More than one class type for a Material
Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja Durai
Hi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R
Similar Messages
-
More than one insp. types for a material
Dear all
If two insection types are assigned for a material e.g, for a raw material insp. types 1 and 5 have been assigned.then please guide me from where this material will pick characteristic separately for each.
Following steps i have taken already.
i-maintained material specs for insp. type 1 and insp. plan for insp. type 05.so for type 1 it will pich characterstics from material specs and for insp. type 05,it 'll pick from insp. plan.is it right way.or any better suggestion somonecan give.Simpy use QP01 like you would normally. If you want to include the material number and plant on the first screen you can. In the header, select the appropriate task list usage for the inspection type.
You should review in SPRO which usages are assigned to which inspection types. You may need to change or modify them from what SAP delivers.
From 6.0
Task list
Usage Short text Assigned insp. types
1 Production
2 Engineering/design
3 Universal 04, 89
4 Plant maintenance
5 Goods receipt 01, 05, 07, 08
51 Goods receipt model
53 GR external process.
6 Goods issue 02, 10, 11,12
7 Returns 06
9 Material check 09, 15, 16, 17
99 Production Rework
You can change these in SPRO under "Maintain inspection types". You can also add and create your own usages under the "General" section of "Quality Planning" in SPRO.
Craig -
How to have more than one free good for a material ?
Hi everyone,
we have this requirement from the user where he wants give more than one free good for a material.
As far as i know we can configure only one free good for a material in standard SAP.
if have any idea about how to achieve this please guide me how to configure the same in SAP.
thank you in advanceHi
Check my two links where I have explained this.
Free goods using Sale order BOM methodology
Different business scenarios and Sales BOM techniques for header and item level stock and prices
Thank$ -
Creating more than one serial number for a material upon Goods Receipt
I am trying to configure the system to create more than one serial number automatically for a material and have the equipment record created at the same time with the same number as the serial number. For example using MB1C, receiving a material for a quantity of 2, the Maintain Serial number pop up box appears, selecting the 'Create serial number automatically' , I receive an error message ' Number of numbers to be assigned must be 1
Message no. NR030
Can someone help me with this issue.I have tried MIGO and get the same error. The Plant data/stor 2. tab of the material master for this particular material is set as follows
Serial no. profile NS01 SerLevel 1 Keep equipment number and serial number synchronous.
Would there be configuration missing? -
More than one storage bin for a Material
if a Material is maintained in more than one bin,what stock placement strategy will be be better,normally the client uses Fixed bin but some materials are placed in more than one bin.
Regards,
TafanzaHi
If u r using chemical sort of thing, fixed bin will be better.
Or otherwise next empty bin will do.
Regards,
Raman -
Is it possible to maintain two class type for a material
Dear All,
Is it possible to maintain two different class type for a material.
If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
How to handle this scenario.
Please explain.
Regards,
Mullairaja
Edited by: MullaiRaja on Jan 5, 2011 5:19 AMMr.Raja
As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
We can assign many classes to a single class type of a material.
For configurable material, create the material using material type : KMAT.
& then, activate the 'batch management" control in the material master, for that material.
Pls revert with feedback.
Hope, that helps you.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst - SAP SD/MM -
EJB3 - More than one remote interface for Session Bean?
Hi,
Is it possible in EJB3 to have more than one remote interface for a SessionBean?
I have seen it posetd on here that it is possible but never been able to find any other information.
Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
1. Is this a JBoss specific limitation?
2. Is there another way of performing the JNDI lookup?
Thanks,
Alan.Hi,
Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
+- XXXBean (class: org.jnp.interfaces.NamingContext)
| | +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
Can anyone confirm this?
Alan. -
More than one class in single java source file?
Is there a way to define more than one class in single java source file?
I get a duplicate class definition error for each extra class, but I am sure there is a way to handle this in JDeveloper.
Anyone knows how ?Please post the question in jdeveloper forum at
JDeveloper and ADF
for quick response.
Regards,
Anupama
http://otn.oracle.com/sample_code/content.html -
Can we query more than one class in a call to .tmib
Hi,
i am creating a utility to monitor the applications at run time using mib.any
body have an idea if we can query more than one class in one call to .tmib.
thanks
roopeshThat would be an interesting enhancement, perhaps using Embedded FML to
pack multiple MIB requests into one buffer.
Product Management makes all decisions about major enhancements, and it
is based on customer need, so that's where the requests should go.
Scott Orshan
roopesh wrote:
>
yes.
i am trying to devlop a utility which can monitor
applications at runtime.i wanted to make as less the
no of calls to tmib as possible but one class does
not give all the information so i need to query
more than one.
anyways thanks for the reply.
"MS" <[email protected]> wrote:
Hi,
Are you trying to write a Tuxedo app health-check monitor utility.
A tuxedo client can make different calls to .TMIB service for different
classes.
I don't think we can query more than one class in a single call.
Are you looking for something else??/
HTH
regards
MS -
Permit more than one document type per series
Hi folks,
Please let me know what is the precise use of :
"permit more than one document type per series"
Cheers...
JituHi
Certain country regulations permit document numbering series that contain more than one document type.
All of these documents are part of the same numbering series.
Select this option if these regulations are relevant for the company.
This setting determines the settings that are displayed in certain Document Numbering windows,
and cannot be changed after it has been selected. -
Another document series- do I need to tick Permit More than one doc type?
Hello experts,
Im thinking of creating another document series for Goods Return and Credit Notes to be used only when they are created due to user errors in GRPO o AP Invoices.
In order to do this, Do I need to tick the option of "permit more than one doc type per series"?
Looking forward to your comments,Hi,
If you select "permit more than one doc type per series", you must know the consequence. It may cause you more troubles when you want to distinguish the document types within the series.
Thanks,
Gordon -
Sending more than one expense type via E-Mail possible?
Hi to all!
Is it possible to send more than one Expense Type via E-Mail to the CfTE system? If yes: How can I create it?
Thanks for an answer!
AndreasHi Andreas,
if you add several attachments to an e-mail, the system will create a separate expense for each attachment. One of these expenses will also get the information from the subject line of the e-mail.
Apart from the attachment scenario, there is no option to create several expense based on a single e-mail.
Regards,
Andreas -
How can I maintain more than one contact person for a supplier
Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AMDear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN -
How can I create more than one printer queue for a printer
I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/ -
More than one Planning plant for a maintenance plant.?
hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?
Hi,
You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran.
Maybe you are looking for
-
Problem with Icelandic special characters on Mac
Hello I am working on a Flash publication for students, and I want it to run on Mac as well as PC. Everything goes fine, except a problem with three special characters in my language, Icelandic. I am working on a registration and login page where I a
-
SELECT T0.[DocNum], T1.[DocNum], T2.[BaseRef] FROM ORDR T0 , OPOR T1 INNER JOIN POR1 T2 ON T1.DocEntry = T2.DocEntry WHERE T2.BaseRef=T0.DocNum i have problem in this query it is showing that sale order who purchase order is posted but my client want
-
Recently I've been spammed a lot with fake emails saying they're from apple with the request to change my iTunes/iCloud password or to login to check some details. As I'm a professional IT dude I love to check how those scam things work.. and guess w
-
How 2 convert numeric value to character value?
Hi friends, I want to convert numeric value to the character value. Is there any FM available? Points rewared soon. Regards Ronn
-
Error uploading role in GRC CUP5.2
Hello, I have uploaded role in GRC CUP5.2 for 1 system sucessfully,but when i try to upload for another system it says 0 object uploaded sucessfully out of 50. Moreover i tried creating role munally,it does. again i tired to upload by dleting all exc