Error/Exception in Marketing Attributes
Hi all,
I try to create a new Attribute set with attributes in the CRM 7.0 WebUI. Unfortunately, I get an exception when calling the appropriate transaction in the MARKETINGPRO role which makes it impossible to create an attr. set:
Cannot display view ATRAE_SET/ATTRIBUTES of UI Component ATRAE_SET
An exception has occurred
Exception Class CX_SY_DYN_CALL_PARAM_MISSING - Call of the method GET_V_UNIT_OF_MEASUREMENT of the class CL_ATRAE_SE_ATTRIBUTES_CN00 failed; the obligatory parameter IV_INDEX has not been filled
Method: CL_BSP_WD_CONTEXT_NODE=>GET_V_S_STRUCT
The component ATRAE_SET is available as are the classes and method. As far as I can see all necessary services have been acticated. Can anyone help?
Thanks in avance
Sander
Hi,
Can you check at which point in code the GET_V method is getting called? Also check the parameters of the GET_V method. If you have a mandatory IV_INDEX parameter, you may try to make it optional and see if you still get the error.
Regards
Prasenjit
Similar Messages
-
Error in Marketing Attribute Update
HI All,
I need to update the Marketing attribute of the BP. For this i tried using below mentioned FM
1. CRM_MKTBP_ASSIGN_ATTRIBUT
2. CRM_MKTBP_CHANGE_BP
Now i am facing a strange issue here. My code is able to update BP half of the time and half of the time Not at all.
Doesn't return any error OR warning, but not working.
Is there any thing else which i can try Or any limitation on Marketing attribute, I simply have no idea how to resolve this.
Any help is deeply appreciated.
DaveHI Prerna,
Thanks a lot for the reply...
I tried your approach, but still not able to resolve it.
I am not getting any error in the return table. It shows success. But when i go to BP transaction and then to Marketing attribute tab, i don't see any Attribute Set assigned to BP.
When i go to Edit Mode and manually assign attribute set, It shows me the values passed by me, but even there also if i save BP, Attribute set is not getting saved.
I am thinking it might be a bug, did any body else has faced similar problem with Marketing attributes?
If yes, what is the Solution for this and did you raised any OSS?
FYI, We are working on CRM 7 Ehp1.
I am able to find One Error. When my program is calling FM CRM_MKTBP_ASSIGN_ATTRIBUT_TAB. It is raising an exception.
Exception is 'CX_SY_OPEN_SQL_DB'. In the FM at line 340 there is a statement:
INSERT ausp FROM TABLE lt_i_ausp.
This is the place where exception is raised.
I am looking for a Note for this, but if some body has any idea on this, Please share.
Dave
Edited by: Dave on Sep 19, 2011 12:28 PM -
Error at the time of Marketing Attributes Assignment to BP
Dear Experts ,
I am facing some problem at the time of assignment of marketing attributes to a BP. it is giving me an error saying "Inconsistent characteristic value assignment".
Please guide me how to go about it.
Regards,
NikhilHello Nikhil,
Check the data type of the attribute in txn:CRMD_PROF_CHAR and check for the length , data type etc.
In txn:BP , while assigning the value to your attribute , please make sure that it fits into that data type and length.
Hope this helps!
Best Regards,
Shanthala Kudva. -
Error When Creating/Inserting New Marketing Attribute Value
Merry Christmas & Happy New Year,
Need help here, when I create/insert new marketing attribute value in existing marketing attribute, I encounter the following error "The values currently maintained lead to inconsistencies in the database".
In the detail error, it specifies that I was trying to change existing attribute which is not true.
Initially i thought it was authorization issue, but when i do the same procedure in CRM GUI, it works fine, only from Web UI then i encounter the problem.
Any lead is really appreciated.
JDHi Robert,
thanks for the info, we did implement the note but still having the error.
we also have implemented following notes but it still does not solve the issue yet.
