designated as trusted system if it as has more than one the recons will not work properly...
I don't think that it results into issue. But we have to see the sequence mainly. Otherwise it will results into wrong data

Error whiile updating more than one user

If the resultset contains one value, my code works fine. I get an error when there are more than one users. any thoughts?
try
tcResultSet moResultSet= moUserUtility.findAllUsers(mhSearchCriteria);
for (int i = 0; i < moResultSet.getRowCount(); i++)
moResultSet.goToRow(i);
Date dteCourseEndDate=moResultSet.getDate("USR_UDF_MYFIELD");
int intUserKey = moResultSet.getIntValue("Users.Key");
Calendar calCurrentDate = Calendar.getInstance();
Date sampleCurrentDate= calCurrentDate.getTime();
if(dteCourseEndDate.before(sampleCurrentDate))
Hashtable<String,String> moUpdateUser = new Hashtable<String, String>();
moUpdateUser.put("USR_UDF_MYotherFIELD", "");
moUserUtility.updateUser(moResultSet, moUpdateUser);
thanks
Veena

You will need to search based on the Users.Key or another unique value to get only a single set when you perform the update. So your first search is to get all the users that match your criteria, then you need to perform a second search for the individual user when you do the update.
-Kevin

What do I do if one contact I need to enter has MORE THAN ONE ADDRESS

What if I want to enter someone's home and work address under the same card? Can I do that? Or if someone has a summer house... Can I put more than one address under the same card and name?

Can I put more than one address under the same card and name?
Yes, but you can only send email to one of those addresses when you use that contact. That is, you have to pick a default address for the card when you send an email to that person or company.
Mulder

Block with more than one table type agurment - Update Procedure for Block

Hi,
I have one form with 3 Block. First Block is single row block, and other 2 are details block . The details balocks are based on the Procedure datasource, because of the complex query conditions. Now my requirement is When Inserting / Updating the Master Block (Single Row Block), I need to get the values in the two details block , because I need to update some other tables also based on these values. I created a procedure with two Table Type parameters (for each details block) , but when I using this procedure as the Update Procedure Name in the block, I am getting the error Only One table type arguement is allowed. Is there any other method to implement this.
Thanks in advance.

Rizly,
A quick summary to make sure I understand your requirements. You have a single row base table master block with two detail blocks that are based on Procedures. When you update the single row base table master block, you need all of the data in the two procedure based detail blocks as there are updates that you have to perform to other tables that use this data. You have created a stored procedure that take two PL/SQL tables as parameters, but you are getting the error that only 1 table parameter is allowed.
I need to ask you a few questions first. What is your Forms version? The stored procedure you created; are you using this procedure in the "On-Insert, On-Update, On-Delete" triggers or do you call the procedure in one of the Base Table block ("Key-Commit, When-Button-Pressed" or other trigger)? When you modify or add a new Master block record are you adding values to the detail blocks or using values from the previous Master block record?
If you are using your procedure in the On-Insert, On-Update or On-Delete trigger(s), then based on your description, the error you are receiving is correct. The "On-..." triggers are constrained in that their procedures expect only a single PL/SQL table, Table of Records or Ref Cursor as a parameter. This is a Forms constraint - not a PL/SQL constraint as Forms is expecting you to only perform actions on the block where the "On-..." Trigger is located.
Perhaps you should consider creating a database Package that has two package specification constructs (Ref Cursor, Table of Records, etc) you can populate from Forms and then simply call the package procedure that will use the Ref Cursors to perform the needed update or inserts.
Hope this helps.
Craig...
If mine or someone elses response was helpful, please mark it accordingly

Employee Split commission for more than one partner

Hi
any body help me..
How to maintain sales employee split comission for more then one partners
has to be sales employees assigned in sales document item level, and pricing condition types are created in same number as sales employes.

You cannot do it in customizing, use a custom program.
Roberto

Delivery address in PO with more than one address for storage location

Hi All,
Can you please let me know how the storage location addresss gets picked up in a PO where the storage location has more than more address defined in customizing. How can we control the address in the PO ?
Regards,
Ashwin

The purchase order will take the first storage location address. User exit EXIT_SAPLMMDA_001 allows you to select one of the other addresses if you wish. For more details refer to OSS Note 498153 - FAQ: Addresses in the purchasing.

Error while importing more than one Contact Persons

Hi experts,
I am trying to import 2 Contact Persons in the same Business Partner using DI.
My issue is that only on the second Contact Person all fields are correct. On the first Contact Person, all fields except the "Name" are blank.
Has anyone seen that before?
Thank you in advance,
Aris

Hello Aris,
Could you post your code? I think you don't add a line or set the line correct.
See this example from the sdk-help:
Private Sub cmdTest_Click()
   On Error GoTo ErrorHandler
   Dim vCompany As SAPbobsCOM.Company
   'create company object
   Set vCompany = New SAPbobsCOM.Company
   'set paras for connection
   vCompany.CompanyDB = "SBODemo_US"
   vCompany.Password = "manager"
   vCompany.UserName = "manager"
   vCompany.Server = "(local)"
   'connect to database server
   If (0 <> vCompany.Connect()) Then
      MsgBox "Failed to connect"
      Exit Sub
   End If
   Dim nErr As Long
   Dim errMsg As String
   'do it now
   Dim vBP As SAPbobsCOM.BusinessPartners
   Set vBP = vCompany.GetBusinessObject(oBusinessPartners)
   vBP.CardCode = "HU1003"
   vBP.CardName = "ABCD"
   vBP.CardType = cCustomer
   vBP.CommissionGroupCode = 0
   vBP.CommissionPercent = 15
   vBP.Company_Private = cPrivate
   vBP.ContactPerson = "C1"
   vBP.Currency = "$"
   vBP.DiscountPercent = 15
   vBP.VatLiable = vLiable
   vBP.ShippingType = 3
   Call vBP.ContactEmployees.Add
   Call vBP.ContactEmployees.SetCurentLine(0)
   vBP.ContactEmployees.Name = "C1"
   vBP.ContactEmployees.Address = "LN"
   vBP.ContactEmployees.E_Mail = "c1atabcd.com"
   vBP.ContactEmployees.Fax = "8433777778"
   vBP.ContactEmployees.MobilePhone = "8388888"
   vBP.ContactEmployees.Phone1 = "88880000"
   Call vBP.ContactEmployees.SetCurentLine(1)
   vBP.ContactEmployees.Name = "C2"
   vBP.ContactEmployees.Address = "BJ"
   vBP.ContactEmployees.E_Mail = "c2atabcd.com"
   vBP.ContactEmployees.Fax = "84338"
   vBP.ContactEmployees.MobilePhone = "877388888"
   vBP.ContactEmployees.Phone1 = "8888300"
   If (0 <> vBP.Add()) Then
       MsgBox ("Failed to add an business partner")
   Else
       Dim objCode As String
       MsgBox ("Succeeded add a business parnter, new objcode=" + vBP.CardCode)
       vBP.SaveXml ("c:\temp\BP" + vBP.CardCode + ".xml")
   End If
   'Check Error
   Call vCompany.GetLastError(nErr, errMsg)
   If (0 <> nErr) Then
       MsgBox ("Found error:" + Str(nErr) + "," + errMsg)
   End If
   'disconnect the company object, and release resource
   Call vCompany.Disconnect
   Set vCompany = Nothing
   Exit Sub
ErrorHandler:
   MsgBox ("Exception:" + Err.Description)
End Sub
HTH Regards Teun

More than one class type for a Material

Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja Durai

Hi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R

Error- Enter no more than one partner type of location

Similar Messages

Maybe you are looking for