0001486409 Incorrect counting in CRM_MKTPFCHR_CHECK_STRING_BW
0001490425 Nonsensical values for marketing attributes
0001491491 Field DATUV in AUSP for newsletter scenario
0001499712 Marketing Attributes are not saved properly in WEB UI
0001509448 MKT ATTR:Save value for marketing attribute impossible
0001531447 Problems in CL_CRM_BUIL_MKT_ATTRIB~READ -
Error message while creating marketing attributes
I get a message 'express document "update was terminated" recieved from author' while creating and saving a marketing attribute. The attribute gets created and I can assign them as well. I would like to know why I am getting this message and am I missing something?
I am using CRM 5.0 online.
Regards
AniYou should check if there is a dump in ST22..... If there is one, then you can find the cause there... Most of the times it is an Authorization Issue.
Thanks,
Ranjan -
Marketing attribute not assignable with language PL
Hi *,
I have detected a strange behaviour when maintaining "some/special" marketing attributes for BP in logon language PL.
The affected attributes are configured as follows.
Format No. Chars Dec.Places Meas. unit Sing-val
Numeric Format 3 0 % X
The usage for EN/DE is fine but when trying to maintain a value like '30' using logon language PL the below mentioned error occurs. But obviously I don't use intervals etc. Just a single figure.
Attributes with the following settings do not lead to an issue:
Format No. Chars Dec.Places Meas. unit Sing-val
Numeric Format 10 0 X
DETAILS ON ERROR-MESSAGE
Diagnosis
Possible causes:
Intervals can only be specified if you have set the indicator Intervals
Allowed.
You must specify the interval in the form value 1 - value 2 (there must be a
space both before and after the hyphen). No other character except a hyphen may
be used to separate the values.
A value can contain up to the same number of decimal places as specified in
the Decimal Places field.
The value in the field Number of Chars defines the total number of
characters, including decimal places (for example: If the number of characters =
3, and the number of decimal places = 1, then 20.1 is valid, but 300.1 is not
valid).
You must define the decimal point and the thousand separator according to
your user settings.
Procedure
Use the value help, if available, to select a permitted
value. If there is no value help available, check the data type of the marketing
attribute."
To exclude the possibilty the attribute could be "damaged" I created a new one with same options and got the same language dependend behaviour.
Any ideas?
Kind regards
ThomasAny ideas/impressions?
-
BAPI : Marketting Attribute upload 'CRM_MKTBP_ASSIGN_ATTRIBUT_TAB'
Hi,
I am trying to upload with prospects and marketting attribute simultanously at that only prospects are uploading but marketting attribute are not uploading.
this is the error we got : an entry with the same value alredy exists for attribute
you cannot aasign more than one value to attribute
format art & abc is invalid for attribute value below my code please guide me.
constant : ls_att_set TYPE CRMT_MKTPROF_KEYS-PROFILE_TEMPLATE_ID VALUE 'GENERAL'.
wa_partner-partner = BAPI_BP1.
APPEND wa_partner TO iT_partner.
CLEAR wa_partner.
wa_attrib-atname = 'CODE'. "Marketing attr name
wa_attrib-atvalue = WA_FILE-PROF_CHARACT_VA. "Marketing attr value
APPEND wa_attrib TO it_attrib.
wa_attrib-atname = 'type'. "'type'."wa_file-char_desct. "Marketing attr name
wa_attrib-atvalue = WA_FILE-PROF_CHARACT_VA_2. "Marketing attr value
APPEND wa_attrib TO it_attrib.
CALL FUNCTION 'CRM_MKTBP_ASSIGN_ATTRIBUT_TAB'
EXPORTING
iv_attribute_set = ls_att_set
iv_commit = 'X'
iv_obtyp = 'BUT000'
TABLES
it_partner = it_partner
et_return = it_return3
it_attributes = it_attrib.
sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
please guide me.Hi,
I uploaded bp prospects then now i am going to upload marketting attribuutes so here i am going to use code but i am not able to upload it's showing error i am not able to see in internal table also and how i can pass my bp id to this program.please advice me.just i am passing only 2 marketting attribute and bp id.please kindly check this code.
*& Report YPROSPECT_UPLOAD_001_WA
REPORT YPROSPECT_UPLOAD_001_WA.
DATA : BEGIN OF WA_FILE,
PARTNER TYPE but000-PARTNER,
PROF_CHARACT_VA TYPE CRMD_MKTTGGRP_PT-PROF_CHARACT_VA,
PROF_CHARACT_VA_2 TYPE CRMD_MKTTGGRP_PT-PROF_CHARACT_VA,
GUID TYPE CRMT_MKTBP_PARTNER_TAB-PARTNER_GUID,
END OF WA_FILE.
DATA : IT_FILE LIKE TABLE OF WA_FILE.
DATA : IT_RETURN3 LIKE TABLE OF BAPIRET2,
WA_RETURN3 LIKE LINE OF IT_RETURN3.
DATA : BEGIN OF WA_PARTNER OCCURS 0.
INCLUDE STRUCTURE BU_PARTNER.
DATA:END OF WA_PARTNER.
DATA : IT_PARTNER LIKE TABLE OF WA_PARTNER.
*data it_partner like BU_PARTNER. "BU_PARTNER.
DATA : BEGIN OF IT_ATTRIB OCCURS 0.
INCLUDE STRUCTURE CRMT_MKTPROF_COMW.
DATA:END OF IT_ATTRIB.
*DATA : IT_ATTRIB LIKE TABLE OF WA_ATTRIB.
DATA : ls_att_set TYPE CRMT_MKTPROF_KEYS-PROFILE_TEMPLATE_ID VALUE 'GENERAL'.
DATA : FP_FILE LIKE RLGRAP-FILENAME.
*& F4 HELP
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = ' '
MASK = ' '
CHANGING
FILE_NAME = FP_FILE
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& GUI UPLOAD
DATA : L_FILE TYPE STRING.
L_FILE = FP_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILE
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_FILE
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
To upload marketing attributes
wa_partner-partner_guid = ."<BP guid>.
wa_partner-partner = bapi_bp1."<BP ID>.
APPEND wa_partner TO IT_partner.
CLEAR wa_partner.
To upload marketing attributes
LOOP AT IT_FILE INTO WA_FILE.
wa_partner-partner_guid = WA_FILE-GUID.
it_partner-PARTNER = WA_FILE-PARTNER.
APPEND wa_partner TO iT_partner.
CLEAR wa_partner.
it_attrib-atname = 'ATR1'."'"wa_file-char_desct. "Marketing attr name
it_attrib-slwrt = WA_FILE-PROF_CHARACT_VA. "Marketing attr value
APPEND it_attrib.
it_attrib-atname = 'ATR2'.""wa_file-char_desct. "Marketing attr name
it_attrib-slwrt = WA_FILE-PROF_CHARACT_VA_2. "Marketing attr value
APPEND it_attrib.
CALL FUNCTION 'CRM_MKTBP_CHANGE_BP'
EXPORTING
iv_profile_template_id = ls_att_set
iv_xdescr = ' '
iv_fcode = 'C'
iv_msa = 'X'
iv_commit = 'X'
iv_partner = IT_PARTNER
TABLES
it_imp_seltab = it_attrib[]
et_return = it_return3.
*CALL FUNCTION 'CRM_MKTBP_ASSIGN_ATTRIBUT_TAB'
*EXPORTING
*iv_attribute_set = ls_att_set
*iv_commit = 'X'
*iv_obtyp = 'BUT000'
*TABLES
*it_partner = it_partner
*et_return = it_return3
*it_attributes = it_attrib[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'.
ENDLOOP.
loop at it_return3 into wa_return3.
write : / 'ERROR MESSAGE BP ATTRIB ', wa_return3-message.
endloop.
Edited by: rose01 on Aug 22, 2010 1:47 PM -
Error in dataservice for attributes
hi,
We created a dataservvice for our xml DB. We have an element tag (a reference) with an attribute. We are using a namespace for the element. On executing it we get the following error:
weblogic.xml.query.exceptions.XQueryDynamicException: {err}XQ0027: Validation failed: error: cvc-complex-type.3.2.1: Attribute not allowed (no wildcards allowed): discountprice in element price@http://temp.openuri.org/XMLFiles/inventory.xsd
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.giveToken(XMLValidatorForXMLBeans.java:169)
at weblogic.xml.query.schema.ValidatingIterator.fetchNext(ValidatingIterator.java:148)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at com.bea.ld.wrappers.xml.XmlFileIterator.fetchNext(XmlFileIterator.java:100)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:161)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:274)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
Caused by: weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans$ValidationException: null
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans$ExceptionCollection.add(XMLValidatorForXMLBeans.java:340)
at org.apache.xmlbeans.impl.validator.Validator.emitError(Validator.java:175)
at org.apache.xmlbeans.impl.validator.Validator.emitFieldError(Validator.java:207)
at org.apache.xmlbeans.impl.validator.Validator.emitFieldError(Validator.java:193)
at org.apache.xmlbeans.impl.validator.Validator.attrEvent(Validator.java:675)
at org.apache.xmlbeans.impl.validator.Validator.nextEvent(Validator.java:247)
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processBeginAttributeToken(XMLValidatorForXMLBeans.java:1160)
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processToken(XMLValidatorForXMLBeans.java:1318)
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.processTokensOnHold(XMLValidatorForXMLBeans.java:1349)
at weblogic.xml.query.schema.xmlbeans.XMLValidatorForXMLBeans.giveToken(XMLValidatorForXMLBeans.java:115)
at weblogic.xml.query.schema.ValidatingIterator.fetchNext(ValidatingIterator.java:148)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at com.bea.ld.wrappers.xml.XmlFileIterator.fetchNext(XmlFileIterator.java:100)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:101)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:161)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.iterators.ItemIterator.fetchNext(ItemIterator.java:86)
at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:274)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
at weblogic.xml.query.xdbc.util.Serializer.processElement(Serializer.java:281)
at weblogic.xml.query.xdbc.util.Serializer.process(Serializer.java:206)
at weblogic.xml.query.xdbc.util.Serializer.serializeItems(Serializer.java:152)
Please let us know if we are doing something wrong.
Thanks,
BharathYour data does not match the schema. You can validate with XmlSpy or some other tool for a second opinion.
The error message indicates an attribute 'discountprice' was found where none was expected. (perhaps it should be some_ns:discountprice).
- Mike R -
Populating CRM marketing attributes using the APD
Hi Experts
We are having problems with populating CRM marketing attributes using the APD. When we run our process we get the error message:
CRMBW_ATTR_WRITE005: Error when processing function module CRMBW_UPDATE_BPMKT_5. Message no. RSAN_MDL024
As you can see, we are using the new function module CRMBW_UPDATE_BPMKT_5 since the old CRMBW_UPDATE_BPMKT did not work either.
Do we have to add a reference to a infoobject in transaction CRMBWTARGETS? We have not done this because the marketing attribute in CRM doesnt have decimals and all the objects in BI have. Could this be the cause of the error?
Kind regards
ErikHi Ramesh,
Thanks for quick reply.
I have already followed the procedure you have described. Since there is not common objects between ODS and Bpatner infoobject, i am not able to do mapping.
for eg. my ZBPARTNER infoobject has attributes like zfooty, ztennis and zrugby but my ODS has char name , char value, counter for multiple values infoobjects.
I am following the example in the demo content to work out the process but could not understand how the data is getting uploaded from ODS to Business partner.
http://help.sap.com/saphelp_nw70/helpdata/en/bf/5df63bf9deaf09e10000000a114084/frameset.htm
Thanks,
Sandeep Jogde -
Problems with Import of Business Partner Marketing Attributes
Hello everyone,
I've a little problem. We are on CRM 5.0 now and I want to migrate the business partners with marketing attributes in the new system via LSMW. I've therefore wanted to implement the SAP message 609236. But I've problems with creating the function module ZCRM_MKTBP_CRMOU_WRITE 'Write marketing attributes for BP (event)'.
I copied all the source of the SAP message and I've create the export and changing parameters. But the checking programm tells me that he can not loop over the
'C_BP_STRUCT'. It 'is not defined as internal table and not in the table parameters'. But if I want to create it as a table parameter (instead of changing parameter), the following error message arrises: "Only table types may be used as the reference type for a table parameter"
What can I do here? Perhaps anyone of you has already implemented this SAP message.
Thanks in advance
NicoleAre you moving data from a SAP CRM to a SAP CRM system, or from a legacy system to a SAP CRM system?
Michael. -
ERROR: exception symbol "09732" not found in resource file
I am trying to get a client to work with workflow services. I get 'ERROR: exception symbol "09732" not found in resource file' in the output when the method queryTasks is excecuted.
Jdeveloper 10.1.3.4 and SOA Suite 10.1.3.3.0
Any ideas?
Eydun
------------------ program ---------------------
package project1;
//import com.oracle.services.bpel.task.Task;
import java.util.ArrayList;
import oracle.bpel.services.workflow.client.IWorkflowServiceClient;
import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory;
import oracle.bpel.services.workflow.query.ITaskQueryService;
import oracle.bpel.services.workflow.verification.IWorkflowContext;
import java.util.List;
import oracle.bpel.services.workflow.repos.Ordering;
import oracle.bpel.services.workflow.repos.Predicate;
import oracle.bpel.services.workflow.repos.TableConstants;
import oracle.bpel.services.workflow.task.ITaskService;
import oracle.bpel.services.workflow.task.model.Task;
public class Class1 {
public Class1() {
public void TryTask() {
try {
//Create JAVA WorflowServiceClient
IWorkflowServiceClient wfSvcClient =
WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.WSIF_CLIENT);
//Get the task query service
ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
//Login as jstein
IWorkflowContext ctx = querySvc.authenticate("jstein",
"welcome1",
null, //Use default realm
null);//Not logging in on behalf of another user
//Set up list of columns to query
List queryColumns = new ArrayList();
queryColumns.add("TASKID");
queryColumns.add("TASKNUMBER");
queryColumns.add("TITLE");
queryColumns.add("OUTCOME");
//Create a predicate to query tasks that have a null outcome
String outcome = null;
Predicate predicate = new Predicate(TableConstants.WFTASK_OUTCOME_COLUMN,
Predicate.OP_EQ,
outcome);
//Create an ordering to order tasks by task number
Ordering ordering = new Ordering(TableConstants.WFTASK_TASKNUMBER_COLUMN
,true //Ascending order
,false //Nulls last
//Query a list of tasks assigned to jstein
List tasks = querySvc.queryTasks(ctx,
queryColumns,
null, //Do not query additional info
ITaskQueryService.ASSIGNMENT_FILTER_MY,
null, //No keywords
null, //predicate, //Only tasks with no outome set
ordering, //Order by ascending task number
0, //Do not page the query result
0);
//Get the task service
ITaskService taskSvc = wfSvcClient.getTaskService();
//Loop over the tasks, outputting task information, and approving tasks
for(int i = 0 ; i < tasks.size() ; i ++)
Task task = (Task)tasks.get(i);
int taskNumber = task.getSystemAttributes().getTaskNumber();
String title = task.getTitle();
String taskId = task.getSystemAttributes().getTaskId();
//Set the outcome
taskSvc.updateTaskOutcome(ctx,taskId,"APPROVED");
System.out.println("Task #"+taskNumber+" ("+title+") is APPROVED");
catch (Exception e)
//Handle any exceptions raised here...
System.out.println("Caught workflow exception: "+e.getMessage());
public static void main(String[] args) {
Class1 class1 = new Class1();
class1.TryTask();
------------------- output ---------------------
C:\java\jdk1.6.0_07\bin\javaw.exe -client -classpath C:\jdev11work\eej\mywork\Application3\Project1\classes;C:\oracle\jdev10134bpellibs\bpel\lib\bpm-infra.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-common.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-thirdparty.jar;C:\oracle\jdev10134bpellibs\j2ee\home\jazncore.jar;C:\oracle\jdev10134bpellibs\j2ee\home\oc4jclient.jar;C:\oracle\jdev10134bpellibs\lib\xml.jar;C:\oracle\jdev10134bpellibs\lib\xmlparserv2.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\config;C:\oracle\jdev10134bpellibs\webservices\lib\orasaaj.jar;C:\oracle\jdev10134bpellibs\webservices\lib\soap.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\lib\bpm-services.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\schema;C:\oracle\jdev10134bpellibs\bpel\lib\olite40.jar;C:\oracle\jdev10134bpellibs\jdbc\lib\ojdbc14.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel.jar;C:\oracle\jdev10134bpellibs\wsclient_extended.jar project1.Class1
<::> WorkflowService:: TaskQueryService.authenticate(): called. user = jstein identityContext = null onBehalfOfUser = null
<::> WorkflowService:: VerificationService.authenticateUser: attempting for user = jstein identityContext = null
<ISConfiguration::load> Found Configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::load> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::load>
<ISConfiguration::validate> Validate configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::validate> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::validate>
<ISConfiguration::save> Save IdentityService configuration file into /C:/oracle/jdev10134bpellibs/bpel/system/services/config/is_config.xml
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: begin
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: call authenticate
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: user is authenticated!
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: end
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLIdentityService::init> Load provider initialization complete
<XMLAuthenticationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMIdentityImpl::getActions> BPMIdentityImpl::getActions()
<BPMIdentityImpl::getAllGrantedRealmRoles> Identity has the following granted realmRoles=[RealmRole: BPMWorkflowReassign, RealmRole: BPMWorkflowSuspend, RealmRole: BPMAnalyst]
<RoleProperties::load> Resource oracle/tip/pc/services/identity/role.properties is loaded, s_properties={BPMWorkflowSuspend=SUSPEND,RESUME, BPMWorkflowAdmin=ADMIN, BPMWorkflowReassign=REASSIGN, BPMPublic=VIEW_WORK_LIST,ACQUIRE,WITHDRAW,ESCALATE,ERROR,PUSH_BACK,RENEW,RELEASE,REQUEST_INFO,SUBMIT_INFO,CUSTOM,VIEW_TASK_HISTORY,VIEW_SUB_TASKS,UPDATE,ADHOC_ROUTE,OUTCOME_UPDATE_ROUTE, BPMSystemAdmin=, BPMWorkflowViewHistory=VIEW_TASK_HISTORY,VIEW_PROCESS_HISTORY, BPMAnalyst=VIEW_REPORTS}
<BPMIdentityImpl::getActions> Identity has the following roles:[BPMWorkflowReassign, BPMWorkflowSuspend, BPMAnalyst]
<BPMIdentityImpl::getActions> Role: BPMWorkflowReassign
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, REASSIGN]
<BPMIdentityImpl::getActions> Role: BPMWorkflowSuspend
<BPMIdentityImpl::getActions> Actions: [RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE]
<BPMIdentityImpl::getActions> Role: BPMAnalyst
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, VIEW_REPORTS]
<BPMIdentityImpl::getActions> Identity has the following actions:[RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, RENEW, ADHOC_ROUTE, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, VIEW_WORK_LIST, ERROR, ESCALATE, RELEASE, REASSIGN, VIEW_REPORTS]
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: VerificationService.authenticateUser: successful for user = jstein identityContext = null
<::> WorkflowService:: TaskQueryService.authenticate(): completed. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ==
<::> VerificationService.createWorkflowContext: Request NOT authenticated by WS-Security framework
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: TaskQueryService.queryTasks(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein displayColumns = TASKID, TASKNUMBER, TITLE, OUTCOME optionalInformation = assignmentFilter = My keywords = null predicate = null ordering = wfn.taskNumber ASC startRow = 0 endRow = 0
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My keywords = null predicate = null
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): completed. assignmentFilterPred = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): completed. combinedPredicate = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
ERROR: exception symbol "09732" not found in resource file.
<::> ORABPEL-09732
<::>
<::>
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:231)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
<::> at project1.Class1.TryTask(Class1.java:55)
<::> at project1.Class1.main(Class1.java:91)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
<::> ... 7 more
<2008-10-14 23:59:00,952> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
at project1.Class1.TryTask(Class1.java:55)
at project1.Class1.main(Class1.java:91)
Caught workflow exception:
Process exited with exit code 0.Although the versions 10.1.3.4 and 10.1.3.3 are close and should be able to use 10.1.3.4 JDev for most 10.1.3.3 development, the human tasks is the one exception. 10.1.3.3 had a few bugs fixed therefore the jar file used in JDev 10.1.3.4 may not be compatible with 10.1.3.3.
I would either use JDev 10.1.3.3 or upgrade SOA Suite to 10.1.3.4
cheers
James -
Hi,
I have installed OER-11g version 11.1.1.7 and am successfuly able to open Asset Editor , ImpExp utility and also could harvest SOA and OSB components.
Issue 1:
However while trying to open the Navigator of the harvested components in OER console, a new window opens with two sections ( top and bottom). The top one which is a diagram view doesn't open with an error - Missing required permissions attribute in main jar: http://localhost:7101/oer-web/applets/components.aler-thinkmapclient-11.1.1.7.0.jar.
Please find the screenshot below.
Issue #2 : While trying to browse for the Assets from OER console. The below error is seen ( missing permissions for components.jexplorer-11.1.1.7.0.jar)
Could someone direct me on how to solve this issue. Appreciate your help !
Thanks and regards,
Sridhar.It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar -
Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
RavitejaHi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K -
Marketing attributes creation/update from ELM
Hi Experts.
A small question regarding the external list management.
I have created a mapping format with some marketing attributes I want to create/update for a certain business partner. This works fine in the sense that the system is fully capable of updating if there already exist a marketing attribute of the same type for the BP, and create if there is none already.
Also, if the marketing attribute I try to upload allows multiple value, the system is clever enough just to add an additional and not overwrite the existing. So, this part is fine:-)
The issue arises when I want use the mapping format for marketing attributes and leave some columns blank (= I have a standard format I use, but for some BP's, I do not want to upload all marketing attributes, only some in the format). When I try to upload this, I get an error message saying the the value blank is not allowed for a certain marketing attribute. This is true, but I find it rather stupid if the system cannot simply ignore the blank entries in a file, since I would then need to create a new mapping format for every single BP!
Does anyone know how to fix this?
I can see that it is possible to add code for every single field in the mapping format, so I was thinking to write a small piece of code that the system should ignore the values that are blank. Have anyone tried this?
Thanks and Regards, MiaIndeed this is something we encountered as well.
Possible work around (we implemented like this, you can't leave ELM file field blank but upload fake value) is creating a fake value for your attribute (for example: " not yet maintained", "to be filled in"). In that way a BP is made with attribute but with no "real" value... to your business to deside if this is an acceptable way of working!
Kind regards,
Francis
Edited by: FDEV on May 28, 2008 11:35 AM -
Can not delete marketing attribute set
I am trying to delete an 'Attribute Set' & Attribute. I have managed to delete the attribute but when trying to delete the attribute set i get the error - Attribute Group ZIC_PTS_BP Still Contains Business Partners.
I have ran - CRM_MKTPFTPL_DELETE_ATSET which seemed to delete all the assigned entries but I still can't delete the attribute set
any ideas?
regards
BarryThe attribute set is not geeting deleted since it has been assigned to some buisiness partners, which can be seen in the marketing attributes tab page of the business partner.
Delete the assignment first, than only you will be in a position to delete your attribute set.
*If helpful, Do reward points*
Regards,
Shalini Chauhan
Maybe you are looking for
-
Java.lang.NullPointerException while reimporting model
Hi All, I have a Web Dynpro project that contains several models. When I try to add a new RFC (by reimporting the model) I get java.lang.NullPointerException. I can add the RFC to a new model without any problem but I need to add it to this specific
-
Batch Job to Create and Send Excel Reports Using!!!
Hello at all, i have a Report which is created by an Query. My question is, how can i know if this report have a batch-job in background or not?? I want to know if their is existing any job for this report??? OTHER QUESTION, is: Is it possible to cre
-
Hi All, Can you help with a problem I am facing. I have the requirement to add a new condition type to a MM pricing procedure. Upon recomendation from SAP I beleive that I should do this by copying the old one to a new code. My problem is this. We cu
-
User and global function not resolved and not visible in expression editor
Testing ODI 11.1, I'm trying to affect the value of a (project) variable with a project function result within an ODI package. My text variable is actually affected but with the litteral name "myfunction('myarg')" instead of its proper result (implem
-
Ssh to Web Host from static IP works -- will fail if change to dynamic IP?
Folks: Opening an OS X terminal window and uttering % ssh <myuser_name>@<my_sitedomain> has worked flawlessly for me for years. I depend on plain old ssh to maintain sites. BUT, my ADSL service is static IP, for which I pay a premium. I'd like to cha